From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 02940C433F5 for ; Tue, 11 Jan 2022 16:50:39 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241255AbiAKQug (ORCPT ); Tue, 11 Jan 2022 11:50:36 -0500 Received: from relay3-d.mail.gandi.net ([217.70.183.195]:54879 "EHLO relay3-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241242AbiAKQuf (ORCPT ); Tue, 11 Jan 2022 11:50:35 -0500 Received: (Authenticated sender: jacopo@jmondi.org) by relay3-d.mail.gandi.net (Postfix) with ESMTPSA id 1837960009; Tue, 11 Jan 2022 16:50:31 +0000 (UTC) Date: Tue, 11 Jan 2022 17:51:32 +0100 From: Jacopo Mondi To: Eugen.Hristev@microchip.com Cc: linux-media@vger.kernel.org, robh+dt@kernel.org, laurent.pinchart@ideasonboard.com, sakari.ailus@iki.fi, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Nicolas.Ferre@microchip.com Subject: Re: [PATCH v3 12/23] media: atmel: atmel-isc: implement media controller Message-ID: <20220111165132.g62ykrjjk3jh4eyd@uno.localdomain> References: <20211213134940.324266-1-eugen.hristev@microchip.com> <20211213134940.324266-13-eugen.hristev@microchip.com> <20220111160603.qi4kbp6rn45hp7po@uno.localdomain> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org On Tue, Jan 11, 2022 at 04:30:15PM +0000, Eugen.Hristev@microchip.com wrote: > On 1/11/22 6:06 PM, Jacopo Mondi wrote: > > Hi Eugen, > > > > On Mon, Dec 13, 2021 at 03:49:29PM +0200, Eugen Hristev wrote: > >> Implement the support for media-controller. > >> This means that the capabilities of the driver have changed and now > >> it also advertises the IO_MC . > >> The driver will register it's media device, and add the video entity to this > >> media device. The subdevices are registered to the same media device. > >> The ISC will have a base entity which is auto-detected as atmel_isc_base. > >> It will also register a subdevice that allows cropping of the incoming frame > >> to the maximum frame size supported by the ISC. > >> The ISC will create a link between the subdevice that is asynchronously > >> registered and the atmel_isc_scaler entity. > >> Then, the atmel_isc_scaler and atmel_isc_base are connected through another > >> link. > >> > >> Signed-off-by: Eugen Hristev > >> --- > >> Changes in v2: > >> - implement try formats > >> > >> drivers/media/platform/atmel/Makefile | 2 +- > >> drivers/media/platform/atmel/atmel-isc-base.c | 27 +- > >> drivers/media/platform/atmel/atmel-isc-mc.c | 287 ++++++++++++++++++ > >> drivers/media/platform/atmel/atmel-isc.h | 36 +++ > >> .../media/platform/atmel/atmel-sama5d2-isc.c | 14 +- > >> .../media/platform/atmel/atmel-sama7g5-isc.c | 12 +- > >> 6 files changed, 370 insertions(+), 8 deletions(-) > >> create mode 100644 drivers/media/platform/atmel/atmel-isc-mc.c > >> > >> diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile > >> index 794e8f739287..aa7a18b428f6 100644 > >> --- a/drivers/media/platform/atmel/Makefile > >> +++ b/drivers/media/platform/atmel/Makefile > >> @@ -1,7 +1,7 @@ > >> # SPDX-License-Identifier: GPL-2.0-only > >> atmel-isc-objs = atmel-sama5d2-isc.o > >> atmel-xisc-objs = atmel-sama7g5-isc.o > >> -atmel-isc-common-objs = atmel-isc-base.o atmel-isc-clk.o > >> +atmel-isc-common-objs = atmel-isc-base.o atmel-isc-clk.o atmel-isc-mc.o > >> > >> obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o > >> obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-common.o > >> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c > >> index d0542b97a391..b0c3ed21f372 100644 > >> --- a/drivers/media/platform/atmel/atmel-isc-base.c > >> +++ b/drivers/media/platform/atmel/atmel-isc-base.c > >> @@ -1726,6 +1726,7 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier, > >> struct isc_device, v4l2_dev); > >> struct isc_subdev_entity *subdev_entity = > >> container_of(notifier, struct isc_subdev_entity, notifier); > >> + int pad; > >> > >> if (video_is_registered(&isc->video_dev)) { > >> v4l2_err(&isc->v4l2_dev, "only supports one sub-device.\n"); > >> @@ -1734,6 +1735,16 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier, > >> > >> subdev_entity->sd = subdev; > >> > >> + pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode, > >> + MEDIA_PAD_FL_SOURCE); > >> + if (pad < 0) { > >> + v4l2_err(&isc->v4l2_dev, "failed to find pad for %s\n", > >> + subdev->name); > >> + return pad; > >> + } > >> + > >> + isc->remote_pad = pad; > >> + > >> return 0; > >> } > >> > >> @@ -1748,8 +1759,8 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier, > >> v4l2_ctrl_handler_free(&isc->ctrls.handler); > >> } > >> > >> -static struct isc_format *find_format_by_code(struct isc_device *isc, > >> - unsigned int code, int *index) > >> +struct isc_format *isc_find_format_by_code(struct isc_device *isc, > >> + unsigned int code, int *index) > >> { > >> struct isc_format *fmt = &isc->formats_list[0]; > >> unsigned int i; > >> @@ -1765,6 +1776,7 @@ static struct isc_format *find_format_by_code(struct isc_device *isc, > >> > >> return NULL; > >> } > >> +EXPORT_SYMBOL_GPL(isc_find_format_by_code); > >> > >> static int isc_formats_init(struct isc_device *isc) > >> { > >> @@ -1781,7 +1793,7 @@ static int isc_formats_init(struct isc_device *isc) > >> NULL, &mbus_code)) { > >> mbus_code.index++; > >> > >> - fmt = find_format_by_code(isc, mbus_code.code, &i); > >> + fmt = isc_find_format_by_code(isc, mbus_code.code, &i); > >> if (!fmt) { > >> v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n", > >> mbus_code.code); > >> @@ -1909,7 +1921,8 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier) > >> vdev->queue = q; > >> vdev->lock = &isc->lock; > >> vdev->ctrl_handler = &isc->ctrls.handler; > >> - vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE; > >> + vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE | > >> + V4L2_CAP_IO_MC; > >> video_set_drvdata(vdev, isc); > >> > >> ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); > >> @@ -1919,8 +1932,14 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier) > >> goto isc_async_complete_err; > >> } > >> > >> + ret = isc_mc_register(isc); > >> + if (ret < 0) > >> + goto isc_async_complete_unregister_device; > >> return 0; > >> > >> +isc_async_complete_unregister_device: > >> + video_unregister_device(vdev); > >> + > >> isc_async_complete_err: > >> mutex_destroy(&isc->lock); > >> return ret; > >> diff --git a/drivers/media/platform/atmel/atmel-isc-mc.c b/drivers/media/platform/atmel/atmel-isc-mc.c > >> new file mode 100644 > >> index 000000000000..2aea81d77b2f > >> --- /dev/null > >> +++ b/drivers/media/platform/atmel/atmel-isc-mc.c > >> @@ -0,0 +1,287 @@ > >> +// SPDX-License-Identifier: GPL-2.0-only > >> +/* > >> + * Microchip Image Sensor Controller (ISC) Media Controller support > >> + * > >> + * Copyright (C) 2021 Microchip Technology, Inc. > >> + * > >> + * Author: Eugen Hristev > >> + * > >> + */ > >> + > >> +#include > >> +#include > > > > Should you include and ? > > Hi Jacopo, > > They are probably being included from another header. I will add them. > Thank you :) > > > > Also, should you select MEDIA_CONTROLLER and V4L2_SUBDEV_API for all > > the Kconfig symbols ? > > > VIDEO_ATMEL_ISC directly selects: > select MEDIA_CONTROLLER > select VIDEO_V4L2_SUBDEV_API > > and VIDEO_ATMEL_XISC > depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API And selects VIDEO_ATMEL_ISC_BASE so it's fine! VIDEO_ATMEL_ISI does not. I'm fine if this is intended, I might have got lost in the several pieces this driver is composed of :) > > and VIDEO_V4L2_SUBDEV_API depends on MEDIA_CONTROLLER > > > > >> + > >> +#include "atmel-isc-regs.h" > >> +#include "atmel-isc.h" > >> + > >> +static const struct media_device_ops isc_media_ops = { > >> +}; > > > > Do you need this even if it's empty ? > > > > Not sure. I can remove it and pass NULL, but I haven't checked what the > subsystem is doing if there is no ops. I will try. > Seems like it is safe as the core checks for if (mdev->ops) before accessing it (except for mc-request for which operations are mandatory) > >> + > >> +static int isc_scaler_get_fmt(struct v4l2_subdev *sd, > >> + struct v4l2_subdev_state *sd_state, > >> + struct v4l2_subdev_format *format) > >> +{ > >> + struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd); > >> + struct v4l2_mbus_framefmt *v4l2_try_fmt; > >> + > >> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { > >> + v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state, > >> + format->pad); > >> + format->format = *v4l2_try_fmt; > >> + > >> + return 0; > >> + } > >> + > >> + format->format = isc->scaler_format; > >> + > >> + return 0; > >> +} > >> + > >> +static int isc_scaler_set_fmt(struct v4l2_subdev *sd, > >> + struct v4l2_subdev_state *sd_state, > >> + struct v4l2_subdev_format *req_fmt) > >> +{ > >> + struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd); > >> + struct v4l2_mbus_framefmt *v4l2_try_fmt; > >> + struct isc_format *fmt; > >> + unsigned int i; > >> + > >> + if (req_fmt->pad == ISC_SCALER_PAD_SOURCE) > >> + v4l_bound_align_image > >> + (&req_fmt->format.width, 16, isc->max_width, 0, > >> + &req_fmt->format.height, 16, isc->max_height, 0, 0); > >> + else > >> + v4l_bound_align_image > >> + (&req_fmt->format.width, 16, 10000, 0, > >> + &req_fmt->format.height, 16, 10000, 0, 0); > >> + > >> + req_fmt->format.colorspace = V4L2_COLORSPACE_SRGB; > >> + req_fmt->format.field = V4L2_FIELD_NONE; > >> + req_fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > >> + req_fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT; > >> + req_fmt->format.xfer_func = V4L2_XFER_FUNC_DEFAULT; > >> + > >> + fmt = isc_find_format_by_code(isc, req_fmt->format.code, &i); > >> + > >> + if (!fmt) > >> + fmt = &isc->formats_list[0]; > >> + > >> + req_fmt->format.code = fmt->mbus_code; > >> + > >> + if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > >> + v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state, > >> + req_fmt->pad); > >> + *v4l2_try_fmt = req_fmt->format; > >> + /* Trying on the pad sink makes the source sink change too */ > >> + if (req_fmt->pad == ISC_SCALER_PAD_SINK) { > >> + v4l2_try_fmt = > >> + v4l2_subdev_get_try_format(sd, sd_state, > >> + ISC_SCALER_PAD_SOURCE); > >> + *v4l2_try_fmt = req_fmt->format; > >> + > >> + v4l_bound_align_image(&v4l2_try_fmt->width, > >> + 