devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2019-10-22 16:55:21 to 2019-10-23 15:45:21 UTC [more...]

[PATCH v3 00/21] drm: Add support for bus-format negotiation
 2019-10-23 15:44 UTC  (3+ messages)
` [PATCH v3 01/21] drm/vc4: Declare the DSI encoder as a bridge element
` [PATCH v3 02/21] drm/exynos: Don't reset bridge->next

[PATCH V9 0/6] backlight: qcom-wled: Support for QCOM wled driver
 2019-10-23 15:43 UTC  (8+ messages)
` [PATCH V9 1/6] backlight: qcom-wled: Add new properties for PMI8998
` [PATCH V9 2/6] backlight: qcom-wled: Rename PM8941* to WLED3
` [PATCH V9 3/6] backlight: qcom-wled: Restructure the driver for WLED3
` [PATCH V9 4/6] backlight: qcom-wled: Add support for WLED4 peripheral
` [PATCH V9 5/6] backlight: qcom-wled: add support for short circuit handling
` [PATCH V9 6/6] backlight: qcom-wled: Add auto string detection logic

[PATCH v6 1/2] dt-bindings: edac: arm-dmc520.txt
 2019-10-23 15:37 UTC  (5+ messages)

[PATCH 00/10] Drop even more legacy platform data for omaps
 2019-10-23 15:20 UTC  (3+ messages)
` [PATCH 07/10] ARM: OMAP2+: Drop legacy platform data for dra7 rng

[PATCH 0/2] leds: add generic LED level meter driver
 2019-10-23 14:56 UTC  (5+ messages)
` [PATCH 2/2] leds: meter: add leds-meter binding

[PATCH v6 0/2] Amazon's Annapurna Labs POS Driver
 2019-10-23 14:55 UTC  (4+ messages)
` [PATCH v6 2/2] soc: amazon: al-pos-edac: Introduce Amazon's Annapurna Labs POS EDAC driver

[PATCH 1/2] configs: ARM: omap2plus: Enable OMAP3_THERMAL
 2019-10-23 14:36 UTC  (6+ messages)

[PATCH 0/5] ARM: qcom: add defconfig items and dts nodes
 2019-10-23 13:51 UTC  (8+ messages)
` [PATCH 2/5] ARM: qcom_defconfig: add msm8974 interconnect support
` [PATCH 5/5] ARM: dts: qcom: msm8974: add interconnect nodes

[PATCH RFC 0/2] irqchip/gic: Allow the use of SGI interrupts
 2019-10-23 13:22 UTC  (4+ messages)
` [PATCH RFC 1/2] dt-bindings: Define interrupt type for "
` [PATCH RFC 2/2] irqchip/gic: Allow the use of "

[PATCH v2 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support
 2019-10-23 13:00 UTC  (6+ messages)
` [PATCH v2 1/3] phy: cadence: Sierra: add phy_reset hook
` [PATCH v2 2/3] dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
` [PATCH v2 3/3] phy: ti: j721e-wiz: Manage typec-gpio-dir

[PATCH v2 00/14] PHY: Add support for SERDES in TI's J721E SoC
 2019-10-23 12:57 UTC  (15+ messages)
` [PATCH v2 01/14] dt-bindings: phy: Sierra: Add bindings for Sierra in TI's J721E
` [PATCH v2 02/14] phy: cadence: Sierra: Make "phy_clk" and "sierra_apb" optional resources
` [PATCH v2 03/14] phy: cadence: Sierra: Use "regmap" for read and write to Sierra registers
` [PATCH v2 04/14] phy: cadence: Sierra: Add support for SERDES_16G used in J721E SoC
` [PATCH v2 05/14] phy: cadence: Sierra: Make cdns_sierra_phy_init() as phy_ops
` [PATCH v2 06/14] phy: cadence: Sierra: Modify register macro names to be in sync with Sierra user guide
` [PATCH v2 07/14] phy: cadence: Sierra: Configure both lane cdb and common cdb registers for external SSC
` [PATCH v2 08/14] phy: cadence: Sierra: Get reset control "array" for each link
` [PATCH v2 09/14] phy: cadence: Sierra: Check for PLL lock during PHY power on
` [PATCH v2 10/14] phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
` [PATCH v2 11/14] phy: cadence: Sierra: Set cmn_refclk/cmn_refclk1 frequency to 25MHz
` [PATCH v2 12/14] phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove()
` [PATCH v2 13/14] dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
` [PATCH v2 14/14] phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC

