From: Luca Ceresoli <luca@lucaceresoli.net>
To: linux-kernel@vger.kernel.org
Cc: Luca Ceresoli <luca@lucaceresoli.net>,
Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
devicetree@vger.kernel.org, linux-rtc@vger.kernel.org,
linux-watchdog@vger.kernel.org,
Chiwoong Byun <woong.byun@samsung.com>,
Laxman Dewangan <ldewangan@nvidia.com>,
Randy Dunlap <rdunlap@infradead.org>
Subject: [PATCH v4 9/9] rtc: max77686: add MAX77714 support
Date: Sat, 20 Nov 2021 16:57:07 +0100 [thread overview]
Message-ID: <20211120155707.4019487-10-luca@lucaceresoli.net> (raw)
In-Reply-To: <20211120155707.4019487-1-luca@lucaceresoli.net>
The RTC included in the MAX77714 PMIC is very similar to the one in the
MAX77686. Reuse the rtc-max77686.c driver with the minimum required changes
for the MAX77714 RTC.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
Changes in v4: none
Changes in v3: none
Changes in v2: none
---
drivers/rtc/Kconfig | 2 +-
drivers/rtc/rtc-max77686.c | 24 ++++++++++++++++++++++++
2 files changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 058e56a10ab8..4242cca5e560 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -375,7 +375,7 @@ config RTC_DRV_MAX8997
config RTC_DRV_MAX77686
tristate "Maxim MAX77686"
- depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
+ depends on MFD_MAX77686 || MFD_MAX77620 || MFD_MAX77714 || COMPILE_TEST
help
If you say yes here you will get support for the
RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC.
diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index 5c64d08c0732..b0250d91fb00 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -19,6 +19,7 @@
#define MAX77686_I2C_ADDR_RTC (0x0C >> 1)
#define MAX77620_I2C_ADDR_RTC 0x68
+#define MAX77714_I2C_ADDR_RTC 0x48
#define MAX77686_INVALID_I2C_ADDR (-1)
/* Define non existing register */
@@ -200,6 +201,28 @@ static const struct max77686_rtc_driver_data max77686_drv_data = {
.regmap_config = &max77686_rtc_regmap_config,
};
+static const struct regmap_irq_chip max77714_rtc_irq_chip = {
+ .name = "max77714-rtc",
+ .status_base = MAX77686_RTC_INT,
+ .mask_base = MAX77686_RTC_INTM,
+ .num_regs = 1,
+ .irqs = max77686_rtc_irqs,
+ .num_irqs = ARRAY_SIZE(max77686_rtc_irqs) - 1, /* no WTSR on 77714 */
+};
+
+static const struct max77686_rtc_driver_data max77714_drv_data = {
+ .delay = 16000,
+ .mask = 0x7f,
+ .map = max77686_map,
+ .alarm_enable_reg = false,
+ .rtc_irq_from_platform = false,
+ /* On MAX77714 RTCA1 is BIT 1 of RTCINT (0x00). Not supported by this driver. */
+ .alarm_pending_status_reg = MAX77686_INVALID_REG,
+ .rtc_i2c_addr = MAX77714_I2C_ADDR_RTC,
+ .rtc_irq_chip = &max77714_rtc_irq_chip,
+ .regmap_config = &max77686_rtc_regmap_config,
+};
+
static const struct regmap_config max77620_rtc_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -843,6 +866,7 @@ static const struct platform_device_id rtc_id[] = {
{ "max77686-rtc", .driver_data = (kernel_ulong_t)&max77686_drv_data, },
{ "max77802-rtc", .driver_data = (kernel_ulong_t)&max77802_drv_data, },
{ "max77620-rtc", .driver_data = (kernel_ulong_t)&max77620_drv_data, },
+ { "max77714-rtc", .driver_data = (kernel_ulong_t)&max77714_drv_data, },
{},
};
MODULE_DEVICE_TABLE(platform, rtc_id);
--
2.25.1
prev parent reply other threads:[~2021-11-20 16:01 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-20 15:56 [PATCH v4 0/9] Add MAX77714 PMIC minimal driver (RTC and watchdog only) Luca Ceresoli
2021-11-20 15:56 ` [PATCH v4 1/9] rtc: max77686: convert comments to kernel-doc format Luca Ceresoli
2021-11-20 15:57 ` [PATCH v4 2/9] rtc: max77686: rename day-of-month defines Luca Ceresoli
2021-11-20 15:57 ` [PATCH v4 3/9] rtc: max77686: remove unused code to read in 12-hour mode Luca Ceresoli
2021-11-20 15:57 ` [PATCH v4 4/9] dt-bindings: mfd: add Maxim MAX77714 PMIC Luca Ceresoli
2021-11-21 16:48 ` Krzysztof Kozlowski
2021-11-20 15:57 ` [PATCH v4 5/9] mfd: max77714: Add driver for " Luca Ceresoli
2021-11-21 17:20 ` Krzysztof Kozlowski
2021-11-20 15:57 ` [PATCH v4 6/9] watchdog: Kconfig: fix help text indentation Luca Ceresoli
2021-11-20 15:57 ` [PATCH v4 7/9] watchdog: max77620: add support for the max77714 variant Luca Ceresoli
2021-11-29 15:53 ` Guenter Roeck
2021-11-29 21:24 ` Luca Ceresoli
2021-11-29 21:56 ` Guenter Roeck
2021-11-29 22:14 ` Luca Ceresoli
2021-11-20 15:57 ` [PATCH v4 8/9] watchdog: max77620: add comment to clarify set_timeout procedure Luca Ceresoli
2021-11-29 16:04 ` Guenter Roeck
2021-11-29 16:08 ` Luca Ceresoli
2021-11-29 16:18 ` Guenter Roeck
2021-11-20 15:57 ` Luca Ceresoli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211120155707.4019487-10-luca@lucaceresoli.net \
--to=luca@lucaceresoli.net \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=ldewangan@nvidia.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=wim@linux-watchdog.org \
--cc=woong.byun@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).