From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dmitry Osipenko <digetx@gmail.com>
Subject: Re: [PATCH V5 08/18] clk: tegra: Add suspend resume support for DFLL
Date: Sat, 29 Jun 2019 16:28:53 +0300
Message-ID: <594adc1e-4345-33ae-c79f-ad6f00964587@gmail.com>
References: <1561687972-19319-1-git-send-email-skomatineni@nvidia.com>
 <1561687972-19319-9-git-send-email-skomatineni@nvidia.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <1561687972-19319-9-git-send-email-skomatineni@nvidia.com>
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
To: Sowjanya Komatineni <skomatineni@nvidia.com>, thierry.reding@gmail.com, jonathanh@nvidia.com, tglx@linutronix.de, jason@lakedaemon.net, marc.zyngier@arm.com, linus.walleij@linaro.org, stefan@agner.ch, mark.rutland@arm.com
Cc: pdeschrijver@nvidia.com, pgaikwad@nvidia.com, sboyd@kernel.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, jckuo@nvidia.com, josephl@nvidia.com, talho@nvidia.com, linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org, mperttunen@nvidia.com, spatra@nvidia.com, robh+dt@kernel.org, devicetree@vger.kernel.org
List-Id: devicetree@vger.kernel.org

28.06.2019 5:12, Sowjanya Komatineni пишет:
> This patch creates APIs for supporting Tegra210 clock driver to
> perform DFLL suspend and resume operation.
> 
> During suspend, DFLL mode is saved and on resume Tegra210 clock driver
> invokes DFLL resume API to re-initialize DFLL to enable target device
> clock in open loop mode or closed loop mode.
> 
> Acked-by: Thierry Reding <treding@nvidia.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  drivers/clk/tegra/clk-dfll.c | 78 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/tegra/clk-dfll.h |  2 ++
>  2 files changed, 80 insertions(+)
> 
> diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
> index f8688c2ddf1a..a1f37cf99b00 100644
> --- a/drivers/clk/tegra/clk-dfll.c
> +++ b/drivers/clk/tegra/clk-dfll.c
> @@ -277,6 +277,7 @@ struct tegra_dfll {
>  	unsigned long			dvco_rate_min;
>  
>  	enum dfll_ctrl_mode		mode;
> +	enum dfll_ctrl_mode		resume_mode;
>  	enum dfll_tune_range		tune_range;
>  	struct dentry			*debugfs_dir;
>  	struct clk_hw			dfll_clk_hw;
> @@ -1864,6 +1865,83 @@ static int dfll_fetch_common_params(struct tegra_dfll *td)
>  }
>  
>  /*
> + * tegra_dfll_suspend
> + * @pdev: DFLL instance
> + *
> + * dfll controls clock/voltage to other devices, including CPU. Therefore,
> + * dfll driver pm suspend callback does not stop cl-dvfs operations.
> + */
> +void tegra_dfll_suspend(struct platform_device *pdev)
> +{
> +	struct tegra_dfll *td = dev_get_drvdata(&pdev->dev);
> +
> +	if (!td)
> +		return;
> +
> +	if (td->mode <= DFLL_DISABLED)
> +		return;
> +
> +	td->resume_mode = td->mode;
> +	switch (td->mode) {
> +	case DFLL_CLOSED_LOOP:
> +		dfll_set_mode(td, DFLL_CLOSED_LOOP);
> +		dfll_set_frequency_request(td, &td->last_req);
> +
> +		dfll_unlock(td);
> +		break;
> +	default:
> +		break;
> +	}
> +}
> +
> +/**
> + * tegra_dfll_resume - reprogram the DFLL after context-loss
> + * @pdev: DFLL instance
> + *
> + * Re-initialize and enable target device clock in open loop mode. Called
> + * directly from SoC clock resume syscore operation. Closed loop will be
> + * re-entered in platform syscore ops as well after CPU clock source is
> + * switched to DFLL in open loop.
> + */
> +void tegra_dfll_resume(struct platform_device *pdev, bool on_dfll)
> +{
> +	struct tegra_dfll *td = dev_get_drvdata(&pdev->dev);
> +
> +	if (!td)
> +		return;
> +
> +	if (on_dfll) {
> +		if (td->resume_mode == DFLL_CLOSED_LOOP)
> +			dfll_lock(td);
> +		td->resume_mode = DFLL_DISABLED;
> +		return;
> +	}
> +
> +	reset_control_deassert(td->dvco_rst);
> +
> +	pm_runtime_get(td->dev);

pm_runtime_get_sync()?

Otherwise looks like you're risking a lot here because pm_runtime_get() is an
asynchronous request.

> +	/* Re-init DFLL */
> +	dfll_init_out_if(td);
> +	dfll_set_default_params(td);
> +	dfll_set_open_loop_config(td);
> +
> +	pm_runtime_put(td->dev);
> +
> +	/* Restore last request and mode up to open loop */
> +	switch (td->resume_mode) {
> +	case DFLL_CLOSED_LOOP:
> +	case DFLL_OPEN_LOOP:
> +		dfll_set_mode(td, DFLL_OPEN_LOOP);
> +		if (td->pmu_if == TEGRA_DFLL_PMU_I2C)
> +			dfll_i2c_set_output_enabled(td, false);
> +		break;
> +	default:
> +		break;
> +	}
> +}