Re: [PATCH V6 05/21] clk: tegra: pllout: Save and restore pllout context

[Dmitry Osipenko <digetx@gmail.com>]

21.07.2019 22:40, Sowjanya Komatineni пишет:
> This patch implements save and restore of pllout context.
> 
> During system suspend, core power goes off and looses the settings
> of the Tegra CAR controller registers.
> 
> So during suspend entry the state of pllout is saved and on resume
> it is restored back to have pllout in same state as before suspend.
> 
> pllout rate is saved and restore in clock divider so it will be at
> same rate as before suspend when pllout state is restored.
> 
> Acked-by: Thierry Reding <treding@nvidia.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  drivers/clk/tegra/clk-pll-out.c  | 28 ++++++++++++++++++++++++++++
>  drivers/clk/tegra/clk-tegra210.c |  3 ++-
>  drivers/clk/tegra/clk.h          |  9 +++++++++
>  3 files changed, 39 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/tegra/clk-pll-out.c b/drivers/clk/tegra/clk-pll-out.c
> index 35f2bf00e1e6..8f26a7e3e579 100644
> --- a/drivers/clk/tegra/clk-pll-out.c
> +++ b/drivers/clk/tegra/clk-pll-out.c
> @@ -69,10 +69,38 @@ static void clk_pll_out_disable(struct clk_hw *hw)
>  		spin_unlock_irqrestore(pll_out->lock, flags);
>  }
>  
> +static int tegra_clk_pll_out_save_context(struct clk_hw *hw)
> +{
> +	struct tegra_clk_pll_out *pll_out = to_clk_pll_out(hw);
> +
> +	if (pll_out->flags & TEGRA_PLLRE_OUT)
> +		pll_out->pllout_ctx = readl_relaxed(pll_out->reg);


> +	else
> +		pll_out->pllout_ctx = clk_hw_get_rate(hw);

This is unused?

> +	return 0;
> +}
> +
> +static void tegra_clk_pll_out_restore_context(struct clk_hw *hw)
> +{
> +	struct tegra_clk_pll_out *pll_out = to_clk_pll_out(hw);
> +
> +	if (pll_out->flags & TEGRA_PLLRE_OUT) {
> +		writel_relaxed(pll_out->pllout_ctx, pll_out->reg);
> +	} else {
> +		if (!__clk_get_enable_count(hw->clk))
> +			clk_pll_out_disable(hw);
> +		else
> +			clk_pll_out_enable(hw);
> +	}
> +}
> +
>  const struct clk_ops tegra_clk_pll_out_ops = {
>  	.is_enabled = clk_pll_out_is_enabled,
>  	.enable = clk_pll_out_enable,
>  	.disable = clk_pll_out_disable,
> +	.save_context = tegra_clk_pll_out_save_context,
> +	.restore_context = tegra_clk_pll_out_restore_context,
>  };
>  
>  struct clk *tegra_clk_register_pll_out(const char *name,
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index df172d5772d7..4721ee030d1c 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -3200,7 +3200,8 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
>  					 8, 8, 1, NULL);
>  	clk = tegra_clk_register_pll_out("pll_re_out1", "pll_re_out1_div",
>  					 clk_base + PLLRE_OUT1, 1, 0,
> -					 CLK_SET_RATE_PARENT, 0, NULL);
> +					 CLK_SET_RATE_PARENT, TEGRA_PLLRE_OUT,
> +					 NULL);
>  	clks[TEGRA210_CLK_PLL_RE_OUT1] = clk;
>  
>  	/* PLLE */
> diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
> index 83623f5f55f3..fb29a8c27873 100644
> --- a/drivers/clk/tegra/clk.h
> +++ b/drivers/clk/tegra/clk.h
> @@ -439,6 +439,12 @@ struct clk *tegra_clk_register_pllu_tegra210(const char *name,
>   * @rst_bit_idx:	bit to reset PLL divider
>   * @lock:		register lock
>   * @flags:		hardware-specific flags
> + * @pllout_ctx:		pllout context to save and restore during suspend
> + *			and resume
> + *
> + * Flags:
> + * TEGRA_PLLRE_OUT - This flag indicates that it is PLLRE_OUT and is used to
> + *		     identify PLLRE_OUT during clk_pll_out save and restore.
>   */
>  struct tegra_clk_pll_out {
>  	struct clk_hw	hw;
> @@ -447,8 +453,11 @@ struct tegra_clk_pll_out {
>  	u8		rst_bit_idx;
>  	spinlock_t	*lock;
>  	u8		flags;
> +	unsigned int	pllout_ctx;

u32

>  };
>  
> +#define TEGRA_PLLRE_OUT BIT(0)
> +
>  #define to_clk_pll_out(_hw) container_of(_hw, struct tegra_clk_pll_out, hw)
>  
>  extern const struct clk_ops tegra_clk_pll_out_ops;
>