devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/6] Ingenic JZ47xx TCU drivers
@ 2017-12-29 12:59 Paul Cercueil
  2017-12-29 12:59 ` [PATCH 1/6] mfd: syscon: Add ingenic-tcu.h header Paul Cercueil
                   ` (5 more replies)
  0 siblings, 6 replies; 80+ messages in thread
From: Paul Cercueil @ 2017-12-29 12:59 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA

Hi,

This patch set introduces three new drivers, which together control the
TCU (Timer/Counter Unit) of Ingenic JZ47xx SoCs.

The ingenic-tcu-intc driver will demultiplex the TCU IRQ interrupts; the 
ingenic-tcu-clocks driver will handle the TCU clocks (enable/disable,
reparenting, reclocking); and the ingenic-tcu driver provides a
clocksource and timers to the system.

The purpose of this patch series is to eventually completely remove the
non-standard platform and board code that handles timers for the Ingenic
SoCs. Before this can be achieved, the watchdog and PWM drivers (already
upstream) will be modified to use the same regmap as the rest of the TCU
drivers.

Thanks,
-Paul

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* [PATCH 1/6] mfd: syscon: Add ingenic-tcu.h header
  2017-12-29 12:59 [PATCH 0/6] Ingenic JZ47xx TCU drivers Paul Cercueil
@ 2017-12-29 12:59 ` Paul Cercueil
  2018-01-01 14:33   ` [PATCH v2 " Paul Cercueil
  2017-12-29 12:59 ` [PATCH 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
                   ` (4 subsequent siblings)
  5 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2017-12-29 12:59 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, linux-kernel, devicetree, Paul Cercueil

This header contains macros for the registers that are present in the
regmap shared by all the drivers related to the TCU (Timer Counter Unit)
of the Ingenic JZ47xx SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 include/linux/mfd/syscon/ingenic-tcu.h | 53 ++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 include/linux/mfd/syscon/ingenic-tcu.h

diff --git a/include/linux/mfd/syscon/ingenic-tcu.h b/include/linux/mfd/syscon/ingenic-tcu.h
new file mode 100644
index 000000000000..5952fdd60005
--- /dev/null
+++ b/include/linux/mfd/syscon/ingenic-tcu.h
@@ -0,0 +1,53 @@
+#ifndef __LINUX_CLK_INGENIC_TCU_H_
+#define __LINUX_CLK_INGENIC_TCU_H_
+
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+
+enum ingenic_tcu_reg {
+	REG_WDT_TDR	= 0x00,
+	REG_WDT_TCER	= 0x04,
+	REG_WDT_TCNT	= 0x08,
+	REG_WDT_TCSR	= 0x0c,
+	REG_TER		= 0x10,
+	REG_TESR	= 0x14,
+	REG_TECR	= 0x18,
+	REG_TSR		= 0x1c,
+	REG_TFR		= 0x20,
+	REG_TFSR	= 0x24,
+	REG_TFCR	= 0x28,
+	REG_TSSR	= 0x2c,
+	REG_TMR		= 0x30,
+	REG_TMSR	= 0x34,
+	REG_TMCR	= 0x38,
+	REG_TSCR	= 0x3c,
+	REG_TDFR0	= 0x40,
+	REG_TDHR0	= 0x44,
+	REG_TCNT0	= 0x48,
+	REG_TCSR0	= 0x4c,
+	REG_OST_DR	= 0xe0,
+	REG_OST_CNTL	= 0xe4,
+	REG_OST_CNTH	= 0xe8,
+	REG_OST_TCSR	= 0xec,
+	REG_TSTR	= 0xf0,
+	REG_TSTSR	= 0xf4,
+	REG_TSTCR	= 0xf8,
+	REG_OST_CNTHBUF	= 0xfc,
+};
+
+#define TCSR_RESERVED_BITS		0x3f
+#define TCSR_PARENT_CLOCK_MASK		0x07
+#define TCSR_PRESCALE_LSB		3
+#define TCSR_PRESCALE_MASK		0x38
+
+#define TCSR_PWM_SD		BIT(9)  /* 0: Shutdown abruptly 1: gracefully */
+#define TCSR_PWM_INITL_HIGH	BIT(8)  /* Sets the initial output level */
+#define TCSR_PWM_EN		BIT(7)  /* PWM pin output enable */
+
+#define CHANNEL_STRIDE		0x10
+#define REG_TDFRc(c)		(REG_TDFR0 + ((c) * CHANNEL_STRIDE))
+#define REG_TDHRc(c)		(REG_TDHR0 + ((c) * CHANNEL_STRIDE))
+#define REG_TCNTc(c)		(REG_TCNT0 + ((c) * CHANNEL_STRIDE))
+#define REG_TCSRc(c)		(REG_TCSR0 + ((c) * CHANNEL_STRIDE))
+
+#endif /* __LINUX_CLK_INGENIC_TCU_H_ */
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks
  2017-12-29 12:59 [PATCH 0/6] Ingenic JZ47xx TCU drivers Paul Cercueil
  2017-12-29 12:59 ` [PATCH 1/6] mfd: syscon: Add ingenic-tcu.h header Paul Cercueil
@ 2017-12-29 12:59 ` Paul Cercueil
  2017-12-29 12:59 ` [PATCH 3/6] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2017-12-29 12:59 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, linux-kernel, devicetree, Paul Cercueil

This header provides clock numbers for the ingenic,tcu
DT binding.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 include/dt-bindings/clock/ingenic,tcu.h | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 include/dt-bindings/clock/ingenic,tcu.h

diff --git a/include/dt-bindings/clock/ingenic,tcu.h b/include/dt-bindings/clock/ingenic,tcu.h
new file mode 100644
index 000000000000..3d2a6552fcf1
--- /dev/null
+++ b/include/dt-bindings/clock/ingenic,tcu.h
@@ -0,0 +1,22 @@
+/*
+ * This header provides clock numbers for the ingenic,tcu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+#define __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+
+#define JZ4740_CLK_TIMER0	0
+#define JZ4740_CLK_TIMER1	1
+#define JZ4740_CLK_TIMER2	2
+#define JZ4740_CLK_TIMER3	3
+#define JZ4740_CLK_TIMER4	4
+#define JZ4740_CLK_TIMER5	5
+#define JZ4740_CLK_TIMER6	6
+#define JZ4740_CLK_TIMER7	7
+#define JZ4740_CLK_WDT		8
+#define JZ4740_CLK_LAST		JZ4740_CLK_WDT
+
+#define JZ4770_CLK_OST		9
+#define JZ4770_CLK_LAST		JZ4770_CLK_OST
+
+#endif /* __DT_BINDINGS_CLOCK_INGENIC_TCU_H__ */
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH 3/6] irqchip: Add the ingenic-tcu-intc driver
  2017-12-29 12:59 [PATCH 0/6] Ingenic JZ47xx TCU drivers Paul Cercueil
  2017-12-29 12:59 ` [PATCH 1/6] mfd: syscon: Add ingenic-tcu.h header Paul Cercueil
  2017-12-29 12:59 ` [PATCH 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
@ 2017-12-29 12:59 ` Paul Cercueil
  2017-12-29 12:59 ` [PATCH 4/6] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2017-12-29 12:59 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, linux-kernel, devicetree, Paul Cercueil

This simple driver handles the IRQ chip of the TCU
(Timer Counter Unit) of the JZ47xx Ingenic SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/interrupt-controller/ingenic,tcu.txt  |  32 +++++
 drivers/irqchip/Kconfig                            |   5 +
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/irq-ingenic-tcu.c                  | 156 +++++++++++++++++++++
 4 files changed, 194 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
 create mode 100644 drivers/irqchip/irq-ingenic-tcu.c

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
new file mode 100644
index 000000000000..a3e6318f8461
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
@@ -0,0 +1,32 @@
+Ingenic SoCs Timer/Counter Unit Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
+  * ingenic,jz4740-tcu-intc
+  * ingenic,jz4770-tcu-intc
+  * ingenic,jz4780-tcu-intc
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+- interrupt-parent : phandle of the interrupt controller.
+- interrupts : Specifies the interrupt the controller is connected to.
+
+Example:
+
+/ {
+	regmap {
+		compatible = "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu: interrupt-controller {
+			compatible = "ingenic,jz4740-tcu-intc";
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+	};
+};
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index c70476b34a53..d3d0ce7c554a 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -267,6 +267,11 @@ config INGENIC_IRQ
 	depends on MACH_INGENIC
 	default y
 
+config INGENIC_TCU_IRQ
+	bool
+	depends on MACH_INGENIC || COMPILE_TEST
+	default y
+
 config RENESAS_H8300H_INTC
         bool
 	select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index d2df34a54d38..b8070ee21d8a 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_RENESAS_H8300H_INTC)	+= irq-renesas-h8300h.o
 obj-$(CONFIG_RENESAS_H8S_INTC)		+= irq-renesas-h8s.o
 obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
 obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
+obj-$(CONFIG_INGENIC_TCU_IRQ)	+= irq-ingenic-tcu.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
 obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
diff --git a/drivers/irqchip/irq-ingenic-tcu.c b/drivers/irqchip/irq-ingenic-tcu.c
new file mode 100644
index 000000000000..56630349d253
--- /dev/null
+++ b/drivers/irqchip/irq-ingenic-tcu.c
@@ -0,0 +1,156 @@
+/*
+ * JZ4740 SoC TCU IRQ driver
+ *
+ * Copyright (C) 2016 Paul Cercueil <paul@crapouillou.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/syscon/ingenic-tcu.h>
+
+static void ingenic_tcu_intc_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
+	struct irq_domain *domain = irq_desc_get_handler_data(desc);
+	struct irq_chip_generic *gc = irq_get_domain_generic_chip(domain, 0);
+	struct regmap *map = gc->private;
+	uint32_t irq_reg, irq_mask;
+	unsigned int i;
+
+	regmap_read(map, REG_TFR, &irq_reg);
+	regmap_read(map, REG_TMR, &irq_mask);
+
+	chained_irq_enter(irq_chip, desc);
+
+	irq_reg &= ~irq_mask;
+
+	for (i = 0; i < 32; i++) {
+		if (irq_reg & BIT(i))
+			generic_handle_irq(irq_linear_revmap(domain, i));
+	}
+
+	chained_irq_exit(irq_chip, desc);
+}
+
+static void ingenic_tcu_gc_unmask_enable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.ack, mask);
+	regmap_write(map, ct->regs.enable, mask);
+	*ct->mask_cache |= mask;
+	irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.disable, mask);
+	*ct->mask_cache &= ~mask;
+	irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg_and_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.ack, mask);
+	regmap_write(map, ct->regs.disable, mask);
+	irq_gc_unlock(gc);
+}
+
+static int __init ingenic_tcu_intc_of_init(struct device_node *node,
+	struct device_node *parent)
+{
+	struct irq_domain *domain;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	int err, i, num_parent_irqs;
+	unsigned int parent_irqs[3];
+	struct regmap *map;
+
+	num_parent_irqs = of_property_count_elems_of_size(
+			node, "interrupts", 4);
+	if (num_parent_irqs < 0 || num_parent_irqs > ARRAY_SIZE(parent_irqs))
+		return -EINVAL;
+
+	map = syscon_node_to_regmap(node->parent);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops, NULL);
+	if (!domain)
+		return -ENOMEM;
+
+	err = irq_alloc_domain_generic_chips(domain, 32, 1, "TCU",
+			handle_level_irq, 0, IRQ_NOPROBE | IRQ_LEVEL, 0);
+	if (err)
+		goto out_domain_remove;
+
+	gc = irq_get_domain_generic_chip(domain, 0);
+	ct = gc->chip_types;
+
+	gc->wake_enabled = IRQ_MSK(32);
+	gc->private = map;
+
+	ct->regs.disable = REG_TMSR;
+	ct->regs.enable = REG_TMCR;
+	ct->regs.ack = REG_TFCR;
+	ct->chip.irq_unmask = ingenic_tcu_gc_unmask_enable_reg;
+	ct->chip.irq_mask = ingenic_tcu_gc_mask_disable_reg;
+	ct->chip.irq_mask_ack = ingenic_tcu_gc_mask_disable_reg_and_ack;
+	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
+
+	/* Mask all IRQs by default */
+	regmap_write(map, REG_TMSR, IRQ_MSK(32));
+
+	for (i = 0; i < num_parent_irqs; i++) {
+		parent_irqs[i] = irq_of_parse_and_map(node, i);
+		if (!parent_irqs[i]) {
+			err = -EINVAL;
+			goto out_unmap_irqs;
+		}
+
+		irq_set_chained_handler_and_data(parent_irqs[i],
+				ingenic_tcu_intc_cascade, domain);
+	}
+
+	return 0;
+
+out_unmap_irqs:
+	for (; i > 0; i--)
+		irq_dispose_mapping(parent_irqs[i - 1]);
+out_domain_remove:
+	irq_domain_remove(domain);
+	return err;
+}
+IRQCHIP_DECLARE(jz4740_tcu_intc, "ingenic,jz4740-tcu-intc",
+		ingenic_tcu_intc_of_init);
+IRQCHIP_DECLARE(jz4770_tcu_intc, "ingenic,jz4770-tcu-intc",
+		ingenic_tcu_intc_of_init);
+IRQCHIP_DECLARE(jz4780_tcu_intc, "ingenic,jz4780-tcu-intc",
+		ingenic_tcu_intc_of_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH 4/6] clk: ingenic: Add JZ47xx TCU clocks driver
  2017-12-29 12:59 [PATCH 0/6] Ingenic JZ47xx TCU drivers Paul Cercueil
                   ` (2 preceding siblings ...)
  2017-12-29 12:59 ` [PATCH 3/6] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
@ 2017-12-29 12:59 ` Paul Cercueil
  2017-12-29 14:02   ` Paul Cercueil
  2018-01-01 12:47   ` kbuild test robot
  2017-12-29 12:59 ` [PATCH 5/6] clocksource: Add a new timer-ingenic driver Paul Cercueil
  2017-12-29 12:59 ` [PATCH 6/6] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
  5 siblings, 2 replies; 80+ messages in thread
From: Paul Cercueil @ 2017-12-29 12:59 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, linux-kernel, devicetree, Paul Cercueil

The TCU (Timer Counter Unit) of the Ingenic JZ47xx SoCs features 8
channels, each one having its own clock, that can be started and
stopped, reparented, and reclocked.

This driver only modifies the bits of the registers of the TCU that are
related to clocks control. It provides one clock per TCU channel (plus
one for the watchdog and one for the OS timer) that can be used by other
drivers.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/clock/ingenic,tcu-clocks.txt          |  35 +++
 drivers/clk/ingenic/Makefile                       |   2 +-
 drivers/clk/ingenic/tcu.c                          | 341 +++++++++++++++++++++
 3 files changed, 377 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
 create mode 100644 drivers/clk/ingenic/tcu.c

