devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 07/15] arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema
Date: Sun, 25 Sep 2022 13:06:00 +0200	[thread overview]
Message-ID: <20220925110608.145728-8-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20220925110608.145728-1-krzysztof.kozlowski@linaro.org>

DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.

  qcom/sdm632-fairphone-fp3.dtb: pinctrl@1000000: 'cd-off-pins', 'cd-on-pins', 'gpio-key-default-pins', ....
    do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8953.dtsi | 70 +++++++++++++--------------
 1 file changed, 35 insertions(+), 35 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 6b992a6d56c1..db94e6fd18f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -460,229 +460,229 @@ tlmm: pinctrl@1000000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			uart_console_active: uart-console-active-pins {
+			uart_console_active: uart-console-active-state {
 				pins = "gpio4", "gpio5";
 				function = "blsp_uart2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			uart_console_sleep: uart-console-sleep-pins {
+			uart_console_sleep: uart-console-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "blsp_uart2";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			sdc1_clk_on: sdc1-clk-on-pins {
+			sdc1_clk_on: sdc1-clk-on-state {
 				pins = "sdc1_clk";
 				bias-disable;
 				drive-strength = <16>;
 			};
 
-			sdc1_clk_off: sdc1-clk-off-pins {
+			sdc1_clk_off: sdc1-clk-off-state {
 				pins = "sdc1_clk";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc1_cmd_on: sdc1-cmd-on-pins {
+			sdc1_cmd_on: sdc1-cmd-on-state {
 				pins = "sdc1_cmd";
 				bias-disable;
 				drive-strength = <10>;
 			};
 
-			sdc1_cmd_off: sdc1-cmd-off-pins {
+			sdc1_cmd_off: sdc1-cmd-off-state {
 				pins = "sdc1_cmd";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc1_data_on: sdc1-data-on-pins {
+			sdc1_data_on: sdc1-data-on-state {
 				pins = "sdc1_data";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc1_data_off: sdc1-data-off-pins {
+			sdc1_data_off: sdc1-data-off-state {
 				pins = "sdc1_data";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc1_rclk_on: sdc1-rclk-on-pins {
+			sdc1_rclk_on: sdc1-rclk-on-state {
 				pins = "sdc1_rclk";
 				bias-pull-down;
 			};
 
-			sdc1_rclk_off: sdc1-rclk-off-pins {
+			sdc1_rclk_off: sdc1-rclk-off-state {
 				pins = "sdc1_rclk";
 				bias-pull-down;
 			};
 
-			sdc2_clk_on: sdc2-clk-on-pins {
+			sdc2_clk_on: sdc2-clk-on-state {
 				pins = "sdc2_clk";
 				drive-strength = <16>;
 				bias-disable;
 			};
 
-			sdc2_clk_off: sdc2-clk-off-pins {
+			sdc2_clk_off: sdc2-clk-off-state {
 				pins = "sdc2_clk";
 				bias-disable;
 				drive-strength = <2>;
 			};
 
-			sdc2_cmd_on: sdc2-cmd-on-pins {
+			sdc2_cmd_on: sdc2-cmd-on-state {
 				pins = "sdc2_cmd";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc2_cmd_off: sdc2-cmd-off-pins {
+			sdc2_cmd_off: sdc2-cmd-off-state {
 				pins = "sdc2_cmd";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc2_data_on: sdc2-data-on-pins {
+			sdc2_data_on: sdc2-data-on-state {
 				pins = "sdc2_data";
 				bias-pull-up;
 				drive-strength = <10>;
 			};
 