[PATCH v6 3/9] i2c: add support for filters optional properties
 2019-10-23 12:40 UTC 

[PATCH v2 00/11] arm64: renesas: Add r8a77961 support
 2019-10-23 12:33 UTC  (12+ messages)
` [PATCH v2 01/11] soc: renesas: Rename SYSC_R8A7796 to SYSC_R8A77960
` [PATCH v2 02/11] soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W
` [PATCH v2 03/11] soc: renesas: Add ARCH_R8A77961 for new R-Car M3-W+
` [PATCH v2 04/11] soc: renesas: Identify "
` [PATCH v2 05/11] soc: renesas: rcar-rst: Add R8A77961 support
` [PATCH v2 06/11] soc: renesas: rcar-sysc: "
` [PATCH v2 07/11] arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960
` [PATCH v2 08/11] arm64: dts: renesas: Add Renesas R8A77961 SoC support
` [PATCH v2 09/11] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+
` [PATCH v2 10/11] arm64: defconfig: Enable R8A77961 SoC
` [PATCH/LOCAL v2 11/11] arm64: renesas_defconfig: "

[PATCH 0/5] arm64: zynqmp: add firmware device tree node
 2019-10-23 12:30 UTC  (4+ messages)
` [PATCH 5/5] arm64: zynqmp: Add data cells to access efuse

[PATCH v2] dt-bindings: serial: sh-sci: Document r8a77961 bindings
 2019-10-23 12:30 UTC 

[PATCH v2 0/3] pinctrl: sh-pfc: Add r8a77961 support
 2019-10-23 12:29 UTC  (4+ messages)
` [PATCH v2 1/3] dt-bindings: pinctrl: sh-pfc: Document "
` [PATCH v2 2/3] pinctrl: sh-pfc: Rename PINCTRL_PFC_R8A7796 to PINCTRL_PFC_R8A77960
` [PATCH v2 3/3] pinctrl: sh-pfc: r8a7796: Add R8A77961 PFC support

[PATCH v2 0/4] clk: renesas: Add r8a77961 support
 2019-10-23 12:29 UTC  (5+ messages)
` [PATCH v2 1/4] dt-bindings: clock: renesas: cpg-mssr: Document "
` [PATCH v2 2/4] dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
` [PATCH v2 3/4] clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960
` [PATCH v2 4/4] clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support

[PATCH v2 0/5] dt-bindings: arm: renesas: Add core r8a77961 support
 2019-10-23 12:29 UTC  (6+ messages)
` [PATCH v2 1/5] dt-bindings: arm: renesas: Document R-Car M3-W+ SoC DT bindings
` [PATCH v2 2/5] dt-bindings: arm: renesas: Add Salvator-XS board with R-Car M3-W+
` [PATCH v2 3/5] dt-bindings: reset: rcar-rst: Document r8a77961 support
` [PATCH v2 4/5] dt-bindings: power: rcar-sysc: "
` [PATCH v2 5/5] dt-bindings: power: Add r8a77961 SYSC power domain definitions

[PATCH v10 00/14] TVP5150 features and fixes
 2019-10-23 12:21 UTC  (4+ messages)
` [PATCH v10 03/14] media: v4l2-fwnode: add initial connector parsing support

[PATCH v5 0/9] i2c: add support for filters
 2019-10-23 12:19 UTC  (6+ messages)

[PATCH v3 00/11] Add device tree support for sc7180
 2019-10-23 12:16 UTC  (13+ messages)
` [PATCH v3 01/11] dt-bindings: qcom: Add SC7180 bindings
` [PATCH v3 02/11] arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc
` [PATCH v3 03/11] dt-bindings: arm-smmu: update binding for qcom sc7180 SoC
` [PATCH v3 04/11] arm64: dts: sc7180: Add device node for apps_smmu
` [PATCH v3 05/11] arm64: dts: qcom: sc7180: Add cmd_db reserved area
` [PATCH v3 06/11] arm64: dts: qcom: sc7180: Add rpmh-rsc node
` [PATCH v3 07/11] arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device
` [PATCH v3 08/11] arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
` [PATCH v3 09/11] arm64: dts: qcom: sc7180-idp: Add RPMh regulators
` [PATCH v3 10/11] arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver
` [PATCH v3 11/11] arm64: dts: qcom: sc7180: Add pdc interrupt controller