diff --git a/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
new file mode 100644
index 000000000000..ed1468a6aa27
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
@@ -0,0 +1,35 @@
+Ingenic SoC TCU binding
+
+The TCU is the Timer/Counter Unit present in all Ingenic SoCs. It features 8
+channels, each one having its own clock, that can be started and stopped,
+reparented, and reclocked.
+
+Required properties:
+- compatible : One of:
+  * ingenic,jz4740-tcu-clocks,
+  * ingenic,jz4770-tcu-clocks,
+  * ingenic,jz4780-tcu-clocks.
+- clocks : List of phandle & clock specifiers for clocks external to the TCU.
+  The "pclk", "rtc" and "ext" clocks should be provided.
+- clock-names : List of name strings for the external clocks.
+- #clock-cells: Should be 1.
+  Clock consumers specify this argument to identify a clock. The valid values
+  may be found in <dt-bindings/clock/ingenic,tcu.h>.
+
+Example:
+
+/ {
+	regmap {
+		compatible = "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu: clocks {
+			compatible = "ingenic,jz4740-tcu-clocks";
+
+			clocks = <&ext>, <&rtc>, <&pclk>;
+			clock-names = "ext", "rtc", "pclk";
+
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index cd47b0664c2b..e373118a3726 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -1,3 +1,3 @@
-obj-y				+= cgu.o
+obj-y				+= cgu.o tcu.o
 obj-$(CONFIG_MACH_JZ4740)	+= jz4740-cgu.o
 obj-$(CONFIG_MACH_JZ4780)	+= jz4780-cgu.o
diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
new file mode 100644
index 000000000000..a1b189984d17
--- /dev/null
+++ b/drivers/clk/ingenic/tcu.c
@@ -0,0 +1,341 @@
+/*
+ * Ingenic JZ47xx SoC TCU clocks driver
+ *
+ * Copyright (C) 2016 Paul Cercueil <paul@crapouillou.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/ingenic-tcu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+enum ingenic_version {
+	ID_JZ4740,
+	ID_JZ4770,
+	ID_JZ4780,
+};
+
+struct ingenic_tcu {
+	struct device_node *np;
+	struct regmap *map;
+
+	struct clk_onecell_data clocks;
+};
+
+struct ingenic_tcu_clk_info {
+	struct clk_init_data init_data;
+	u8 gate_bit;
+	u8 tcsr_reg;
+};
+
+struct ingenic_tcu_clk {
+	struct clk_hw hw;
+
+	struct ingenic_tcu *tcu;
+	const struct ingenic_tcu_clk_info *info;
+
+	unsigned int idx;
+};
+
+#define to_tcu_clk(_hw) container_of(_hw, struct ingenic_tcu_clk, hw)
+
+static int ingenic_tcu_enable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+	regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
+	return 0;
+}
+
+static void ingenic_tcu_disable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+
+	regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
+}
+
+static int ingenic_tcu_is_enabled(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int value;
+
+	regmap_read(tcu->map, REG_TSR, &value);
+
+	return !(value & BIT(info->gate_bit));
+}
+
+static u8 ingenic_tcu_get_parent(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int val = 0;
+	int ret;
+
+	ret = regmap_read(tcu->map, info->tcsr_reg, &val);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	return (u8) ffs(val & TCSR_PARENT_CLOCK_MASK) - 1;
+}
+
+static int ingenic_tcu_set_parent(struct clk_hw *hw, u8 idx)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	int ret;
+
+	/*
+	 * Our clock provider has the CLK_SET_PARENT_GATE flag set, so we know
+	 * that the clk is in unprepared state. To be able to access TCSR
+	 * we must ungate the clock supply and we gate it again when done.
+	 */
+
+	regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
+
+	ret = regmap_update_bits(tcu->map, info->tcsr_reg,
+			TCSR_PARENT_CLOCK_MASK, BIT(idx));
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static unsigned long ingenic_tcu_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int prescale;
+	int ret;
+
+	ret = regmap_read(tcu->map, info->tcsr_reg, &prescale);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	prescale = (prescale & TCSR_PRESCALE_MASK) >> TCSR_PRESCALE_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long *parent_rate)
+{
+	long rate = (long) *parent_rate;
+	unsigned int shift;
+
+	if (req_rate > rate)
+		return -EINVAL;
+
+	for (shift = 0; shift < 10; shift += 2)
+		if ((rate >> shift) <= req_rate)
+			return rate >> shift;
+
+	return rate >> 10;
+}
+
+static int ingenic_tcu_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	u8 prescale = (ffs(parent_rate / req_rate) / 2) << TCSR_PRESCALE_LSB;
+	int ret;
+
+	/*
+	 * Our clock provider has the CLK_SET_RATE_GATE flag set, so we know
+	 * that the clk is in unprepared state. To be able to access TCSR
+	 * we must ungate the clock supply and we gate it again when done.
+	 */
+
+	regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
+
+	ret = regmap_update_bits(tcu->map, info->tcsr_reg,
+				TCSR_PRESCALE_MASK, prescale);
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static const struct clk_ops ingenic_tcu_clk_ops = {
+	.get_parent	= ingenic_tcu_get_parent,
+	.set_parent	= ingenic_tcu_set_parent,
+
+	.recalc_rate	= ingenic_tcu_recalc_rate,
+	.round_rate	= ingenic_tcu_round_rate,
+	.set_rate	= ingenic_tcu_set_rate,
+
+	.enable		= ingenic_tcu_enable,
+	.disable	= ingenic_tcu_disable,
+	.is_enabled	= ingenic_tcu_is_enabled,
+};
+
+static const char * const ingenic_tcu_timer_parents[] = {
+	"pclk",
+	"rtc",
+	"ext",
+};
+
+static const struct ingenic_tcu_clk_info ingenic_tcu_clk_info[] = {
+#define DEF_TIMER(_name, _gate_bit, _tcsr)				\
+	{								\
+		.init_data = {						\
+			.name = _name,					\
+			.parent_names = ingenic_tcu_timer_parents,	\
+			.num_parents = ARRAY_SIZE(ingenic_tcu_timer_parents),\
+			.ops = &ingenic_tcu_clk_ops,			\
+			.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE,\
+		},							\
+		.gate_bit = _gate_bit,					\
+		.tcsr_reg = _tcsr,					\
+	}
+	[JZ4740_CLK_TIMER0] = DEF_TIMER("timer0", 0, REG_TCSRc(0)),
+	[JZ4740_CLK_TIMER1] = DEF_TIMER("timer1", 1, REG_TCSRc(1)),
+	[JZ4740_CLK_TIMER2] = DEF_TIMER("timer2", 2, REG_TCSRc(2)),
+	[JZ4740_CLK_TIMER3] = DEF_TIMER("timer3", 3, REG_TCSRc(3)),
+	[JZ4740_CLK_TIMER4] = DEF_TIMER("timer4", 4, REG_TCSRc(4)),
+	[JZ4740_CLK_TIMER5] = DEF_TIMER("timer5", 5, REG_TCSRc(5)),
+	[JZ4740_CLK_TIMER6] = DEF_TIMER("timer6", 6, REG_TCSRc(6)),
+	[JZ4740_CLK_TIMER7] = DEF_TIMER("timer7", 7, REG_TCSRc(7)),
+	[JZ4740_CLK_WDT]    = DEF_TIMER("wdt",   16, REG_WDT_TCSR),
+	[JZ4770_CLK_OST]    = DEF_TIMER("ost",   15, REG_OST_TCSR),
+#undef DEF_TIMER
+};
+
+static int ingenic_tcu_register_clock(struct ingenic_tcu *tcu, unsigned int idx,
+		const struct ingenic_tcu_clk_info *info)
+{
+	struct ingenic_tcu_clk *tcu_clk;
+	struct clk *clk;
+	int err;
+
+	tcu_clk = kzalloc(sizeof(*tcu_clk), GFP_KERNEL);
+	if (!tcu_clk)
+		return -ENOMEM;
+
+	tcu_clk->hw.init = &info->init_data;
+	tcu_clk->idx = idx;
+	tcu_clk->info = info;
+	tcu_clk->tcu = tcu;
+
+	/* Set EXT as the default parent clock */
+	ingenic_tcu_set_parent(&tcu_clk->hw, 2);
+
+	ingenic_tcu_disable(&tcu_clk->hw);
+
+	clk = clk_register(NULL, &tcu_clk->hw);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		goto err_free_tcu_clk;
+	}
+
+	err = clk_register_clkdev(clk, info->init_data.name, NULL);
+	if (err)
+		goto err_clk_unregister;
+
+	tcu->clocks.clks[idx] = clk;
+	return 0;
+
+err_clk_unregister:
+	clk_unregister(clk);
+err_free_tcu_clk:
+	kfree(tcu_clk);
+	return err;
+}
+
+static void __init ingenic_tcu_init(struct device_node *np,
+		enum ingenic_version id)
+{
+	struct ingenic_tcu *tcu;
+	size_t i, nb_clks;
+	int ret = -ENOMEM;
+
+	if (id >= ID_JZ4770)
+		nb_clks = (JZ4770_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
+	else
+		nb_clks = (JZ4740_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu) {
+		pr_err("%s: cannot allocate memory\n", __func__);
+		return;
+	}
+
+	tcu->map = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(tcu->map)) {
+		pr_err("%s: failed to map TCU registers\n", __func__);
+		goto err_free_tcu;
+	}
+
+	tcu->clocks.clk_num = nb_clks;
+	tcu->clocks.clks = kcalloc(nb_clocks, sizeof(struct clk *), GFP_KERNEL);
+	if (!tcu->clocks.clks) {
+		pr_err("%s: cannot allocate memory\n", __func__);
+		goto err_free_tcu;
+	}
+
+	for (i = 0; i < nb_clks; i++) {
+		ret = ingenic_tcu_register_clock(tcu, i,
+				&ingenic_tcu_clk_info[JZ4740_CLK_TIMER0 + i]);
+		if (ret) {
+			pr_err("%s: cannot register clocks\n", __func__);
+			goto err_unregister;
+		}
+	}
+
+	ret = of_clk_add_provider(np, of_clk_src_onecell_get, &tcu->clocks);
+	if (ret) {
+		pr_err("%s: cannot add OF clock provider\n", __func__);
+		goto err_unregister;
+	}
+
+	return;
+
+err_unregister:
+	for (i = 0; i < tcu->clocks.clk_num; i++)
+		if (tcu->clocks.clks[i])
+			clk_unregister(tcu->clocks.clks[i]);
+	kfree(tcu->clocks.clks);
+err_free_tcu:
+	kfree(tcu);
+}
+
+static void __init jz4740_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4740);
+}
+CLK_OF_DECLARE(ingenic_tcu, "ingenic,jz4740-tcu-clocks", jz4740_tcu_init);
+
+static void __init jz4770_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4770);
+}
+CLK_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu-clocks", jz4770_tcu_init);
+
+static void __init jz4780_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4780);
+}
+CLK_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu-clocks", jz4780_tcu_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH 5/6] clocksource: Add a new timer-ingenic driver
  2017-12-29 12:59 [PATCH 0/6] Ingenic JZ47xx TCU drivers Paul Cercueil
                   ` (3 preceding siblings ...)
  2017-12-29 12:59 ` [PATCH 4/6] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
@ 2017-12-29 12:59 ` Paul Cercueil
  2017-12-29 12:59 ` [PATCH 6/6] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
  5 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2017-12-29 12:59 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, linux-kernel, devicetree, Paul Cercueil

This driver will use the TCU (Timer Counter Unit) present on the Ingenic
JZ47xx SoCs to provide the kernel with a clocksource and timers.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../devicetree/bindings/timer/ingenic,tcu.txt      |  35 +++
 drivers/clocksource/Kconfig                        |   8 +
 drivers/clocksource/Makefile                       |   1 +
 drivers/clocksource/timer-ingenic.c                | 259 +++++++++++++++++++++
 4 files changed, 303 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt
 create mode 100644 drivers/clocksource/timer-ingenic.c

diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
new file mode 100644
index 000000000000..e4944972ea53
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
@@ -0,0 +1,35 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit driver
+---------------------------------------------
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
+  * ingenic,jz4740-tcu
+  * ingenic,jz4770-tcu
+  * ingenic,jz4780-tcu
+- interrupt-parent : phandle of the TCU interrupt controller.
+- interrupts : Specifies the interrupts the controller is connected to.
+- clocks : List of phandle & clock specifiers for the TCU clocks.
+- clock-names : List of name strings for the TCU clocks.
+- ingenic,channels: a list of TCU channels to be used as timers.
+
+Example:
+
+/ {
+	regmap {
+		compatible = "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu: timer {
+			compatible = "ingenic,jz4740-tcu";
+
+			clocks = <&tcu 0>, <&tcu 1>;
+			clock-names = "timer0", "timer1";
+
+			interrupt-parent = <&tcu>;
+			interrupts = <0>, <1>;
+
+			ingenic,channels = <0>, <1>;
+		};
+	};
+};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index c729a88007d0..7b6dedf0347d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -583,4 +583,12 @@ config CLKSRC_ST_LPC
 	  Enable this option to use the Low Power controller timer
 	  as clocksource.
 
+config INGENIC_TIMER
+	bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
+	depends on MACH_INGENIC || COMPILE_TEST
+	select CLKSRC_OF
+	default y
+	help
+	  Support for the timer/counter unit of the Ingenic JZ SoCs.
+
 endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 72711f1491e3..607c7de07d02 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -73,5 +73,6 @@ obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
+obj-$(CONFIG_INGENIC_TIMER)		+= timer-ingenic.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
diff --git a/drivers/clocksource/timer-ingenic.c b/drivers/clocksource/timer-ingenic.c
new file mode 100644
index 000000000000..2ec922e5fc0b
--- /dev/null
+++ b/drivers/clocksource/timer-ingenic.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2016 Paul Cercueil <paul@crapouillou.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/ingenic-tcu.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define NUM_CHANNELS	8
+
+struct ingenic_tcu;
+
+struct ingenic_tcu_channel {
+	unsigned int idx;
+	struct clk *clk;
+};
+
+struct ingenic_tcu {
+	struct ingenic_tcu_channel channels[NUM_CHANNELS];
+	unsigned long requested;
+	struct regmap *map;
+};
+
+struct ingenic_clock_event_device {
+	struct clock_event_device cevt;
+	struct ingenic_tcu_channel *channel;
+	char name[32];
+};
+
+#define ingenic_cevt(_evt) \
+	container_of(_evt, struct ingenic_clock_event_device, cevt)
+
+static inline struct ingenic_tcu *to_ingenic_tcu(struct ingenic_tcu_channel *ch)
+{
+	return container_of(ch, struct ingenic_tcu, channels[ch->idx]);
+}
+
+static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	regmap_write(tcu->map, REG_TECR, BIT(idx));
+	return 0;
+}
+
+static int ingenic_tcu_cevt_set_next(unsigned long next,
+		struct clock_event_device *evt)
+{
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	if (next > 0xffff)
+		return -EINVAL;
+
+	regmap_write(tcu->map, REG_TDFRc(idx), (unsigned int) next);
+	regmap_write(tcu->map, REG_TCNTc(idx), 0);
+	regmap_write(tcu->map, REG_TESR, BIT(idx));
+
+	return 0;
+}
+
+static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
+{
+	struct clock_event_device *cevt = dev_id;
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(cevt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	regmap_write(tcu->map, REG_TECR, BIT(idx));
+
+	if (cevt->event_handler)
+		cevt->event_handler(cevt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ingenic_tcu_req_channel(struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	char buf[16];
+	int err;
+
+	if (test_and_set_bit(channel->idx, &tcu->requested))
+		return -EBUSY;
+
+	snprintf(buf, sizeof(buf), "timer%u", channel->idx);
+	channel->clk = clk_get(NULL, buf);
+	if (IS_ERR(channel->clk)) {
+		err = PTR_ERR(channel->clk);
+		goto out_release;
+	}
+
+	err = clk_prepare_enable(channel->clk);
+	if (err)
+		goto out_clk_put;
+
+	return 0;
+
+out_clk_put:
+	clk_put(channel->clk);
+out_release:
+	clear_bit(channel->idx, &tcu->requested);
+	return err;
+}
+
+static int __init ingenic_tcu_reset_channel(struct device_node *np,
+		struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+
+	return regmap_update_bits(tcu->map, REG_TCSRc(channel->idx),
+				0xffff & ~TCSR_RESERVED_BITS, 0);
+}
+
+static void __init ingenic_tcu_free_channel(struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+
+	clk_disable_unprepare(channel->clk);
+	clk_put(channel->clk);
+	clear_bit(channel->idx, &tcu->requested);
+}
+
+static const char * const ingenic_tcu_timer_names[] = {
+	"TCU0", "TCU1", "TCU2", "TCU3", "TCU4", "TCU5", "TCU6", "TCU7",
+};
+
+static int __init ingenic_tcu_setup_cevt(struct device_node *np,
+		struct ingenic_tcu *tcu, unsigned int idx)
+{
+	struct ingenic_tcu_channel *channel = &tcu->channels[idx];
+	struct ingenic_clock_event_device *jzcevt;
+	unsigned long rate;
+	int err, virq;
+
+	err = ingenic_tcu_req_channel(channel);
+	if (err)
+		return err;
+
+	err = ingenic_tcu_reset_channel(np, channel);
+	if (err)
+		goto err_out_free_channel;
+
+	rate = clk_get_rate(channel->clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_out_free_channel;
+	}
+
+	jzcevt = kzalloc(sizeof(*jzcevt), GFP_KERNEL);
+	if (!jzcevt) {
+		err = -ENOMEM;
+		goto err_out_free_channel;
+	}
+
+	virq = irq_of_parse_and_map(np, idx);
+	if (!virq) {
+		err = -EINVAL;
+		goto err_out_kfree_jzcevt;
+	}
+
+	err = request_irq(virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
+			ingenic_tcu_timer_names[idx], &jzcevt->cevt);
+	if (err)
+		goto err_out_irq_dispose_mapping;
+
+	jzcevt->channel = channel;
+	snprintf(jzcevt->name, sizeof(jzcevt->name), "ingenic-tcu-chan%u",
+		 channel->idx);
+
+	jzcevt->cevt.cpumask = cpumask_of(smp_processor_id());
+	jzcevt->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+	jzcevt->cevt.name = jzcevt->name;
+	jzcevt->cevt.rating = 200;
+	jzcevt->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+	jzcevt->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+
+	clockevents_config_and_register(&jzcevt->cevt, rate, 10, (1 << 16) - 1);
+
+	return 0;
+
+err_out_irq_dispose_mapping:
+	irq_dispose_mapping(virq);
+err_out_kfree_jzcevt:
+	kfree(jzcevt);
+err_out_free_channel:
+	ingenic_tcu_free_channel(channel);
+	return err;
+}
+
+static int __init ingenic_tcu_init(struct device_node *np)
+{
+	struct ingenic_tcu *tcu;
+	unsigned int i;
+	int err, num_timers;
+
+	num_timers = of_property_count_elems_of_size(np, "ingenic,channels", 4);
+	if (num_timers < 0) {
+		pr_err("timer-ingenic: Unable to read DTS node");
+		return num_timers;
+	}
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu)
+		return -ENOMEM;
+
+	tcu->map = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(tcu->map)) {
+		err = PTR_ERR(tcu->map);
+		kfree(tcu);
+		return err;
+	}
+
+	for (i = 0; i < NUM_CHANNELS; i++)
+		tcu->channels[i].idx = i;
+
+	for (i = 0; i < (unsigned int) num_timers; i++) {
+		u32 channel;
+
+		of_property_read_u32_index(np, "ingenic,channels", i, &channel);
+
+		if (channel > NUM_CHANNELS) {
+			pr_warn("timer-ingenic: requested TCU channel %u does not exist\n",
+					channel);
+			continue;
+		}
+
+		err = ingenic_tcu_setup_cevt(np, tcu, channel);
+		if (err) {
+			pr_warn("timer-ingenic: Unable to init TCU channel %u: %i",
+					channel, err);
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+CLOCKSOURCE_OF_DECLARE(jz4740_tcu, "ingenic,jz4740-tcu", ingenic_tcu_init);
+CLOCKSOURCE_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu", ingenic_tcu_init);
+CLOCKSOURCE_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu", ingenic_tcu_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH 6/6] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  2017-12-29 12:59 [PATCH 0/6] Ingenic JZ47xx TCU drivers Paul Cercueil
                   ` (4 preceding siblings ...)
  2017-12-29 12:59 ` [PATCH 5/6] clocksource: Add a new timer-ingenic driver Paul Cercueil
@ 2017-12-29 12:59 ` Paul Cercueil
  5 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2017-12-29 12:59 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, linux-kernel, devicetree, Paul Cercueil

Add myself as maintainer for the ingenic-tcu-intc interrupt controller
driver, the ingenic-tcu-clocks clock driver, and the ingenic-tcu
clocksource driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index a6e86e20761e..1f274bc2bbf7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6908,6 +6908,15 @@ L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/nand/jz4780_*
 
+INGENIC JZ47xx TCU drivers
+M:	Paul Cercueil <paul@crapouillou.net>
+S:	Maintained
+F:	drivers/clk/ingenic/tcu.c
+F:	drivers/irqchip/irq-ingenic-tcu.c
+F:	drivers/clocksource/timer-ingenic.c
+F:	include/linux/mfd/syscon/ingenic-tcu.h
+F:	include/dt-bindings/clock/ingenic,tcu.h
+
 INOTIFY
 M:	Jan Kara <jack@suse.cz>
 R:	Amir Goldstein <amir73il@gmail.com>
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* Re: [PATCH 4/6] clk: ingenic: Add JZ47xx TCU clocks driver
  2017-12-29 12:59 ` [PATCH 4/6] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
@ 2017-12-29 14:02   ` Paul Cercueil
  2018-01-01 12:47   ` kbuild test robot
  1 sibling, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2017-12-29 14:02 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, linux-kernel, devicetree


[...]

> +	tcu->clocks.clk_num = nb_clks;
> +	tcu->clocks.clks = kcalloc(nb_clocks, sizeof(struct clk *), 
> GFP_KERNEL);
> +	if (!tcu->clocks.clks) {
> +		pr_err("%s: cannot allocate memory\n", __func__);
> +		goto err_free_tcu;
> +	}

Facepalm. A quick edit from kzalloc to kcalloc and I managed to break 
it.
It should be nb_clks not nb_clocks. I'll fix that in the V2.

