From: Sander Vanheule <sander@svanheule.net>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
Lee Jones <lee.jones@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Michael Walle <michael@walle.cc>,
Linux LED Subsystem <linux-leds@vger.kernel.org>,
devicetree <devicetree@vger.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
Hans de Goede <hdegoede@redhat.com>, Andrew Lunn <andrew@lunn.ch>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Mark Brown <broonie@kernel.org>
Subject: Re: [PATCH v4 3/5] mfd: Add RTL8231 core device
Date: Sat, 05 Jun 2021 13:07:44 +0200 [thread overview]
Message-ID: <76c058318f5c5d984ade4f65bb359e686836b0b4.camel@svanheule.net> (raw)
In-Reply-To: <CAHp75VeLUufwYagvQ2M+VKsivUzmnHHHQeH4E8-uN2avRWmBag@mail.gmail.com>
On Thu, 2021-06-03 at 13:58 +0300, Andy Shevchenko wrote:
> On Thu, Jun 3, 2021 at 1:01 PM Sander Vanheule <sander@svanheule.net> wrote:
> > +static int rtl8231_reg_read(void *context, unsigned int reg, unsigned int
> > *val)
> > +{
> > + struct mdio_device *mdio_dev = context;
> > + int ret;
> > +
> > + ret = mdiobus_read(mdio_dev->bus, mdio_dev->addr,
> > RTL8231_REAL_REG(reg));
> > +
> > + if (ret < 0)
> > + return ret;
> > +
> > + *val = ret & 0xffff;
> > +
> > + return 0;
> > +}
> > +
> > +static int rtl8231_reg_write(void *context, unsigned int reg, unsigned int
> > val)
> > +{
> > + struct mdio_device *mdio_dev = context;
> > +
> > + return mdiobus_write(mdio_dev->bus, mdio_dev->addr,
> > RTL8231_REAL_REG(reg), val);
> > +}
>
> Hmm... Maybe we can amend regmap-mdio to avoid duplication of the
> above? Something like xlate in gpio-regmap or so?
(+Cc Mark for the regmap discussion)
It turns out that I can't use both devm_regmap_init_mdio and the overrides
regmap_config.reg_read/write. This appears to be in contrast to what the
documentation for these two overrides suggest. devm_regmap_init_mdio provides a
bus for the regmap, which causes the overrides to be ignored in regmap.c
Then I tried to use the paging support provided by regmap, by adding the
following config:
static struct regmap_range_cfg rtl8231_reg_ranges[] = {
{
/* Specify an unused register with an empty mask */
.selector_reg = 0x1f,
.selector_mask = 0x00,
.selector_shift = 0,
.range_min = 0x00,
.range_max = RTL8231_VREG(RTL8231_REG_COUNT - 1),
.window_start = 0x00,
.window_len = 0x20,
},
};
This also doesn't work, because the used _regmap_bus_reg_read/write don't
resolve register pages. The patch below fixes this, but maybe this missing
functionality is intentional, and I should actually implement
regmap_bus.read/write?
----8<----
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 0d185ec018a5..20b6a2e0d2e3 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1881,6 +1881,15 @@ static int _regmap_bus_reg_write(void *context, unsigned
int reg,
unsigned int val)
{
struct regmap *map = context;
+ struct regmap_range_node *range;
+ int ret;
+
+ range = _regmap_range_lookup(map, reg);
+ if (range) {
+ ret = _regmap_select_page(map, ®, range, 1);
+ if (ret != 0)
+ return ret;
+ }
return map->bus->reg_write(map->bus_context, reg, val);
}
@@ -2651,6 +2660,15 @@ static int _regmap_bus_reg_read(void *context, unsigned
int reg,
unsigned int *val)
{
struct regmap *map = context;
+ struct regmap_range_node *range;
+ int ret;
+
+ range = _regmap_range_lookup(map, reg);
+ if (range) {
+ ret = _regmap_select_page(map, ®, range, 1);
+ if (ret != 0)
+ return ret;
+ }
return map->bus->reg_read(map->bus_context, reg, val);
}
--
Best,
Sander
next prev parent reply other threads:[~2021-06-05 11:07 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 12:25 [PATCH 0/5] RTL8231 GPIO expander support Sander Vanheule
2021-05-11 12:25 ` [PATCH 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-05-17 22:31 ` Rob Herring
2021-05-19 16:39 ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 2/5] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-17 22:38 ` Rob Herring
2021-05-19 16:53 ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 3/5] mfd: Add RTL8231 core device Sander Vanheule
2021-05-12 12:29 ` kernel test robot
2021-05-12 13:13 ` kernel test robot
2021-05-19 14:58 ` Lee Jones
2021-05-19 15:11 ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 4/5] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-11 12:25 ` [PATCH 5/5] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
[not found] ` <CAHp75VffoKyyPJbdtKMLx575c9LT0S8+EHOk7Mw36j=aTL6Q4Q@mail.gmail.com>
2021-05-16 21:40 ` [PATCH 0/5] RTL8231 GPIO expander support Sander Vanheule
2021-05-17 8:13 ` Andy Shevchenko
2021-05-17 8:50 ` Sander Vanheule