[PATCH v5 1/4] PM / OPP: Support adjusting OPP voltages at runtime
 2019-10-23 11:20 UTC  (6+ messages)
    ` [PATCH v5 3/4] soc: samsung: Add Exynos Adaptive Supply Voltage driver

[PATCH 1/3] usb: usb251xb: Drop some unused defines
 2019-10-23 10:52 UTC  (3+ messages)
` [PATCH 2/3] usb: usb251xb: Document chip variant usb2422
` [PATCH 3/3] usb: usb251xb: Add support for USB2422

[PATCH v4 5/5] media: platform: Add jpeg dec/enc feature
 2019-10-23 10:39 UTC 

[RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
 2019-10-23 10:27 UTC  (6+ messages)
        ` [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver

[PATCH v2 00/11] arm64: Realtek RTD1295 reset controllers
 2019-10-23 10:13 UTC  (9+ messages)
` [PATCH v2 01/11] dt-bindings: reset: Add Realtek RTD1295
` [PATCH v2 02/11] dt-bindings: reset: Add Realtek RTD1195
` [PATCH v2 06/11] arm64: dts: realtek: Add RTD129x reset controller nodes
` [PATCH v2 07/11] arm64: dts: realtek: Add RTD129x UART resets
` [PATCH v2 08/11] ARM: dts: rtd1195: Add reset nodes
` [PATCH v2 09/11] ARM: dts: rtd1195: Add UART resets
` [PATCH v2 10/11] arm64: dts: realtek: Adopt RTD129x reset constants
` [PATCH v2 11/11] ARM: dts: rtd1195: Adopt "

[PATCH 0/1] openrisc: LiteX+mor1kx platform
 2019-10-23  9:54 UTC  (2+ messages)
` [PATCH 1/1] openrisc: add support for LiteX

[PATCH v9 1/3] PM: wakeup: Add routine to help fetch wakeup source object
 2019-10-23  9:52 UTC  (7+ messages)
` [PATCH v9 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define
` [PATCH v9 3/3] soc: fsl: add RCPM driver

[PATCH v2 0/4] LiteUART serial driver
 2019-10-23  9:47 UTC  (5+ messages)
` [PATCH v2 1/4] dt-bindings: vendor: add vendor prefix for LiteX
` [PATCH v2 2/4] litex: add common LiteX header
` [PATCH v2 3/4] dt-bindings: serial: document LiteUART bindings
` [PATCH v2 4/4] drivers/tty/serial: add LiteUART driver

[PATCH RESEND 2] dt-bindings: max77693: fix missing curly brace
 2019-10-23  9:34 UTC 

[PATCH 0/8] Add support for Azoteq IQS620A/621/622/624/625
 2019-10-23  9:30 UTC  (26+ messages)
` [PATCH 1/8] dt-bindings: mfd: iqs62x: Add bindings
` [PATCH 3/8] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
` [PATCH 4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor
` [PATCH 5/8] pwm: Add support for Azoteq IQS620A PWM generator
` [PATCH 6/8] iio: light: Add support for Azoteq IQS621 ambient light sensor
` [PATCH 7/8] iio: proximity: Add support for Azoteq IQS622 proximity sensor

[PATCH RESEND] dt-bindings: max77693: fix missing curly brace
 2019-10-23  9:21 UTC 

[PATCH v2] dt-bindings: ata: sata_rcar: Add r8a774b1 support
 2019-10-23  9:15 UTC 

[PATCH 0/2] Add SATA support to RZ/G2N
 2019-10-23  9:08 UTC  (6+ messages)
` [PATCH 1/2] ata: sata_rcar: Add r8a774b1 support
` [PATCH 2/2] arm64: dts: renesas: r8a774b1: Add SATA controller node

[PATCH v5.1 RESEND] dt-bindings: hwrng: Add Samsung Exynos 5250+ True RNG bindings
 2019-10-23  8:44 UTC  (4+ messages)

[PATCH v4] arm64: dts: imx8mq: Init rates and parents configs for clocks
 2019-10-23  8:38 UTC  (3+ messages)

[PATCH] dt-bindings: usb: renesas: usb3-peri: convert bindings to json-schema
 2019-10-23  8:20 UTC 

[PATCH] dt-bindings: usb: renesas_usbhs: convert bindings to json-schema
 2019-10-23  8:20 UTC 

[PATCH 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support
 2019-10-23  8:10 UTC  (7+ messages)
` [PATCH 1/3] phy: cadence: Sierra: add phy_reset hook
` [PATCH 3/3] phy: ti: j721e-wiz: Manage typec-gpio-dir

