devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Stephen Boyd <sboyd@kernel.org>,
	Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>,
	Brian Norris <computersforpeace@gmail.com>,
	Kamal Dasu <kdasu.kdev@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Sebastian Siewior <bigeasy@linutronix.de>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-clk@vger.kernel.org, iommu@lists.linux-foundation.org,
	linux-mtd@lists.infradead.org, linux-rtc@vger.kernel.org,
	linux-usb@vger.kernel.org
Subject: [PATCH] dt-bindings: More dropping redundant minItems/maxItems
Date: Tue, 13 Jul 2021 13:34:53 -0600	[thread overview]
Message-ID: <20210713193453.690290-1-robh@kernel.org> (raw)

Another round of removing redundant minItems/maxItems from new schema in
the recent merge window.

If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.

This condition is partially checked with the meta-schema already, but
only if both 'minItems' and 'maxItems' are equal to the 'items' length.
An improved meta-schema is pending.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-clk@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/clock/brcm,iproc-clocks.yaml      | 1 -
 .../devicetree/bindings/iommu/rockchip,iommu.yaml         | 2 --
 .../bindings/memory-controllers/arm,pl353-smc.yaml        | 1 -
 Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml  | 8 --------
 .../devicetree/bindings/rtc/faraday,ftrtc010.yaml         | 1 -
 Documentation/devicetree/bindings/usb/nxp,isp1760.yaml    | 2 --
 6 files changed, 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
index 8dc7b404ee12..1174c9aa9934 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
@@ -50,7 +50,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 3
     items:
       - description: base register
       - description: power register
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
index d2e28a9e3545..ba9124f721f1 100644
--- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
@@ -28,14 +28,12 @@ properties:
       - description: configuration registers for MMU instance 0
       - description: configuration registers for MMU instance 1
     minItems: 1
-    maxItems: 2
 
   interrupts:
     items:
       - description: interruption for MMU instance 0
       - description: interruption for MMU instance 1
     minItems: 1
-    maxItems: 2
 
   clocks:
     items:
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
index 7a63c85ef8c5..01c9acf9275d 100644
--- a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
@@ -57,7 +57,6 @@ properties:
 
   ranges:
     minItems: 1
-    maxItems: 3
     description: |
       Memory bus areas for interacting with the devices. Reflects
       the memory layout with four integer values following:
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
index e5f1a33332a5..dd5a64969e37 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
@@ -84,7 +84,6 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 3
     items:
       - description: NAND CTLRDY interrupt
       - description: FLASH_DMA_DONE if flash DMA is available
@@ -92,7 +91,6 @@ properties:
 
   interrupt-names:
     minItems: 1
-    maxItems: 3
     items:
       - const: nand_ctlrdy
       - const: flash_dma_done
@@ -148,8 +146,6 @@ allOf:
     then:
       properties:
         reg-names:
-          minItems: 2
-          maxItems: 2
           items:
             - const: nand
             - const: nand-int-base
@@ -161,8 +157,6 @@ allOf:
     then:
       properties:
         reg-names:
-          minItems: 3
-          maxItems: 3
           items:
             - const: nand
             - const: nand-int-base
@@ -175,8 +169,6 @@ allOf:
     then:
       properties:
         reg-names:
-          minItems: 3
-          maxItems: 3
           items:
             - const: nand
             - const: iproc-idm
diff --git a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
index 657c13b62b67..056d42daae06 100644
--- a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
+++ b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
@@ -30,7 +30,6 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
     items:
       - description: PCLK clocks
       - description: EXTCLK clocks. Faraday calls it CLK1HZ and says the clock
diff --git a/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
index a88f99adfe8e..f238848ad094 100644
--- a/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
+++ b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
@@ -25,14 +25,12 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: Host controller interrupt
       - description: Device controller interrupt in isp1761
 
   interrupt-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: host
       - const: peripheral
-- 
2.27.0


             reply	other threads:[~2021-07-13 19:35 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-13 19:34 Rob Herring [this message]
2021-07-14  8:38 ` [PATCH] dt-bindings: More dropping redundant minItems/maxItems Laurent Pinchart
2021-07-14 12:44 ` Alexandre Belloni
2021-07-14 13:08 ` Greg Kroah-Hartman
2021-07-20 21:31 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210713193453.690290-1-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bigeasy@linutronix.de \
    --cc=computersforpeace@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=kdasu.kdev@gmail.com \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=naga.sureshkumar.relli@xilinx.com \
    --cc=richard@nod.at \
    --cc=sboyd@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).