On Tue, 2019-11-19 at 11:17 +0000, Andrew Murray wrote:
> On Tue, Nov 12, 2019 at 04:59:21PM +0100, Nicolas Saenz Julienne wrote:
> > From: Jim Quinlan <james.quinlan@broadcom.com>
> > 
> > The DT bindings description of the brcmstb PCIe device is described.
> > This node can only be used for now on the Raspberry Pi 4.
> > 
> > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > 
> > ---
> > 
> > Changes since v1:
> >   - Fix commit Subject
> >   - Remove linux,pci-domain
> > 
> > This was based on Jim's original submission[1], converted to yaml and
> > adapted to the RPi4 case.
> > 
> > [1] https://patchwork.kernel.org/patch/10605937/
> > 
> >  .../bindings/pci/brcm,stb-pcie.yaml           | 110 ++++++++++++++++++
> >  1 file changed, 110 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > new file mode 100644
> > index 000000000000..4cbb18821300
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > @@ -0,0 +1,110 @@
> > +# SPDX-License-Identifier: GPL-2.0
> 
> I think in the last revision Rob asked you to change the license to
> the following:
> 
> # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

Yes, but I had already sent this series by then. v3 will have all the fixes in.

Regards,
Nicolas