-Paul


^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH 4/6] clk: ingenic: Add JZ47xx TCU clocks driver
  2017-12-29 12:59 ` [PATCH 4/6] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
  2017-12-29 14:02   ` Paul Cercueil
@ 2018-01-01 12:47   ` kbuild test robot
  1 sibling, 0 replies; 80+ messages in thread
From: kbuild test robot @ 2018-01-01 12:47 UTC (permalink / raw)
  Cc: kbuild-all, Michael Turquette, Stephen Boyd, Rob Herring,
	Mark Rutland, Thomas Gleixner, Jason Cooper, Marc Zyngier,
	Daniel Lezcano, Lee Jones, linux-clk, linux-kernel, devicetree,
	Paul Cercueil

[-- Attachment #1: Type: text/plain, Size: 3183 bytes --]

Hi Paul,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on tip/irq/core]
[also build test ERROR on v4.15-rc6 next-20171222]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Paul-Cercueil/Ingenic-JZ47xx-TCU-drivers/20180101-184936
config: mips-qi_lb60_defconfig (attached as .config)
compiler: mipsel-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=mips 

All errors (new ones prefixed by >>):

   drivers/clk//ingenic/tcu.c: In function 'ingenic_tcu_init':
>> drivers/clk//ingenic/tcu.c:293:29: error: 'nb_clocks' undeclared (first use in this function); did you mean 'nb_clks'?
     tcu->clocks.clks = kcalloc(nb_clocks, sizeof(struct clk *), GFP_KERNEL);
                                ^~~~~~~~~
                                nb_clks
   drivers/clk//ingenic/tcu.c:293:29: note: each undeclared identifier is reported only once for each function it appears in

vim +293 drivers/clk//ingenic/tcu.c

   267	
   268	static void __init ingenic_tcu_init(struct device_node *np,
   269			enum ingenic_version id)
   270	{
   271		struct ingenic_tcu *tcu;
   272		size_t i, nb_clks;
   273		int ret = -ENOMEM;
   274	
   275		if (id >= ID_JZ4770)
   276			nb_clks = (JZ4770_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
   277		else
   278			nb_clks = (JZ4740_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
   279	
   280		tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
   281		if (!tcu) {
   282			pr_err("%s: cannot allocate memory\n", __func__);
   283			return;
   284		}
   285	
   286		tcu->map = syscon_node_to_regmap(np->parent);
   287		if (IS_ERR(tcu->map)) {
   288			pr_err("%s: failed to map TCU registers\n", __func__);
   289			goto err_free_tcu;
   290		}
   291	
   292		tcu->clocks.clk_num = nb_clks;
 > 293		tcu->clocks.clks = kcalloc(nb_clocks, sizeof(struct clk *), GFP_KERNEL);
   294		if (!tcu->clocks.clks) {
   295			pr_err("%s: cannot allocate memory\n", __func__);
   296			goto err_free_tcu;
   297		}
   298	
   299		for (i = 0; i < nb_clks; i++) {
   300			ret = ingenic_tcu_register_clock(tcu, i,
   301					&ingenic_tcu_clk_info[JZ4740_CLK_TIMER0 + i]);
   302			if (ret) {
   303				pr_err("%s: cannot register clocks\n", __func__);
   304				goto err_unregister;
   305			}
   306		}
   307	
   308		ret = of_clk_add_provider(np, of_clk_src_onecell_get, &tcu->clocks);
   309		if (ret) {
   310			pr_err("%s: cannot add OF clock provider\n", __func__);
   311			goto err_unregister;
   312		}
   313	
   314		return;
   315	
   316	err_unregister:
   317		for (i = 0; i < tcu->clocks.clk_num; i++)
   318			if (tcu->clocks.clks[i])
   319				clk_unregister(tcu->clocks.clks[i]);
   320		kfree(tcu->clocks.clks);
   321	err_free_tcu:
   322		kfree(tcu);
   323	}
   324	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 15643 bytes --]

^ permalink raw reply	[flat|nested] 80+ messages in thread

* [PATCH v2 1/6] mfd: syscon: Add ingenic-tcu.h header
  2017-12-29 12:59 ` [PATCH 1/6] mfd: syscon: Add ingenic-tcu.h header Paul Cercueil
@ 2018-01-01 14:33   ` Paul Cercueil
  2018-01-01 14:33     ` [PATCH v2 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
                       ` (6 more replies)
  0 siblings, 7 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-01-01 14:33 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones, linux-clk, devicetree, linux-kernel
  Cc: Paul Cercueil

This header contains macros for the registers that are present in the
regmap shared by all the drivers related to the TCU (Timer Counter Unit)
of the Ingenic JZ47xx SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 include/linux/mfd/syscon/ingenic-tcu.h | 57 ++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 include/linux/mfd/syscon/ingenic-tcu.h

 v2: Use SPDX identifier for the license

diff --git a/include/linux/mfd/syscon/ingenic-tcu.h b/include/linux/mfd/syscon/ingenic-tcu.h
new file mode 100644
index 000000000000..5962165e1309
--- /dev/null
+++ b/include/linux/mfd/syscon/ingenic-tcu.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Header file for the Ingenic JZ47xx TCU driver
+ */
+#ifndef __LINUX_CLK_INGENIC_TCU_H_
+#define __LINUX_CLK_INGENIC_TCU_H_
+
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+
+enum ingenic_tcu_reg {
+	REG_WDT_TDR	= 0x00,
+	REG_WDT_TCER	= 0x04,
+	REG_WDT_TCNT	= 0x08,
+	REG_WDT_TCSR	= 0x0c,
+	REG_TER		= 0x10,
+	REG_TESR	= 0x14,
+	REG_TECR	= 0x18,
+	REG_TSR		= 0x1c,
+	REG_TFR		= 0x20,
+	REG_TFSR	= 0x24,
+	REG_TFCR	= 0x28,
+	REG_TSSR	= 0x2c,
+	REG_TMR		= 0x30,
+	REG_TMSR	= 0x34,
+	REG_TMCR	= 0x38,
+	REG_TSCR	= 0x3c,
+	REG_TDFR0	= 0x40,
+	REG_TDHR0	= 0x44,
+	REG_TCNT0	= 0x48,
+	REG_TCSR0	= 0x4c,
+	REG_OST_DR	= 0xe0,
+	REG_OST_CNTL	= 0xe4,
+	REG_OST_CNTH	= 0xe8,
+	REG_OST_TCSR	= 0xec,
+	REG_TSTR	= 0xf0,
+	REG_TSTSR	= 0xf4,
+	REG_TSTCR	= 0xf8,
+	REG_OST_CNTHBUF	= 0xfc,
+};
+
+#define TCSR_RESERVED_BITS		0x3f
+#define TCSR_PARENT_CLOCK_MASK		0x07
+#define TCSR_PRESCALE_LSB		3
+#define TCSR_PRESCALE_MASK		0x38
+
+#define TCSR_PWM_SD		BIT(9)  /* 0: Shutdown abruptly 1: gracefully */
+#define TCSR_PWM_INITL_HIGH	BIT(8)  /* Sets the initial output level */
+#define TCSR_PWM_EN		BIT(7)  /* PWM pin output enable */
+
+#define CHANNEL_STRIDE		0x10
+#define REG_TDFRc(c)		(REG_TDFR0 + ((c) * CHANNEL_STRIDE))
+#define REG_TDHRc(c)		(REG_TDHR0 + ((c) * CHANNEL_STRIDE))
+#define REG_TCNTc(c)		(REG_TCNT0 + ((c) * CHANNEL_STRIDE))
+#define REG_TCSRc(c)		(REG_TCSR0 + ((c) * CHANNEL_STRIDE))
+
+#endif /* __LINUX_CLK_INGENIC_TCU_H_ */
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v2 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks
  2018-01-01 14:33   ` [PATCH v2 " Paul Cercueil
@ 2018-01-01 14:33     ` Paul Cercueil
  2018-01-03 20:49       ` Rob Herring
  2018-01-01 14:33     ` [PATCH v2 3/6] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
                       ` (5 subsequent siblings)
  6 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-01 14:33 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones, linux-clk, devicetree, linux-kernel
  Cc: Paul Cercueil

This header provides clock numbers for the ingenic,tcu
DT binding.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 include/dt-bindings/clock/ingenic,tcu.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 include/dt-bindings/clock/ingenic,tcu.h

 v2: Use SPDX identifier for the license

diff --git a/include/dt-bindings/clock/ingenic,tcu.h b/include/dt-bindings/clock/ingenic,tcu.h
new file mode 100644
index 000000000000..179815d7b3bb
--- /dev/null
+++ b/include/dt-bindings/clock/ingenic,tcu.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,tcu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+#define __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+
+#define JZ4740_CLK_TIMER0	0
+#define JZ4740_CLK_TIMER1	1
+#define JZ4740_CLK_TIMER2	2
+#define JZ4740_CLK_TIMER3	3
+#define JZ4740_CLK_TIMER4	4
+#define JZ4740_CLK_TIMER5	5
+#define JZ4740_CLK_TIMER6	6
+#define JZ4740_CLK_TIMER7	7
+#define JZ4740_CLK_WDT		8
+#define JZ4740_CLK_LAST		JZ4740_CLK_WDT
+
+#define JZ4770_CLK_OST		9
+#define JZ4770_CLK_LAST		JZ4770_CLK_OST
+
+#endif /* __DT_BINDINGS_CLOCK_INGENIC_TCU_H__ */
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v2 3/6] irqchip: Add the ingenic-tcu-intc driver
  2018-01-01 14:33   ` [PATCH v2 " Paul Cercueil
  2018-01-01 14:33     ` [PATCH v2 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
@ 2018-01-01 14:33     ` Paul Cercueil
       [not found]       ` <20180101143344.2099-3-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
  2018-01-01 14:33     ` [PATCH v2 4/6] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
                       ` (4 subsequent siblings)
  6 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-01 14:33 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones, linux-clk, devicetree, linux-kernel
  Cc: Paul Cercueil

This simple driver handles the IRQ chip of the TCU
(Timer Counter Unit) of the JZ47xx Ingenic SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/interrupt-controller/ingenic,tcu.txt  |  32 +++++
 drivers/irqchip/Kconfig                            |   6 +
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/irq-ingenic-tcu.c                  | 151 +++++++++++++++++++++
 4 files changed, 190 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
 create mode 100644 drivers/irqchip/irq-ingenic-tcu.c

 v2: Use SPDX identifier for the license
     Make KConfig option select CONFIG_IRQ_DOMAIN since we depend on it

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
new file mode 100644
index 000000000000..a3e6318f8461
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
@@ -0,0 +1,32 @@
+Ingenic SoCs Timer/Counter Unit Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
+  * ingenic,jz4740-tcu-intc
+  * ingenic,jz4770-tcu-intc
+  * ingenic,jz4780-tcu-intc
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+- interrupt-parent : phandle of the interrupt controller.
+- interrupts : Specifies the interrupt the controller is connected to.
+
+Example:
+
+/ {
+	regmap {
+		compatible = "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu: interrupt-controller {
+			compatible = "ingenic,jz4740-tcu-intc";
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+	};
+};
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index c70476b34a53..74668f3605b0 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -267,6 +267,12 @@ config INGENIC_IRQ
 	depends on MACH_INGENIC
 	default y
 
+config INGENIC_TCU_IRQ
+	bool
+	depends on MACH_INGENIC || COMPILE_TEST
+	select IRQ_DOMAIN
+	default y
+
 config RENESAS_H8300H_INTC
         bool
 	select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index d2df34a54d38..6effe0271cd6 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_RENESAS_H8300H_INTC)	+= irq-renesas-h8300h.o
 obj-$(CONFIG_RENESAS_H8S_INTC)		+= irq-renesas-h8s.o
 obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
 obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
+obj-$(CONFIG_INGENIC_TCU_IRQ)		+= irq-ingenic-tcu.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
 obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
diff --git a/drivers/irqchip/irq-ingenic-tcu.c b/drivers/irqchip/irq-ingenic-tcu.c
new file mode 100644
index 000000000000..cb7259c403cd
--- /dev/null
+++ b/drivers/irqchip/irq-ingenic-tcu.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU IRQ driver
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/syscon/ingenic-tcu.h>
+
+static void ingenic_tcu_intc_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
+	struct irq_domain *domain = irq_desc_get_handler_data(desc);
+	struct irq_chip_generic *gc = irq_get_domain_generic_chip(domain, 0);
+	struct regmap *map = gc->private;
+	uint32_t irq_reg, irq_mask;
+	unsigned int i;
+
+	regmap_read(map, REG_TFR, &irq_reg);
+	regmap_read(map, REG_TMR, &irq_mask);
+
+	chained_irq_enter(irq_chip, desc);
+
+	irq_reg &= ~irq_mask;
+
+	for (i = 0; i < 32; i++) {
+		if (irq_reg & BIT(i))
+			generic_handle_irq(irq_linear_revmap(domain, i));
+	}
+
+	chained_irq_exit(irq_chip, desc);
+}
+
+static void ingenic_tcu_gc_unmask_enable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.ack, mask);
+	regmap_write(map, ct->regs.enable, mask);
+	*ct->mask_cache |= mask;
+	irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.disable, mask);
+	*ct->mask_cache &= ~mask;
+	irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg_and_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.ack, mask);
+	regmap_write(map, ct->regs.disable, mask);
+	irq_gc_unlock(gc);
+}
+
+static int __init ingenic_tcu_intc_of_init(struct device_node *node,
+	struct device_node *parent)
+{
+	struct irq_domain *domain;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	int err, i, num_parent_irqs;
+	unsigned int parent_irqs[3];
+	struct regmap *map;
+
+	num_parent_irqs = of_property_count_elems_of_size(
+			node, "interrupts", 4);
+	if (num_parent_irqs < 0 || num_parent_irqs > ARRAY_SIZE(parent_irqs))
+		return -EINVAL;
+
+	map = syscon_node_to_regmap(node->parent);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops, NULL);
+	if (!domain)
+		return -ENOMEM;
+
+	err = irq_alloc_domain_generic_chips(domain, 32, 1, "TCU",
+			handle_level_irq, 0, IRQ_NOPROBE | IRQ_LEVEL, 0);
+	if (err)
+		goto out_domain_remove;
+
+	gc = irq_get_domain_generic_chip(domain, 0);
+	ct = gc->chip_types;
+
+	gc->wake_enabled = IRQ_MSK(32);
+	gc->private = map;
+
+	ct->regs.disable = REG_TMSR;
+	ct->regs.enable = REG_TMCR;
+	ct->regs.ack = REG_TFCR;
+	ct->chip.irq_unmask = ingenic_tcu_gc_unmask_enable_reg;
+	ct->chip.irq_mask = ingenic_tcu_gc_mask_disable_reg;
+	ct->chip.irq_mask_ack = ingenic_tcu_gc_mask_disable_reg_and_ack;
+	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
+
+	/* Mask all IRQs by default */
+	regmap_write(map, REG_TMSR, IRQ_MSK(32));
+
+	for (i = 0; i < num_parent_irqs; i++) {
+		parent_irqs[i] = irq_of_parse_and_map(node, i);
+		if (!parent_irqs[i]) {
+			err = -EINVAL;
+			goto out_unmap_irqs;
+		}
+
+		irq_set_chained_handler_and_data(parent_irqs[i],
+				ingenic_tcu_intc_cascade, domain);
+	}
+
+	return 0;
+
+out_unmap_irqs:
+	for (; i > 0; i--)
+		irq_dispose_mapping(parent_irqs[i - 1]);
+out_domain_remove:
+	irq_domain_remove(domain);
+	return err;
+}
+IRQCHIP_DECLARE(jz4740_tcu_intc, "ingenic,jz4740-tcu-intc",
+		ingenic_tcu_intc_of_init);
+IRQCHIP_DECLARE(jz4770_tcu_intc, "ingenic,jz4770-tcu-intc",
+		ingenic_tcu_intc_of_init);
+IRQCHIP_DECLARE(jz4780_tcu_intc, "ingenic,jz4780-tcu-intc",
+		ingenic_tcu_intc_of_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v2 4/6] clk: ingenic: Add JZ47xx TCU clocks driver
  2018-01-01 14:33   ` [PATCH v2 " Paul Cercueil
  2018-01-01 14:33     ` [PATCH v2 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
  2018-01-01 14:33     ` [PATCH v2 3/6] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
@ 2018-01-01 14:33     ` Paul Cercueil
  2018-01-02 19:13       ` Stephen Boyd
  2018-01-01 14:33     ` [PATCH v2 5/6] clocksource: Add a new timer-ingenic driver Paul Cercueil
                       ` (3 subsequent siblings)
  6 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-01 14:33 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones, linux-clk, devicetree, linux-kernel
  Cc: Paul Cercueil

The TCU (Timer Counter Unit) of the Ingenic JZ47xx SoCs features 8
channels, each one having its own clock, that can be started and
stopped, reparented, and reclocked.