16, isc->max_width, 0, > >> + &v4l2_try_fmt->height, > >> + 16, isc->max_height, 0, 0); > >> + } > >> + /* if we are just trying, we are done */ > >> + return 0; > >> + } > >> + > >> + isc->scaler_format = req_fmt->format; > >> + > >> + return 0; > >> +} > >> + > >> +static int isc_scaler_enum_mbus_code(struct v4l2_subdev *sd, > >> + struct v4l2_subdev_state *sd_state, > >> + struct v4l2_subdev_mbus_code_enum *code) > >> +{ > >> + struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd); > >> + int supported_index = 0; > >> + int i; > >> + > >> + for (i = 0; i < isc->formats_list_size; i++) { > >> + if (!isc->formats_list[i].sd_support) > >> + continue; > >> + if (supported_index == code->index) { > >> + code->code = isc->formats_list[i].mbus_code; > >> + return 0; > >> + } > >> + supported_index++; > >> + } > >> + > >> + return -EINVAL; > >> +} > >> + > >> +static int isc_scaler_g_sel(struct v4l2_subdev *sd, > >> + struct v4l2_subdev_state *sd_state, > >> + struct v4l2_subdev_selection *sel) > >> +{ > >> + struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd); > >> + > >> + if (sel->pad == ISC_SCALER_PAD_SOURCE) > >> + return -EINVAL; > >> + > >> + if (sel->target != V4L2_SEL_TGT_CROP_BOUNDS && > >> + sel->target != V4L2_SEL_TGT_CROP) > >> + return -EINVAL; > >> + > >> + sel->r.height = isc->max_height; > >> + sel->r.width = isc->max_width; > >> + > >> + sel->r.left = 0; > >> + sel->r.top = 0; > >> + > >> + return 0; > >> +} > >> + > >> +static int isc_scaler_init_cfg(struct v4l2_subdev *sd, > >> + struct v4l2_subdev_state *sd_state) > >> +{ > >> + struct v4l2_mbus_framefmt *v4l2_try_fmt = > >> + v4l2_subdev_get_try_format(sd, sd_state, 0); > >> + struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd); > >> + > >> + *v4l2_try_fmt = isc->scaler_format; > >> + > >> + return 0; > >> +} > >> + > >> +static const struct v4l2_subdev_pad_ops isc_scaler_pad_ops = { > >> + .enum_mbus_code = isc_scaler_enum_mbus_code, > >> + .set_fmt = isc_scaler_set_fmt, > >> + .get_fmt = isc_scaler_get_fmt, > >> + .get_selection = isc_scaler_g_sel, > >> + .init_cfg = isc_scaler_init_cfg, > >> +}; > >> + > >> +static const struct v4l2_subdev_ops xisc_scaler_subdev_ops = { > >> + .pad = &isc_scaler_pad_ops, > >> +}; > >> + > >> +static int isc_init_own_sd(struct isc_device *isc) > >> +{ > >> + int ret; > >> + > >> + v4l2_subdev_init(&isc->scaler_sd, &xisc_scaler_subdev_ops); > >> + > >> + isc->scaler_sd.owner = THIS_MODULE; > >> + isc->scaler_sd.dev = isc->dev; > >> + snprintf(isc->scaler_sd.name, sizeof(isc->scaler_sd.name), > >> + "atmel_isc_scaler"); > >> + > >> + isc->scaler_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > >> + isc->scaler_sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER; > >> + isc->scaler_pads[ISC_SCALER_PAD_SINK].flags = MEDIA_PAD_FL_SINK; > >> + isc->scaler_pads[ISC_SCALER_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; > >> + > >> + isc->scaler_format.height = isc->max_height; > >> + isc->scaler_format.width = isc->max_width; > >> + isc->scaler_format.code = isc->formats_list[0].mbus_code; > >> + isc->scaler_format.colorspace = V4L2_COLORSPACE_SRGB; > >> + isc->scaler_format.field = V4L2_FIELD_NONE; > >> + isc->scaler_format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > >> + isc->scaler_format.quantization = V4L2_QUANTIZATION_DEFAULT; > >> + isc->scaler_format.xfer_func = V4L2_XFER_FUNC_DEFAULT; > >> + > >> + ret = media_entity_pads_init(&isc->scaler_sd.entity, > >> + ISC_SCALER_PADS_NUM, > >> + isc->scaler_pads); > >> + if (ret < 0) { > >> + dev_err(isc->dev, "scaler sd media entity init failed\n"); > >> + return ret; > >> + } > >> + ret = v4l2_device_register_subdev(&isc->v4l2_dev, &isc->scaler_sd); > >> + if (ret < 0) { > >> + dev_err(isc->dev, "scaler sd failed to register subdev\n"); > >> + return ret; > >> + } > >> + > >> + return ret; > >> +} > >> + > >> +int isc_mc_init(struct isc_device *isc, u32 ver) > >> +{ > >> + const struct of_device_id *match; > >> + int ret; > >> + > >> + isc->video_dev.entity.function = MEDIA_ENT_F_IO_V4L; > >> + isc->video_dev.entity.flags = MEDIA_ENT_FL_DEFAULT; > >> + isc->pads[ISC_PAD_SINK].flags = MEDIA_PAD_FL_SINK; > >> + > >> + ret = media_entity_pads_init(&isc->video_dev.entity, ISC_PADS_NUM, > >> + isc->pads); > >> + if (ret < 0) { > >> + dev_err(isc->dev, "media entity init failed\n"); > >> + return ret; > >> + } > >> + > >> + isc->mdev.dev = isc->dev; > >> + isc->mdev.ops = &isc_media_ops; > >> + > >> + match = of_match_node(isc->dev->driver->of_match_table, > >> + isc->dev->of_node); > >> + > >> + strscpy(isc->mdev.driver_name, KBUILD_MODNAME, > >> + sizeof(isc->mdev.driver_name)); > >> + strscpy(isc->mdev.model, match->compatible, sizeof(isc->mdev.model)); > >> + snprintf(isc->mdev.bus_info, sizeof(isc->mdev.bus_info), "platform:%s", > >> + isc->v4l2_dev.name); > >> + isc->mdev.hw_revision = ver; > >> + > >> + media_device_init(&isc->mdev); > >> + > >> + isc->v4l2_dev.mdev = &isc->mdev; > >> + > >> + return isc_init_own_sd(isc); > >> +} > >> +EXPORT_SYMBOL_GPL(isc_mc_init); > >> + > >> +int isc_mc_register(struct isc_device *isc) > >> +{ > >> + int ret; > >> + > >> + ret = media_create_pad_link(&isc->current_subdev->sd->entity, > >> + isc->remote_pad, &isc->scaler_sd.entity, > >> + ISC_SCALER_PAD_SINK, > >> + MEDIA_LNK_FL_ENABLED | > >> + MEDIA_LNK_FL_IMMUTABLE); > >> + > >> + if (ret < 0) { > >> + v4l2_err(&isc->v4l2_dev, > >> + "Failed to create pad link: %s to %s\n", > >> + isc->current_subdev->sd->entity.name, > >> + isc->scaler_sd.entity.name); > >> + return ret; > >> + } > >> + > >> + dev_dbg(isc->dev, "link with %s pad: %d\n", > >> + isc->current_subdev->sd->name, isc->remote_pad); > >> + > >> + ret = media_create_pad_link(&isc->scaler_sd.entity, > >> + ISC_SCALER_PAD_SOURCE, > >> + &isc->video_dev.entity, ISC_PAD_SINK, > >> + MEDIA_LNK_FL_ENABLED | > >> + MEDIA_LNK_FL_IMMUTABLE); > >> + > >> + if (ret < 0) { > >> + v4l2_err(&isc->v4l2_dev, > >> + "Failed to create pad link: %s to %s\n", > >> + isc->scaler_sd.entity.name, > >> + isc->video_dev.entity.name); > >> + return ret; > >> + } > >> + > >> + dev_dbg(isc->dev, "link with %s pad: %d\n", isc->scaler_sd.name, > >> + ISC_SCALER_PAD_SOURCE); > >> + > >> + return media_device_register(&isc->mdev); > > > > I feel like the isc-base driver shold instead register the > > media-controller and this file shuld actually be only about > > isc-scaler or something. I might be missing why it is not possible > > though. It doesn't seem to me that mc support is conditional, so it > > can happen in the base driver directly ? > > This actually is the base driver. Just that the atmel-isc-base.c is > pretty crowded. So I moved the MC part in this file. But it's the same > base driver. > I understand. isc-base is pretty big, you're