devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Hanks Chen <hanks.chen@mediatek.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	mtk01761 <wendell.lin@mediatek.com>,
	YueHaibing <yuehaibing@huawei.com>,
	Andy Teng <andy.teng@mediatek.com>,
	linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org, CC Hwang <cc.hwang@mediatek.com>,
	Loda Chou <loda.chou@mediatek.com>
Subject: Re: [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779
Date: Thu, 27 Aug 2020 10:20:14 +0200	[thread overview]
Message-ID: <3648b63d-7521-fdfd-831e-6851fe555ca5@gmail.com> (raw)
In-Reply-To: <1596594249.11014.1.camel@mtkswgap22>



On 05/08/2020 04:24, Hanks Chen wrote:
> Hi Matthias and all,
> 
> Gentle ping on this patch.
> 

I'm fine with the patch. I'm waiting on the clk part to be accepted, then I'll 
take this one.

Regards,
Matthias

> Thanks
> 
> 
> Hanks Chen
> 
> On Thu, 2020-07-30 at 21:30 +0800, Hanks Chen wrote:
>> this adds initial MT6779 dts settings for board support,
>> including cpu, gic, timer, ccf, pinctrl, uart, sysirq...etc.
>>
>> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
>> ---
>>   arch/arm64/boot/dts/mediatek/Makefile       |   1 +
>>   arch/arm64/boot/dts/mediatek/mt6779-evb.dts |  31 +++
>>   arch/arm64/boot/dts/mediatek/mt6779.dtsi    | 271 ++++++++++++++++++++
>>   3 files changed, 303 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>>   create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
>> index a57af9da9f5c..4d1b0f9d8d1c 100644
>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>> @@ -1,6 +1,7 @@
>>   # SPDX-License-Identifier: GPL-2.0
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>> new file mode 100644
>> index 000000000000..164f5cbb3821
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>> @@ -0,0 +1,31 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (c) 2019 MediaTek Inc.
>> + * Author: Mars.C <mars.cheng@mediatek.com>
>> + *
>> + */
>> +
>> +/dts-v1/;
>> +#include "mt6779.dtsi"
>> +
>> +/ {
>> +	model = "MediaTek MT6779 EVB";
>> +	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +	};
>> +
>> +	memory@40000000 {
>> +		device_type = "memory";
>> +		reg = <0 0x40000000 0 0x1e800000>;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:921600n8";
>> +	};
>> +};
>> +
>> +&uart0 {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
>> new file mode 100644
>> index 000000000000..370f309d32de
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
>> @@ -0,0 +1,271 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (c) 2019 MediaTek Inc.
>> + * Author: Mars.C <mars.cheng@mediatek.com>
>> + *
>> + */
>> +
>> +#include <dt-bindings/clock/mt6779-clk.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
>> +
>> +/ {
>> +	compatible = "mediatek,mt6779";
>> +	interrupt-parent = <&sysirq>;
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	psci {
>> +		compatible = "arm,psci-0.2";
>> +		method = "smc";
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		cpu0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x000>;
>> +		};
>> +
>> +		cpu1: cpu@1 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x100>;
>> +		};
>> +
>> +		cpu2: cpu@2 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x200>;
>> +		};
>> +
>> +		cpu3: cpu@3 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x300>;
>> +		};
>> +
>> +		cpu4: cpu@4 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x400>;
>> +		};
>> +
>> +		cpu5: cpu@5 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x500>;
>> +		};
>> +
>> +		cpu6: cpu@6 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a75";
>> +			enable-method = "psci";
>> +			reg = <0x600>;
>> +		};
>> +
>> +		cpu7: cpu@7 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a75";
>> +			enable-method = "psci";
>> +			reg = <0x700>;
>> +		};
>> +	};
>> +
>> +	pmu {
>> +		compatible = "arm,armv8-pmuv3";
>> +		interrupt-parent = <&gic>;
>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
>> +	};
>> +
>> +	clk26m: oscillator@0 {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <26000000>;
>> +		clock-output-names = "clk26m";
>> +	};
>> +
>> +	clk32k: oscillator@1 {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <32768>;
>> +		clock-output-names = "clk32k";
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv8-timer";
>> +		interrupt-parent = <&gic>;
>> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
>> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
>> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
>> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
>> +	};
>> +
>> +	soc {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		compatible = "simple-bus";
>> +		ranges;
>> +
>> +		gic: interrupt-controller@0c000000 {
>> +			compatible = "arm,gic-v3";
>> +			#interrupt-cells = <4>;
>> +			interrupt-parent = <&gic>;
>> +			interrupt-controller;
>> +			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
>> +			      <0 0x0c040000 0 0x200000>; /* GICR */
>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
>> +
>> +			ppi-partitions {
>> +				ppi_cluster0: interrupt-partition-0 {
>> +					affinity = <&cpu0 &cpu1 \
>> +						&cpu2 &cpu3 &cpu4 &cpu5>;
>> +				};
>> +				ppi_cluster1: interrupt-partition-1 {
>> +					affinity = <&cpu6 &cpu7>;
>> +				};
>> +			};
>> +
>> +		};
>> +
>> +		sysirq: intpol-controller@0c53a650 {
>> +			compatible = "mediatek,mt6779-sysirq",
>> +				     "mediatek,mt6577-sysirq";
>> +			interrupt-controller;
>> +			#interrupt-cells = <3>;
>> +			interrupt-parent = <&gic>;
>> +			reg = <0 0x0c53a650 0 0x50>;
>> +		};
>> +
>> +		topckgen: clock-controller@10000000 {
>> +			compatible = "mediatek,mt6779-topckgen", "syscon";
>> +			reg = <0 0x10000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		infracfg_ao: clock-controller@10001000 {
>> +			compatible = "mediatek,mt6779-infracfg_ao", "syscon";
>> +			reg = <0 0x10001000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		pio: pinctrl@10005000 {
>> +			compatible = "mediatek,mt6779-pinctrl", "syscon";
>> +			reg = <0 0x10005000 0 0x1000>,
>> +			      <0 0x11c20000 0 0x1000>,
>> +			      <0 0x11d10000 0 0x1000>,
>> +			      <0 0x11e20000 0 0x1000>,
>> +			      <0 0x11e70000 0 0x1000>,
>> +			      <0 0x11ea0000 0 0x1000>,
>> +			      <0 0x11f20000 0 0x1000>,
>> +			      <0 0x11f30000 0 0x1000>,
>> +			      <0 0x1000b000 0 0x1000>;
>> +			reg-names = "gpio", "iocfg_rm",
>> +				    "iocfg_br", "iocfg_lm",
>> +				    "iocfg_lb", "iocfg_rt",
>> +				    "iocfg_lt", "iocfg_tl",
>> +				    "eint";
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +			gpio-ranges = <&pio 0 0 210>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
>> +		};
>> +
>> +		apmixed: clock-controller@1000c000 {
>> +			compatible = "mediatek,mt6779-apmixed", "syscon";
>> +			reg = <0 0x1000c000 0 0xe00>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		uart0: serial@11002000 {
>> +			compatible = "mediatek,mt6779-uart",
>> +				     "mediatek,mt6577-uart";
>> +			reg = <0 0x11002000 0 0x400>;
>> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
>> +			clock-names = "baud", "bus";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart1: serial@11003000 {
>> +			compatible = "mediatek,mt6779-uart",
>> +				     "mediatek,mt6577-uart";
>> +			reg = <0 0x11003000 0 0x400>;
>> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
>> +			clock-names = "baud", "bus";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart2: serial@11004000 {
>> +			compatible = "mediatek,mt6779-uart",
>> +				     "mediatek,mt6577-uart";
>> +			reg = <0 0x11004000 0 0x400>;
>> +			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>;
>> +			clock-names = "baud", "bus";
>> +			status = "disabled";
>> +		};
>> +
>> +		audio: clock-controller@11210000 {
>> +			compatible = "mediatek,mt6779-audio", "syscon";
>> +			reg = <0 0x11210000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		mfgcfg: clock-controller@13fbf000 {
>> +			compatible = "mediatek,mt6779-mfgcfg", "syscon";
>> +			reg = <0 0x13fbf000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		mmsys: syscon@14000000 {
>> +			compatible = "mediatek,mt6779-mmsys", "syscon";
>> +			reg = <0 0x14000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		imgsys: clock-controller@15020000 {
>> +			compatible = "mediatek,mt6779-imgsys", "syscon";
>> +			reg = <0 0x15020000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		vdecsys: clock-controller@16000000 {
>> +			compatible = "mediatek,mt6779-vdecsys", "syscon";
>> +			reg = <0 0x16000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		vencsys: clock-controller@17000000 {
>> +			compatible = "mediatek,mt6779-vencsys", "syscon";
>> +			reg = <0 0x17000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		camsys: clock-controller@1a000000 {
>> +			compatible = "mediatek,mt6779-camsys", "syscon";
>> +			reg = <0 0x1a000000 0 0x10000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		ipesys: clock-controller@1b000000 {
>> +			compatible = "mediatek,mt6779-ipesys", "syscon";
>> +			reg = <0 0x1b000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +	};
>> +};
> 