This driver only modifies the bits of the registers of the TCU that are
related to clocks control. It provides one clock per TCU channel (plus
one for the watchdog and one for the OS timer) that can be used by other
drivers.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/clock/ingenic,tcu-clocks.txt          |  35 +++
 drivers/clk/ingenic/Makefile                       |   2 +-
 drivers/clk/ingenic/tcu.c                          | 336 +++++++++++++++++++++
 3 files changed, 372 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
 create mode 100644 drivers/clk/ingenic/tcu.c

 v2: Use SPDX identifier for the license
     Fix broken build caused by typo when correcting patch

diff --git a/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
new file mode 100644
index 000000000000..ed1468a6aa27
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
@@ -0,0 +1,35 @@
+Ingenic SoC TCU binding
+
+The TCU is the Timer/Counter Unit present in all Ingenic SoCs. It features 8
+channels, each one having its own clock, that can be started and stopped,
+reparented, and reclocked.
+
+Required properties:
+- compatible : One of:
+  * ingenic,jz4740-tcu-clocks,
+  * ingenic,jz4770-tcu-clocks,
+  * ingenic,jz4780-tcu-clocks.
+- clocks : List of phandle & clock specifiers for clocks external to the TCU.
+  The "pclk", "rtc" and "ext" clocks should be provided.
+- clock-names : List of name strings for the external clocks.
+- #clock-cells: Should be 1.
+  Clock consumers specify this argument to identify a clock. The valid values
+  may be found in <dt-bindings/clock/ingenic,tcu.h>.
+
+Example:
+
+/ {
+	regmap {
+		compatible = "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu: clocks {
+			compatible = "ingenic,jz4740-tcu-clocks";
+
+			clocks = <&ext>, <&rtc>, <&pclk>;
+			clock-names = "ext", "rtc", "pclk";
+
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index cd47b0664c2b..e373118a3726 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -1,3 +1,3 @@
-obj-y				+= cgu.o
+obj-y				+= cgu.o tcu.o
 obj-$(CONFIG_MACH_JZ4740)	+= jz4740-cgu.o
 obj-$(CONFIG_MACH_JZ4780)	+= jz4780-cgu.o
diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
new file mode 100644
index 000000000000..36afe3f02f91
--- /dev/null
+++ b/drivers/clk/ingenic/tcu.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx SoC TCU clocks driver
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/ingenic-tcu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+enum ingenic_version {
+	ID_JZ4740,
+	ID_JZ4770,
+	ID_JZ4780,
+};
+
+struct ingenic_tcu {
+	struct device_node *np;
+	struct regmap *map;
+
+	struct clk_onecell_data clocks;
+};
+
+struct ingenic_tcu_clk_info {
+	struct clk_init_data init_data;
+	u8 gate_bit;
+	u8 tcsr_reg;
+};
+
+struct ingenic_tcu_clk {
+	struct clk_hw hw;
+
+	struct ingenic_tcu *tcu;
+	const struct ingenic_tcu_clk_info *info;
+
+	unsigned int idx;
+};
+
+#define to_tcu_clk(_hw) container_of(_hw, struct ingenic_tcu_clk, hw)
+
+static int ingenic_tcu_enable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+	regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
+	return 0;
+}
+
+static void ingenic_tcu_disable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+
+	regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
+}
+
+static int ingenic_tcu_is_enabled(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int value;
+
+	regmap_read(tcu->map, REG_TSR, &value);
+
+	return !(value & BIT(info->gate_bit));
+}
+
+static u8 ingenic_tcu_get_parent(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int val = 0;
+	int ret;
+
+	ret = regmap_read(tcu->map, info->tcsr_reg, &val);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	return (u8) ffs(val & TCSR_PARENT_CLOCK_MASK) - 1;
+}
+
+static int ingenic_tcu_set_parent(struct clk_hw *hw, u8 idx)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	int ret;
+
+	/*
+	 * Our clock provider has the CLK_SET_PARENT_GATE flag set, so we know
+	 * that the clk is in unprepared state. To be able to access TCSR
+	 * we must ungate the clock supply and we gate it again when done.
+	 */
+
+	regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
+
+	ret = regmap_update_bits(tcu->map, info->tcsr_reg,
+			TCSR_PARENT_CLOCK_MASK, BIT(idx));
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static unsigned long ingenic_tcu_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int prescale;
+	int ret;
+
+	ret = regmap_read(tcu->map, info->tcsr_reg, &prescale);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	prescale = (prescale & TCSR_PRESCALE_MASK) >> TCSR_PRESCALE_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long *parent_rate)
+{
+	long rate = (long) *parent_rate;
+	unsigned int shift;
+
+	if (req_rate > rate)
+		return -EINVAL;
+
+	for (shift = 0; shift < 10; shift += 2)
+		if ((rate >> shift) <= req_rate)
+			return rate >> shift;
+
+	return rate >> 10;
+}
+
+static int ingenic_tcu_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	u8 prescale = (ffs(parent_rate / req_rate) / 2) << TCSR_PRESCALE_LSB;
+	int ret;
+
+	/*
+	 * Our clock provider has the CLK_SET_RATE_GATE flag set, so we know
+	 * that the clk is in unprepared state. To be able to access TCSR
+	 * we must ungate the clock supply and we gate it again when done.
+	 */
+
+	regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
+
+	ret = regmap_update_bits(tcu->map, info->tcsr_reg,
+				TCSR_PRESCALE_MASK, prescale);
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static const struct clk_ops ingenic_tcu_clk_ops = {
+	.get_parent	= ingenic_tcu_get_parent,
+	.set_parent	= ingenic_tcu_set_parent,
+
+	.recalc_rate	= ingenic_tcu_recalc_rate,
+	.round_rate	= ingenic_tcu_round_rate,
+	.set_rate	= ingenic_tcu_set_rate,
+
+	.enable		= ingenic_tcu_enable,
+	.disable	= ingenic_tcu_disable,
+	.is_enabled	= ingenic_tcu_is_enabled,
+};
+
+static const char * const ingenic_tcu_timer_parents[] = {
+	"pclk",
+	"rtc",
+	"ext",
+};
+
+static const struct ingenic_tcu_clk_info ingenic_tcu_clk_info[] = {
+#define DEF_TIMER(_name, _gate_bit, _tcsr)				\
+	{								\
+		.init_data = {						\
+			.name = _name,					\
+			.parent_names = ingenic_tcu_timer_parents,	\
+			.num_parents = ARRAY_SIZE(ingenic_tcu_timer_parents),\
+			.ops = &ingenic_tcu_clk_ops,			\
+			.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE,\
+		},							\
+		.gate_bit = _gate_bit,					\
+		.tcsr_reg = _tcsr,					\
+	}
+	[JZ4740_CLK_TIMER0] = DEF_TIMER("timer0", 0, REG_TCSRc(0)),
+	[JZ4740_CLK_TIMER1] = DEF_TIMER("timer1", 1, REG_TCSRc(1)),
+	[JZ4740_CLK_TIMER2] = DEF_TIMER("timer2", 2, REG_TCSRc(2)),
+	[JZ4740_CLK_TIMER3] = DEF_TIMER("timer3", 3, REG_TCSRc(3)),
+	[JZ4740_CLK_TIMER4] = DEF_TIMER("timer4", 4, REG_TCSRc(4)),
+	[JZ4740_CLK_TIMER5] = DEF_TIMER("timer5", 5, REG_TCSRc(5)),
+	[JZ4740_CLK_TIMER6] = DEF_TIMER("timer6", 6, REG_TCSRc(6)),
+	[JZ4740_CLK_TIMER7] = DEF_TIMER("timer7", 7, REG_TCSRc(7)),
+	[JZ4740_CLK_WDT]    = DEF_TIMER("wdt",   16, REG_WDT_TCSR),
+	[JZ4770_CLK_OST]    = DEF_TIMER("ost",   15, REG_OST_TCSR),
+#undef DEF_TIMER
+};
+
+static int ingenic_tcu_register_clock(struct ingenic_tcu *tcu, unsigned int idx,
+		const struct ingenic_tcu_clk_info *info)
+{
+	struct ingenic_tcu_clk *tcu_clk;
+	struct clk *clk;
+	int err;
+
+	tcu_clk = kzalloc(sizeof(*tcu_clk), GFP_KERNEL);
+	if (!tcu_clk)
+		return -ENOMEM;
+
+	tcu_clk->hw.init = &info->init_data;
+	tcu_clk->idx = idx;
+	tcu_clk->info = info;
+	tcu_clk->tcu = tcu;
+
+	/* Set EXT as the default parent clock */
+	ingenic_tcu_set_parent(&tcu_clk->hw, 2);
+
+	ingenic_tcu_disable(&tcu_clk->hw);
+
+	clk = clk_register(NULL, &tcu_clk->hw);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		goto err_free_tcu_clk;
+	}
+
+	err = clk_register_clkdev(clk, info->init_data.name, NULL);
+	if (err)
+		goto err_clk_unregister;
+
+	tcu->clocks.clks[idx] = clk;
+	return 0;
+
+err_clk_unregister:
+	clk_unregister(clk);
+err_free_tcu_clk:
+	kfree(tcu_clk);
+	return err;
+}
+
+static void __init ingenic_tcu_init(struct device_node *np,
+		enum ingenic_version id)
+{
+	struct ingenic_tcu *tcu;
+	size_t i, nb_clks;
+	int ret = -ENOMEM;
+
+	if (id >= ID_JZ4770)
+		nb_clks = (JZ4770_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
+	else
+		nb_clks = (JZ4740_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu) {
+		pr_err("%s: cannot allocate memory\n", __func__);
+		return;
+	}
+
+	tcu->map = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(tcu->map)) {
+		pr_err("%s: failed to map TCU registers\n", __func__);
+		goto err_free_tcu;
+	}
+
+	tcu->clocks.clk_num = nb_clks;
+	tcu->clocks.clks = kcalloc(nb_clks, sizeof(struct clk *), GFP_KERNEL);
+	if (!tcu->clocks.clks) {
+		pr_err("%s: cannot allocate memory\n", __func__);
+		goto err_free_tcu;
+	}
+
+	for (i = 0; i < nb_clks; i++) {
+		ret = ingenic_tcu_register_clock(tcu, i,
+				&ingenic_tcu_clk_info[JZ4740_CLK_TIMER0 + i]);
+		if (ret) {
+			pr_err("%s: cannot register clocks\n", __func__);
+			goto err_unregister;
+		}
+	}
+
+	ret = of_clk_add_provider(np, of_clk_src_onecell_get, &tcu->clocks);
+	if (ret) {
+		pr_err("%s: cannot add OF clock provider\n", __func__);
+		goto err_unregister;
+	}
+
+	return;
+
+err_unregister:
+	for (i = 0; i < tcu->clocks.clk_num; i++)
+		if (tcu->clocks.clks[i])
+			clk_unregister(tcu->clocks.clks[i]);
+	kfree(tcu->clocks.clks);
+err_free_tcu:
+	kfree(tcu);
+}
+
+static void __init jz4740_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4740);
+}
+CLK_OF_DECLARE(ingenic_tcu, "ingenic,jz4740-tcu-clocks", jz4740_tcu_init);
+
+static void __init jz4770_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4770);
+}
+CLK_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu-clocks", jz4770_tcu_init);
+
+static void __init jz4780_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4780);
+}
+CLK_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu-clocks", jz4780_tcu_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v2 5/6] clocksource: Add a new timer-ingenic driver
  2018-01-01 14:33   ` [PATCH v2 " Paul Cercueil
                       ` (2 preceding siblings ...)
  2018-01-01 14:33     ` [PATCH v2 4/6] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
@ 2018-01-01 14:33     ` Paul Cercueil
  2018-01-03 21:08       ` Rob Herring
  2018-01-01 14:33     ` [PATCH v2 6/6] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
                       ` (2 subsequent siblings)
  6 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-01 14:33 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones, linux-clk, devicetree, linux-kernel
  Cc: Paul Cercueil

This driver will use the TCU (Timer Counter Unit) present on the Ingenic
JZ47xx SoCs to provide the kernel with a clocksource and timers.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../devicetree/bindings/timer/ingenic,tcu.txt      |  35 +++
 drivers/clocksource/Kconfig                        |   8 +
 drivers/clocksource/Makefile                       |   1 +
 drivers/clocksource/timer-ingenic.c                | 256 +++++++++++++++++++++
 4 files changed, 300 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt
 create mode 100644 drivers/clocksource/timer-ingenic.c

 v2: Use SPDX identifier for the license

diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
new file mode 100644
index 000000000000..e4944972ea53
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
@@ -0,0 +1,35 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit driver
+---------------------------------------------
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
+  * ingenic,jz4740-tcu
+  * ingenic,jz4770-tcu
+  * ingenic,jz4780-tcu
+- interrupt-parent : phandle of the TCU interrupt controller.
+- interrupts : Specifies the interrupts the controller is connected to.
+- clocks : List of phandle & clock specifiers for the TCU clocks.
+- clock-names : List of name strings for the TCU clocks.
+- ingenic,channels: a list of TCU channels to be used as timers.
+
+Example:
+
+/ {
+	regmap {
+		compatible = "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu: timer {
+			compatible = "ingenic,jz4740-tcu";
+
+			clocks = <&tcu 0>, <&tcu 1>;
+			clock-names = "timer0", "timer1";
+
+			interrupt-parent = <&tcu>;
+			interrupts = <0>, <1>;
+
+			ingenic,channels = <0>, <1>;
+		};
+	};
+};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index c729a88007d0..7b6dedf0347d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -583,4 +583,12 @@ config CLKSRC_ST_LPC
 	  Enable this option to use the Low Power controller timer
 	  as clocksource.
 
+config INGENIC_TIMER
+	bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
+	depends on MACH_INGENIC || COMPILE_TEST
+	select CLKSRC_OF
+	default y
+	help
+	  Support for the timer/counter unit of the Ingenic JZ SoCs.
+
 endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 72711f1491e3..607c7de07d02 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -73,5 +73,6 @@ obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
+obj-$(CONFIG_INGENIC_TIMER)		+= timer-ingenic.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
diff --git a/drivers/clocksource/timer-ingenic.c b/drivers/clocksource/timer-ingenic.c
new file mode 100644
index 000000000000..d9e1c0b23f81
--- /dev/null
+++ b/drivers/clocksource/timer-ingenic.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx SoC TCU clocksource driver
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/ingenic-tcu.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define NUM_CHANNELS	8
+
+struct ingenic_tcu;
+
+struct ingenic_tcu_channel {
+	unsigned int idx;
+	struct clk *clk;
+};
+
+struct ingenic_tcu {
+	struct ingenic_tcu_channel channels[NUM_CHANNELS];
+	unsigned long requested;
+	struct regmap *map;
+};
+
+struct ingenic_clock_event_device {
+	struct clock_event_device cevt;
+	struct ingenic_tcu_channel *channel;
+	char name[32];
+};
+
+#define ingenic_cevt(_evt) \
+	container_of(_evt, struct ingenic_clock_event_device, cevt)
+
+static inline struct ingenic_tcu *to_ingenic_tcu(struct ingenic_tcu_channel *ch)
+{
+	return container_of(ch, struct ingenic_tcu, channels[ch->idx]);
+}
+
+static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	regmap_write(tcu->map, REG_TECR, BIT(idx));
+	return 0;
+}
+
+static int ingenic_tcu_cevt_set_next(unsigned long next,
+		struct clock_event_device *evt)
+{
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	if (next > 0xffff)
+		return -EINVAL;
+
+	regmap_write(tcu->map, REG_TDFRc(idx), (unsigned int) next);
+	regmap_write(tcu->map, REG_TCNTc(idx), 0);
+	regmap_write(tcu->map, REG_TESR, BIT(idx));
+
+	return 0;
+}
+
+static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
+{
+	struct clock_event_device *cevt = dev_id;
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(cevt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	regmap_write(tcu->map, REG_TECR, BIT(idx));
+
+	if (cevt->event_handler)
+		cevt->event_handler(cevt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ingenic_tcu_req_channel(struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	char buf[16];
+	int err;
+
+	if (test_and_set_bit(channel->idx, &tcu->requested))
+		return -EBUSY;
+
+	snprintf(buf, sizeof(buf), "timer%u", channel->idx);
+	channel->clk = clk_get(NULL, buf);
+	if (IS_ERR(channel->clk)) {
+		err = PTR_ERR(channel->clk);
+		goto out_release;
+	}
+
+	err = clk_prepare_enable(channel->clk);
+	if (err)
+		goto out_clk_put;
+
+	return 0;
+
+out_clk_put:
+	clk_put(channel->clk);
+out_release:
+	clear_bit(channel->idx, &tcu->requested);
+	return err;
+}
+
+static int __init ingenic_tcu_reset_channel(struct device_node *np,
+		struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+
+	return regmap_update_bits(tcu->map, REG_TCSRc(channel->idx),
+				0xffff & ~TCSR_RESERVED_BITS, 0);
+}
+
+static void __init ingenic_tcu_free_channel(struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+
+	clk_disable_unprepare(channel->clk);
+	clk_put(channel->clk);
+	clear_bit(channel->idx, &tcu->requested);
+}
+
+static const char * const ingenic_tcu_timer_names[] = {
+	"TCU0", "TCU1", "TCU2", "TCU3", "TCU4", "TCU5", "TCU6", "TCU7",
+};
+
+static int __init ingenic_tcu_setup_cevt(struct device_node *np,
+		struct ingenic_tcu *tcu, unsigned int idx)
+{
+	struct ingenic_tcu_channel *channel = &tcu->channels[idx];
+	struct ingenic_clock_event_device *jzcevt;
+	unsigned long rate;
+	int err, virq;
+
+	err = ingenic_tcu_req_channel(channel);
+	if (err)
+		return err;
+
+	err = ingenic_tcu_reset_channel(np, channel);
+	if (err)
+		goto err_out_free_channel;
+
+	rate = clk_get_rate(channel->clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_out_free_channel;
+	}
+
+	jzcevt = kzalloc(sizeof(*jzcevt), GFP_KERNEL);
+	if (!jzcevt) {
+		err = -ENOMEM;
+		goto err_out_free_channel;
+	}
+
+	virq = irq_of_parse_and_map(np, idx);
+	if (!virq) {
+		err = -EINVAL;
+		goto err_out_kfree_jzcevt;
+	}
+
+	err = request_irq(virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
+			ingenic_tcu_timer_names[idx], &jzcevt->cevt);
+	if (err)
+		goto err_out_irq_dispose_mapping;
+
+	jzcevt->channel = channel;
+	snprintf(jzcevt->name, sizeof(jzcevt->name), "ingenic-tcu-chan%u",
+		 channel->idx);
+
+	jzcevt->cevt.cpumask = cpumask_of(smp_processor_id());
+	jzcevt->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+	jzcevt->cevt.name = jzcevt->name;
+	jzcevt->cevt.rating = 200;
+	jzcevt->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+	jzcevt->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+
+	clockevents_config_and_register(&jzcevt->cevt, rate, 10, (1 << 16) - 1);
+
+	return 0;
+
+err_out_irq_dispose_mapping:
+	irq_dispose_mapping(virq);
+err_out_kfree_jzcevt:
+	kfree(jzcevt);
+err_out_free_channel:
+	ingenic_tcu_free_channel(channel);
+	return err;
+}
+
+static int __init ingenic_tcu_init(struct device_node *np)
+{
+	struct ingenic_tcu *tcu;
+	unsigned int i;
+	int err, num_timers;
+
+	num_timers = of_property_count_elems_of_size(np, "ingenic,channels", 4);
+	if (num_timers < 0) {
+		pr_err("timer-ingenic: Unable to read DTS node");
+		return num_timers;
+	}
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu)
+		return -ENOMEM;
+
+	tcu->map = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(tcu->map)) {
+		err = PTR_ERR(tcu->map);
+		kfree(tcu);
+		return err;
+	}
+
+	for (i = 0; i < NUM_CHANNELS; i++)
+		tcu->channels[i].idx = i;
+
+	for (i = 0; i < (unsigned int) num_timers; i++) {
+		u32 channel;
+
+		of_property_read_u32_index(np, "ingenic,channels", i, &channel);
+
+		if (channel > NUM_CHANNELS) {
+			pr_warn("timer-ingenic: requested TCU channel %u does not exist\n",
+					channel);
+			continue;
+		}
+
+		err = ingenic_tcu_setup_cevt(np, tcu, channel);
+		if (err) {
+			pr_warn("timer-ingenic: Unable to init TCU channel %u: %i",
+					channel, err);
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+CLOCKSOURCE_OF_DECLARE(jz4740_tcu, "ingenic,jz4740-tcu", ingenic_tcu_init);
+CLOCKSOURCE_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu", ingenic_tcu_init);
+CLOCKSOURCE_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu", ingenic_tcu_init);
-- 
2.11.0


^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v2 6/6] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  2018-01-01 14:33   ` [PATCH v2 " Paul Cercueil
                       ` (3 preceding siblings ...)
  2018-01-01 14:33     ` [PATCH v2 5/6] clocksource: Add a new timer-ingenic driver Paul Cercueil
@ 2018-01-01 14:33     ` Paul Cercueil
  2018-01-02 15:51     ` [PATCH v2 1/6] mfd: syscon: Add ingenic-tcu.h header Lee Jones
  2018-01-10 22:48     ` [PATCH v3 1/9] " Paul Cercueil
  6 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-01-01 14:33 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones, linux-clk, devicetree, linux-kernel
  Cc: Paul Cercueil

Add myself as maintainer for the ingenic-tcu-intc interrupt controller
driver, the ingenic-tcu-clocks clock driver, and the ingenic-tcu
clocksource driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index b46c9cea5ae5..f3d03542d076 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6906,6 +6906,15 @@ L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/nand/jz4780_*
 
+INGENIC JZ47xx TCU drivers
+M:	Paul Cercueil <paul@crapouillou.net>
+S:	Maintained
+F:	drivers/clk/ingenic/tcu.c
+F:	drivers/irqchip/irq-ingenic-tcu.c
+F:	drivers/clocksource/timer-ingenic.c
+F:	include/linux/mfd/syscon/ingenic-tcu.h
+F:	include/dt-bindings/clock/ingenic,tcu.h
+
 INOTIFY
 M:	Jan Kara <jack@suse.cz>
 R:	Amir Goldstein <amir73il@gmail.com>
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 1/6] mfd: syscon: Add ingenic-tcu.h header
  2018-01-01 14:33   ` [PATCH v2 " Paul Cercueil
                       ` (4 preceding siblings ...)
  2018-01-01 14:33     ` [PATCH v2 6/6] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
@ 2018-01-02 15:51     ` Lee Jones
  2018-01-10 22:48     ` [PATCH v3 1/9] " Paul Cercueil
  6 siblings, 0 replies; 80+ messages in thread
From: Lee Jones @ 2018-01-02 15:51 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	linux-clk, devicetree, linux-kernel

On Mon, 01 Jan 2018, Paul Cercueil wrote:

> This header contains macros for the registers that are present in the
> regmap shared by all the drivers related to the TCU (Timer Counter Unit)
> of the Ingenic JZ47xx SoCs.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  include/linux/mfd/syscon/ingenic-tcu.h | 57 ++++++++++++++++++++++++++++++++++
>  1 file changed, 57 insertions(+)
>  create mode 100644 include/linux/mfd/syscon/ingenic-tcu.h
> 
>  v2: Use SPDX identifier for the license
> 
> diff --git a/include/linux/mfd/syscon/ingenic-tcu.h b/include/linux/mfd/syscon/ingenic-tcu.h
> new file mode 100644
> index 000000000000..5962165e1309
> --- /dev/null
> +++ b/include/linux/mfd/syscon/ingenic-tcu.h
> @@ -0,0 +1,57 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Header file for the Ingenic JZ47xx TCU driver
> + */
> +#ifndef __LINUX_CLK_INGENIC_TCU_H_
> +#define __LINUX_CLK_INGENIC_TCU_H_
> +
> +#include <linux/bitops.h>
> +#include <linux/regmap.h>
> +
> +enum ingenic_tcu_reg {
> +	REG_WDT_TDR	= 0x00,
> +	REG_WDT_TCER	= 0x04,
> +	REG_WDT_TCNT	= 0x08,
> +	REG_WDT_TCSR	= 0x0c,
> +	REG_TER		= 0x10,
> +	REG_TESR	= 0x14,
> +	REG_TECR	= 0x18,
> +	REG_TSR		= 0x1c,
> +	REG_TFR		= 0x20,
> +	REG_TFSR	= 0x24,
> +	REG_TFCR	= 0x28,
> +	REG_TSSR	= 0x2c,
> +	REG_TMR		= 0x30,
> +	REG_TMSR	= 0x34,
> +	REG_TMCR	= 0x38,
> +	REG_TSCR	= 0x3c,
> +	REG_TDFR0	= 0x40,
> +	REG_TDHR0	= 0x44,
> +	REG_TCNT0	= 0x48,
> +	REG_TCSR0	= 0x4c,
> +	REG_OST_DR	= 0xe0,
> +	REG_OST_CNTL	= 0xe4,
> +	REG_OST_CNTH	= 0xe8,
> +	REG_OST_TCSR	= 0xec,
> +	REG_TSTR	= 0xf0,
> +	REG_TSTSR	= 0xf4,
> +	REG_TSTCR	= 0xf8,
> +	REG_OST_CNTHBUF	= 0xfc,
> +};

I don't see a need to have declare these as enums.

> +#define TCSR_RESERVED_BITS		0x3f
> +#define TCSR_PARENT_CLOCK_MASK		0x07
> +#define TCSR_PRESCALE_LSB		3
> +#define TCSR_PRESCALE_MASK		0x38
> +
> +#define TCSR_PWM_SD		BIT(9)  /* 0: Shutdown abruptly 1: gracefully */
> +#define TCSR_PWM_INITL_HIGH	BIT(8)  /* Sets the initial output level */
> +#define TCSR_PWM_EN		BIT(7)  /* PWM pin output enable */
> +
> +#define CHANNEL_STRIDE		0x10
> +#define REG_TDFRc(c)		(REG_TDFR0 + ((c) * CHANNEL_STRIDE))
> +#define REG_TDHRc(c)		(REG_TDHR0 + ((c) * CHANNEL_STRIDE))
> +#define REG_TCNTc(c)		(REG_TCNT0 + ((c) * CHANNEL_STRIDE))
> +#define REG_TCSRc(c)		(REG_TCSR0 + ((c) * CHANNEL_STRIDE))

It'd be a good idea to namespace all of these pre-processed definitions.

> +#endif /* __LINUX_CLK_INGENIC_TCU_H_ */

-- 
Lee Jones
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 4/6] clk: ingenic: Add JZ47xx TCU clocks driver
  2018-01-01 14:33     ` [PATCH v2 4/6] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
@ 2018-01-02 19:13       ` Stephen Boyd
  2018-01-02 20:08         ` Paul Cercueil
  0 siblings, 1 reply; 80+ messages in thread
From: Stephen Boyd @ 2018-01-02 19:13 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Rob Herring, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	devicetree, linux-kernel

On 01/01, Paul Cercueil wrote:
> diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
> new file mode 100644
> index 000000000000..36afe3f02f91
> --- /dev/null
> +++ b/drivers/clk/ingenic/tcu.c
> @@ -0,0 +1,336 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Ingenic JZ47xx SoC TCU clocks driver
> + * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/mfd/syscon/ingenic-tcu.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/regmap.h>
> +#include <linux/spinlock.h>

Used?

> +
> +#include <dt-bindings/clock/ingenic,tcu.h>
> +
> +enum ingenic_version {
> +	ID_JZ4740,
> +	ID_JZ4770,
> +	ID_JZ4780,
> +};
> +
> +struct ingenic_tcu {
> +	struct device_node *np;

Is this used?

> +	struct regmap *map;
> +
> +	struct clk_onecell_data clocks;
> +};
> +
> +struct ingenic_tcu_clk_info {
> +	struct clk_init_data init_data;
> +	u8 gate_bit;
> +	u8 tcsr_reg;
> +};
> +
> +struct ingenic_tcu_clk {
> +	struct clk_hw hw;
> +
> +	struct ingenic_tcu *tcu;
> +	const struct ingenic_tcu_clk_info *info;
> +
> +	unsigned int idx;
> +};
> +
> +#define to_tcu_clk(_hw) container_of(_hw, struct ingenic_tcu_clk, hw)
> +
> +static int ingenic_tcu_enable(struct clk_hw *hw)
> +{
> +	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> +	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> +	struct ingenic_tcu *tcu = tcu_clk->tcu;
> +
> +	regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
> +	return 0;
> +}
> +
> +static void ingenic_tcu_disable(struct clk_hw *hw)
> +{
> +	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> +	struct ingenic_tcu *tcu = tcu_clk->tcu;
> +	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> +
> +	regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
> +}
> +
> +static int ingenic_tcu_is_enabled(struct clk_hw *hw)
> +{
> +	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> +	struct ingenic_tcu *tcu = tcu_clk->tcu;
> +	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> +	unsigned int value;
> +
> +	regmap_read(tcu->map, REG_TSR, &value);
> +
> +	return !(value & BIT(info->gate_bit));
> +}
> +
> +static u8 ingenic_tcu_get_parent(struct clk_hw *hw)
> +{
> +	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> +	struct ingenic_tcu *tcu = tcu_clk->tcu;
> +	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> +	unsigned int val = 0;
> +	int ret;
> +
> +	ret = regmap_read(tcu->map, info->tcsr_reg, &val);
> +	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
> +
> +	return (u8) ffs(val & TCSR_PARENT_CLOCK_MASK) - 1;

Is the cast necessary?

> +}
> +
> +static int ingenic_tcu_set_parent(struct clk_hw *hw, u8 idx)
> +{
> +	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> +	struct ingenic_tcu *tcu = tcu_clk->tcu;
> +	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> +	int ret;
> +
> +	/*
> +	 * Our clock provider has the CLK_SET_PARENT_GATE flag set, so we know
> +	 * that the clk is in unprepared state. To be able to access TCSR
> +	 * we must ungate the clock supply and we gate it again when done.
> +	 */
> +
> +	regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
> +
> +	ret = regmap_update_bits(tcu->map, info->tcsr_reg,
> +			TCSR_PARENT_CLOCK_MASK, BIT(idx));
> +	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
> +
> +	regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
> +
> +	return 0;
> +}
> +
> +static unsigned long ingenic_tcu_recalc_rate(struct clk_hw *hw,
> +		unsigned long parent_rate)
> +{
> +	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> +	struct ingenic_tcu *tcu = tcu_clk->tcu;
> +	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> +	unsigned int prescale;
> +	int ret;
> +
> +	ret = regmap_read(tcu->map, info->tcsr_reg, &prescale);
> +	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
> +
> +	prescale = (prescale & TCSR_PRESCALE_MASK) >> TCSR_PRESCALE_LSB;
> +
> +	return parent_rate >> (prescale * 2);
> +}
> +
> +static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
> +		unsigned long *parent_rate)
> +{
> +	long rate = (long) *parent_rate;

Is there a reason why rate is signed here?

> +	unsigned int shift;
> +
> +	if (req_rate > rate)
> +		return -EINVAL;
> +
> +	for (shift = 0; shift < 10; shift += 2)
> +		if ((rate >> shift) <= req_rate)
> +			return rate >> shift;
> +
> +	return rate >> 10;

Can it be?

	for (shift = 0; shift < 10; shift += 2)
		if ((rate >> shift) <= req_rate)
			break;

	return rate >> shift;

> +}
> +
> +static int ingenic_tcu_set_rate(struct clk_hw *hw, unsigned long req_rate,
> +		unsigned long parent_rate)
> +{
> +	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
> +	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
> +	struct ingenic_tcu *tcu = tcu_clk->tcu;
> +	u8 prescale = (ffs(parent_rate / req_rate) / 2) << TCSR_PRESCALE_LSB;
> +	int ret;
> +
> +	/*
> +	 * Our clock provider has the CLK_SET_RATE_GATE flag set, so we know
> +	 * that the clk is in unprepared state. To be able to access TCSR
> +	 * we must ungate the clock supply and we gate it again when done.
> +	 */
> +
> +	regmap_write(tcu->map, REG_TSCR, BIT(info->gate_bit));
> +
> +	ret = regmap_update_bits(tcu->map, info->tcsr_reg,
> +				TCSR_PRESCALE_MASK, prescale);
> +	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
> +
> +	regmap_write(tcu->map, REG_TSSR, BIT(info->gate_bit));
> +
> +	return 0;
> +}
> +
> +static const struct clk_ops ingenic_tcu_clk_ops = {
> +	.get_parent	= ingenic_tcu_get_parent,
> +	.set_parent	= ingenic_tcu_set_parent,
> +
> +	.recalc_rate	= ingenic_tcu_recalc_rate,
> +	.round_rate	= ingenic_tcu_round_rate,
> +	.set_rate	= ingenic_tcu_set_rate,
> +
> +	.enable		= ingenic_tcu_enable,
> +	.disable	= ingenic_tcu_disable,
> +	.is_enabled	= ingenic_tcu_is_enabled,
> +};
> +
> +static const char * const ingenic_tcu_timer_parents[] = {
> +	"pclk",
> +	"rtc",
> +	"ext",
> +};
> +
> +static const struct ingenic_tcu_clk_info ingenic_tcu_clk_info[] = {
> +#define DEF_TIMER(_name, _gate_bit, _tcsr)				\
> +	{								\
> +		.init_data = {						\
> +			.name = _name,					\
> +			.parent_names = ingenic_tcu_timer_parents,	\
> +			.num_parents = ARRAY_SIZE(ingenic_tcu_timer_parents),\
> +			.ops = &ingenic_tcu_clk_ops,			\
> +			.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE,\
> +		},							\
> +		.gate_bit = _gate_bit,					\
> +		.tcsr_reg = _tcsr,					\
> +	}
> +	[JZ4740_CLK_TIMER0] = DEF_TIMER("timer0", 0, REG_TCSRc(0)),
> +	[JZ4740_CLK_TIMER1] = DEF_TIMER("timer1", 1, REG_TCSRc(1)),
> +	[JZ4740_CLK_TIMER2] = DEF_TIMER("timer2", 2, REG_TCSRc(2)),
> +	[JZ4740_CLK_TIMER3] = DEF_TIMER("timer3", 3, REG_TCSRc(3)),
> +	[JZ4740_CLK_TIMER4] = DEF_TIMER("timer4", 4, REG_TCSRc(4)),
> +	[JZ4740_CLK_TIMER5] = DEF_TIMER("timer5", 5, REG_TCSRc(5)),
> +	[JZ4740_CLK_TIMER6] = DEF_TIMER("timer6", 6, REG_TCSRc(6)),
> +	[JZ4740_CLK_TIMER7] = DEF_TIMER("timer7", 7, REG_TCSRc(7)),
> +	[JZ4740_CLK_WDT]    = DEF_TIMER("wdt",   16, REG_WDT_TCSR),
> +	[JZ4770_CLK_OST]    = DEF_TIMER("ost",   15, REG_OST_TCSR),
> +#undef DEF_TIMER
> +};
> +
> +static int ingenic_tcu_register_clock(struct ingenic_tcu *tcu, unsigned int idx,
> +		const struct ingenic_tcu_clk_info *info)
> +{
> +	struct ingenic_tcu_clk *tcu_clk;
> +	struct clk *clk;
> +	int err;
> +
> +	tcu_clk = kzalloc(sizeof(*tcu_clk), GFP_KERNEL);
> +	if (!tcu_clk)
> +		return -ENOMEM;
> +
> +	tcu_clk->hw.init = &info->init_data;
> +	tcu_clk->idx = idx;
> +	tcu_clk->info = info;
> +	tcu_clk->tcu = tcu;
> +
> +	/* Set EXT as the default parent clock */
> +	ingenic_tcu_set_parent(&tcu_clk->hw, 2);
> +
> +	ingenic_tcu_disable(&tcu_clk->hw);
> +
> +	clk = clk_register(NULL, &tcu_clk->hw);

clk_hw_register?

> +	if (IS_ERR(clk)) {
> +		err = PTR_ERR(clk);
> +		goto err_free_tcu_clk;
> +	}
> +
> +	err = clk_register_clkdev(clk, info->init_data.name, NULL);

There's a clk_hw_register_clkdev() too.

> +	if (err)
> +		goto err_clk_unregister;
> +
> +	tcu->clocks.clks[idx] = clk;
> +	return 0;
> +
> +err_clk_unregister:
> +	clk_unregister(clk);
> +err_free_tcu_clk:
> +	kfree(tcu_clk);
> +	return err;
> +}
> +
> +static void __init ingenic_tcu_init(struct device_node *np,
> +		enum ingenic_version id)
> +{
> +	struct ingenic_tcu *tcu;
> +	size_t i, nb_clks;
> +	int ret = -ENOMEM;
> +
> +	if (id >= ID_JZ4770)
> +		nb_clks = (JZ4770_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
> +	else
> +		nb_clks = (JZ4740_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
> +
> +	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
> +	if (!tcu) {
> +		pr_err("%s: cannot allocate memory\n", __func__);

We don't need allocation error messages. Please run checkpatch.

> +		return;
> +	}
> +
> +	tcu->map = syscon_node_to_regmap(np->parent);
> +	if (IS_ERR(tcu->map)) {
> +		pr_err("%s: failed to map TCU registers\n", __func__);
> +		goto err_free_tcu;
> +	}
> +
> +	tcu->clocks.clk_num = nb_clks;
> +	tcu->clocks.clks = kcalloc(nb_clks, sizeof(struct clk *), GFP_KERNEL);
> +	if (!tcu->clocks.clks) {
> +		pr_err("%s: cannot allocate memory\n", __func__);

We don't need allocation error messages. Please run checkpatch.

> +		goto err_free_tcu;
> +	}
> +
> +	for (i = 0; i < nb_clks; i++) {
> +		ret = ingenic_tcu_register_clock(tcu, i,
> +				&ingenic_tcu_clk_info[JZ4740_CLK_TIMER0 + i]);
> +		if (ret) {
> +			pr_err("%s: cannot register clocks\n", __func__);
> +			goto err_unregister;
> +		}
> +	}
> +
> +	ret = of_clk_add_provider(np, of_clk_src_onecell_get, &tcu->clocks);

Can you add a clk_hw provider instead of a clk provider?

