Re: [PATCH v2 3/6] arm64: dts: ti: k3-j721e-main: Add serdes_ln_ctrl node to select SERDES lane mux

[Roger Quadros <rogerq@ti.com>]

Kishon, Rob,

On 19/03/2020 13:37, Kishon Vijay Abraham I wrote:
> Hi Rob,
> 
> On 11/03/20 2:39 am, Rob Herring wrote:
>> On Tue, Mar 03, 2020 at 12:17:19PM +0200, Roger Quadros wrote:
>>> From: Kishon Vijay Abraham I <kishon@ti.com>
>>>
>>> Add serdes_ln_ctrl node used for selecting SERDES lane mux.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>>> ---
>>>   arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 27 ++++++++++++
>>>   include/dt-bindings/mux/mux-j721e-wiz.h   | 53 +++++++++++++++++++++++
>>>   2 files changed, 80 insertions(+)
>>>   create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>>> index cbaadee5bfdc..c5d54af37e91 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>>> @@ -5,6 +5,8 @@
>>>    * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
>>>    */
>>>   #include <dt-bindings/phy/phy.h>
>>> +#include <dt-bindings/mux/mux.h>
>>> +#include <dt-bindings/mux/mux-j721e-wiz.h>
>>>   
>>>   &cbass_main {
>>>   	msmc_ram: sram@70000000 {
>>> @@ -19,6 +21,31 @@
>>>   		};
>>>   	};
>>>   
>>> +	scm_conf: scm-conf@100000 {
>>> +		compatible = "syscon", "simple-mfd", "ti,j721e-system-controller";
>>
>> Wrong ordering. Most significant first.
>>
>>> +		reg = <0 0x00100000 0 0x1c000>;
>>> +		#address-cells = <1>;
>>> +		#size-cells = <1>;
>>> +		ranges = <0x0 0x0 0x00100000 0x1c000>;
>>> +
>>> +		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
>>
>> Your syscon.yaml change is not valid if you have child nodes. Do a
>> specific binding for this block.
> 
> Do you mean in addition to having platform specific binding for
> scm-conf, I need to have platform specific binding for serdes-ln-ctrl.
> 
> Since the driver doesn't do any platform specific stuff, the driver
> doesn't have to change. Is that correct?
> 

Any resolution on this?

cheers,
-roger

> Thanks
> Kishon
>>
>>> +			compatible = "mmio-mux";
>>> +			reg = <0x00004080 0x50>;
>>> +			#mux-control-cells = <1>;
>>> +			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
>>> +					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
>>> +					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
>>> +					<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
>>> +					<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
>>> +					/* SERDES4 lane0/1/2/3 select */
>>> +			idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
>>> +				      <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
>>> +				      <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
>>> +				      <MUX_IDLE_AS_IS>, <SERDES3_LANE1_USB3_0>,
>>> +				      <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
>>> +		};
>>> +	};
>>> +
>>>   	gic500: interrupt-controller@1800000 {
>>>   		compatible = "arm,gic-v3";
>>>   		#address-cells = <2>;
>>> diff --git a/include/dt-bindings/mux/mux-j721e-wiz.h b/include/dt-bindings/mux/mux-j721e-wiz.h
>>> new file mode 100644
>>> index 000000000000..fd1c4ea9fc7f
>>> --- /dev/null
>>> +++ b/include/dt-bindings/mux/mux-j721e-wiz.h
>>> @@ -0,0 +1,53 @@
>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>> +/*
>>> + * This header provides constants for J721E WIZ.
>>> + */
>>> +
>>> +#ifndef _DT_BINDINGS_J721E_WIZ
>>> +#define _DT_BINDINGS_J721E_WIZ
>>> +
>>> +#define SERDES0_LANE0_QSGMII_LANE1	0x0
>>> +#define SERDES0_LANE0_PCIE0_LANE0	0x1
>>> +#define SERDES0_LANE0_USB3_0_SWAP	0x2
>>> +
>>> +#define SERDES0_LANE1_QSGMII_LANE2	0x0
>>> +#define SERDES0_LANE1_PCIE0_LANE1	0x1
>>> +#define SERDES0_LANE1_USB3_0		0x2
>>> +
>>> +#define SERDES1_LANE0_QSGMII_LANE3	0x0
>>> +#define SERDES1_LANE0_PCIE1_LANE0	0x1
>>> +#define SERDES1_LANE0_USB3_1_SWAP	0x2
>>> +#define SERDES1_LANE0_SGMII_LANE0	0x3
>>> +
>>> +#define SERDES1_LANE1_QSGMII_LANE4	0x0
>>> +#define SERDES1_LANE1_PCIE1_LANE1	0x1
>>> +#define SERDES1_LANE1_USB3_1		0x2
>>> +#define SERDES1_LANE1_SGMII_LANE1	0x3
>>> +
>>> +#define SERDES2_LANE0_PCIE2_LANE0	0x1
>>> +#define SERDES2_LANE0_SGMII_LANE0	0x3
>>> +#define SERDES2_LANE0_USB3_1_SWAP	0x2
>>> +
>>> +#define SERDES2_LANE1_PCIE2_LANE1	0x1
>>> +#define SERDES2_LANE1_USB3_1		0x2
>>> +#define SERDES2_LANE1_SGMII_LANE1	0x3
>>> +
>>> +#define SERDES3_LANE0_PCIE3_LANE0	0x1
>>> +#define SERDES3_LANE0_USB3_0_SWAP	0x2
>>> +
>>> +#define SERDES3_LANE1_PCIE3_LANE1	0x1
>>> +#define SERDES3_LANE1_USB3_0		0x2
>>> +
>>> +#define SERDES4_LANE0_EDP_LANE0		0x0
>>> +#define SERDES4_LANE0_QSGMII_LANE5	0x2
>>> +
>>> +#define SERDES4_LANE1_EDP_LANE1		0x0
>>> +#define SERDES4_LANE1_QSGMII_LANE6	0x2
>>> +
>>> +#define SERDES4_LANE2_EDP_LANE2		0x0
>>> +#define SERDES4_LANE2_QSGMII_LANE7	0x2
>>> +
>>> +#define SERDES4_LANE3_EDP_LANE3		0x0
>>> +#define SERDES4_LANE3_QSGMII_LANE8	0x2
>>> +
>>> +#endif /* _DT_BINDINGS_J721E_WIZ */
>>> -- 
>>> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>>> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>>>

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki