From: Konrad Dybcio <konrad.dybcio@somainline.org>
To: ~postmarketos/upstreaming@lists.sr.ht
Cc: martin.botka@somainline.org,
angelogioacchino.delregno@somainline.org,
marijn.suijten@somainline.org, jamipkettunen@somainline.org,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 14/16] arm64: dts: qcom: sm8350-sagami: Enable and populate I2C/SPI nodes
Date: Sun, 14 Nov 2021 02:27:53 +0100 [thread overview]
Message-ID: <20211114012755.112226-14-konrad.dybcio@somainline.org> (raw)
In-Reply-To: <20211114012755.112226-1-konrad.dybcio@somainline.org>
Based on current driver availability, add either nodes or comments regarding
peripherals connected via I2C/SPI.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
.../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 101 ++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index b50f04ffee95..c44376aa0742 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -75,6 +75,93 @@ ramoops@ffc00000 {
};
};
+&i2c1 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* Some subset of SONY IMX663 camera sensor @ 38 */
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
+};
+
+&i2c11 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ cs35l41_l: cs35l41@40 {
+ compatible = "cirrus,cs35l41";
+ reg = <0x40>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ cirrus,boost-peak-milliamp = <4000>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
+ cirrus,asp-sdout-hiz = <3>;
+ cirrus,gpio2-src-select = <2>;
+ cirrus,gpio2-output-enable;
+ #sound-dai-cells = <1>;
+ };
+
+ cs35l41_r: cs35l41@41 {
+ compatible = "cirrus,cs35l41";
+ reg = <0x41>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ cirrus,boost-peak-milliamp = <4000>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
+ cirrus,asp-sdout-hiz = <3>;
+ cirrus,gpio2-src-select = <2>;
+ cirrus,gpio2-output-enable;
+ #sound-dai-cells = <1>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+ clock-frequency = <100000>;
+
+ /* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+ status = "okay";
+ /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+ clock-frequency = <100000>;
+
+ /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
+ /* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c15 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c17 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
&pmk8350_rtc {
status = "okay";
};
@@ -100,8 +187,22 @@ &qupv3_id_2 {
status = "okay";
};
+&spi14 {
+ status = "okay";
+
+ /* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
&tlmm {
gpio-reserved-ranges = <44 4>;
+
+ ts_int_default: ts-int-default {
+ pin = "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
};
/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
--
2.33.1
next prev parent reply other threads:[~2021-11-14 1:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-14 1:27 [PATCH 01/16] arm64: dts: qcom: sm8350: Move gpio.h inclusion to SoC DTSI Konrad Dybcio
2021-11-14 1:27 ` [PATCH 02/16] arm64: dts: qcom: sm8350: Add missing QUPv3 ID2 Konrad Dybcio
2021-11-14 1:27 ` [PATCH 03/16] arm64: dts: qcom: sm8350: Add redistributor stride to GICv3 Konrad Dybcio
2021-11-14 1:27 ` [PATCH 04/16] arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer Konrad Dybcio
2021-11-30 2:05 ` Stephen Boyd
2021-11-30 19:59 ` Konrad Dybcio
2021-12-01 20:45 ` Stephen Boyd
2021-12-02 0:00 ` Konrad Dybcio
2021-12-02 0:17 ` Bjorn Andersson
2021-11-14 1:27 ` [PATCH 05/16] arm64: dts: qcom: sm[68]350: Use interrupts-extended with pdc interrupts Konrad Dybcio
2021-11-14 1:27 ` [PATCH 06/16] arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom name Konrad Dybcio
2021-11-14 1:27 ` [PATCH 07/16] arm64: dts: qcom: *8350* Consolidate PON/RESIN usage Konrad Dybcio
2021-11-14 1:27 ` [PATCH 08/16] arm64: dts: qcom: sm8350: Describe GCC dependency clocks Konrad Dybcio
2021-11-14 1:27 ` [PATCH 09/16] arm64: dts: qcom: sm8350: Set up WRAP0 QUPs Konrad Dybcio
2021-11-14 1:27 ` [PATCH 10/16] arm64: dts: qcom: sm8350: Set up WRAP1 QUPs Konrad Dybcio
2021-11-14 1:27 ` [PATCH 11/16] arm64: dts: qcom: sm8350: Set up WRAP2 QUPs Konrad Dybcio
2021-11-14 1:27 ` [PATCH 12/16] arm64: dts: qcom: sm8350: Assign iommus property to QUP WRAPs Konrad Dybcio
2021-11-14 1:27 ` [PATCH 13/16] arm64: dts: qcom: Add support for Xperia 1 III / 5 III Konrad Dybcio
2021-11-14 19:47 ` Trilok Soni
2021-11-15 10:26 ` Konrad Dybcio
2021-11-14 1:27 ` Konrad Dybcio [this message]
2021-11-14 1:27 ` [PATCH 15/16] arm64: dts: qcom: sm8350-sagami: Configure remote processors Konrad Dybcio
2021-11-14 1:27 ` [PATCH 16/16] arm64: dts: qcom: sm8350: Add LLCC node Konrad Dybcio
2021-11-20 23:55 ` [PATCH 01/16] arm64: dts: qcom: sm8350: Move gpio.h inclusion to SoC DTSI Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211114012755.112226-14-konrad.dybcio@somainline.org \
--to=konrad.dybcio@somainline.org \
--cc=agross@kernel.org \
--cc=angelogioacchino.delregno@somainline.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jamipkettunen@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=martin.botka@somainline.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).