From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id E7FD2C3E8C5 for ; Sun, 29 Nov 2020 11:18:27 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A738920771 for ; Sun, 29 Nov 2020 11:18:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725882AbgK2LSM (ORCPT ); Sun, 29 Nov 2020 06:18:12 -0500 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:57049 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725852AbgK2LSL (ORCPT ); Sun, 29 Nov 2020 06:18:11 -0500 X-Originating-IP: 91.175.115.186 Received: from localhost (91-175-115-186.subs.proxad.net [91.175.115.186]) (Authenticated sender: gregory.clement@bootlin.com) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 264EEE0006; Sun, 29 Nov 2020 11:17:27 +0000 (UTC) From: Gregory CLEMENT To: Vladimir Vid , devicetree@vger.kernel.org Cc: pali@kernel.org, a.heider@gmail.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, tmn505@gmail.com, sebastian.hesselbarth@gmail.com, andrew@lunn.ch, jason@lakedaemon.net, robh+dt@kernel.org, Vladimir Vid Subject: Re: [PATCH v5] arm64: dts: marvell: add DT for ESPRESSObin-Ultra In-Reply-To: <20201026184441.96395-1-vladimir.vid@sartura.hr> References: <20201026184441.96395-1-vladimir.vid@sartura.hr> Date: Sun, 29 Nov 2020 12:17:27 +0100 Message-ID: <87sg8sjttk.fsf@BL-laptop> MIME-Version: 1.0 Content-Type: text/plain Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Hi Vladimir, > This adds support for ESPRESSObin-Ultra from Globalscale. > > Specifications are similar to the base ESPRESSObin board, with main > difference being being WAN port with PoE capability and 2 additional ethernet ports. > > Full specifications: > > 1x Marvell 64 bit Dual Core ARM A53 Armada 3700 SOC clocked up to 1.2Ghz > 1x Topaz 6341 Networking Switch > 1GB DDR4 > 8GB eMMC > 1x WAN with 30W POE > 4x Gb LAN > 1x RTC Clock and battery > 1x DC Jack > 1x USB 3.0 Type A > 1x USB 2.0 Type A > 1x SIM NanoSIM card Slot > 1x Power Button > 4x LED > 1x Reset button > 1x microUSB for UART > 1x M.2 2280 slot for memory > 1x 2x2 802.11ac Wi-Fi > 1x MiniPCIE slot for Wi-Fi (PCIe interface) > > Signed-off-by: Vladimir Vid Applied on mvebu/dt64 I know that usb3 node is not yet enabled but we are a really close to the end of the merge window for ARM so let's have this version in 5.11, and then we can improve it in future version. Thanks, Gregory > --- > > v5 changes: > - update ethernet-phy@1 to match reg value > > --- > arch/arm64/boot/dts/marvell/Makefile | 1 + > .../marvell/armada-3720-espressobin-ultra.dts | 165 ++++++++++++++++++ > 2 files changed, 166 insertions(+) > create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts > > diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile > index 3e5f2e7a040c..094f451fdd1d 100644 > --- a/arch/arm64/boot/dts/marvell/Makefile > +++ b/arch/arm64/boot/dts/marvell/Makefile > @@ -3,6 +3,7 @@ > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb > +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb > dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts > new file mode 100644 > index 000000000000..c5eb3604dd5b > --- /dev/null > +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts > @@ -0,0 +1,165 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Device Tree file for ESPRESSObin-Ultra board. > + * Copyright (C) 2019 Globalscale technologies, Inc. > + * > + * Jason Hung > + */ > + > +/dts-v1/; > + > +#include "armada-3720-espressobin.dtsi" > + > +/ { > + model = "Globalscale Marvell ESPRESSOBin Ultra Board"; > + compatible = "globalscale,espressobin-ultra", "marvell,armada3720", > + "marvell,armada3710"; > + > + aliases { > + /* ethernet1 is WAN port */ > + ethernet1 = &switch0port5; > + ethernet2 = &switch0port1; > + ethernet3 = &switch0port2; > + ethernet4 = &switch0port3; > + ethernet5 = &switch0port4; > + }; > + > + reg_usb3_vbus: usb3-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usb3-vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + enable-active-high; > + gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>; > + }; > + > + usb3_phy: usb3-phy { > + compatible = "usb-nop-xceiv"; > + vcc-supply = <®_usb3_vbus>; > + }; > + > + gpio-leds { > + pinctrl-names = "default"; > + compatible = "gpio-leds"; > + /* No assigned functions to the LEDs by default */ > + led1 { > + label = "ebin-ultra:blue:led1"; > + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; > + }; > + led2 { > + label = "ebin-ultra:green:led2"; > + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; > + }; > + led3 { > + label = "ebin-ultra:red:led3"; > + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; > + }; > + led4 { > + label = "ebin-ultra:yellow:led4"; > + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; > + }; > + }; > +}; > + > +&sdhci0 { > + status = "okay"; > +}; > + > +&sdhci1 { > + status = "disabled"; > +}; > + > +&spi0 { > + flash@0 { > + spi-max-frequency = <108000000>; > + spi-rx-bus-width = <4>; > + spi-tx-bus-width = <4>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "firmware"; > + reg = <0x0 0x3e0000>; > + }; > + partition@3e0000 { > + label = "hw-info"; > + reg = <0x3e0000 0x10000>; > + read-only; > + }; > + partition@3f0000 { > + label = "u-boot-env"; > + reg = <0x3f0000 0x10000>; > + }; > + }; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins>; > + > + clock-frequency = <100000>; > + > + rtc@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; > +}; > + > +&usb3 { > + usb-phy = <&usb3_phy>; > + status = "disabled"; > +}; > + > +&mdio { > + extphy: ethernet-phy@1 { > + reg = <1>; > + }; > +}; > + > +&switch0 { > + reg = <3>; > + > + ports { > + switch0port1: port@1 { > + reg = <1>; > + label = "lan0"; > + phy-handle = <&switch0phy0>; > + }; > + > + switch0port2: port@2 { > + reg = <2>; > + label = "lan1"; > + phy-handle = <&switch0phy1>; > + }; > + > + switch0port3: port@3 { > + reg = <3>; > + label = "lan2"; > + phy-handle = <&switch0phy2>; > + }; > + > + switch0port4: port@4 { > + reg = <4>; > + label = "lan3"; > + phy-handle = <&switch0phy3>; > + }; > + > + switch0port5: port@5 { > + reg = <5>; > + label = "wan"; > + phy-handle = <&extphy>; > + phy-mode = "sgmii"; > + }; > + }; > + > + mdio { > + switch0phy3: switch0phy3@14 { > + reg = <0x14>; > + }; > + }; > +}; > -- > 2.27.0 > -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com