[PATCH v3 0/9] dt-bindings: qcom: convert entire GSBI (QUP I2C/SPI/UART) to DT schema

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Mark Brown <broonie@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-i2c@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-serial@vger.kernel.org, linux-spi@vger.kernel.org
Cc: Kuldeep Singh <singh.kuldeep87k@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v3 0/9] dt-bindings: qcom: convert entire GSBI (QUP I2C/SPI/UART) to DT schema
Date: Sat,  2 Apr 2022 20:40:02 +0200	[thread overview]
Message-ID: <20220402184011.132465-1-krzysztof.kozlowski@linaro.org> (raw)

Hi,

Changes since v2
================
1. Several new schema patches (GSBI, I2C and UART schema).
2. Several DTS fixes for clocks and DMAs. The choice of dma tx-rx
   and clocks core-iface was by more-or-less number of fixes needed.
3. Add Kuldeep acks to patches without changes.

Changes since v1
================
1. Fix path in com/qcom,gsbi.txt.
2. Merge clock-names in example, correct $ref path (Kuldeep).

Merging
=======
1. The DTS patches are independent and silence warnings pointed
    out by schema.

2. The DT schema patches should be taken together as GSBI (final patch)
   depends on previous bindings.

Best regards,
Krzysztof

Cc: Kuldeep Singh <singh.kuldeep87k@gmail.com>

Krzysztof Kozlowski (9):
  arm64: dts: qcom: align dmas in I2C/SPI/UART with DT schema
  arm64: dts: qcom: align clocks in I2C/SPI with DT schema
  ARM: dts: qcom: ipq4019: align dmas in SPI/UART with DT schema
  ARM: dts: qcom: ipq4019: align clocks in I2C with DT schema
  ARM: dts: qcom: msm8660: disable GSBI8
  spi: dt-bindings: qcom,spi-qup: convert to dtschema
  dt-bindings: serial: qcom,msm-uartdm: convert to dtschema
  dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  dt-bindings: qcom: qcom,gsbi: convert to dtschema

 .../devicetree/bindings/i2c/qcom,i2c-qup.txt  |  40 ------
 .../devicetree/bindings/i2c/qcom,i2c-qup.yaml |  89 ++++++++++++
 .../bindings/serial/qcom,msm-uartdm.txt       |  81 -----------
 .../bindings/serial/qcom,msm-uartdm.yaml      | 112 +++++++++++++++
 .../bindings/soc/qcom/qcom,gsbi.txt           |  87 ------------
 .../bindings/soc/qcom/qcom,gsbi.yaml          | 133 ++++++++++++++++++
 .../devicetree/bindings/spi/qcom,spi-qup.txt  | 103 --------------
 .../devicetree/bindings/spi/qcom,spi-qup.yaml |  81 +++++++++++
 arch/arm/boot/dts/qcom-ipq4019.dtsi           |  36 ++---
 arch/arm/boot/dts/qcom-msm8660.dtsi           |   1 +
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |  20 +--
 arch/arm64/boot/dts/qcom/ipq8074.dtsi         |  40 +++---
 arch/arm64/boot/dts/qcom/msm8916.dtsi         |  68 ++++-----
 arch/arm64/boot/dts/qcom/msm8953.dtsi         |  48 +++----
 arch/arm64/boot/dts/qcom/msm8994.dtsi         |  42 +++---
 arch/arm64/boot/dts/qcom/msm8996.dtsi         |  36 ++---
 arch/arm64/boot/dts/qcom/qcs404.dtsi          |  92 ++++++------
 17 files changed, 607 insertions(+), 502 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
 delete mode 100644 Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
 create mode 100644 Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
 delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
 delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
 create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml

-- 
2.32.0