From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: Re: [PATCHv5 5/5] ARM: dts: imx6q-b450v3: Add switch port configuration Date: Tue, 23 Jan 2018 07:34:52 -0800 Message-ID: <7a37e9a0-ec55-8a5c-3f21-f2e2a8a962f4@gmail.com> References: <20180123150350.11031-1-sebastian.reichel@collabora.co.uk> <20180123150350.11031-6-sebastian.reichel@collabora.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180123150350.11031-6-sebastian.reichel@collabora.co.uk> Content-Language: en-US Sender: netdev-owner@vger.kernel.org To: Sebastian Reichel , Andrew Lunn , Vivien Didelot , Shawn Guo , Sascha Hauer , Fabio Estevam Cc: Ian Ray , Nandor Han , Rob Herring , "David S. Miller" , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, kernel@lists.collabora.co.uk List-Id: devicetree@vger.kernel.org On 01/23/2018 07:03 AM, Sebastian Reichel wrote: > This adds support for the Marvell switch and names the network > ports according to the labels, that can be found next to the > connectors. The switch is connected to the host system using a > PCI based network card. > > The PCI bus configuration has been written using the following > information: > > root@b450v3# lspci -tv > -[0000:00]---00.0-[01]----00.0 Intel Corporation I210 Gigabit Network Connection > root@b450v3# lspci -nn > 00:00.0 PCI bridge [0604]: Synopsys, Inc. Device [16c3:abcd] (rev 01) > 01:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) > > Signed-off-by: Sebastian Reichel Reviewed-by: Florian Fainelli -- Florian