right. However breaking mc apart in a file that mixes registering an entity for the scaler and initializing mc for the whole driver feels weird, at least to me, as I don't immediately get why the mc part is handled by the scaler file... > > > > Links creation can still happen at async_complete() (I would have > > suggested _bound() time, but you have no asyn subdev for the scaler, > > so I guess the only async subdev here is the sensor). > > Yes, the sensor or any kind of subdevice (XISC normally is connected to > a bridge, ISC to a sensor directly ) > > > > > All in all: can this function be removed and: > > 1) Base driver registers the media controller device in probe > > Should we register the media device even if it's not operational ? and > no video device has been registered ? > I thought it would be safer to have it registered with all the > links/entities/etc once the video node has been completed. > > But if you say this is the proper way, I can do that. > I wanted to keep things separated and not overcrowd the base file /probe > function, but if it's just a media_device_register call, I can do it there. You are right. Calling media_device_register() at async_complete time is the right thing to do. Thanks j > > > 2) links are created at async_complete time ? > > That works too. I think I could move them there. > > Thanks for reviewing, > > Eugen > > > > > Thanks > > j > > > > > >> +} > >> +EXPORT_SYMBOL_GPL(isc_mc_register); > >> + > >> +void isc_mc_cleanup(struct isc_device *isc) > >> +{ > >> + media_entity_cleanup(&isc->video_dev.entity); > >> +} > >> +EXPORT_SYMBOL_GPL(isc_mc_cleanup); > >> diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h > >> index 07fa6dbf8460..0b6370d7775f 100644 > >> --- a/drivers/media/platform/atmel/atmel-isc.h > >> +++ b/drivers/media/platform/atmel/atmel-isc.h > >> @@ -183,6 +183,17 @@ struct isc_reg_offsets { > >> u32 his_entry; > >> }; > >> > >> +enum isc_mc_pads { > >> + ISC_PAD_SINK = 0, > >> + ISC_PADS_NUM = 1, > >> +}; > >> + > >> +enum isc_scaler_pads { > >> + ISC_SCALER_PAD_SINK = 0, > >> + ISC_SCALER_PAD_SOURCE = 1, > >> + ISC_SCALER_PADS_NUM = 2, > >> +}; > >> + > >> /* > >> * struct isc_device - ISC device driver data/config struct > >> * @regmap: Register map > >> @@ -258,6 +269,12 @@ struct isc_reg_offsets { > >> * be used as an input to the controller > >> * @controller_formats_size: size of controller_formats array > >> * @formats_list_size: size of formats_list array > >> + * @pads: media controller pads for isc video entity > >> + * @mdev: media device that is registered by the isc > >> + * @remote_pad: remote pad on the connected subdevice > >> + * @scaler_sd: subdevice for the scaler that isc registers > >> + * @scaler_pads: media controller pads for the scaler subdevice > >> + * @scaler_format: current format for the scaler subdevice > >> */ > >> struct isc_device { > >> struct regmap *regmap; > >> @@ -346,6 +363,19 @@ struct isc_device { > >> struct isc_format *formats_list; > >> u32 controller_formats_size; > >> u32 formats_list_size; > >> + > >> + struct { > >> + struct media_pad pads[ISC_PADS_NUM]; > >> + struct media_device mdev; > >> + > >> + u32 remote_pad; > >> + }; > >> + > >> + struct { > >> + struct v4l2_subdev scaler_sd; > >> + struct media_pad scaler_pads[ISC_SCALER_PADS_NUM]; > >> + struct v4l2_mbus_framefmt scaler_format; > >> + }; > >> }; > >> > >> extern const struct