From mboxrd@z Thu Jan  1 00:00:00 1970
From: Abhishek Sahu <absahu@codeaurora.org>
Subject: Re: [PATCH 09/15] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3
 board file
Date: Sat, 03 Feb 2018 17:07:19 +0530
Message-ID: <4a173ff2a74ed7d1555d52674cf64ddd@codeaurora.org>
References: <1517202689-14212-1-git-send-email-sricharan@codeaurora.org>
 <1517202689-14212-10-git-send-email-sricharan@codeaurora.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-arm-msm-owner@vger.kernel.org>
In-Reply-To: <1517202689-14212-10-git-send-email-sricharan@codeaurora.org>
Sender: linux-arm-msm-owner@vger.kernel.org
To: Sricharan R <sricharan@codeaurora.org>
Cc: robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, andy.gross@linaro.org, david.brown@linaro.org, catalin.marinas@arm.com, will.deacon@arm.com, sboyd@codeaurora.org, bjorn.andersson@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, linux-arm-msm-owner@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On 2018-01-29 10:41, Sricharan R wrote:
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
>  arch/arm/boot/dts/Makefile                      |  1 +
>  arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts | 14 ++++++++++++++
>  2 files changed, 15 insertions(+)
>  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 68e4b15..0104ba2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -727,6 +727,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>  	qcom-ipq4019-ap.dk01.1-c2.dtb \
>  	qcom-ipq4019-ap.dk04.1-c1.dtb \
>  	qcom-ipq4019-ap.dk04.1-c5.dtb \
> +	qcom-ipq4019-ap.dk04.1-c3.dtb \
>  	qcom-ipq8064-ap148.dtb \
>  	qcom-msm8660-surf.dtb \
>  	qcom-msm8960-cdp.dtb \
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> new file mode 100644
> index 0000000..7a93fc4
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2017, The Linux Foundation. All rights reserved.
> +
> +#include "qcom-ipq4019-ap.dk04.1.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
> +
> +	soc {
> +		nand: qpic-nand@79b0000 {
> +			status = "disabled";
> +		};

  Normally we need to disable in base dtsi and enable in
  board dtsi so that base dtsi will always work in all the
  boards. Now If We load the base dtsi in any DK04 board
  other than C1, then nand failure will come.

  Thanks,
  Abhishek