Re: [PATCH v2 2/2] dt-bindings: PCI: Convert PCIe Host/Endpoint in Cadence platform to DT schema

From: Kishon Vijay Abraham I <kishon@ti.com>
To: Rob Herring <robh@kernel.org>
Cc: Tom Joseph <tjoseph@cadence.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Andrew Murray <amurray@thegoodpenguin.co.uk>,
	Mark Rutland <mark.rutland@arm.com>, <linux-pci@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 2/2] dt-bindings: PCI: Convert PCIe Host/Endpoint in Cadence platform to DT schema
Date: Mon, 24 Feb 2020 15:48:21 +0530	[thread overview]
Message-ID: <2b927c66-d640-fb11-878a-c69a459a28f8@ti.com> (raw)
In-Reply-To: <20200219203205.GA14068@bogus>

Hi Rob,

On 20/02/20 2:02 am, Rob Herring wrote:
> On Mon, Feb 17, 2020 at 04:45:19PM +0530, Kishon Vijay Abraham I wrote:
>> Include Cadence core DT schema and define the Cadence platform DT schema
>> for both Host and Endpoint mode. Note: The Cadence core DT schema could
>> be included for other platforms using Cadence PCIe core.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  .../bindings/pci/cdns,cdns-pcie-ep.txt        | 27 -------
>>  .../bindings/pci/cdns,cdns-pcie-ep.yaml       | 48 ++++++++++++
>>  .../bindings/pci/cdns,cdns-pcie-host.txt      | 66 ----------------
>>  .../bindings/pci/cdns,cdns-pcie-host.yaml     | 76 +++++++++++++++++++
>>  MAINTAINERS                                   |  2 +-
>>  5 files changed, 125 insertions(+), 94 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
>>  create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
>>  delete mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>>  create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
> 
> 
>> diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
>> new file mode 100644
>> index 000000000000..2f605297f862
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
>> @@ -0,0 +1,76 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-host.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Cadence PCIe host controller
>> +
>> +maintainers:
>> +  - Tom Joseph <tjoseph@cadence.com>
>> +
>> +allOf:
>> +  - $ref: /schemas/pci/pci-bus.yaml#
>> +  - $ref: "cdns-pcie-host.yaml#"
>> +
>> +properties:
>> +  compatible:
>> +    const: cdns,cdns-pcie-host
>> +
>> +  reg:
>> +    maxItems: 3
>> +
>> +  reg-names:
>> +    items:
>> +      - const: reg
>> +      - const: cfg
>> +      - const: mem
>> +
>> +  msi-parent: true
>> +
>> +required:
>> +  - reg
>> +  - reg-names
>> +
>> +examples:
>> +  - |
>> +    bus {
>> +        #address-cells = <2>;
>> +        #size-cells = <2>;
>> +
>> +        pcie@fb000000 {
>> +            compatible = "cdns,cdns-pcie-host";
>> +            device_type = "pci";
>> +            #address-cells = <3>;
>> +            #size-cells = <2>;
>> +            bus-range = <0x0 0xff>;
>> +            linux,pci-domain = <0>;
>> +            cdns,max-outbound-regions = <16>;
>> +            cdns,no-bar-match-nbits = <32>;
> 
>> +            vendor-id = /bits/ 16 <0x17cd>;
>> +            device-id = /bits/ 16 <0x0200>;
> 
> Please make these 32-bit as that is what the spec says.

Can you clarify this is mentioned in which spec? PCI spec has both of
these 16 bits and I checked the PCI binding doc but couldn't spot the
size of these fields.

[1] -> https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf

Thanks
Kishon