messages from 2019-11-28 09:29:09 to 2019-11-29 12:46:31 UTC [more...]
[PATCH v2 0/5] DA9062 PMIC features
2019-11-29 12:46 UTC (18+ messages)
` [PATCH v2 1/5] gpio: add support to get local gpio number
` [PATCH v2 3/5] regulator: da9062: add voltage selection gpio support
` [PATCH v2 4/5] dt-bindings: mfd: da9062: add regulator gpio enable/disable documentation
` [PATCH v2 5/5] regulator: da9062: add gpio based regulator dis-/enable support
[PATCH v5 00/16] Support ROHM BD71828 PMIC
2019-11-29 12:09 UTC (9+ messages)
` [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
[PATCH v3 00/10] clk: clk-wizard: clock-wizard: Driver updates
2019-11-29 12:07 UTC (4+ messages)
` [PATCH v3 08/10] clk: clock-wizard: Make the output names unique
[PATCH v5 00/14] CoreSight CTI Driver
2019-11-29 12:06 UTC (14+ messages)
` [PATCH v5 01/14] coresight: cti: Initial "
` [PATCH v5 03/14] coresight: cti: Add sysfs access to program function regs
` [PATCH v5 05/14] dt-bindings: arm: Adds CoreSight CTI hardware definitions
` [PATCH v5 06/14] coresight: cti: Add device tree support for v8 arch CTI
[PATCH v6 0/7] add thermal sensor driver for A64, A83T, H3, H5, H6, R40
2019-11-29 11:46 UTC (19+ messages)
` [PATCH v6 1/7] thermal: sun8i: add thermal driver for H6/H5/H3/A64/A83T/R40
` [PATCH v6 2/7] dt-bindings: thermal: add YAML schema for sun8i-thermal driver bindings
[PATCH v2 0/3] arm64: dts: allwinner: a64: olinuxino: Update regulators
2019-11-29 11:39 UTC (4+ messages)
` [PATCH v2 1/3] arm64: dts: allwinner: a64: olinuxino: Fix eMMC supply regulator
` [PATCH v2 2/3] arm64: dts: allwinner: a64: olinuxino: Add bank supply regulators
` [PATCH v2 3/3] arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulator
[PATCH v5 0/3] MediaTek Security random number generator support
2019-11-29 11:30 UTC (6+ messages)
` [PATCH v5 3/3] hwrng: add mtk-sec-rng driver
clk: Ingenic: Add support for the X1830 and add USB clk for X1000
2019-11-29 11:23 UTC (5+ messages)
` [PATCH 1/5] clk: Ingenic: Adjust code to make it compatible with X1830
Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v6
2019-11-29 11:15 UTC (12+ messages)
` [PATCH v6 01/12] MIPS: Ingenic: Initial X1000 support
` [PATCH v6 02/12] dt-bindings: Document yna vendor-prefix
` [PATCH v6 03/12] dt-bindings: MIPS: Add Ingenic XBurst based boards
` [PATCH v6 04/12] MIPS: Ingenic: Initial YSH & ATIL CU Neo board support
` [PATCH v6 05/12] MIPS: X1000: Add pdma controller DT node
` [PATCH v6 06/12] MIPS: CU1000: Update defconfig for pdma controller
` [PATCH v6 07/12] MIPS: X1000: Add msc controller DT node
` [PATCH v6 08/12] MIPS: CU1000: Update defconfig for msc controller
` [PATCH v6 09/12] MIPS: X1000: Add rtc DT node
` [PATCH v6 10/12] MIPS: CU1000: Update defconfig for rtc
[PATCH 1/3] arm64: dts: allwinner: a64: olinuxino: Fix eMMC supply regulator
2019-11-29 9:49 UTC (5+ messages)
` [linux-sunxi] "
` [PATCH 2/3] arm64: dts: allwinner: a64: olinuxino: Add bank supply regulators
` [PATCH 3/3] arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulator
[PATCH v4 0/5] LogiCVC mfd and GPIO support
2019-11-29 9:24 UTC (7+ messages)
` [PATCH v4 1/5] dt-bindings: Add Xylon vendor prefix
` [PATCH v4 2/5] dt-bindings: mfd: Document the Xylon LogiCVC multi-function device
` [PATCH v4 3/5] gpio: syscon: Add support for a custom get operation
` [PATCH v4 4/5] dt-bindings: gpio: Document the Xylon LogiCVC GPIO controller
