[PATCH 1/2] ARM: dts: am437x-l4: fix typo in can@0 node

[PATCH 1/2] ARM: dts: am437x-l4: fix typo in can@0 node

[Dario Binacchi]

Replace clock-name with clock-names.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
---

 arch/arm/boot/dts/am437x-l4.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 40ef3973f2a9..ba58e6b0da1d 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1595,7 +1595,7 @@
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
 				clocks = <&dcan1_fck>;
-				clock-name = "fck";
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
-- 
2.17.1

[PATCH 2/2] dt-bindings: net: can: c_can: convert to json-schema

[Dario Binacchi]

Convert the Bosch C_CAN/D_CAN controller device tree binding
documentation to json-schema.

Document missing properties.
Remove "ti,hwmods" as it is no longer used in TI dts.
Make "clocks" required as it is used in all dts.
Correct nodename in the example.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
---

 .../bindings/net/can/bosch,c_can.yaml         | 85 +++++++++++++++++++
 .../devicetree/bindings/net/can/c_can.txt     | 65 --------------
 2 files changed, 85 insertions(+), 65 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/can/c_can.txt

diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
new file mode 100644
index 000000000000..f3a0a53eb5af
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch C_CAN/D_CAN controller Device Tree Bindings
+
+description: Bosch C_CAN/D_CAN controller for CAN bus
+
+maintainers:
+  - Dario Binacchi <dariobin@libero.it>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - bosch,c_can
+          - bosch,d_can
+          - ti,dra7-d_can
+          - ti,am3352-d_can
+      - items:
+          - enum:
+              - ti,am4372-d_can
+          - const: ti,am3352-d_can
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: |
+      Should contain a phandle to a PM domain provider node and an args
+      specifier containing the DCAN device id value. It's mandatory for
+      Keystone 2 66AK2G SoCs only.
+      See, Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt.
+    maxItems: 1
+
+  clocks:
+    description: |
+      CAN functional clock phandle.
+      See, Documentation/devicetree/bindings/clock/ti,sci-clk.txt.
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  syscon-raminit:
+    description: |
+      Handle to system control region that contains the RAMINIT register,
+      register offset to the RAMINIT register and the CAN instance number (0
+      offset).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    can@481d0000 {
+        compatible = "bosch,d_can";
+        reg = <0x481d0000 0x2000>;
+        interrupts = <55>;
+        interrupt-parent = <&intc>;
+        status = "disabled";
+    };
+  - |
+    can@0 {
+        compatible = "ti,am3352-d_can";
+        reg = <0x0 0x2000>;
+        clocks = <&dcan1_fck>;
+        clock-names = "fck";
+        syscon-raminit = <&scm_conf 0x644 1>;
+        interrupts = <55>;
+        status = "disabled";
+    };
diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
deleted file mode 100644
index 366479806acb..000000000000
--- a/Documentation/devicetree/bindings/net/can/c_can.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Bosch C_CAN/D_CAN controller Device Tree Bindings
--------------------------------------------------
-
-Required properties:
-- compatible		: Should be "bosch,c_can" for C_CAN controllers and
-			  "bosch,d_can" for D_CAN controllers.
-			  Can be "ti,dra7-d_can", "ti,am3352-d_can" or
-			  "ti,am4372-d_can".
-- reg			: physical base address and size of the C_CAN/D_CAN
-			  registers map
-- interrupts		: property with a value describing the interrupt
-			  number
-
-The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only:
-- ti,hwmods		: Must be "d_can<n>" or "c_can<n>", n being the
-			  instance number
-
-The following are mandatory properties for Keystone 2 66AK2G SoCs only:
-- power-domains		: Should contain a phandle to a PM domain provider node
-			  and an args specifier containing the DCAN device id
-			  value. This property is as per the binding,
-			  Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
-- clocks		: CAN functional clock phandle. This property is as per the
-			  binding,
-			  Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
-
-Optional properties:
-- syscon-raminit	: Handle to system control region that contains the
-			  RAMINIT register, register offset to the RAMINIT
-			  register and the CAN instance number (0 offset).
-
-Note: "ti,hwmods" field is used to fetch the base address and irq
-resources from TI, omap hwmod data base during device registration.
-Future plan is to migrate hwmod data base contents into device tree
-blob so that, all the required data will be used from device tree dts
-file.
-
-Example:
-
-Step1: SoC common .dtsi file
-
-	dcan1: d_can@481d0000 {
-		compatible = "bosch,d_can";
-		reg = <0x481d0000 0x2000>;
-		interrupts = <55>;
-		interrupt-parent = <&intc>;
-		status = "disabled";
-	};
-
-(or)
-
-	dcan1: d_can@481d0000 {
-		compatible = "bosch,d_can";
-		ti,hwmods = "d_can1";
-		reg = <0x481d0000 0x2000>;
-		interrupts = <55>;
-		interrupt-parent = <&intc>;
-		status = "disabled";
-	};
-
-Step 2: board specific .dts file
-
-	&dcan1 {
-		status = "okay";
-	};
-- 
2.17.1

Re: [PATCH 2/2] dt-bindings: net: can: c_can: convert to json-schema

[Rob Herring]

On Sun, 25 Jul 2021 18:03:18 +0200, Dario Binacchi wrote:
> Convert the Bosch C_CAN/D_CAN controller device tree binding
> documentation to json-schema.
> 
> Document missing properties.
> Remove "ti,hwmods" as it is no longer used in TI dts.
> Make "clocks" required as it is used in all dts.
> Correct nodename in the example.
> 
> Signed-off-by: Dario Binacchi <dariobin@libero.it>
> ---
> 
>  .../bindings/net/can/bosch,c_can.yaml         | 85 +++++++++++++++++++
>  .../devicetree/bindings/net/can/c_can.txt     | 65 --------------
>  2 files changed, 85 insertions(+), 65 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/can/c_can.txt
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:

\ndoc reference errors (make refcheckdocs):
Documentation/devicetree/bindings/net/can/bosch,c_can.yaml: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
Documentation/devicetree/bindings/net/can/bosch,c_can.yaml: Documentation/devicetree/bindings/clock/ti,sci-clk.txt

See https://patchwork.ozlabs.org/patch/1509610

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.