[PATCH v2 1/3] dt-bindings: power: Convert Generic Power Domain bindings to json-schema
 2019-10-23  7:42 UTC  (3+ messages)

DMA: JZ4780: Add DMA driver for X1000
 2019-10-23  7:05 UTC  (8+ messages)
` [PATCH 1/2] dt-bindings: DMA: Add X1000 bindings
` [PATCH 2/2] DMA: JZ4780: Add support for the X1000
` dmaengine: JZ4780: Add dmaengine driver for X1000
  ` [PATCH RESEND 1/2] dt-bindings: dmaengine: Add X1000 bindings
  ` [PATCH RESEND 2/2] dmaengine: JZ4780: Add support for the X1000

[PATCH] media: dt-bindings: media: Fixup Allwinner A10 CSI binding
 2019-10-23  6:51 UTC  (8+ messages)

[PATCH 1/2] arm64: dts: imx8mm: Remove duplicated machine compatible
 2019-10-23  6:48 UTC  (4+ messages)
` [PATCH 2/2] arm64: dts: imx8mn: "

[PATCH v2 01/11] dt-bindings: phy-mtk-tphy: add two optional properties for u2phy
 2019-10-23  5:40 UTC  (4+ messages)
` [PATCH v2 04/11] dt-bindings: phy-mtk-tphy: add a new reference clock

[PATCH v2 2/2] dt-bindings: iio: adc: Add DT docs for AD7292
 2019-10-23  3:43 UTC  (5+ messages)

[PATCH v3 2/2] HID: google: Add of_match table to Whiskers switch device
 2019-10-23  2:44 UTC 

[PATCH v3 1/2] dt-bindings: input: Add DT bindings for Whiskers switch
 2019-10-23  2:43 UTC 

[PATCH v3 0/2] HID: google: add device tree bindings for
 2019-10-23  2:41 UTC 

[PATCH V15 1/5] dt-bindings: fsl: scu: add thermal binding
 2019-10-23  2:37 UTC  (4+ messages)

[PATCH v4 0/5] add dsa switch support for ar9331
 2019-10-23  0:58 UTC  (7+ messages)
` [PATCH v4 2/5] dt-bindings: net: dsa: qca,ar9331 switch documentation
` [PATCH v4 4/5] net: dsa: add support for Atheros AR9331 TAG format
` [PATCH v4 5/5] net: dsa: add support for Atheros AR9331 build-in switch

[PATCH v2 2/2] HID: google: Add of_match table to Whiskers switch device
 2019-10-23  0:30 UTC  (2+ messages)

[PATCH v2 1/2] dt-bindings: input: Add DT bindings for Whiskers switch
 2019-10-23  0:29 UTC  (2+ messages)

[PATCH] ARM: dts: bcm: HR2: add label to sp805 watchdog
 2019-10-22 22:19 UTC 

[PATCH] arm64: dts: imx8mq-evk: Add remote control
 2019-10-22 19:20 UTC 

[PATCH i2c-next 0/2] i2c: aspeed: Add H/W timeout support
 2019-10-22 17:44 UTC  (8+ messages)
` [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware "

[PATCH v2] dt-bindings: iommu: Convert Arm SMMUv3 to DT schema
 2019-10-22 17:09 UTC  (3+ messages)

[PATCH -next 0/6] dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support
 2019-10-22 17:00 UTC  (7+ messages)
` [PATCH -next 1/6] dt-bindings: dmaengine: xilinx_dma: Remove axidma multichannel support
` [PATCH -next 2/6] dt-bindings: dmaengine: xilinx_dma: Fix formatting and style
` [PATCH -next 3/6] dt-bindings: dmaengine: xilinx_dma: Add binding for Xilinx MCDMA IP
` [PATCH -next 4/6] dmaengine: xilinx_dma: Remove axidma multichannel mode support
` [PATCH -next 5/6] dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handle
` [PATCH -next 6/6] dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support

clk: X1000: Add support for the X1000
 2019-10-22 16:56 UTC  (4+ messages)
` clk: X1000: Add support for the X1000 v2
  ` [PATCH 1/2 v2] dt-bindings: clock: Add X1000 bindings
  ` [PATCH 2/2 v2] clk: Ingenic: Add CGU driver for X1000

[Patch 1/3] ARM: dts: am43xx: add support for clkout1 clock
 2019-10-22 16:55 UTC  (4+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).