` [PATCH v4 5/5] gpio: syscon: Add support for the Xylon LogiCVC GPIOs
[v6,1/3] dt-bindings: i2c: support property idle-state
2019-11-29 9:22 UTC (3+ messages)
` [v6,2/3] i2c: mux: pca954x: "
` [v6,3/3] arm64: dts: fsl-ls208xa-rdb: fix an errata E-00013
[PATCH v3 0/6] GPIO & Hierarchy IRQ support for HiFive Unleashed
2019-11-29 9:12 UTC (7+ messages)
` [PATCH v3 4/6] gpio: sifive: Add DT documentation for SiFive GPIO
` [PATCH v3 5/6] gpio: sifive: Add GPIO driver for SiFive SoCs
[PATCH v2 0/3] Add DA9062 GPIO support
2019-11-29 9:07 UTC (10+ messages)
` [PATCH v2 2/3] mfd: da9062: add support for the DA9062 GPIOs in the core
` [PATCH v2 3/3] pinctrl: da9062: add driver support
[PATCH 0/4] at24: move write-protect pin handling to nvmem core
2019-11-29 8:47 UTC (9+ messages)
` [PATCH 1/4] dt-bindings: nvmem: new optional property write-protect-gpios
[RFC 0/6] mmc: Add clock scaling support for mmc driver
2019-11-29 8:10 UTC (5+ messages)
[PATCH 0/3] Add support for DLH pressure sensors
2019-11-29 7:34 UTC (5+ messages)
` [PATCH v2 "
` [PATCH v2 1/3] iio: pressure: Add driver "
` [PATCH v2 2/3] dt-bindings: Add asc vendor
` [PATCH v2 3/3] bindings: iio: pressure: Add dlh-i2c documentation
[RFC PATCH 0/1] arm64: dts: added basic DTS for qmx8 congatec board
2019-11-29 7:56 UTC (6+ messages)
` [RFC PATCH 1/1] "
Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v4
2019-11-29 7:48 UTC (6+ messages)
` [PATCH v4 4/6] MIPS: Ingenic: Initial YSH & ATIL CU Neo board support
[PATCH 1/1] arm64: dts: allwinner: a64: olinuxino: Add VCC-PG supply
2019-11-29 7:34 UTC (6+ messages)
[PATCH v1] drm/msm: add support for 2.4.1 DSI version for sc7180 soc
2019-11-29 7:05 UTC
[PATCH v1 0/2] Add suppport for rm69299 Visionox panel driver and add devicetree bindings for visionox panel
2019-11-29 6:55 UTC (3+ messages)
` [PATCH v1 1/2] dt-bindings: display: add sc7180 panel variant
` [PATCH v1 2/2] drm/panel: add support for rm69299 visionox panel driver
[PATCH v1] memory: mtk-smi: Add bandwidth initial setting for MT6779
2019-11-29 6:43 UTC (4+ messages)
` [PATCH v1 2/2] memory: mtk-smi: Add bandwidth initial golden "
[ v1] hwmon: (pmbus) Add Wistron power supply pmbus driver
2019-11-29 6:02 UTC
[PATCH v7 0/5] PM / devfreq: Add dynamic scaling for imx8m ddr controller
2019-11-29 5:33 UTC (4+ messages)
` [PATCH v7 5/5] arm64: dts: imx8m: Add ddr controller nodes
[PATCH v2 0/2] clk: aspeed: Expose RMII RCLK gate for MACs 1-2 on AST2500
2019-11-29 1:22 UTC (4+ messages)
` [PATCH v2 2/2] clk: aspeed: Add RMII RCLK gates for both AST2500 MACs
[PATCH v2 0/2] reset: Add ast2600 support
2019-11-29 0:08 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: mfd: Add ast2600 to ASPEED LPC
` [PATCH v2 2/2] reset: simple: Add AST2600 compatibility string
[PATCH v3 0/1] Add USB related nodes for SC7180
2019-11-28 22:11 UTC (4+ messages)
` [PATCH v3 1/1] arm64: dts: qcom: sc7180: Add USB related nodes
[PATCH v2 0/4] regulator da9062: support setting buck modes
2019-11-28 20:30 UTC (4+ messages)
` [PATCH v2 4/4] ARM: dts: phycore-imx6: set buck regulator modes explicitly
[PATCH v1 00/29] Introduce memory interconnect for NVIDIA Tegra SoCs
2019-11-28 20:06 UTC (7+ messages)
` [PATCH v1 08/29] dt-bindings: interconnect: tegra: Add initial IDs
[PATCH v4 1/2] dt-bindings: arm: Add Google Coral Edge TPU entry
2019-11-28 19:48 UTC (2+ messages)
