From: Andrew Hepp <andrew.hepp@ahepp.dev>
To: devicetree@vger.kernel.org, linux-iio@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Jonathan Cameron <jic23@kernel.org>,
Andrew Hepp <andrew.hepp@ahepp.dev>
Subject: [PATCH 2/2] iio: temperature: Add MCP9600 thermocouple EMF converter
Date: Sun, 19 Mar 2023 11:47:28 -0700 [thread overview]
Message-ID: <20230319184728.49232-3-andrew.hepp@ahepp.dev> (raw)
In-Reply-To: <20230319184728.49232-1-andrew.hepp@ahepp.dev>
Add support for the MCP9600 thermocouple EMF converter.
Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf
Signed-off-by: Andrew Hepp <andrew.hepp@ahepp.dev>
---
Changes for v6:
- read_word_swapped instead of block_data
Changes for v5:
- remove "driver" from subject
Changes for v4:
- none
Changes for v3:
- none
Changes for v2:
- remove unused sysfs include
- remove unused scan fields from channel
- warn rather than fail when probing unknown device
- register device through devm
- clean up style and prints
---
drivers/iio/temperature/Kconfig | 10 +++
drivers/iio/temperature/Makefile | 1 +
drivers/iio/temperature/mcp9600.c | 145 ++++++++++++++++++++++++++++++
3 files changed, 156 insertions(+)
create mode 100644 drivers/iio/temperature/mcp9600.c
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index ed384f33e0c7..ea2ce364b2e9 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -158,4 +158,14 @@ config MAX31865
This driver can also be build as a module. If so, the module
will be called max31865.
+config MCP9600
+ tristate "MCP9600 thermocouple EMF converter"
+ depends on I2C
+ help
+ If you say yes here you get support for MCP9600
+ thermocouple EMF converter connected via I2C.
+
+ This driver can also be built as a module. If so, the module
+ will be called mcp9600.
+
endmenu
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
index dfec8c6d3019..9330d4a39598 100644
--- a/drivers/iio/temperature/Makefile
+++ b/drivers/iio/temperature/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o
obj-$(CONFIG_MAX30208) += max30208.o
obj-$(CONFIG_MAX31856) += max31856.o
obj-$(CONFIG_MAX31865) += max31865.o
+obj-$(CONFIG_MCP9600) += mcp9600.o
obj-$(CONFIG_MLX90614) += mlx90614.o
obj-$(CONFIG_MLX90632) += mlx90632.o
obj-$(CONFIG_TMP006) += tmp006.o
diff --git a/drivers/iio/temperature/mcp9600.c b/drivers/iio/temperature/mcp9600.c
new file mode 100644
index 000000000000..b6d8ffb90c36
--- /dev/null
+++ b/drivers/iio/temperature/mcp9600.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * mcp9600.c - Support for Microchip MCP9600 thermocouple EMF converter
+ *
+ * Copyright (c) 2022 Andrew Hepp
+ * Author: <andrew.hepp@ahepp.dev>
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+
+/* MCP9600 registers */
+#define MCP9600_HOT_JUNCTION 0x0
+#define MCP9600_COLD_JUNCTION 0x2
+#define MCP9600_DEVICE_ID 0x20
+
+/* MCP9600 device id value */
+#define MCP9600_DEVICE_ID_MCP9600 0x40
+
+static const struct iio_chan_spec mcp9600_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .address = MCP9600_HOT_JUNCTION,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ },
+ {
+ .type = IIO_TEMP,
+ .address = MCP9600_COLD_JUNCTION,
+ .channel2 = IIO_MOD_TEMP_AMBIENT,
+ .modified = 1,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+struct mcp9600_data {
+ struct i2c_client *client;
+ struct mutex read_lock; /* lock to prevent concurrent reads */
+};
+
+static int mcp9600_read(struct mcp9600_data *data,
+ struct iio_chan_spec const *chan, int *val)
+{
+ __be16 buf;
+ int ret;
+
+ mutex_lock(&data->read_lock);
+ ret = i2c_smbus_read_word_swapped(data->client, chan->address);
+ mutex_unlock(&data->read_lock);
+
+ if (ret < 0)
+ return ret;
+ *val = ret;
+
+ return 0;
+}
+
+static int mcp9600_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct mcp9600_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = mcp9600_read(data, chan, val);
+ if (ret)
+ return ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 62;
+ *val2 = 500000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info mcp9600_info = {
+ .read_raw = mcp9600_read_raw,
+};
+
+static int mcp9600_probe(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev;
+ struct mcp9600_data *data;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, MCP9600_DEVICE_ID);
+ if (ret < 0)
+ return ret;
+ if (ret != MCP9600_DEVICE_ID_MCP9600)
+ dev_warn(&client->dev, "Expected ID %x, got %x\n",
+ MCP9600_DEVICE_ID_MCP9600, ret);
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ mutex_init(&data->read_lock);
+
+ indio_dev->info = &mcp9600_info;
+ indio_dev->name = "mcp9600";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = mcp9600_channels;
+ indio_dev->num_channels = ARRAY_SIZE(mcp9600_channels);
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id mcp9600_id[] = {
+ { "mcp9600" },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, mcp9600_id);
+
+static const struct of_device_id mcp9600_of_match[] = {
+ { .compatible = "microchip,mcp9600" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mcp9600_of_match);
+
+static struct i2c_driver mcp9600_driver = {
+ .driver = {
+ .name = "mcp9600",
+ .of_match_table = mcp9600_of_match,
+ },
+ .probe_new = mcp9600_probe,
+ .id_table = mcp9600_id
+};
+module_i2c_driver(mcp9600_driver);
+
+MODULE_AUTHOR("Andrew Hepp <andrew.hepp@ahepp.dev>");
+MODULE_DESCRIPTION("Microchip MCP9600 thermocouple EMF converter driver");
+MODULE_LICENSE("GPL");
--
2.30.2
next prev parent reply other threads:[~2023-03-19 18:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-19 18:47 [PATCH 0/2] Add support for the MCP9600 thermocouple EMF converter Andrew Hepp
2023-03-19 18:47 ` [PATCH 1/2] dt-bindings: iio: Add " Andrew Hepp
2023-03-20 6:45 ` Krzysztof Kozlowski
2023-03-19 18:47 ` Andrew Hepp [this message]
2023-03-19 18:59 ` [PATCH 2/2] iio: temperature: " Lars-Peter Clausen
2023-03-23 18:20 ` Andrew Hepp
2023-03-26 16:26 ` Jonathan Cameron
2023-03-19 21:24 ` kernel test robot
2023-03-19 18:52 ` [PATCH 0/2] Add support for the " Andrew Hepp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230319184728.49232-3-andrew.hepp@ahepp.dev \
--to=andrew.hepp@ahepp.dev \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).