> +	if (ret) {
> +		pr_err("%s: cannot add OF clock provider\n", __func__);
> +		goto err_unregister;
> +	}
> +
> +	return;
> +
> +err_unregister:
> +	for (i = 0; i < tcu->clocks.clk_num; i++)
> +		if (tcu->clocks.clks[i])
> +			clk_unregister(tcu->clocks.clks[i]);
> +	kfree(tcu->clocks.clks);
> +err_free_tcu:
> +	kfree(tcu);
> +}
> +

Can you add a comment here describing why we have to use
CLK_OF_DECLARE instead of platform drivers?

> +static void __init jz4740_tcu_init(struct device_node *np)
> +{
> +	ingenic_tcu_init(np, ID_JZ4740);
> +}
> +CLK_OF_DECLARE(ingenic_tcu, "ingenic,jz4740-tcu-clocks", jz4740_tcu_init);
> +
> +static void __init jz4770_tcu_init(struct device_node *np)
> +{
> +	ingenic_tcu_init(np, ID_JZ4770);
> +}
> +CLK_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu-clocks", jz4770_tcu_init);
> +
> +static void __init jz4780_tcu_init(struct device_node *np)
> +{
> +	ingenic_tcu_init(np, ID_JZ4780);
> +}
> +CLK_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu-clocks", jz4780_tcu_init);

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 4/6] clk: ingenic: Add JZ47xx TCU clocks driver
  2018-01-02 19:13       ` Stephen Boyd
@ 2018-01-02 20:08         ` Paul Cercueil
  2018-01-02 22:59           ` Stephen Boyd
  0 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-02 20:08 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: Michael Turquette, Rob Herring, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	devicetree, linux-kernel

Hi,

[...]

>>  +
>>  +static void __init ingenic_tcu_init(struct device_node *np,
>>  +		enum ingenic_version id)
>>  +{
>>  +	struct ingenic_tcu *tcu;
>>  +	size_t i, nb_clks;
>>  +	int ret = -ENOMEM;
>>  +
>>  +	if (id >= ID_JZ4770)
>>  +		nb_clks = (JZ4770_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
>>  +	else
>>  +		nb_clks = (JZ4740_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
>>  +
>>  +	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
>>  +	if (!tcu) {
>>  +		pr_err("%s: cannot allocate memory\n", __func__);
> 
> We don't need allocation error messages. Please run checkpatch.
> 
>>  +		return;
>>  +	}
>>  +
>>  +	tcu->map = syscon_node_to_regmap(np->parent);
>>  +	if (IS_ERR(tcu->map)) {
>>  +		pr_err("%s: failed to map TCU registers\n", __func__);
>>  +		goto err_free_tcu;
>>  +	}
>>  +
>>  +	tcu->clocks.clk_num = nb_clks;
>>  +	tcu->clocks.clks = kcalloc(nb_clks, sizeof(struct clk *), 
>> GFP_KERNEL);
>>  +	if (!tcu->clocks.clks) {
>>  +		pr_err("%s: cannot allocate memory\n", __func__);
> 
> We don't need allocation error messages. Please run checkpatch.

I did run checkpatch, which warned about this, but that's a false 
positive to me.
The callback passed to CLK_OF_DECLARE() has a return type void, so 
there's no
way I can return -ENOMEM, and I don't want the error to be unnoticed.

About the other remarks - I agree with you, I'll fix these in the V2.

Thanks,
-Paul

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 4/6] clk: ingenic: Add JZ47xx TCU clocks driver
  2018-01-02 20:08         ` Paul Cercueil
@ 2018-01-02 22:59           ` Stephen Boyd
  0 siblings, 0 replies; 80+ messages in thread
From: Stephen Boyd @ 2018-01-02 22:59 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Rob Herring, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	devicetree, linux-kernel

On 01/02, Paul Cercueil wrote:
> >> +		goto err_free_tcu;
> >> +	}
> >> +
> >> +	tcu->clocks.clk_num = nb_clks;
> >> +	tcu->clocks.clks = kcalloc(nb_clks, sizeof(struct clk *),
> >>GFP_KERNEL);
> >> +	if (!tcu->clocks.clks) {
> >> +		pr_err("%s: cannot allocate memory\n", __func__);
> >
> >We don't need allocation error messages. Please run checkpatch.
> 
> I did run checkpatch, which warned about this, but that's a false
> positive to me.
> The callback passed to CLK_OF_DECLARE() has a return type void, so
> there's no
> way I can return -ENOMEM, and I don't want the error to be unnoticed.

The kernel typically spews a bunch of information when an
allocation error happens, so your pr_err() will be lost in the
spew, which is why it's not really necessary.

> 
> About the other remarks - I agree with you, I'll fix these in the V2.
> 

Ok.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks
  2018-01-01 14:33     ` [PATCH v2 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
@ 2018-01-03 20:49       ` Rob Herring
  0 siblings, 0 replies; 80+ messages in thread
From: Rob Herring @ 2018-01-03 20:49 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	devicetree, linux-kernel

On Mon, Jan 01, 2018 at 03:33:40PM +0100, Paul Cercueil wrote:
> This header provides clock numbers for the ingenic,tcu
> DT binding.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  include/dt-bindings/clock/ingenic,tcu.h | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 include/dt-bindings/clock/ingenic,tcu.h
> 
>  v2: Use SPDX identifier for the license

Reviewed-by: Rob Herring <robh@kernel.org>


^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 3/6] irqchip: Add the ingenic-tcu-intc driver
       [not found]       ` <20180101143344.2099-3-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
@ 2018-01-03 20:58         ` Rob Herring
  2018-01-03 21:50           ` Paul Cercueil
  0 siblings, 1 reply; 80+ messages in thread
From: Rob Herring @ 2018-01-03 20:58 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones,
	linux-clk-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On Mon, Jan 01, 2018 at 03:33:41PM +0100, Paul Cercueil wrote:
> This simple driver handles the IRQ chip of the TCU
> (Timer Counter Unit) of the JZ47xx Ingenic SoCs.
> 
> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> ---
>  .../bindings/interrupt-controller/ingenic,tcu.txt  |  32 +++++
>  drivers/irqchip/Kconfig                            |   6 +
>  drivers/irqchip/Makefile                           |   1 +
>  drivers/irqchip/irq-ingenic-tcu.c                  | 151 +++++++++++++++++++++
>  4 files changed, 190 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>  create mode 100644 drivers/irqchip/irq-ingenic-tcu.c
> 
>  v2: Use SPDX identifier for the license
>      Make KConfig option select CONFIG_IRQ_DOMAIN since we depend on it
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..a3e6318f8461
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> @@ -0,0 +1,32 @@
> +Ingenic SoCs Timer/Counter Unit Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
> +  * ingenic,jz4740-tcu-intc
> +  * ingenic,jz4770-tcu-intc
> +  * ingenic,jz4780-tcu-intc
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> +  interrupt source. The value shall be 1.
> +- interrupt-parent : phandle of the interrupt controller.
> +- interrupts : Specifies the interrupt the controller is connected to.
> +
> +Example:
> +
> +/ {
> +	regmap {

regmap is a Linuxism.

> +		compatible = "simple-mfd", "syscon";

Need a specific compatible string here. Neither of these are valid by 
themselves.

> +		reg = <0x10002000 0x1000>;
> +
> +		tcu: interrupt-controller {

The TCU is only an interrupt controller?

> +			compatible = "ingenic,jz4740-tcu-intc";

Is there a register range associated with this block? If so, add a reg 
property even if regmap doesn't need it.

> +
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <15>;
> +		};
> +	};
> +};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 5/6] clocksource: Add a new timer-ingenic driver
  2018-01-01 14:33     ` [PATCH v2 5/6] clocksource: Add a new timer-ingenic driver Paul Cercueil
@ 2018-01-03 21:08       ` Rob Herring
  2018-01-03 21:56         ` Paul Cercueil
  0 siblings, 1 reply; 80+ messages in thread
From: Rob Herring @ 2018-01-03 21:08 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	devicetree, linux-kernel

On Mon, Jan 01, 2018 at 03:33:43PM +0100, Paul Cercueil wrote:
> This driver will use the TCU (Timer Counter Unit) present on the Ingenic
> JZ47xx SoCs to provide the kernel with a clocksource and timers.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  .../devicetree/bindings/timer/ingenic,tcu.txt      |  35 +++

Separate patch please.

>  drivers/clocksource/Kconfig                        |   8 +
>  drivers/clocksource/Makefile                       |   1 +
>  drivers/clocksource/timer-ingenic.c                | 256 +++++++++++++++++++++
>  4 files changed, 300 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>  create mode 100644 drivers/clocksource/timer-ingenic.c
> 
>  v2: Use SPDX identifier for the license
> 
> diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..e4944972ea53
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> @@ -0,0 +1,35 @@
> +Ingenic JZ47xx SoCs Timer/Counter Unit driver
> +---------------------------------------------
> +
> +Required properties:
> +
> +- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
> +  * ingenic,jz4740-tcu
> +  * ingenic,jz4770-tcu
> +  * ingenic,jz4780-tcu
> +- interrupt-parent : phandle of the TCU interrupt controller.
> +- interrupts : Specifies the interrupts the controller is connected to.
> +- clocks : List of phandle & clock specifiers for the TCU clocks.
> +- clock-names : List of name strings for the TCU clocks.
> +- ingenic,channels: a list of TCU channels to be used as timers.

Why is this needed? This looks like you are trying to assign certain 
timers to clocksource and clockevent. A common problem, but one that 
should be decided by describing h/w features. There must be some 
property present or missing to make you decide to use a given channel or 
not.

> +
> +Example:
> +
> +/ {
> +	regmap {
> +		compatible = "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +
> +		tcu: timer {
> +			compatible = "ingenic,jz4740-tcu";
> +
> +			clocks = <&tcu 0>, <&tcu 1>;
> +			clock-names = "timer0", "timer1";

It's curious that you have timer0 and timer1 here and then channels 0 
and 1 below. Would your clocks change if you use channel 2 for example? 
The binding should be a list of clock connections in the h/w, not 
just what the driver needs or what the used h/w configuration is. 

Rob

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 3/6] irqchip: Add the ingenic-tcu-intc driver
  2018-01-03 20:58         ` Rob Herring
@ 2018-01-03 21:50           ` Paul Cercueil
  0 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-01-03 21:50 UTC (permalink / raw)
  To: Rob Herring
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	devicetree, linux-kernel

Hi,


Le mer. 3 janv. 2018 à 21:58, Rob Herring <robh@kernel.org> a écrit :
> On Mon, Jan 01, 2018 at 03:33:41PM +0100, Paul Cercueil wrote:
>>  This simple driver handles the IRQ chip of the TCU
>>  (Timer Counter Unit) of the JZ47xx Ingenic SoCs.
>> 
>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  ---
>>   .../bindings/interrupt-controller/ingenic,tcu.txt  |  32 +++++
>>   drivers/irqchip/Kconfig                            |   6 +
>>   drivers/irqchip/Makefile                           |   1 +
>>   drivers/irqchip/irq-ingenic-tcu.c                  | 151 
>> +++++++++++++++++++++
>>   4 files changed, 190 insertions(+)
>>   create mode 100644 
>> Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>>   create mode 100644 drivers/irqchip/irq-ingenic-tcu.c
>> 
>>   v2: Use SPDX identifier for the license
>>       Make KConfig option select CONFIG_IRQ_DOMAIN since we depend 
>> on it
>> 
>>  diff --git 
>> a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt 
>> b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>>  new file mode 100644
>>  index 000000000000..a3e6318f8461
>>  --- /dev/null
>>  +++ 
>> b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>>  @@ -0,0 +1,32 @@
>>  +Ingenic SoCs Timer/Counter Unit Interrupt Controller
>>  +
>>  +Required properties:
>>  +
>>  +- compatible : should be "ingenic,<socname>-tcu-intc". Valid 
>> strings are:
>>  +  * ingenic,jz4740-tcu-intc
>>  +  * ingenic,jz4770-tcu-intc
>>  +  * ingenic,jz4780-tcu-intc
>>  +- interrupt-controller : Identifies the node as an interrupt 
>> controller
>>  +- #interrupt-cells : Specifies the number of cells needed to 
>> encode an
>>  +  interrupt source. The value shall be 1.
>>  +- interrupt-parent : phandle of the interrupt controller.
>>  +- interrupts : Specifies the interrupt the controller is connected 
>> to.
>>  +
>>  +Example:
>>  +
>>  +/ {
>>  +	regmap {
> 
> regmap is a Linuxism.

Should I just call it "mfd" then? (or better, "mfd@10002000")


>>  +		compatible = "simple-mfd", "syscon";
> 
> Need a specific compatible string here. Neither of these are valid by
> themselves.

So a compatible string not used by any driver? Something like 
"ingenic,tcu"?
Would I need to document it too? (it's just a simple-mfd after all)


>>  +		reg = <0x10002000 0x1000>;
>>  +
>>  +		tcu: interrupt-controller {
> 
> The TCU is only an interrupt controller?

The TCU is a multi-function silicon. It has 8 channels, each one with 
its own
interrupt line, demultiplexed from 2-3 parent IRQs (depending on the 
SoC).
The TCU IRQ driver handles this.

Each channel has a clock, that can be reparented, reclocked, and gated.
That's the job for the TCU clocks driver.

Being hardware timers, they can be used for accounting and timekeeping 
within
Linux, that's the job for the clocksource driver.

The TCU block also feeds the clocks to the watchdog and the OST (a 
separate
timer block, not handled here).

Each channel can be configured as PWM. A future patchset will convert 
the PWM
driver for Ingenic SoCs to use the TCU clocks and regmap provided by 
these
new drivers.

If your remark was only reffering to the name of the node handle, I can 
rename
it to "tcu_intc", there's no problem.

>>  +			compatible = "ingenic,jz4740-tcu-intc";
> 
> Is there a register range associated with this block? If so, add a reg
> property even if regmap doesn't need it.

Sure.

Thanks for the review!

-Paul

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 5/6] clocksource: Add a new timer-ingenic driver
  2018-01-03 21:08       ` Rob Herring
@ 2018-01-03 21:56         ` Paul Cercueil
       [not found]           ` <1515016576.1642.2-nb6JAIIttxhEPksTRSfcJOTW4wlIGRCZ@public.gmane.org>
  0 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-03 21:56 UTC (permalink / raw)
  To: Rob Herring
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones,
	linux-clk-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

Hi,

Le mer. 3 janv. 2018 à 22:08, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> a écrit :
> On Mon, Jan 01, 2018 at 03:33:43PM +0100, Paul Cercueil wrote:
>>  This driver will use the TCU (Timer Counter Unit) present on the 
>> Ingenic
>>  JZ47xx SoCs to provide the kernel with a clocksource and timers.
>> 
>>  Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
>>  ---
>>   .../devicetree/bindings/timer/ingenic,tcu.txt      |  35 +++
> 
> Separate patch please.

OK.

>>   drivers/clocksource/Kconfig                        |   8 +
>>   drivers/clocksource/Makefile                       |   1 +
>>   drivers/clocksource/timer-ingenic.c                | 256 
>> +++++++++++++++++++++
>>   4 files changed, 300 insertions(+)
>>   create mode 100644 
>> Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>   create mode 100644 drivers/clocksource/timer-ingenic.c
>> 
>>   v2: Use SPDX identifier for the license
>> 
>>  diff --git 
>> a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt 
>> b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>  new file mode 100644
>>  index 000000000000..e4944972ea53
>>  --- /dev/null
>>  +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>  @@ -0,0 +1,35 @@
>>  +Ingenic JZ47xx SoCs Timer/Counter Unit driver
>>  +---------------------------------------------
>>  +
>>  +Required properties:
>>  +
>>  +- compatible : should be "ingenic,<socname>-tcu". Valid strings 
>> are:
>>  +  * ingenic,jz4740-tcu
>>  +  * ingenic,jz4770-tcu
>>  +  * ingenic,jz4780-tcu
>>  +- interrupt-parent : phandle of the TCU interrupt controller.
>>  +- interrupts : Specifies the interrupts the controller is 
>> connected to.
>>  +- clocks : List of phandle & clock specifiers for the TCU clocks.
>>  +- clock-names : List of name strings for the TCU clocks.
>>  +- ingenic,channels: a list of TCU channels to be used as timers.
> 
> Why is this needed? This looks like you are trying to assign certain
> timers to clocksource and clockevent. A common problem, but one that
> should be decided by describing h/w features. There must be some
> property present or missing to make you decide to use a given channel 
> or
> not.

Well, it's not easy; some TCU channels will be used as PWM, and there's 
no way
to know that when the clocksource driver probes. And which ones are PWM 
/ which
ones are not, is board-specific. If you have a better solution though, 
I take it.

>>  +
>>  +Example:
>>  +
>>  +/ {
>>  +	regmap {
>>  +		compatible = "simple-mfd", "syscon";
>>  +		reg = <0x10002000 0x1000>;
>>  +
>>  +		tcu: timer {
>>  +			compatible = "ingenic,jz4740-tcu";
>>  +
>>  +			clocks = <&tcu 0>, <&tcu 1>;
>>  +			clock-names = "timer0", "timer1";
> 
> It's curious that you have timer0 and timer1 here and then channels 0
> and 1 below. Would your clocks change if you use channel 2 for 
> example?
> The binding should be a list of clock connections in the h/w, not
> just what the driver needs or what the used h/w configuration is.
> 
> Rob

I only put these to simplify the example, but you're right, I should 
have
all the timer clocks supplied there.