2021-05-17 19:32 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 0/7] " Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 1/7] regmap: Add MDIO bus support Sander Vanheule
2021-05-19 16:12 ` Mark Brown
2021-05-17 19:28 ` [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order Sander Vanheule
2021-05-17 21:06 ` Andy Shevchenko
2021-05-18 1:40 ` Andrew Lunn
2021-05-18 11:39 ` Sander Vanheule
2021-05-23 22:21 ` Sander Vanheule
2021-05-18 8:39 ` Michael Walle
2021-05-18 10:39 ` Andy Shevchenko
2021-05-23 21:19 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 3/7] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 4/7] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-18 22:02 ` Linus Walleij
2021-05-17 19:28 ` [PATCH v2 5/7] mfd: Add RTL8231 core device Sander Vanheule
2021-05-17 21:18 ` Andy Shevchenko
2021-05-23 21:28 ` Sander Vanheule
2021-05-24 7:49 ` Andy Shevchenko
2021-05-24 7:50 ` Sander Vanheule
2021-05-24 7:55 ` Andy Shevchenko
2021-05-24 8:04 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-17 21:42 ` Andy Shevchenko
2021-05-17 21:46 ` Andy Shevchenko
2021-05-23 21:42 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 7/7] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-05-17 22:00 ` Andy Shevchenko
2021-05-23 21:53 ` Sander Vanheule
2021-05-19 16:10 ` (subset) [PATCH v2 0/7] RTL8231 GPIO expander support Mark Brown
2021-05-23 22:33 ` [PATCH v3 0/6] " Sander Vanheule
2021-05-23 22:33 ` [PATCH v3 1/6] gpio: regmap: Add quirk for output data register Sander Vanheule
2021-05-28 6:40 ` Michael Walle
2021-06-03 10:03 ` Sander Vanheule
2021-05-31 7:25 ` Bartosz Golaszewski
2021-05-23 22:34 ` [PATCH v3 2/6] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-06-02 18:58 ` Rob Herring
2021-05-23 22:34 ` [PATCH v3 3/6] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-27 23:31 ` Linus Walleij
2021-06-02 19:02 ` Rob Herring
2021-05-23 22:34 ` [PATCH v3 4/6] mfd: Add RTL8231 core device Sander Vanheule
2021-05-24 8:02 ` Andy Shevchenko
2021-05-24 8:23 ` Sander Vanheule
2021-05-24 10:18 ` Andy Shevchenko
2021-05-24 11:41 ` Sander Vanheule
2021-05-23 22:34 ` [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-28 6:29 ` Michael Walle
2021-05-28 6:42 ` Sander Vanheule
2021-05-28 6:43 ` Michael Walle
2021-05-23 22:34 ` [PATCH v3 6/6] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-05-24 10:24 ` Andy Shevchenko
2021-05-24 12:04 ` Sander Vanheule
2021-05-24 12:47 ` Andy Shevchenko
2021-05-24 15:30 ` Sander Vanheule
2021-05-24 1:10 ` [PATCH v3 0/6] RTL8231 GPIO expander support Andrew Lunn
2021-05-24 7:53 ` Andy Shevchenko
2021-05-24 11:41 ` Sander Vanheule
2021-05-24 12:54 ` Andy Shevchenko
2021-05-24 15:03 ` Sander Vanheule
2021-05-24 16:30 ` Andy Shevchenko
2021-05-25 17:11 ` Andy Shevchenko
2021-05-25 18:00 ` Sander Vanheule
2021-05-26 21:02 ` Sander Vanheule
2021-05-27 10:38 ` Andy Shevchenko
2021-05-27 10:41 ` Hans de Goede
2021-05-24 15:20 ` Sander Vanheule
2021-05-28 6:37 ` Michael Walle
2021-05-30 16:19 ` Sander Vanheule
2021-05-30 16:51 ` Hans de Goede
2021-05-30 18:16 ` Andy Shevchenko
2021-05-30 21:22 ` Michael Walle
2021-05-31 8:36 ` Sander Vanheule
2021-05-31 10:02 ` Michael Walle
[not found] ` <CAHp75VfOrUBRQH1vrXEwHN4ZPojQfQju-_wp_3djZeozEaatug@mail.gmail.com>
2021-05-31 15:33 ` [PATCH 0/5] " Sander Vanheule
2021-05-31 15:48 ` Andy Shevchenko
2021-06-01 11:49 ` Michael Walle
2021-06-01 15:24 ` Andy Shevchenko
2021-06-02 20:20 ` Sander Vanheule
2021-06-01 9:59 ` [PATCH v3 0/6] " Linus Walleij
2021-06-01 10:18 ` Michael Walle
2021-06-01 10:51 ` Linus Walleij
2021-06-01 11:41 ` Michael Walle
2021-06-01 11:48 ` Linus Walleij
2021-06-03 10:00 ` [PATCH v4 0/5] " Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 2/5] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 3/5] mfd: Add RTL8231 core device Sander Vanheule
2021-06-03 10:58 ` Andy Shevchenko
2021-06-03 11:28 ` Sander Vanheule
2021-06-03 14:03 ` Andrew Lunn
2021-06-03 15:20 ` Sander Vanheule
2021-06-05 11:07 ` Sander Vanheule [this message]
2021-06-03 10:00 ` [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-06-03 10:18 ` Andy Shevchenko
2021-06-03 15:58 ` kernel test robot
2021-06-04 7:00 ` Sander Vanheule
2021-06-04 22:10 ` Linus Walleij
2021-06-03 10:00 ` [PATCH v4 5/5] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-06-03 11:01 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=76c058318f5c5d984ade4f65bb359e686836b0b4.camel@svanheule.net \
--to=sander@svanheule.net \
--cc=andrew@lunn.ch \
--cc=andy.shevchenko@gmail.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hdegoede@redhat.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=michael@walle.cc \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).