From: Philippe Schenker <dev@pschenker.ch>
To: devicetree@vger.kernel.org, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>,
Frank Rowand <frowand.list@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Fabio Estevam <festevam@gmail.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-arm-kernel@lists.infradead.org,
Philippe Schenker <philippe.schenker@toradex.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 14/23] arm64: dts: colibri-imx8x: Add colibri pwm b, c, d
Date: Tue, 14 Mar 2023 11:24:00 +0100 [thread overview]
Message-ID: <20230314102410.424773-15-dev@pschenker.ch> (raw)
In-Reply-To: <20230314102410.424773-1-dev@pschenker.ch>
From: Philippe Schenker <philippe.schenker@toradex.com>
Add Colibri PWM_B, PWM_C, PWM_D to the module-level device-tree and set
the status to ok on the eval-board.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
(no changes since v1)
.../dts/freescale/imx8x-colibri-eval-v3.dtsi | 15 +++++++++++++
.../boot/dts/freescale/imx8x-colibri.dtsi | 21 +++++++++++++++++++
2 files changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
index 1d0bad085ad4..68e34516961a 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -51,6 +51,21 @@ &lpuart2 {
status = "okay";
};
+/* Colibri PWM_B */
+&lsio_pwm0 {
+ status = "okay";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+ status = "okay";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+ status = "okay";
+};
+
/* Colibri UART_A */
&lpuart3 {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index 778f2f43a8c0..61033b79e44e 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -259,6 +259,27 @@ &lsio_gpio5 {
"UNUSABLE_SODIMM_184";
};
+/* Colibri PWM_B */
+&lsio_pwm0 {
+ #pwm-cells = <3>;
+ pinctrl-0 = <&pinctrl_pwm_b>;
+ pinctrl-names = "default";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+ #pwm-cells = <3>;
+ pinctrl-0 = <&pinctrl_pwm_c>;
+ pinctrl-names = "default";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+ #pwm-cells = <3>;
+ pinctrl-0 = <&pinctrl_pwm_d>;
+ pinctrl-names = "default";
+};
+
/* On-module eMMC */
&usdhc1 {
bus-width = <8>;
--
2.39.2
next prev parent reply other threads:[~2023-03-14 10:25 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-14 10:23 [PATCH v2 00/23] Update Colibri iMX8X Devicetrees Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 01/23] arm64: dts: colibri-imx8x: Prepare for qxp and dx variants Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 02/23] arm64: dts: colibri-imx8x: Update spdx license Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 03/23] arm64: dts: colibri-imx8x: Use new bracket format Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 04/23] arm64: dts: colibri-imx8x: Add atmel pinctrl groups Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 05/23] arm64: dts: colibri-imx8x: Add pinctrl group for csi_mclk Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 06/23] arm64: dts: colibri-imx8x: Split pinctrl_hog1 Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 07/23] arm64: dts: colibri-imx8x: Correct pull on lcdif Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 08/23] arm64: dts: colibri-imx8x: Add separate pinctrl group for cs2 Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 09/23] arm64: dts: colibri-imx8x: Add pinctrl group for hdmi hpd Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 10/23] arm64: dts: colibri-imx8x: Add SPI Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 11/23] arm64: dts: colibri-imx8x: Add gpio-line-names Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 12/23] arm64: dts: colibri-imx8x: Disable touchscreen by default Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 13/23] arm64: dts: colibri-imx8x: Add jpegenc/dec Philippe Schenker
2023-03-14 10:24 ` Philippe Schenker [this message]
2023-03-14 10:24 ` [PATCH v2 15/23] arm64: dts: colibri-imx8x: eval: Add spi-to-can Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 16/23] arm64: dts: colibri-imx8x: Add no-1-8-v to sd-card Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 17/23] arm64: dts: colibri-imx8x: Set thermal thresholds Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 18/23] arm64: dts: colibri-imx8x: Move gpio-keys to som level Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 19/23] arm64: dts: colibri-imx8x: Add todo comments Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 20/23] dt-bindings: arm: fsl: Add colibri-imx8x carrier boards Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 21/23] arm64: dts: colibri-imx8x: Add aster carrier board Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 22/23] arm64: dts: colibri-imx8x: Add iris " Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 23/23] arm64: dts: colibri-imx8x: Add iris v2 " Philippe Schenker
2023-03-27 2:11 ` [PATCH v2 00/23] Update Colibri iMX8X Devicetrees Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230314102410.424773-15-dev@pschenker.ch \
--to=dev@pschenker.ch \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frowand.list@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).