Thanks,
-Paul

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 5/6] clocksource: Add a new timer-ingenic driver
       [not found]           ` <1515016576.1642.2-nb6JAIIttxhEPksTRSfcJOTW4wlIGRCZ@public.gmane.org>
@ 2018-01-05 23:27             ` Rob Herring
       [not found]               ` <CAL_Jsq+DQnfX29AOJWMtH9ZB7=neOVwiyZggEuwOmazzVQ6MVg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
  0 siblings, 1 reply; 80+ messages in thread
From: Rob Herring @ 2018-01-05 23:27 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On Wed, Jan 3, 2018 at 3:56 PM, Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> wrote:
> Hi,
>
> Le mer. 3 janv. 2018 à 22:08, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> a écrit :
>>
>> On Mon, Jan 01, 2018 at 03:33:43PM +0100, Paul Cercueil wrote:
>>>
>>>  This driver will use the TCU (Timer Counter Unit) present on the Ingenic
>>>  JZ47xx SoCs to provide the kernel with a clocksource and timers.
>>>
>>>  Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
>>>  ---
>>>   .../devicetree/bindings/timer/ingenic,tcu.txt      |  35 +++
>>
>>
>> Separate patch please.
>
>
> OK.
>
>
>>>   drivers/clocksource/Kconfig                        |   8 +
>>>   drivers/clocksource/Makefile                       |   1 +
>>>   drivers/clocksource/timer-ingenic.c                | 256
>>> +++++++++++++++++++++
>>>   4 files changed, 300 insertions(+)
>>>   create mode 100644
>>> Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>   create mode 100644 drivers/clocksource/timer-ingenic.c
>>>
>>>   v2: Use SPDX identifier for the license
>>>
>>>  diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>> b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>  new file mode 100644
>>>  index 000000000000..e4944972ea53
>>>  --- /dev/null
>>>  +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>  @@ -0,0 +1,35 @@
>>>  +Ingenic JZ47xx SoCs Timer/Counter Unit driver
>>>  +---------------------------------------------
>>>  +
>>>  +Required properties:
>>>  +
>>>  +- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
>>>  +  * ingenic,jz4740-tcu
>>>  +  * ingenic,jz4770-tcu
>>>  +  * ingenic,jz4780-tcu
>>>  +- interrupt-parent : phandle of the TCU interrupt controller.
>>>  +- interrupts : Specifies the interrupts the controller is connected to.
>>>  +- clocks : List of phandle & clock specifiers for the TCU clocks.
>>>  +- clock-names : List of name strings for the TCU clocks.
>>>  +- ingenic,channels: a list of TCU channels to be used as timers.
>>
>>
>> Why is this needed? This looks like you are trying to assign certain
>> timers to clocksource and clockevent. A common problem, but one that
>> should be decided by describing h/w features. There must be some
>> property present or missing to make you decide to use a given channel or
>> not.
>
>
> Well, it's not easy; some TCU channels will be used as PWM, and there's no
> way
> to know that when the clocksource driver probes. And which ones are PWM /
> which
> ones are not, is board-specific. If you have a better solution though, I
> take it.

Aren't the PWMs connected to something? Describe those in DT and then
you can find the free ones.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 5/6] clocksource: Add a new timer-ingenic driver
       [not found]               ` <CAL_Jsq+DQnfX29AOJWMtH9ZB7=neOVwiyZggEuwOmazzVQ6MVg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2018-01-05 23:48                 ` Paul Cercueil
       [not found]                   ` <1515196105.2058.1-nb6JAIIttxhEPksTRSfcJOTW4wlIGRCZ@public.gmane.org>
  0 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-05 23:48 UTC (permalink / raw)
  To: Rob Herring
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

Hi Rob,

Le sam. 6 janv. 2018 à 0:27, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> a écrit :
> On Wed, Jan 3, 2018 at 3:56 PM, Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> 
> wrote:
>>  Hi,
>> 
>>  Le mer. 3 janv. 2018 à 22:08, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> a 
>> écrit :
>>> 
>>>  On Mon, Jan 01, 2018 at 03:33:43PM +0100, Paul Cercueil wrote:
>>>> 
>>>>   This driver will use the TCU (Timer Counter Unit) present on the 
>>>> Ingenic
>>>>   JZ47xx SoCs to provide the kernel with a clocksource and timers.
>>>> 
>>>>   Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
>>>>   ---
>>>>    .../devicetree/bindings/timer/ingenic,tcu.txt      |  35 +++
>>> 
>>> 
>>>  Separate patch please.
>> 
>> 
>>  OK.
>> 
>> 
>>>>    drivers/clocksource/Kconfig                        |   8 +
>>>>    drivers/clocksource/Makefile                       |   1 +
>>>>    drivers/clocksource/timer-ingenic.c                | 256
>>>>  +++++++++++++++++++++
>>>>    4 files changed, 300 insertions(+)
>>>>    create mode 100644
>>>>  Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>>    create mode 100644 drivers/clocksource/timer-ingenic.c
>>>> 
>>>>    v2: Use SPDX identifier for the license
>>>> 
>>>>   diff --git 
>>>> a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>>  b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>>   new file mode 100644
>>>>   index 000000000000..e4944972ea53
>>>>   --- /dev/null
>>>>   +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>>   @@ -0,0 +1,35 @@
>>>>   +Ingenic JZ47xx SoCs Timer/Counter Unit driver
>>>>   +---------------------------------------------
>>>>   +
>>>>   +Required properties:
>>>>   +
>>>>   +- compatible : should be "ingenic,<socname>-tcu". Valid strings 
>>>> are:
>>>>   +  * ingenic,jz4740-tcu
>>>>   +  * ingenic,jz4770-tcu
>>>>   +  * ingenic,jz4780-tcu
>>>>   +- interrupt-parent : phandle of the TCU interrupt controller.
>>>>   +- interrupts : Specifies the interrupts the controller is 
>>>> connected to.
>>>>   +- clocks : List of phandle & clock specifiers for the TCU 
>>>> clocks.
>>>>   +- clock-names : List of name strings for the TCU clocks.
>>>>   +- ingenic,channels: a list of TCU channels to be used as timers.
>>> 
>>> 
>>>  Why is this needed? This looks like you are trying to assign 
>>> certain
>>>  timers to clocksource and clockevent. A common problem, but one 
>>> that
>>>  should be decided by describing h/w features. There must be some
>>>  property present or missing to make you decide to use a given 
>>> channel or
>>>  not.
>> 
>> 
>>  Well, it's not easy; some TCU channels will be used as PWM, and 
>> there's no
>>  way
>>  to know that when the clocksource driver probes. And which ones are 
>> PWM /
>>  which
>>  ones are not, is board-specific. If you have a better solution 
>> though, I
>>  take it.
> 
> Aren't the PWMs connected to something? Describe those in DT and then
> you can find the free ones.
> 
> Rob

The ingenic PWM driver just creates a PWM chip with 8 channels. Then 
it's up to
the various clients (backlight, rumble...) to request a channel using 
the PWM API,
from their own driver node or pdata. Besides you can also request PWM 
channels
from sysfs... I can't detect all of that...

Paul

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v2 5/6] clocksource: Add a new timer-ingenic driver
       [not found]                   ` <1515196105.2058.1-nb6JAIIttxhEPksTRSfcJOTW4wlIGRCZ@public.gmane.org>
@ 2018-01-09  1:09                     ` Rob Herring
  0 siblings, 0 replies; 80+ messages in thread
From: Rob Herring @ 2018-01-09  1:09 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On Fri, Jan 5, 2018 at 5:48 PM, Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> wrote:
> Hi Rob,
>
>
> Le sam. 6 janv. 2018 à 0:27, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> a écrit :
>>
>> On Wed, Jan 3, 2018 at 3:56 PM, Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
>> wrote:
>>>
>>>  Hi,
>>>
>>>  Le mer. 3 janv. 2018 à 22:08, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> a écrit :
>>>>
>>>>
>>>>  On Mon, Jan 01, 2018 at 03:33:43PM +0100, Paul Cercueil wrote:
>>>>>
>>>>>
>>>>>   This driver will use the TCU (Timer Counter Unit) present on the
>>>>> Ingenic
>>>>>   JZ47xx SoCs to provide the kernel with a clocksource and timers.
>>>>>
>>>>>   Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
>>>>>   ---
>>>>>    .../devicetree/bindings/timer/ingenic,tcu.txt      |  35 +++
>>>>
>>>>
>>>>
>>>>  Separate patch please.
>>>
>>>
>>>
>>>  OK.
>>>
>>>
>>>>>    drivers/clocksource/Kconfig                        |   8 +
>>>>>    drivers/clocksource/Makefile                       |   1 +
>>>>>    drivers/clocksource/timer-ingenic.c                | 256
>>>>>  +++++++++++++++++++++
>>>>>    4 files changed, 300 insertions(+)
>>>>>    create mode 100644
>>>>>  Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>>>    create mode 100644 drivers/clocksource/timer-ingenic.c
>>>>>
>>>>>    v2: Use SPDX identifier for the license
>>>>>
>>>>>   diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>>>  b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>>>   new file mode 100644
>>>>>   index 000000000000..e4944972ea53
>>>>>   --- /dev/null
>>>>>   +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>>>   @@ -0,0 +1,35 @@
>>>>>   +Ingenic JZ47xx SoCs Timer/Counter Unit driver
>>>>>   +---------------------------------------------
>>>>>   +
>>>>>   +Required properties:
>>>>>   +
>>>>>   +- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
>>>>>   +  * ingenic,jz4740-tcu
>>>>>   +  * ingenic,jz4770-tcu
>>>>>   +  * ingenic,jz4780-tcu
>>>>>   +- interrupt-parent : phandle of the TCU interrupt controller.
>>>>>   +- interrupts : Specifies the interrupts the controller is connected
>>>>> to.
>>>>>   +- clocks : List of phandle & clock specifiers for the TCU clocks.
>>>>>   +- clock-names : List of name strings for the TCU clocks.
>>>>>   +- ingenic,channels: a list of TCU channels to be used as timers.
>>>>
>>>>
>>>>
>>>>  Why is this needed? This looks like you are trying to assign certain
>>>>  timers to clocksource and clockevent. A common problem, but one that
>>>>  should be decided by describing h/w features. There must be some
>>>>  property present or missing to make you decide to use a given channel
>>>> or
>>>>  not.
>>>
>>>
>>>
>>>  Well, it's not easy; some TCU channels will be used as PWM, and there's
>>> no
>>>  way
>>>  to know that when the clocksource driver probes. And which ones are PWM
>>> /
>>>  which
>>>  ones are not, is board-specific. If you have a better solution though, I
>>>  take it.
>>
>>
>> Aren't the PWMs connected to something? Describe those in DT and then
>> you can find the free ones.
>>
>> Rob
>
>
> The ingenic PWM driver just creates a PWM chip with 8 channels. Then it's up
> to
> the various clients (backlight, rumble...) to request a channel using the
> PWM API,
> from their own driver node or pdata. Besides you can also request PWM
> channels
> from sysfs... I can't detect all of that...

You are describing things in terms of kernel implementation details.
Bindings should reflect the h/w design and be independent of the OS
design.

Backlight, rumble, etc. should all have clients described in DT. While
not efficient, you can iterate over all "pwms" properties in the DT
and map out the used channels. For userspace, it should get whatever
is left over (not used as a timer nor PWM requested by a kernel
driver)

You need to think about it in terms of what feature each channel has
or doesn't have. For example, I'm using PWM channel 2 because that
drives PWM2 pin which is enabled on board X (either the pin mode or
the connection of the PWM signal should be described). Or I'm using
timer 3 because it runs in low-power mode (then you have an "enabled
in low power" flag for that timer/channel). See the OMAP timers for an
example of having multiple timers and needing to pick certain ones.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* [PATCH v3 1/9] mfd: syscon: Add ingenic-tcu.h header
  2018-01-01 14:33   ` [PATCH v2 " Paul Cercueil
                       ` (5 preceding siblings ...)
  2018-01-02 15:51     ` [PATCH v2 1/6] mfd: syscon: Add ingenic-tcu.h header Lee Jones
@ 2018-01-10 22:48     ` Paul Cercueil
  2018-01-10 22:48       ` [PATCH v3 3/9] doc: dt-bindings: Add doc for Ingenic TCU IRQ driver Paul Cercueil
                         ` (7 more replies)
  6 siblings, 8 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-01-10 22:48 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, devicetree, linux-kernel, Paul Cercueil

This header contains macros for the registers that are present in the
regmap shared by all the drivers related to the TCU (Timer Counter Unit)
of the Ingenic JZ47xx SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 include/linux/mfd/syscon/ingenic-tcu.h | 54 ++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 include/linux/mfd/syscon/ingenic-tcu.h

 v2: Use SPDX identifier for the license
 v3: - Use macros instead of enum
     - Add 'TCU_' at the beginning of each macro
	 - Remove useless include <linux/regmap.h>

diff --git a/include/linux/mfd/syscon/ingenic-tcu.h b/include/linux/mfd/syscon/ingenic-tcu.h
new file mode 100644
index 000000000000..96dd59f7c3b2
--- /dev/null
+++ b/include/linux/mfd/syscon/ingenic-tcu.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Header file for the Ingenic JZ47xx TCU driver
+ */
+#ifndef __LINUX_CLK_INGENIC_TCU_H_
+#define __LINUX_CLK_INGENIC_TCU_H_
+
+#include <linux/bitops.h>
+
+#define TCU_REG_WDT_TDR		0x00
+#define TCU_REG_WDT_TCER	0x04
+#define TCU_REG_WDT_TCNT	0x08
+#define TCU_REG_WDT_TCSR	0x0c
+#define TCU_REG_TER		0x10
+#define TCU_REG_TESR		0x14
+#define TCU_REG_TECR		0x18
+#define TCU_REG_TSR		0x1c
+#define TCU_REG_TFR		0x20
+#define TCU_REG_TFSR		0x24
+#define TCU_REG_TFCR		0x28
+#define TCU_REG_TSSR		0x2c
+#define TCU_REG_TMR		0x30
+#define TCU_REG_TMSR		0x34
+#define TCU_REG_TMCR		0x38
+#define TCU_REG_TSCR		0x3c
+#define TCU_REG_TDFR0		0x40
+#define TCU_REG_TDHR0		0x44
+#define TCU_REG_TCNT0		0x48
+#define TCU_REG_TCSR0		0x4c
+#define TCU_REG_OST_DR		0xe0
+#define TCU_REG_OST_CNTL	0xe4
+#define TCU_REG_OST_CNTH	0xe8
+#define TCU_REG_OST_TCSR	0xec
+#define TCU_REG_TSTR		0xf0
+#define TCU_REG_TSTSR		0xf4
+#define TCU_REG_TSTCR		0xf8
+#define TCU_REG_OST_CNTHBUF	0xfc
+
+#define TCU_TCSR_RESERVED_BITS		0x3f
+#define TCU_TCSR_PARENT_CLOCK_MASK	0x07
+#define TCU_TCSR_PRESCALE_LSB		3
+#define TCU_TCSR_PRESCALE_MASK		0x38
+
+#define TCU_TCSR_PWM_SD		BIT(9)	/* 0: Shutdown abruptly 1: gracefully */
+#define TCU_TCSR_PWM_INITL_HIGH	BIT(8)	/* Sets the initial output level */
+#define TCU_TCSR_PWM_EN		BIT(7)	/* PWM pin output enable */
+
+#define TCU_CHANNEL_STRIDE	0x10
+#define TCU_REG_TDFRc(c)	(TCU_REG_TDFR0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TDHRc(c)	(TCU_REG_TDHR0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TCNTc(c)	(TCU_REG_TCNT0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TCSRc(c)	(TCU_REG_TCSR0 + ((c) * TCU_CHANNEL_STRIDE))
+
+#endif /* __LINUX_CLK_INGENIC_TCU_H_ */
-- 
2.11.0


^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v3 2/9] dt-bindings: ingenic: Add DT bindings for TCU clocks
       [not found]       ` <20180110224838.16711-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
@ 2018-01-10 22:48         ` Paul Cercueil
  2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
  2018-01-23  9:52         ` [PATCH v3 1/9] mfd: syscon: Add ingenic-tcu.h header Lee Jones
  1 sibling, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-10 22:48 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Paul Cercueil

This header provides clock numbers for the ingenic,tcu
DT binding.

Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 include/dt-bindings/clock/ingenic,tcu.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 include/dt-bindings/clock/ingenic,tcu.h

 v2: Use SPDX identifier for the license
 v3: No change

diff --git a/include/dt-bindings/clock/ingenic,tcu.h b/include/dt-bindings/clock/ingenic,tcu.h
new file mode 100644
index 000000000000..179815d7b3bb
--- /dev/null
+++ b/include/dt-bindings/clock/ingenic,tcu.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,tcu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+#define __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+
+#define JZ4740_CLK_TIMER0	0
+#define JZ4740_CLK_TIMER1	1
+#define JZ4740_CLK_TIMER2	2
+#define JZ4740_CLK_TIMER3	3
+#define JZ4740_CLK_TIMER4	4
+#define JZ4740_CLK_TIMER5	5
+#define JZ4740_CLK_TIMER6	6
+#define JZ4740_CLK_TIMER7	7
+#define JZ4740_CLK_WDT		8
+#define JZ4740_CLK_LAST		JZ4740_CLK_WDT
+
+#define JZ4770_CLK_OST		9
+#define JZ4770_CLK_LAST		JZ4770_CLK_OST
+
+#endif /* __DT_BINDINGS_CLOCK_INGENIC_TCU_H__ */
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v3 3/9] doc: dt-bindings: Add doc for Ingenic TCU IRQ driver
  2018-01-10 22:48     ` [PATCH v3 1/9] " Paul Cercueil
@ 2018-01-10 22:48       ` Paul Cercueil
       [not found]         ` <20180110224838.16711-3-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
  2018-01-10 22:48       ` [PATCH v3 4/9] doc: dt-bindings: Add doc for the Ingenic TCU clocks driver Paul Cercueil
                         ` (6 subsequent siblings)
  7 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-10 22:48 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, devicetree, linux-kernel, Paul Cercueil

Add documentation about how to properly use the Ingenic TCU
(Timer/Counter Unit) IRQ driver from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/interrupt-controller/ingenic,tcu.txt  | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt

 v3: New patch in this series

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
new file mode 100644
index 000000000000..e3a7d2354172
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
@@ -0,0 +1,33 @@
+Ingenic SoCs Timer/Counter Unit Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
+  * ingenic,jz4740-tcu-intc
+  * ingenic,jz4770-tcu-intc
+  * ingenic,jz4780-tcu-intc
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+- interrupt-parent : phandle of the interrupt controller.
+- interrupts : Specifies the interrupt the controller is connected to.
+
+Example:
+
+/ {
+	mfd@10002000 {
+		compatible = "ingenic,tcu", "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu_irq: interrupt-controller {
+			compatible = "ingenic,jz4740-tcu-intc";
+			reg = <0x10002020 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+	};
+};
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v3 4/9] doc: dt-bindings: Add doc for the Ingenic TCU clocks driver
  2018-01-10 22:48     ` [PATCH v3 1/9] " Paul Cercueil
  2018-01-10 22:48       ` [PATCH v3 3/9] doc: dt-bindings: Add doc for Ingenic TCU IRQ driver Paul Cercueil
@ 2018-01-10 22:48       ` Paul Cercueil
       [not found]         ` <20180110224838.16711-4-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
  2018-01-10 22:48       ` [PATCH v3 5/9] doc: dt-bindings: Add doc for the Ingenic TCU timers driver Paul Cercueil
                         ` (5 subsequent siblings)
  7 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-10 22:48 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, devicetree, linux-kernel, Paul Cercueil