  reply	other threads:[~2020-08-27  8:20 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30 13:30 [PATCH v10 0/3] Add basic SoC Support for Mediatek MT6779 SoC Hanks Chen
2020-07-30 13:30 ` [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek " Hanks Chen
2020-07-31 18:26   ` Rob Herring
2020-08-03 23:31   ` Linus Walleij
2020-07-30 13:30 ` [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779 Hanks Chen
2020-08-05  2:24   ` Hanks Chen
2020-08-27  8:20     ` Matthias Brugger [this message]
2020-10-09 12:30   ` Matthias Brugger
2020-07-30 13:30 ` [PATCH v10 3/3] clk: mediatek: add UART0 clock support Hanks Chen
2020-09-08  6:25   ` Hanks Chen
2020-10-03 10:06     ` Hanks Chen
2020-10-08  2:00       ` Stephen Boyd
2020-10-08  2:39         ` Hanks Chen
2020-10-08 21:45           ` Stephen Boyd
2020-10-08  7:25         ` Matthias Brugger
2020-10-08 21:45   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3648b63d-7521-fdfd-831e-6851fe555ca5@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=andy.teng@mediatek.com \
    --cc=cc.hwang@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hanks.chen@mediatek.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=loda.chou@mediatek.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=wendell.lin@mediatek.com \
    --cc=yuehaibing@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).