devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ryder Lee <ryder.lee@mediatek.com>
To: Stephen Boyd <sboyd@codeaurora.org>, Rob Herring <robh+dt@kernel.org>
Cc: Mark Brown <broonie@kernel.org>, Lee Jones <lee.jones@linaro.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-clk@vger.kernel.org,
	Garlic Tseng <garlic.tseng@mediatek.com>,
	Ryder Lee <ryder.lee@mediatek.com>
Subject: [PATCH v2 3/5] clk: mediatek: add audsys support for MT2701
Date: Wed, 31 Jan 2018 15:42:43 +0800	[thread overview]
Message-ID: <99afcd2aeb87ad30dd565cb9bf86ee3239142e08.1515639336.git.ryder.lee@mediatek.com> (raw)
In-Reply-To: <cover.1515639336.git.ryder.lee@mediatek.com>

Add clock driver support for MT2701 audsys.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 drivers/clk/mediatek/Kconfig          |   6 ++
 drivers/clk/mediatek/Makefile         |   1 +
 drivers/clk/mediatek/clk-mt2701-aud.c | 175 ++++++++++++++++++++++++++++++++++
 3 files changed, 182 insertions(+)
 create mode 100644 drivers/clk/mediatek/clk-mt2701-aud.c

diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 59dc0aa..efb6f58 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -50,6 +50,12 @@ config COMMON_CLK_MT2701_BDPSYS
 	---help---
 	  This driver supports Mediatek MT2701 bdpsys clocks.
 
+config COMMON_CLK_MT2701_AUDSYS
+	bool "Clock driver for Mediatek MT2701 audsys"
+	depends on COMMON_CLK_MT2701
+	---help---
+	  This driver supports Mediatek MT2701 audsys clocks.
+
 config COMMON_CLK_MT2712
 	bool "Clock driver for Mediatek MT2712"
 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index c421ffc..c4ab7d3 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_COMMON_CLK_MT6797_MMSYS) += clk-mt6797-mm.o
 obj-$(CONFIG_COMMON_CLK_MT6797_VDECSYS) += clk-mt6797-vdec.o
 obj-$(CONFIG_COMMON_CLK_MT6797_VENCSYS) += clk-mt6797-venc.o
 obj-$(CONFIG_COMMON_CLK_MT2701) += clk-mt2701.o
+obj-$(CONFIG_COMMON_CLK_MT2701_AUDSYS) += clk-mt2701-aud.o
 obj-$(CONFIG_COMMON_CLK_MT2701_BDPSYS) += clk-mt2701-bdp.o
 obj-$(CONFIG_COMMON_CLK_MT2701_ETHSYS) += clk-mt2701-eth.o
 obj-$(CONFIG_COMMON_CLK_MT2701_HIFSYS) += clk-mt2701-hif.o
diff --git a/drivers/clk/mediatek/clk-mt2701-aud.c b/drivers/clk/mediatek/clk-mt2701-aud.c
new file mode 100644
index 0000000..d8005b3
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-aud.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+#define GATE_AUDIO0(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &audio0_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_no_setclr,	\
+	}
+
+#define GATE_AUDIO1(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &audio1_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_no_setclr,	\
+	}
+
+#define GATE_AUDIO2(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &audio2_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_no_setclr,	\
+	}
+
+#define GATE_AUDIO3(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &audio3_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_no_setclr,	\
+	}
+
+static const struct mtk_gate_regs audio0_cg_regs = {
+	.set_ofs = 0x0,
+	.clr_ofs = 0x0,
+	.sta_ofs = 0x0,
+};
+
+static const struct mtk_gate_regs audio1_cg_regs = {
+	.set_ofs = 0x10,
+	.clr_ofs = 0x10,
+	.sta_ofs = 0x10,
+};
+
