From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.2 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,MAILING_LIST_MULTI,MENTIONS_GIT_HOSTING, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_SANE_2 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 786C0C07E9A for ; Wed, 14 Jul 2021 14:32:01 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5984061289 for ; Wed, 14 Jul 2021 14:32:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232128AbhGNOew (ORCPT ); Wed, 14 Jul 2021 10:34:52 -0400 Received: from mail.kernel.org ([198.145.29.99]:54224 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231994AbhGNOev (ORCPT ); Wed, 14 Jul 2021 10:34:51 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id 794F6611C0; Wed, 14 Jul 2021 14:31:57 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1626273120; bh=yOtNr7+suOgCN8lqCfrgSJAyiWcSVdSY6iRNrdbFZhk=; h=Date:From:To:Cc:Subject:In-Reply-To:References:From; b=CUy3JmLCk2IixwQv/YKxv0BOKrIP0Wng778B2qv0WWTi1D3mA4pwYuluzh1lT5sSH pUKvskeYOIZERqRWJ4F6TBvBz7GPpeJeRDTBiSLHmvu09MepIoWnlyu5zdfnHNaWZo jOHlJuG/JLPdGOSNyPSPU3s5SAIxvf+xEzmrCVHmVs4bh4pimol5Bi/q36n6KSmeKr FC+9YwtZ2RvfPaaVo/ekzvTcf5A8vKqP8ZIjegfPhq0vgOfQXdg7zoTGqVERwkf1to C/DHZQjLJw8xnjxNETTkpYJc2b8fRhIfRfAFRdfysueWqUmefn2K7e7akTXXzdqRpZ c/7Rh0WShWwhg== Date: Wed, 14 Jul 2021 16:31:54 +0200 From: Mauro Carvalho Chehab To: Rob Herring Cc: Bjorn Helgaas , Linuxarm , mauro.chehab@huawei.com, Manivannan Sadhasivam , Kishon Vijay Abraham I , Vinod Koul , devicetree@vger.kernel.org, "linux-kernel@vger.kernel.org" , linux-phy@lists.infradead.org Subject: Re: [PATCH v5 2/8] dt-bindings: phy: Add bindings for HiKey 970 PCIe PHY Message-ID: <20210714163154.02e7d5b9@coco.lan> In-Reply-To: References: <20210714022649.GA1324196@robh.at.kernel.org> <20210714091435.322d68b1@coco.lan> X-Mailer: Claws Mail 3.17.8 (GTK+ 2.24.33; x86_64-redhat-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Em Wed, 14 Jul 2021 08:17:05 -0600 Rob Herring escreveu: > On Wed, Jul 14, 2021 at 1:14 AM Mauro Carvalho Chehab > wrote: > > > > Em Tue, 13 Jul 2021 20:26:49 -0600 > > Rob Herring escreveu: > > > > > On Tue, Jul 13, 2021 at 08:28:35AM +0200, Mauro Carvalho Chehab wrote: > > > > > > + reset-gpios: > > > > + description: PCI PERST reset GPIOs > > > > + maxItems: 4 > > > > > > Hiding the 4 ports in the phy? > > > > Rob, > > > > I'm not trying to hide anything. > > > > There are several differences with regards to how PERST# is handled between > > HiKey 960 and HiKey 970. > > > > From hardware perspective, you can see the schematics of both boards: > > > > https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_SoC_Reference_Manual.pdf > > https://www.96boards.org/documentation/consumer/hikey/hikey970/hardware-docs/files/hikey970-schematics.pdf > > > > The 960 PHY has the SoC directly connected to a PCIE M.2 slot > > (model 10130616) without any external bridge chipset. It uses a single > > GPIO (GPIO 089) for the PERST# signal, connected via a voltage converter > > (from 1.8V to 3.3V). > > > > $ lspci > > 00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01) > > > > The 970 PHY has an external PCI bridge chipset (PLX Technology PEX 8606). > > Besides the bridge, the hardware comes with an Ethernet PCI adapter, a > > M.2 slot and a mini-PCIe connector. Each one with its own PERST# signal, > > mapped to different GPIO pins, and each one using its own voltage > > converter. > > > > $ lspci > > 00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01) > > 01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) > > 02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) > > 02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) > > 02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) > > 02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) > > 02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) > > 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) > > > > On other words, there are 4 GPIOs mapped to different PERST# pins in > > the hardware: > > > > - GPIO 56 is connected to the PERST# pin at PEX 8606; > > - GPIO 25 is connected to the PERST# pin at the M.2 slot; > > - GPIO 220 is connected to the PERST# pin at the PCIe mini slot; > > - GPIO 203 is connected to the PERST# pin at the Ethernet chipset. > > > > Maybe due to different electrical requirements, the hardware design > > use different GPIOs instead of feeding them altogether. > > > > Anyway, the fact is that the PHY on 970 has 4 different GPIOs that are > > need in order for the hardware to work. and this is specific to this > > particular PHY. > > This hierarchy could be done on any board. It has nothing to do with the PHY. True, but right now, the pci-bus.yaml prevents it, as it allows just one reset GPIO[1]: reset-gpios: description: GPIO controlled connection to PERST# signal maxItems: 1 [1] https://github.com/robherring/dt-schema/blob/master/schemas/pci/pci-bus.yaml If the schema will be changed to allow multiple reset-gpios, It should be possible to keep this at the pcie-kirin.c driver with something like: static int kirin_pcie_power_on(struct kirin_pcie *kirin_pcie) { int ret; ret = phy_init(kirin_pcie->phy); if (ret) return ret; ret = phy_power_on(kirin_pcie->phy); /* perst assert Endpoints */ usleep_range(21000, 23000); for (i = 0; i < phy->n_gpio_resets; i++) { ret = gpio_direction_output(phy->gpio_id_reset[i], 1); if (ret) { phy_power_off(kirin_pcie->phy); return ret; } } usleep_range(10000, 11000); return phy_reset(kirin_pcie->phy); } This would work for both 960 - where phy_reset() is not needed, and for 970, where it would set the eye diagram for the PHY. Should I send a patch for pci-bus.yaml via github? Thanks, Mauro