` [PATCH v4 2/2] arm64: dts: freescale: add initial support for Google i.MX 8MQ Phanbell
[PATCH] arm64: dts: imx8mq: increase NOC clock to 800 MHz
2019-11-28 19:43 UTC (2+ messages)
[PATCH] arm64: dts: allwinner: Convert to new-style SPDX license identifiers
2019-11-28 18:12 UTC (3+ messages)
[PATCH v11 0/7] drm/sun4i: Allwinner A64 MIPI-DSI support
2019-11-28 17:51 UTC (11+ messages)
` [PATCH v11 4/7] drm/sun4i: dsi: Handle bus clock explicitly
[PATCH 1/2] dt-bindings: display: DT schema for rocktech,rk101ii01d-ct panel
2019-11-28 17:23 UTC (2+ messages)
[PATCH] ARM: dts: colibri-imx6ull: correct wrong pinmuxing and add comments
2019-11-28 17:14 UTC
[PATCH] arm64: dts: juno: Fix DMA address translations by adding SOC bus node
2019-11-28 16:40 UTC (8+ messages)
` [PATCH] Revert "arm64: dts: juno: add dma-ranges property"
[PATCH 1/2] arm64: dts: imx8mq: add missing SAI nodes
2019-11-28 16:35 UTC (5+ messages)
` [PATCH 2/2] arm64: dts: zii-ultra: add sound support
[PATCH] dt-bindings: stm32: convert mlahb to json-schema
2019-11-28 15:46 UTC
[PATCH 0/3] drivers/auxdisplay: Provide support for JHD1313
2019-11-28 14:37 UTC (8+ messages)
` [PATCH 1/3] dt-bindings: vendor: Add JHD LCD vendor
` [PATCH 2/3] dt-bindings: auxdisplay: Add JHD1313 bindings
` [PATCH 3/3] drivers: auxdisplay: Add JHD1313 I2C interface driver
[PATCH 1/1] mmc: mmci: add threaded irq to abort DPSM of non-functional state
2019-11-28 14:06 UTC (4+ messages)
` [Linux-stm32] "
[PATCH 2/2] dt-bindings: connector: Improve the english of the initial description
2019-11-28 13:43 UTC
[PATCH v2 00/11] Move PMC clocks into Tegra PMC driver
2019-11-28 13:25 UTC (17+ messages)
` [PATCH v2 02/11] soc: tegra: Add Tegra PMC clock registrations into "
` [PATCH v2 04/11] soc: pmc: Add blink output clock registration to Tegra PMC
` [PATCH v2 06/11] dt-bindings: clock: tegra: Remove pmc clock ids from clock dt-bindings
[PATCH] powerpc/devicetrees: Change 'gpios' to 'cs-gpios' on fsl,spi nodes
2019-11-28 12:21 UTC (2+ messages)
[PATCH 0/2] USB DWC2 support for STM32MP15 SoCs USB OTG
2019-11-28 12:14 UTC (3+ messages)
` [PATCH 2/2] usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS
[PATCH v7 net-next 00/13] net: ethernet: ti: introduce new cpsw switchdev based driver
2019-11-28 11:55 UTC (4+ messages)
` [PATCH v7 net-next 06/13] dt-bindings: net: ti: add new cpsw switch driver bindings
[PATCH 0/2] iommu: Support reserved-memory regions
2019-11-28 11:43 UTC (9+ messages)
` [PATCH 2/2] iommu: dma: Use of_iommu_get_resv_regions()
[PATCH v2 0/3] Add USB DWC3 support for SC7180
2019-11-28 11:33 UTC (4+ messages)
` [PATCH v2 1/3] usb: dwc3: Add support for SC7180 SOC
` [PATCH v2 2/3] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
` [PATCH v2 3/3] dt-bindings: usb: qcom,dwc3: Add compatible for SC7180
[PATCH v6 00/17] dmaengine/soc: Add Texas Instruments UDMA support
2019-11-28 10:59 UTC (18+ messages)
` [PATCH v6 01/17] bindings: soc: ti: add documentation for k3 ringacc
` [PATCH v6 02/17] soc: ti: k3: add navss ringacc driver
` [PATCH v6 03/17] dmaengine: doc: Add sections for per descriptor metadata support
` [PATCH v6 04/17] dmaengine: Add metadata_ops for dma_async_tx_descriptor
` [PATCH v6 05/17] dmaengine: Add support for reporting DMA cached data amount
` [PATCH v6 06/17] dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA
` [PATCH v6 07/17] dmaengine: ti: k3 PSI-L remote endpoint configuration