regmap_config isc_regmap_config; > >> @@ -357,4 +387,10 @@ int isc_clk_init(struct isc_device *isc); > >> void isc_subdev_cleanup(struct isc_device *isc); > >> void isc_clk_cleanup(struct isc_device *isc); > >> > >> +int isc_mc_init(struct isc_device *isc, u32 ver); > >> +int isc_mc_register(struct isc_device *isc); > >> +void isc_mc_cleanup(struct isc_device *isc); > >> + > >> +struct isc_format *isc_find_format_by_code(struct isc_device *isc, > >> + unsigned int code, int *index); > >> #endif > >> diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c > >> index 1b2063cce0f7..a3e4c32a66c4 100644 > >> --- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c > >> +++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c > >> @@ -529,6 +529,12 @@ static int atmel_isc_probe(struct platform_device *pdev) > >> break; > >> } > >> > >> + regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver); > >> + > >> + ret = isc_mc_init(isc, ver); > >> + if (ret < 0) > >> + goto isc_probe_mc_init_err; > >> + > >> pm_runtime_set_active(dev); > >> pm_runtime_enable(dev); > >> pm_request_idle(dev); > >> @@ -538,7 +544,7 @@ static int atmel_isc_probe(struct platform_device *pdev) > >> ret = clk_prepare_enable(isc->ispck); > >> if (ret) { > >> dev_err(dev, "failed to enable ispck: %d\n", ret); > >> - goto cleanup_subdev; > >> + goto isc_probe_mc_init_err; > >> } > >> > >> /* ispck should be greater or equal to hclock */ > >> @@ -548,7 +554,6 @@ static int atmel_isc_probe(struct platform_device *pdev) > >> goto unprepare_clk; > >> } > >> > >> - regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver); > >> dev_info(dev, "Microchip ISC version %x\n", ver); > >> > >> return 0; > >> @@ -556,6 +561,9 @@ static int atmel_isc_probe(struct platform_device *pdev) > >> unprepare_clk: > >> clk_disable_unprepare(isc->ispck); > >> > >> +isc_probe_mc_init_err: > >> + isc_mc_cleanup(isc); > >> + > >> cleanup_subdev: > >> isc_subdev_cleanup(isc); > >> > >> @@ -576,6 +584,8 @@ static int atmel_isc_remove(struct platform_device *pdev) > >> > >> pm_runtime_disable(&pdev->dev); > >> > >> + isc_mc_cleanup(isc); > >> + > >> isc_subdev_cleanup(isc); > >> > >> v4l2_device_unregister(&isc->v4l2_dev); > >> diff --git a/drivers/media/platform/atmel/atmel-sama7g5-isc.c b/drivers/media/platform/atmel/atmel-sama7g5-isc.c > >> index 2b1082295c13..d2ac80b1ccc3 100644 > >> --- a/drivers/media/platform/atmel/atmel-sama7g5-isc.c > >> +++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c > >> @@ -523,15 +523,23 @@ static int microchip_xisc_probe(struct platform_device *pdev) > >> break; > >> } > >> > >> + regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver); > >> + > >> + ret = isc_mc_init(isc, ver); > >> + if (ret < 0) > >> + goto isc_probe_mc_init_err; > >> + > >> pm_runtime_set_active(dev); > >> pm_runtime_enable(dev); > >> pm_request_idle(dev); > >> > >> - regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver); > >> dev_info(dev, "Microchip XISC version %x\n", ver); > >> > >> return 0; > >> > >> +isc_probe_mc_init_err: > >> + isc_mc_cleanup(isc); > >> + > >> cleanup_subdev: > >> isc_subdev_cleanup(isc); > >> > >> @@ -552,6 +560,8 @@ static int microchip_xisc_remove(struct platform_device *pdev) > >> > >> pm_runtime_disable(&pdev->dev); > >> > >> + isc_mc_cleanup(isc); > >> + > >> isc_subdev_cleanup(isc); > >> > >> v4l2_device_unregister(&isc->v4l2_dev); > >> -- > >> 2.25.1 > >> >