From: Cyrille Pitchen <cyrille.pitchen-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
kishon-l0cyMroinI0@public.gmane.org,
lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org,
linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: adouglas-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org,
stelford-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org,
dgary-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org,
kgopi-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org,
eandrews-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org,
thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
sureshp-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org,
nsekhar-l0cyMroinI0@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Cyrille Pitchen
<cyrille.pitchen-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Subject: [PATCH v5 01/11] PCI: Regroup all PCI related entries into drivers/pci/Makefile
Date: Sun, 28 Jan 2018 21:40:15 +0100 [thread overview]
Message-ID: <974a5595d6462861cb0f58b4f6303462b8ba7c91.1517170521.git.cyrille.pitchen@free-electrons.com> (raw)
In-Reply-To: <cover.1517170521.git.cyrille.pitchen-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
In-Reply-To: <cover.1517170521.git.cyrille.pitchen-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries
from drivers/Makefile into drivers/pci/Makefile.
Since we don't want to introduce any dependency between CONFIG_PCI and
CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile.
Hence all Makefiles in drivers/pci/ were updated accordingly so no file is
compiled when CONFIG_PCI is not defined.
Also, we add a comment to reinforce that EPC and EPF libraries must be
initialized before their users. Hence built-in EPC drivers, such as
those of Designware, are linked after the endpoint core libraries.
Finally, we add another comment to explain why obj-y has been chosen
instead of obj-$(CONFIG_PCIE_DW) to parse the dwc/ sub-folder.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
drivers/Makefile | 5 +----
drivers/pci/Kconfig | 1 +
drivers/pci/Makefile | 13 ++++++++++---
drivers/pci/dwc/Makefile | 2 ++
drivers/pci/host/Makefile | 2 ++
5 files changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/Makefile b/drivers/Makefile
index e06f7f633f73..8189b1edec00 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -16,10 +16,7 @@ obj-$(CONFIG_PINCTRL) += pinctrl/
obj-$(CONFIG_GPIOLIB) += gpio/
obj-y += pwm/
-obj-$(CONFIG_PCI) += pci/
-obj-$(CONFIG_PCI_ENDPOINT) += pci/endpoint/
-# PCI dwc controller drivers
-obj-y += pci/dwc/
+obj-y += pci/
obj-$(CONFIG_PARISC) += parisc/
obj-$(CONFIG_RAPIDIO) += rapidio/
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index bda151788f3f..7eeb969ab86a 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -125,6 +125,7 @@ config PCI_PASID
config PCI_LABEL
def_bool y if (DMI || ACPI)
+ depends on PCI
select NLS
config PCI_HYPERV
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index c7819b973df7..ddb5aa6640d7 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -3,12 +3,15 @@
# Makefile for the PCI bus specific drivers.
#
-obj-y += access.o bus.o probe.o host-bridge.o remove.o pci.o \
+obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o remove.o pci.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
irq.o vpd.o setup-bus.o vc.o mmap.o setup-irq.o
+ifdef CONFIG_PCI
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_SYSFS) += slot.o
+obj-$(CONFIG_OF) += of.o
+endif
obj-$(CONFIG_PCI_QUIRKS) += quirks.o
@@ -44,10 +47,14 @@ obj-$(CONFIG_PCI_ECAM) += ecam.o
obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
-obj-$(CONFIG_OF) += of.o
-
ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
# PCI host controller drivers
obj-y += host/
obj-y += switch/
+
+obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
+
+# Endpoint library must be initialized before its users
+# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
+obj-y += dwc/
diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
index a9d8a6fb48e3..5d2ce72c7a52 100644
--- a/drivers/pci/dwc/Makefile
+++ b/drivers/pci/dwc/Makefile
@@ -25,4 +25,6 @@ obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
# ARM64 and use internal ifdefs to only build the pieces we need
# depending on whether ACPI, the DT driver, or both are enabled.
+ifdef CONFIG_PCI
obj-$(CONFIG_ARM64) += pcie-hisi.o
+endif
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 34ec1d88f961..3b1059190867 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -34,6 +34,8 @@ obj-$(CONFIG_VMD) += vmd.o
# ARM64 and use internal ifdefs to only build the pieces we need
# depending on whether ACPI, the DT driver, or both are enabled.
+ifdef CONFIG_PCI
obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
obj-$(CONFIG_ARM64) += pci-thunder-pem.o
obj-$(CONFIG_ARM64) += pci-xgene.o
+endif
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-01-28 20:40 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-28 20:40 [PATCH v5 00/11] PCI: Add support to the Cadence PCIe controller Cyrille Pitchen
[not found] ` <cover.1517170521.git.cyrille.pitchen-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2018-01-28 20:40 ` Cyrille Pitchen [this message]
2018-01-28 20:40 ` [PATCH v5 02/11] PCI: OF: Add generic function to parse and allocate PCI resources Cyrille Pitchen
2018-01-28 20:40 ` [PATCH v5 03/11] PCI: generic: fix missing call of pci_free_resource_list() Cyrille Pitchen
2018-01-28 20:40 ` [PATCH v5 04/11] PCI: Add generic function to probe PCI host controllers Cyrille Pitchen
2018-01-28 20:40 ` [PATCH v5 05/11] PCI: Add vendor ID for Cadence Cyrille Pitchen
2018-01-28 20:40 ` [PATCH v5 06/11] dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller Cyrille Pitchen
2018-01-28 20:40 ` [PATCH v5 07/11] PCI: cadence: Add host driver for Cadence PCIe controller Cyrille Pitchen
2018-01-28 20:40 ` [PATCH v5 08/11] PCI: endpoint: Add the function number as argument to EPC ops Cyrille Pitchen
2018-01-28 20:40 ` [PATCH v5 09/11] PCI: endpoint: Fix EPF device name to support multi-function devices Cyrille Pitchen
2018-01-28 20:40 ` [PATCH v5 10/11] dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller Cyrille Pitchen
2018-01-28 20:40 ` [PATCH v5 11/11] PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller Cyrille Pitchen
2018-01-28 21:47 ` [PATCH v5 00/11] PCI: Add support to the " Bjorn Helgaas
[not found] ` <20180128214741.GA232763-1RhO1Y9PlrlHTL0Zs8A6p5iNqAH0jzoTYJqu5kTmcBRl57MIdRCFDg@public.gmane.org>
2018-01-30 11:41 ` Lorenzo Pieralisi
[not found] ` <20180130114155.GA12009-4tUPXFaYRHv6sAKXYmQ0tx/iLCjYCKR+VpNB7YpNyf8@public.gmane.org>
2018-01-30 21:12 ` Cyrille Pitchen
[not found] ` <8cec81b2-85c4-d7bf-4171-9e94a745eab0-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2018-02-06 9:39 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=974a5595d6462861cb0f58b4f6303462b8ba7c91.1517170521.git.cyrille.pitchen@free-electrons.com \
--to=cyrille.pitchen-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
--cc=adouglas-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org \
--cc=bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dgary-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org \
--cc=eandrews-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org \
--cc=kgopi-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org \
--cc=kishon-l0cyMroinI0@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=stelford-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org \
--cc=sureshp-vna1KIf7WgpBDgjK7y7TUQ@public.gmane.org \
--cc=thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).