From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pawel Laszczak Subject: RE: [PATCH v9 2/6] usb:gadget Separated decoding functions from dwc3 driver. Date: Fri, 5 Jul 2019 11:39:57 +0000 Message-ID: References: <1562324238-16655-1-git-send-email-pawell@cadence.com> <1562324238-16655-3-git-send-email-pawell@cadence.com> <20190705112724.GA4294@kroah.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <20190705112724.GA4294@kroah.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Greg KH Cc: "devicetree@vger.kernel.org" , "felipe.balbi@linux.intel.com" , "linux-usb@vger.kernel.org" , "hdegoede@redhat.com" , "heikki.krogerus@linux.intel.com" , "robh+dt@kernel.org" , "rogerq@ti.com" , "linux-kernel@vger.kernel.org" , "jbergsagel@ti.com" , "nsekhar@ti.com" , "nm@ti.com" , Suresh Punnoose , "peter.chen@nxp.com" , Jayshri Dajiram Pawar , Rahul Kumar List-Id: devicetree@vger.kernel.org >On Fri, Jul 05, 2019 at 11:57:14AM +0100, Pawel Laszczak wrote: >> Patch moves some decoding functions from driver/usb/dwc3/debug.h driver >> to driver/usb/gadget/debug.c file. These moved functions include: >> dwc3_decode_get_status >> dwc3_decode_set_clear_feature >> dwc3_decode_set_address >> dwc3_decode_get_set_descriptor >> dwc3_decode_get_configuration >> dwc3_decode_set_configuration >> dwc3_decode_get_intf >> dwc3_decode_set_intf >> dwc3_decode_synch_frame >> dwc3_decode_set_sel >> dwc3_decode_set_isoch_delay >> dwc3_decode_ctrl >> >> These functions are used also in inroduced cdns3 driver. >> >> All functions prefixes were changed from dwc3 to usb. >> Also, function's parameters has been extended according to the name >> of fields in standard SETUP packet. >> Additionally, patch adds usb_decode_ctrl function to >> include/linux/usb/gadget.h file. > >No it does not :( I've forgot about this :(=20 It should be include/linux/usb/ch.9.h > >> Signed-off-by: Pawel Laszczak >> --- >> drivers/usb/common/Makefile | 5 + >> drivers/usb/common/debug.c | 268 ++++++++++++++++++++++++++++++++++++ >> drivers/usb/dwc3/debug.h | 252 --------------------------------- >> drivers/usb/dwc3/trace.h | 2 +- >> include/linux/usb/ch9.h | 25 ++++ >> 5 files changed, 299 insertions(+), 253 deletions(-) >> create mode 100644 drivers/usb/common/debug.c >> >> diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile >> index 0a7c45e85481..cdc66b59a6f0 100644 >> --- a/drivers/usb/common/Makefile >> +++ b/drivers/usb/common/Makefile >> @@ -5,6 +5,11 @@ >> >> obj-$(CONFIG_USB_COMMON) +=3D usb-common.o >> usb-common-y +=3D common.o >> + >> +ifneq ($(CONFIG_TRACING),) >> + usb-common-y +=3D debug.o >> +endif > >So only enable this if tracing is not emabled? Or if enabled? I'm >confused, isn't there an easier way to write this? It's checks if CONFIG_TRACING is enable.=20 It's a common way checking if option is enabled in usb subsystem.=20 > >thanks, > >greg k-h