+static const struct mtk_gate_regs audio2_cg_regs = {
+	.set_ofs = 0x14,
+	.clr_ofs = 0x14,
+	.sta_ofs = 0x14,
+};
+
+static const struct mtk_gate_regs audio3_cg_regs = {
+	.set_ofs = 0x634,
+	.clr_ofs = 0x634,
+	.sta_ofs = 0x634,
+};
+
+static const struct mtk_gate audio_clks[] = {
+	/* AUDIO0 */
+	GATE_AUDIO0(CLK_AUD_AFE, "audio_afe", "aud_intbus_sel", 2),
+	GATE_AUDIO0(CLK_AUD_HDMI, "audio_hdmi", "audpll_sel", 20),
+	GATE_AUDIO0(CLK_AUD_SPDF, "audio_spdf", "audpll_sel", 21),
+	GATE_AUDIO0(CLK_AUD_SPDF2, "audio_spdf2", "audpll_sel", 22),
+	GATE_AUDIO0(CLK_AUD_APLL, "audio_apll", "audpll_sel", 23),
+	/* AUDIO1 */
+	GATE_AUDIO1(CLK_AUD_I2SIN1, "audio_i2sin1", "aud_mux1_sel", 0),
+	GATE_AUDIO1(CLK_AUD_I2SIN2, "audio_i2sin2", "aud_mux1_sel", 1),
+	GATE_AUDIO1(CLK_AUD_I2SIN3, "audio_i2sin3", "aud_mux1_sel", 2),
+	GATE_AUDIO1(CLK_AUD_I2SIN4, "audio_i2sin4", "aud_mux1_sel", 3),
+	GATE_AUDIO1(CLK_AUD_I2SIN5, "audio_i2sin5", "aud_mux1_sel", 4),
+	GATE_AUDIO1(CLK_AUD_I2SIN6, "audio_i2sin6", "aud_mux1_sel", 5),
+	GATE_AUDIO1(CLK_AUD_I2SO1, "audio_i2so1", "aud_mux1_sel", 6),
+	GATE_AUDIO1(CLK_AUD_I2SO2, "audio_i2so2", "aud_mux1_sel", 7),
+	GATE_AUDIO1(CLK_AUD_I2SO3, "audio_i2so3", "aud_mux1_sel", 8),
+	GATE_AUDIO1(CLK_AUD_I2SO4, "audio_i2so4", "aud_mux1_sel", 9),
+	GATE_AUDIO1(CLK_AUD_I2SO5, "audio_i2so5", "aud_mux1_sel", 10),
+	GATE_AUDIO1(CLK_AUD_I2SO6, "audio_i2so6", "aud_mux1_sel", 11),
+	GATE_AUDIO1(CLK_AUD_ASRCI1, "audio_asrci1", "asm_h_sel", 12),
+	GATE_AUDIO1(CLK_AUD_ASRCI2, "audio_asrci2", "asm_h_sel", 13),
+	GATE_AUDIO1(CLK_AUD_ASRCO1, "audio_asrco1", "asm_h_sel", 14),
+	GATE_AUDIO1(CLK_AUD_ASRCO2, "audio_asrco2", "asm_h_sel", 15),
+	GATE_AUDIO1(CLK_AUD_INTDIR, "audio_intdir", "intdir_sel", 20),
+	GATE_AUDIO1(CLK_AUD_A1SYS, "audio_a1sys", "aud_mux1_sel", 21),
+	GATE_AUDIO1(CLK_AUD_A2SYS, "audio_a2sys", "aud_mux2_sel", 22),
+	GATE_AUDIO1(CLK_AUD_AFE_CONN, "audio_afe_conn", "aud_mux1_sel", 23),
+	GATE_AUDIO1(CLK_AUD_AFE_MRGIF, "audio_afe_mrgif", "aud_mux1_sel", 25),
+	/* AUDIO2 */
+	GATE_AUDIO2(CLK_AUD_MMIF_UL1, "audio_ul1", "aud_mux1_sel", 0),
+	GATE_AUDIO2(CLK_AUD_MMIF_UL2, "audio_ul2", "aud_mux1_sel", 1),
+	GATE_AUDIO2(CLK_AUD_MMIF_UL3, "audio_ul3", "aud_mux1_sel", 2),
+	GATE_AUDIO2(CLK_AUD_MMIF_UL4, "audio_ul4", "aud_mux1_sel", 3),
+	GATE_AUDIO2(CLK_AUD_MMIF_UL5, "audio_ul5", "aud_mux1_sel", 4),
+	GATE_AUDIO2(CLK_AUD_MMIF_UL6, "audio_ul6", "aud_mux1_sel", 5),
+	GATE_AUDIO2(CLK_AUD_MMIF_DL1, "audio_dl1", "aud_mux1_sel", 6),
+	GATE_AUDIO2(CLK_AUD_MMIF_DL2, "audio_dl2", "aud_mux1_sel", 7),
+	GATE_AUDIO2(CLK_AUD_MMIF_DL3, "audio_dl3", "aud_mux1_sel", 8),
+	GATE_AUDIO2(CLK_AUD_MMIF_DL4, "audio_dl4", "aud_mux1_sel", 9),
+	GATE_AUDIO2(CLK_AUD_MMIF_DL5, "audio_dl5", "aud_mux1_sel", 10),
+	GATE_AUDIO2(CLK_AUD_MMIF_DL6, "audio_dl6", "aud_mux1_sel", 11),
+	GATE_AUDIO2(CLK_AUD_MMIF_DLMCH, "audio_dlmch", "aud_mux1_sel", 12),
+	GATE_AUDIO2(CLK_AUD_MMIF_ARB1, "audio_arb1", "aud_mux1_sel", 13),
+	GATE_AUDIO2(CLK_AUD_MMIF_AWB1, "audio_awb", "aud_mux1_sel", 14),
+	GATE_AUDIO2(CLK_AUD_MMIF_AWB2, "audio_awb2", "aud_mux1_sel", 15),
+	GATE_AUDIO2(CLK_AUD_MMIF_DAI, "audio_dai", "aud_mux1_sel", 16),
+	/* AUDIO3 */
+	GATE_AUDIO3(CLK_AUD_ASRCI3, "audio_asrci3", "asm_h_sel", 2),
