From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Caleb Robey <c-robey@ti.com>, <linux-omap@vger.kernel.org>
Cc: "Jason Kridner" <jkridner@gmail.com>,
"Lokesh Vutla" <lokeshvutla@ti.com>, "Jason Kridner" <jdk@ti.com>,
"Faiz Abbas" <faiz_abbas@ti.com>,
"Andreas Dannenberg" <dannenberg@ti.com>,
"Jean-Jacques Hiblot" <jjhiblot@ti.com>,
"Praneeth Bajjuri" <praneeth@ti.com>,
"Andrew F . Davis" <afd@ti.com>, "Tom Rini" <trini@konsulko.com>,
"Robert Nelson" <robertcnelson@gmail.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] ARM: dts: am5729: beaglebone-ai: adding device tree
Date: Thu, 21 Nov 2019 13:07:20 +0200 [thread overview]
Message-ID: <41c73bc1-99ae-6797-5bb7-7acc0f6518c0@ti.com> (raw)
In-Reply-To: <20191120220559.18914-1-c-robey@ti.com>
On 21/11/2019 00:05, Caleb Robey wrote:
> From: Jason Kridner <jdk@ti.com>
>
> BeagleBoard.org BeagleBone AI is an open source hardware single
> board computer based on the Texas Instruments AM5729 SoC featuring
> dual-core 1.5GHz Arm Cortex-A15 processor, dual-core C66 digital
> signal processor (DSP), quad-core embedded vision engine (EVE),
> Arm Cortex-M4 processors, dual programmable realtime unit
> industrial control subsystems and more. The board features 1GB
> DDR3L, USB3.0 Type-C, USB HS Type-A, microHDMI, 16GB eMMC flash,
> 1G Ethernet, 802.11ac 2/5GHz, Bluetooth, and BeagleBone expansion
> headers.
>
> For more information, refer to:
> https://beaglebone.ai
>
> This patch introduces the BeagleBone AI device tree.
>
> Note that the device use the "ti,tpd12s016" component which is
> software compatible with "ti,tpd12s015". Thus we only use the
> latter driver.
Ah. thanks. I see my comments resolved here.
no more comments to net part from my side.
>
> Signed-off-by: Jason Kridner <jdk@ti.com>
> Signed-off-by: Caleb Robey <c-robey@ti.com>
> Cc: Robert Nelson <robertcnelson@gmail.com>
>
>
> ---
>
> V2 Changes:
> - dra7.dtsi was reintroduced and components that are only
> not present in upstream linux dts were removed.
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/am5729-beagleboneai.dts | 731 ++++++++++++++++++++++
> arch/arm/boot/dts/dra7.dtsi | 2 +-
> 3 files changed, 733 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/am5729-beagleboneai.dts
>
[..]
--
Best regards,
grygorii
next prev parent reply other threads:[~2019-11-21 11:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 22:05 [PATCH v2] ARM: dts: am5729: beaglebone-ai: adding device tree Caleb Robey
2019-11-21 11:07 ` Grygorii Strashko [this message]
2019-12-12 17:04 ` Tony Lindgren
2020-03-31 18:38 ` Drew Fustini
2020-03-31 18:46 ` Tony Lindgren
2020-03-31 20:30 ` Drew Fustini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41c73bc1-99ae-6797-5bb7-7acc0f6518c0@ti.com \
--to=grygorii.strashko@ti.com \
--cc=afd@ti.com \
--cc=bcousson@baylibre.com \
--cc=c-robey@ti.com \
--cc=dannenberg@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=faiz_abbas@ti.com \
--cc=jdk@ti.com \
--cc=jjhiblot@ti.com \
--cc=jkridner@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=mark.rutland@arm.com \
--cc=praneeth@ti.com \
--cc=robertcnelson@gmail.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
--cc=trini@konsulko.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).