From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] arm64: dts: meson: p241: add sound support
Date: Tue, 30 Nov 2021 11:01:59 +0100 [thread overview]
Message-ID: <20211130100159.214489-3-jbrunet@baylibre.com> (raw)
In-Reply-To: <20211130100159.214489-1-jbrunet@baylibre.com>
Add the p241 sound card support. This board can play audio through HDMI
and the internal DAC.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../boot/dts/amlogic/meson-gxl-s805x-p241.dts | 70 +++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
index 9d0684a8264b..ff906becd2ab 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
#include "meson-gxl-s805x.dtsi"
@@ -21,6 +22,13 @@ aliases {
ethernet0 = ðmac;
};
+ au2: analog-amplifier {
+ compatible = "simple-audio-amplifier";
+ sound-name-prefix = "AU2";
+ VCC-supply = <&vcc_5v>;
+ enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -110,6 +118,68 @@ sdio_pwrseq: sdio-pwrseq {
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ sound {
+ compatible = "amlogic,gx-sound-card";
+ model = "GXL-P241";
+ audio-aux-devs = <&au2>;
+ audio-widgets = "Line", "Lineout";
+ audio-routing = "AU2 INL", "ACODEC LOLN",
+ "AU2 INR", "ACODEC LORN",
+ "Lineout", "AU2 OUTL",
+ "Lineout", "AU2 OUTR";
+ assigned-clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+ dai-format = "i2s";
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+ };
+
+ codec-1 {
+ sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+ };
+ };
+
+ dai-link-2 {
+ sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+
+ dai-link-3 {
+ sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&acodec>;
+ };
+ };
+ };
+};
+
+&acodec {
+ AVDD-supply = <&vddio_ao18>;
+ status = "okay";
+};
+
+&aiu {
+ status = "okay";
};
&cec_AO {
--
2.34.0
next prev parent reply other threads:[~2021-11-30 10:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-30 10:01 [PATCH 0/2] arm64: dts: meson: p241: add internal sound support Jerome Brunet
2021-11-30 10:01 ` [PATCH 1/2] arm64: dts: meson: p241: add vcc_5v regulator Jerome Brunet
2021-11-30 10:40 ` Neil Armstrong
2021-11-30 10:01 ` Jerome Brunet [this message]
2021-11-30 10:41 ` [PATCH 2/2] arm64: dts: meson: p241: add sound support Neil Armstrong
2021-11-30 10:43 ` [PATCH 0/2] arm64: dts: meson: p241: add internal " Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211130100159.214489-3-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).