+	GATE_AUDIO3(CLK_AUD_ASRCI4, "audio_asrci4", "asm_h_sel", 3),
+	GATE_AUDIO3(CLK_AUD_ASRCI5, "audio_asrci5", "asm_h_sel", 4),
+	GATE_AUDIO3(CLK_AUD_ASRCI6, "audio_asrci6", "asm_h_sel", 5),
+	GATE_AUDIO3(CLK_AUD_ASRCO3, "audio_asrco3", "asm_h_sel", 6),
+	GATE_AUDIO3(CLK_AUD_ASRCO4, "audio_asrco4", "asm_h_sel", 7),
+	GATE_AUDIO3(CLK_AUD_ASRCO5, "audio_asrco5", "asm_h_sel", 8),
+	GATE_AUDIO3(CLK_AUD_ASRCO6, "audio_asrco6", "asm_h_sel", 9),
+	GATE_AUDIO3(CLK_AUD_MEM_ASRC1, "audio_mem_asrc1", "asm_h_sel", 10),
+	GATE_AUDIO3(CLK_AUD_MEM_ASRC2, "audio_mem_asrc2", "asm_h_sel", 11),
+	GATE_AUDIO3(CLK_AUD_MEM_ASRC3, "audio_mem_asrc3", "asm_h_sel", 12),
+	GATE_AUDIO3(CLK_AUD_MEM_ASRC4, "audio_mem_asrc4", "asm_h_sel", 13),
+	GATE_AUDIO3(CLK_AUD_MEM_ASRC5, "audio_mem_asrc5", "asm_h_sel", 14),
+};
+
+static const struct of_device_id of_match_clk_mt2701_aud[] = {
+	{ .compatible = "mediatek,mt2701-audsys", },
+	{}
+};
+
+static int clk_mt2701_aud_probe(struct platform_device *pdev)
+{
+	struct clk_onecell_data *clk_data;
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *pnode = pdev->dev.parent->of_node;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(CLK_AUD_NR);
+
+	mtk_clk_register_gates(pnode, audio_clks, ARRAY_SIZE(audio_clks),
+			       clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		dev_err(&pdev->dev,
+			"could not register clock provider: %s: %d\n",
+			pdev->name, r);
+
+	return r;
+}
+
+static struct platform_driver clk_mt2701_aud_drv = {
+	.probe = clk_mt2701_aud_probe,
+	.driver = {
+		.name = "clk-mt2701-aud",
+		.of_match_table = of_match_clk_mt2701_aud,
+	},
+};
+
+builtin_platform_driver(clk_mt2701_aud_drv);
-- 
1.9.1

  parent reply	other threads:[~2018-01-31  7:42 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-31  7:42 [PATCH v2 0/5] add MFD support for MediaTek audio subsystem Ryder Lee
2018-01-31  7:42 ` [PATCH v2 1/5] clk: mediatek: update missing clock data for MT7622 audsys Ryder Lee
2018-02-05  6:08   ` Rob Herring
     [not found] ` <cover.1515639336.git.ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2018-01-31  7:42   ` [PATCH v2 2/5] clk: mediatek: modify MT7622 audsys to adapt MFD device Ryder Lee
     [not found]     ` <d6669277f5232446b4798a6b724074b18d5c21aa.1515639336.git.ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2018-02-03 14:26       ` Matthias Brugger
2018-02-05  4:07         ` Ryder Lee
2018-02-07 15:18           ` Matthias Brugger
2018-02-08  5:57             ` Ryder Lee
2018-02-09 13:24               ` Matthias Brugger
2018-01-31  7:42 ` Ryder Lee [this message]
2018-01-31  7:42 ` [PATCH v2 4/5] dt-bindings: clock: mediatek: update audsys documentation " Ryder Lee
2018-02-05  6:08   ` Rob Herring
2018-02-05  9:11     ` Ryder Lee
2018-02-08  0:49       ` Rob Herring
2018-02-08  5:51         ` Ryder Lee
2018-01-31  7:42 ` [PATCH v2 5/5] arm: dts: mediatek: add audio-subsystem node for both MT2701 and MT7623 Ryder Lee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=99afcd2aeb87ad30dd565cb9bf86ee3239142e08.1515639336.git.ryder.lee@mediatek.com \
    --to=ryder.lee@mediatek.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=garlic.tseng@mediatek.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).