-			sdc2_data_off: sdc2-data-off-pins {
+			sdc2_data_off: sdc2-data-off-state {
 				pins = "sdc2_data";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			sdc2_cd_on: cd-on-pins {
+			sdc2_cd_on: cd-on-state {
 				pins = "gpio133";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			sdc2_cd_off: cd-off-pins {
+			sdc2_cd_off: cd-off-state {
 				pins = "gpio133";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			gpio_key_default: gpio-key-default-pins {
+			gpio_key_default: gpio-key-default-state {
 				pins = "gpio85";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			i2c_1_default: i2c-1-default-pins {
+			i2c_1_default: i2c-1-default-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_1_sleep: i2c-1-sleep-pins {
+			i2c_1_sleep: i2c-1-sleep-state {
 				pins = "gpio2", "gpio3";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_2_default: i2c-2-default-pins {
+			i2c_2_default: i2c-2-default-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_2_sleep: i2c-2-sleep-pins {
+			i2c_2_sleep: i2c-2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_3_default: i2c-3-default-pins {
+			i2c_3_default: i2c-3-default-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_3_sleep: i2c-3-sleep-pins {
+			i2c_3_sleep: i2c-3-sleep-state {
 				pins = "gpio10", "gpio11";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_4_default: i2c-4-default-pins {
+			i2c_4_default: i2c-4-default-state {
 				pins = "gpio14", "gpio15";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_4_sleep: i2c-4-sleep-pins {
+			i2c_4_sleep: i2c-4-sleep-state {
 				pins = "gpio14", "gpio15";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_5_default: i2c-5-default-pins {
+			i2c_5_default: i2c-5-default-state {
 				pins = "gpio18", "gpio19";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_5_sleep: i2c-5-sleep-pins {
+			i2c_5_sleep: i2c-5-sleep-state {
 				pins = "gpio18", "gpio19";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_6_default: i2c-6-default-pins {
+			i2c_6_default: i2c-6-default-state {
 				pins = "gpio22", "gpio23";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_6_sleep: i2c-6-sleep-pins {
+			i2c_6_sleep: i2c-6-sleep-state {
 				pins = "gpio22", "gpio23";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_7_default: i2c-7-default-pins {
+			i2c_7_default: i2c-7-default-state {
 				pins = "gpio135", "gpio136";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_7_sleep: i2c-7-sleep-pins {
+			i2c_7_sleep: i2c-7-sleep-state {
 				pins = "gpio135", "gpio136";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_8_default: i2c-8-default-pins {
+			i2c_8_default: i2c-8-default-state {
 				pins = "gpio98", "gpio99";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			i2c_8_sleep: i2c-8-sleep-pins {
+			i2c_8_sleep: i2c-8-sleep-state {
 				pins = "gpio98", "gpio99";
 				function = "gpio";
 				drive-strength = <2>;
-- 
2.34.1


  parent reply	other threads:[~2022-09-25 11:06 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
2022-09-25 11:05 ` [PATCH 01/15] arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema Krzysztof Kozlowski
2022-09-27 12:33   ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 02/15] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable Krzysztof Kozlowski
2022-09-27 12:33   ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 03/15] arm64: dts: qcom: sc8280xp: align TLMM pin configuration with DT schema Krzysztof Kozlowski
2022-09-27 12:34   ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 04/15] arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema (really) Krzysztof Kozlowski
2022-09-27 12:36   ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 05/15] arm64: dts: qcom: sc7280-herobrine: correct number of gpio-line-names Krzysztof Kozlowski
2022-09-27 12:37   ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 06/15] arm64: dts: qcom: sc7280-idp-ec-h1: add missing QUP GPIO functions Krzysztof Kozlowski
2022-09-27 12:38   ` Konrad Dybcio
2022-09-25 11:06 ` Krzysztof Kozlowski [this message]
2022-09-27 12:38   ` [PATCH 07/15] arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema Konrad Dybcio
2022-09-25 11:06 ` [PATCH 08/15] arm64: dts: qcom: sdm845: " Krzysztof Kozlowski
2022-09-27 12:39   ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 09/15] arm64: dts: qcom: sm6125-sony-xperia: add missing SD CD GPIO functions Krzysztof Kozlowski
2022-09-27 12:39   ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 10/15] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema Krzysztof Kozlowski
2022-09-27 12:39   ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names Krzysztof Kozlowski
2022-09-27 12:41   ` Konrad Dybcio
2022-09-27 13:54     ` Krzysztof Kozlowski
2022-09-29 20:16   ` Rob Herring
2022-09-25 11:06 ` [PATCH 12/15] dt-bindings: pinctrl: qcom,sm8250: fix matching pin config Krzysztof Kozlowski
2022-09-26  8:47   ` Krzysztof Kozlowski
2022-09-25 11:06 ` [PATCH 13/15] dt-bindings: pinctrl: qcom,sm8250: add input-enable Krzysztof Kozlowski
2022-09-29 20:16   ` Rob Herring
2022-09-25 11:06 ` [PATCH 14/15] dt-bindings: pinctrl: qcom,sc7280: add bias-bus-hold and input-enable Krzysztof Kozlowski
2022-09-29 20:17   ` Rob Herring
2022-09-25 11:06 ` [PATCH 15/15] dt-bindings: pinctrl: qcom,sc7280: correct number of GPIOs Krzysztof Kozlowski
2022-09-29 20:17   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220925110608.145728-8-krzysztof.kozlowski@linaro.org \
    --to=krzysztof.kozlowski@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@somainline.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).