` [PATCH v6 08/17] dt-bindings: dma: ti: Add document for K3 UDMA
` [PATCH v6 09/17] dmaengine: ti: New driver for K3 UDMA - split#1: defines, structs, io func
` [PATCH v6 10/17] dmaengine: ti: New driver for K3 UDMA - split#2: probe/remove, xlate and filter_fn
` [PATCH v6 11/17] dmaengine: ti: New driver for K3 UDMA - split#3: alloc/free chan_resources
` [PATCH v6 12/17] dmaengine: ti: New driver for K3 UDMA - split#4: dma_device callbacks 1
` [PATCH v6 13/17] dmaengine: ti: New driver for K3 UDMA - split#5: dma_device callbacks 2
` [PATCH v6 14/17] dmaengine: ti: New driver for K3 UDMA - split#6: Kconfig and Makefile
` [PATCH v6 15/17] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
` [PATCH v6 16/17] firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx channel
` [PATCH v6 17/17] dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
[PATCH v3 00/14] PHY: Add support for SERDES in TI's J721E SoC
2019-11-28 10:46 UTC (15+ messages)
` [PATCH v3 01/14] dt-bindings: phy: Sierra: Add bindings for Sierra in TI's J721E
` [PATCH v3 02/14] phy: cadence: Sierra: Make "phy_clk" and "sierra_apb" optional resources
` [PATCH v3 03/14] phy: cadence: Sierra: Use "regmap" for read and write to Sierra registers
` [PATCH v3 04/14] phy: cadence: Sierra: Add support for SERDES_16G used in J721E SoC
` [PATCH v3 05/14] phy: cadence: Sierra: Make cdns_sierra_phy_init() as phy_ops
` [PATCH v3 06/14] phy: cadence: Sierra: Modify register macro names to be in sync with Sierra user guide
` [PATCH v3 07/14] phy: cadence: Sierra: Configure both lane cdb and common cdb registers for external SSC
` [PATCH v3 08/14] phy: cadence: Sierra: Get reset control "array" for each link
` [PATCH v3 09/14] phy: cadence: Sierra: Check for PLL lock during PHY power on
` [PATCH v3 10/14] phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
` [PATCH v3 11/14] phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz
` [PATCH v3 12/14] phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove()
` [PATCH v3 13/14] dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
` [PATCH v3 14/14] phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
[v5,1/3] dt-bindings: i2c: support property idle-state
2019-11-28 10:46 UTC (7+ messages)
` [v5,2/3] i2c: mux: pca954x: "
` [EXT] "
Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v5
2019-11-28 10:37 UTC (11+ messages)
` [PATCH v5 01/10] MIPS: Ingenic: Initial X1000 support
` [PATCH v5 02/10] dt-bindings: Document yna vendor-prefix
` [PATCH v5 03/10] dt-bindings: MIPS: Add Ingenic XBurst based boards
` [PATCH v5 04/10] MIPS: Ingenic: Initial YSH & ATIL CU Neo board support
` [PATCH v5 05/10] MIPS: X1000: Add pdma controller DT node
` [PATCH v5 06/10] MIPS: CU1000: Update defconfig for pdma controller
` [PATCH v5 07/10] MIPS: X1000: Add msc controller DT node
` [PATCH v5 08/10] MIPS: CU1000: Update defconfig for msc controller
` [PATCH v5 09/10] MIPS: X1000: Add rtc DT node
` [PATCH v5 10/10] MIPS: CU1000: Update defconfig for rtc
[RFC 0/2] gpiolib: Initial, basic support for shared GPIO lines
2019-11-28 10:06 UTC (5+ messages)
` [RFC 1/2] dt-bindings: gpio: Document shared GPIO line usage
[PATCH v2 0/1] Add device node support for TSENS in SC7180
2019-11-28 9:54 UTC (2+ messages)
` [PATCH v2 1/1] arm64: dts: qcom: sc7180: "
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).