Add documentation about how to properly use the Ingenic TCU
(Timer/Counter Unit) clocks driver from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/clock/ingenic,tcu-clocks.txt          | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt

 v3: New patch in this series

diff --git a/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
new file mode 100644
index 000000000000..90bb30e07b86
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
@@ -0,0 +1,36 @@
+Ingenic SoC TCU binding
+
+The TCU is the Timer/Counter Unit present in all Ingenic SoCs. It features 8
+channels, each one having its own clock, that can be started and stopped,
+reparented, and reclocked.
+
+Required properties:
+- compatible : One of:
+  * ingenic,jz4740-tcu-clocks,
+  * ingenic,jz4770-tcu-clocks,
+  * ingenic,jz4780-tcu-clocks.
+- clocks : List of phandle & clock specifiers for clocks external to the TCU.
+  The "pclk", "rtc" and "ext" clocks should be provided.
+- clock-names : List of name strings for the external clocks.
+- #clock-cells: Should be 1.
+  Clock consumers specify this argument to identify a clock. The valid values
+  may be found in <dt-bindings/clock/ingenic,tcu.h>.
+
+Example:
+
+/ {
+	mfd@10002000 {
+		compatible = "ingenic,tcu", "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu_clk: clocks {
+			compatible = "ingenic,jz4740-tcu-clocks";
+			reg = <0x10002010 0xFF0>;
+
+			clocks = <&ext>, <&rtc>, <&pclk>;
+			clock-names = "ext", "rtc", "pclk";
+
+			#clock-cells = <1>;
+		};
+	};
+};
-- 
2.11.0


^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v3 5/9] doc: dt-bindings: Add doc for the Ingenic TCU timers driver
  2018-01-10 22:48     ` [PATCH v3 1/9] " Paul Cercueil
  2018-01-10 22:48       ` [PATCH v3 3/9] doc: dt-bindings: Add doc for Ingenic TCU IRQ driver Paul Cercueil
  2018-01-10 22:48       ` [PATCH v3 4/9] doc: dt-bindings: Add doc for the Ingenic TCU clocks driver Paul Cercueil
@ 2018-01-10 22:48       ` Paul Cercueil
  2018-01-19 21:12         ` Rob Herring
  2018-01-10 22:48       ` [PATCH v3 6/9] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
                         ` (4 subsequent siblings)
  7 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-10 22:48 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, devicetree, linux-kernel, Paul Cercueil

Add documentation about how to properly use the Ingenic TCU
(Timer/Counter Unit) timers driver from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../devicetree/bindings/timer/ingenic,tcu.txt      | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt

 v3: New patch in this series

diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
new file mode 100644
index 000000000000..dd76877efb8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
@@ -0,0 +1,35 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit driver
+---------------------------------------------
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
+  * ingenic,jz4740-tcu
+  * ingenic,jz4770-tcu
+  * ingenic,jz4780-tcu
+- interrupt-parent : phandle of the TCU interrupt controller.
+- interrupts : Specifies the interrupts the controller is connected to.
+- clocks : List of phandle & clock specifiers for the TCU clocks.
+- clock-names : List of name strings for the TCU clocks.
+
+Example:
+
+/ {
+	mfd@10002000 {
+		compatible = "ingenic,tcu", "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu_timer: timer {
+			compatible = "ingenic,jz4740-tcu";
+			reg = <0x10002010 0xFF0>;
+
+			clocks = <&tcu 0>, <&tcu 1>, <&tcu 2>, <&tcu 3>,
+					 <&tcu 4>, <&tcu 5>, <&tcu 6>, <&tcu 7>;
+			clock-names = "timer0", "timer1", "timer2", "timer3",
+						  "timer4", "timer5", "timer6", "timer7";
+
+			interrupt-parent = <&tcu>;
+			interrupts = <0 1 2 3 4 5 6 7>;
+		};
+	};
+};
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v3 6/9] irqchip: Add the ingenic-tcu-intc driver
  2018-01-10 22:48     ` [PATCH v3 1/9] " Paul Cercueil
                         ` (2 preceding siblings ...)
  2018-01-10 22:48       ` [PATCH v3 5/9] doc: dt-bindings: Add doc for the Ingenic TCU timers driver Paul Cercueil
@ 2018-01-10 22:48       ` Paul Cercueil
       [not found]         ` <20180110224838.16711-6-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
  2018-01-10 22:48       ` [PATCH v3 7/9] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
                         ` (3 subsequent siblings)
  7 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-10 22:48 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, devicetree, linux-kernel, Paul Cercueil

This simple driver handles the IRQ chip of the TCU
(Timer Counter Unit) of the JZ47xx Ingenic SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/irqchip/Kconfig           |   6 ++
 drivers/irqchip/Makefile          |   1 +
 drivers/irqchip/irq-ingenic-tcu.c | 153 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 160 insertions(+)
 create mode 100644 drivers/irqchip/irq-ingenic-tcu.c

 v2: - Use SPDX identifier for the license
     - Make KConfig option select CONFIG_IRQ_DOMAIN since we depend on it
 v3: - Move documentation to its own patch
     - Add comment explaining why we only use IRQCHIP_DECLARE

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index c70476b34a53..74668f3605b0 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -267,6 +267,12 @@ config INGENIC_IRQ
 	depends on MACH_INGENIC
 	default y
 
+config INGENIC_TCU_IRQ
+	bool
+	depends on MACH_INGENIC || COMPILE_TEST
+	select IRQ_DOMAIN
+	default y
+
 config RENESAS_H8300H_INTC
         bool
 	select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index d2df34a54d38..6effe0271cd6 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_RENESAS_H8300H_INTC)	+= irq-renesas-h8300h.o
 obj-$(CONFIG_RENESAS_H8S_INTC)		+= irq-renesas-h8s.o
 obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
 obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
+obj-$(CONFIG_INGENIC_TCU_IRQ)		+= irq-ingenic-tcu.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
 obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
diff --git a/drivers/irqchip/irq-ingenic-tcu.c b/drivers/irqchip/irq-ingenic-tcu.c
new file mode 100644
index 000000000000..52e9688b31f6
--- /dev/null
+++ b/drivers/irqchip/irq-ingenic-tcu.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU IRQ driver
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/syscon/ingenic-tcu.h>
+
+static void ingenic_tcu_intc_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
+	struct irq_domain *domain = irq_desc_get_handler_data(desc);
+	struct irq_chip_generic *gc = irq_get_domain_generic_chip(domain, 0);
+	struct regmap *map = gc->private;
+	uint32_t irq_reg, irq_mask;
+	unsigned int i;
+
+	regmap_read(map, TCU_REG_TFR, &irq_reg);
+	regmap_read(map, TCU_REG_TMR, &irq_mask);
+
+	chained_irq_enter(irq_chip, desc);
+
+	irq_reg &= ~irq_mask;
+
+	for (i = 0; i < 32; i++) {
+		if (irq_reg & BIT(i))
+			generic_handle_irq(irq_linear_revmap(domain, i));
+	}
+
+	chained_irq_exit(irq_chip, desc);
+}
+
+static void ingenic_tcu_gc_unmask_enable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.ack, mask);
+	regmap_write(map, ct->regs.enable, mask);
+	*ct->mask_cache |= mask;
+	irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.disable, mask);
+	*ct->mask_cache &= ~mask;
+	irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg_and_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.ack, mask);
+	regmap_write(map, ct->regs.disable, mask);
+	irq_gc_unlock(gc);
+}
+
+static int __init ingenic_tcu_intc_of_init(struct device_node *node,
+	struct device_node *parent)
+{
+	struct irq_domain *domain;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	int err, i, num_parent_irqs;
+	unsigned int parent_irqs[3];
+	struct regmap *map;
+
+	num_parent_irqs = of_property_count_elems_of_size(
+			node, "interrupts", 4);
+	if (num_parent_irqs < 0 || num_parent_irqs > ARRAY_SIZE(parent_irqs))
+		return -EINVAL;
+
+	map = syscon_node_to_regmap(node->parent);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops, NULL);
+	if (!domain)
+		return -ENOMEM;
+
+	err = irq_alloc_domain_generic_chips(domain, 32, 1, "TCU",
+			handle_level_irq, 0, IRQ_NOPROBE | IRQ_LEVEL, 0);
+	if (err)
+		goto out_domain_remove;
+
+	gc = irq_get_domain_generic_chip(domain, 0);
+	ct = gc->chip_types;
+
+	gc->wake_enabled = IRQ_MSK(32);
+	gc->private = map;
+
+	ct->regs.disable = TCU_REG_TMSR;
+	ct->regs.enable = TCU_REG_TMCR;
+	ct->regs.ack = TCU_REG_TFCR;
+	ct->chip.irq_unmask = ingenic_tcu_gc_unmask_enable_reg;
+	ct->chip.irq_mask = ingenic_tcu_gc_mask_disable_reg;
+	ct->chip.irq_mask_ack = ingenic_tcu_gc_mask_disable_reg_and_ack;
+	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
+
+	/* Mask all IRQs by default */
+	regmap_write(map, TCU_REG_TMSR, IRQ_MSK(32));
+
+	for (i = 0; i < num_parent_irqs; i++) {
+		parent_irqs[i] = irq_of_parse_and_map(node, i);
+		if (!parent_irqs[i]) {
+			err = -EINVAL;
+			goto out_unmap_irqs;
+		}
+
+		irq_set_chained_handler_and_data(parent_irqs[i],
+				ingenic_tcu_intc_cascade, domain);
+	}
+
+	return 0;
+
+out_unmap_irqs:
+	for (; i > 0; i--)
+		irq_dispose_mapping(parent_irqs[i - 1]);
+out_domain_remove:
+	irq_domain_remove(domain);
+	return err;
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+IRQCHIP_DECLARE(jz4740_tcu_intc, "ingenic,jz4740-tcu-intc",
+		ingenic_tcu_intc_of_init);
+IRQCHIP_DECLARE(jz4770_tcu_intc, "ingenic,jz4770-tcu-intc",
+		ingenic_tcu_intc_of_init);
+IRQCHIP_DECLARE(jz4780_tcu_intc, "ingenic,jz4780-tcu-intc",
+		ingenic_tcu_intc_of_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v3 7/9] clk: ingenic: Add JZ47xx TCU clocks driver
  2018-01-10 22:48     ` [PATCH v3 1/9] " Paul Cercueil
                         ` (3 preceding siblings ...)
  2018-01-10 22:48       ` [PATCH v3 6/9] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
@ 2018-01-10 22:48       ` Paul Cercueil
       [not found]         ` <20180110224838.16711-7-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
  2018-01-10 22:48       ` [PATCH v3 8/9] clocksource: Add a new timer-ingenic driver Paul Cercueil
                         ` (2 subsequent siblings)
  7 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-10 22:48 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, devicetree, linux-kernel, Paul Cercueil

The TCU (Timer Counter Unit) of the Ingenic JZ47xx SoCs features 8
channels, each one having its own clock, that can be started and
stopped, reparented, and reclocked.

This driver only modifies the bits of the registers of the TCU that are
related to clocks control. It provides one clock per TCU channel (plus
one for the watchdog and one for the OS timer) that can be used by other
drivers.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/clk/ingenic/Makefile |   2 +-
 drivers/clk/ingenic/tcu.c    | 319 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 320 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ingenic/tcu.c

 v2: - Use SPDX identifier for the license
     - Fix broken build caused by typo when correcting patch
 v3: - Move documentation to its own patch
     - Get rid of ingenic_tcu structure. The "struct regmap *map" was
	   added to struct ingenic_tcu_clk, the other fields are gone.
	 - Replace clk_register / clk_register_clockdev /
	   of_clk_add_provider with their "clk_hw" variant.

diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index cd47b0664c2b..e373118a3726 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -1,3 +1,3 @@
-obj-y				+= cgu.o
+obj-y				+= cgu.o tcu.o
 obj-$(CONFIG_MACH_JZ4740)	+= jz4740-cgu.o
 obj-$(CONFIG_MACH_JZ4780)	+= jz4780-cgu.o
diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
new file mode 100644
index 000000000000..b550b6ac8fb4
--- /dev/null
+++ b/drivers/clk/ingenic/tcu.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx SoC TCU clocks driver
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/ingenic-tcu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+enum ingenic_version {
+	ID_JZ4740,
+	ID_JZ4770,
+	ID_JZ4780,
+};
+
+struct ingenic_tcu_clk_info {
+	struct clk_init_data init_data;
+	u8 gate_bit;
+	u8 tcsr_reg;
+};
+
+struct ingenic_tcu_clk {
+	struct clk_hw hw;
+
+	struct regmap *map;
+	const struct ingenic_tcu_clk_info *info;
+
+	unsigned int idx;
+};
+
+#define to_tcu_clk(_hw) container_of(_hw, struct ingenic_tcu_clk, hw)
+
+static int ingenic_tcu_enable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+
+	regmap_write(tcu_clk->map, TCU_REG_TSCR, BIT(info->gate_bit));
+	return 0;
+}
+
+static void ingenic_tcu_disable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+
+	regmap_write(tcu_clk->map, TCU_REG_TSSR, BIT(info->gate_bit));
+}
+
+static int ingenic_tcu_is_enabled(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int value;
+
+	regmap_read(tcu_clk->map, TCU_REG_TSR, &value);
+
+	return !(value & BIT(info->gate_bit));
+}
+
+static u8 ingenic_tcu_get_parent(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int val = 0;
+	int ret;
+
+	ret = regmap_read(tcu_clk->map, info->tcsr_reg, &val);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	return ffs(val & TCU_TCSR_PARENT_CLOCK_MASK) - 1;
+}
+
+static int ingenic_tcu_set_parent(struct clk_hw *hw, u8 idx)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct regmap *map = tcu_clk->map;
+	int ret;
+
+	/*
+	 * Our clock provider has the CLK_SET_PARENT_GATE flag set, so we know
+	 * that the clk is in unprepared state. To be able to access TCSR
+	 * we must ungate the clock supply and we gate it again when done.
+	 */
+
+	regmap_write(map, TCU_REG_TSCR, BIT(info->gate_bit));
+
+	ret = regmap_update_bits(map, info->tcsr_reg,
+			TCU_TCSR_PARENT_CLOCK_MASK, BIT(idx));
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	regmap_write(map, TCU_REG_TSSR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static unsigned long ingenic_tcu_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int prescale;
+	int ret;
+
+	ret = regmap_read(tcu_clk->map, info->tcsr_reg, &prescale);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	prescale = (prescale & TCU_TCSR_PRESCALE_MASK) >> TCU_TCSR_PRESCALE_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long *parent_rate)
+{
+	unsigned long rate = *parent_rate;
+	unsigned int shift;
+
+	if (req_rate > rate)
+		return -EINVAL;
+
+	for (shift = 0; shift < 10; shift += 2)
+		if ((rate >> shift) <= req_rate)
+			break;
+
+	return rate >> shift;
+}
+
+static int ingenic_tcu_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct regmap *map = tcu_clk->map;
+	u8 prescale = (ffs(parent_rate / req_rate) / 2)
+			<< TCU_TCSR_PRESCALE_LSB;
+	int ret;
+
+	/*
+	 * Our clock provider has the CLK_SET_RATE_GATE flag set, so we know
+	 * that the clk is in unprepared state. To be able to access TCSR
+	 * we must ungate the clock supply and we gate it again when done.
+	 */
+
+	regmap_write(map, TCU_REG_TSCR, BIT(info->gate_bit));
+
+	ret = regmap_update_bits(map, info->tcsr_reg,
+				TCU_TCSR_PRESCALE_MASK, prescale);
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	regmap_write(map, TCU_REG_TSSR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static const struct clk_ops ingenic_tcu_clk_ops = {
+	.get_parent	= ingenic_tcu_get_parent,
+	.set_parent	= ingenic_tcu_set_parent,
+
+	.recalc_rate	= ingenic_tcu_recalc_rate,
+	.round_rate	= ingenic_tcu_round_rate,
+	.set_rate	= ingenic_tcu_set_rate,
+
+	.enable		= ingenic_tcu_enable,
+	.disable	= ingenic_tcu_disable,
+	.is_enabled	= ingenic_tcu_is_enabled,
+};
+
+static const char * const ingenic_tcu_timer_parents[] = {
+	"pclk",
+	"rtc",
+	"ext",
+};
+
+static const struct ingenic_tcu_clk_info ingenic_tcu_clk_info[] = {
+#define DEF_TIMER(_name, _gate_bit, _tcsr)				\
+	{								\
+		.init_data = {						\
+			.name = _name,					\
+			.parent_names = ingenic_tcu_timer_parents,	\
+			.num_parents = ARRAY_SIZE(ingenic_tcu_timer_parents),\
+			.ops = &ingenic_tcu_clk_ops,			\
+			.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE,\
+		},							\
+		.gate_bit = _gate_bit,					\
+		.tcsr_reg = _tcsr,					\
+	}
+	[JZ4740_CLK_TIMER0] = DEF_TIMER("timer0", 0, TCU_REG_TCSRc(0)),
+	[JZ4740_CLK_TIMER1] = DEF_TIMER("timer1", 1, TCU_REG_TCSRc(1)),
+	[JZ4740_CLK_TIMER2] = DEF_TIMER("timer2", 2, TCU_REG_TCSRc(2)),
+	[JZ4740_CLK_TIMER3] = DEF_TIMER("timer3", 3, TCU_REG_TCSRc(3)),
+	[JZ4740_CLK_TIMER4] = DEF_TIMER("timer4", 4, TCU_REG_TCSRc(4)),
+	[JZ4740_CLK_TIMER5] = DEF_TIMER("timer5", 5, TCU_REG_TCSRc(5)),
+	[JZ4740_CLK_TIMER6] = DEF_TIMER("timer6", 6, TCU_REG_TCSRc(6)),
+	[JZ4740_CLK_TIMER7] = DEF_TIMER("timer7", 7, TCU_REG_TCSRc(7)),
+	[JZ4740_CLK_WDT]    = DEF_TIMER("wdt",   16, TCU_REG_WDT_TCSR),
+	[JZ4770_CLK_OST]    = DEF_TIMER("ost",   15, TCU_REG_OST_TCSR),
+#undef DEF_TIMER
+};
+
+static int ingenic_tcu_register_clock(struct regmap *map, unsigned int idx,
+		const struct ingenic_tcu_clk_info *info,
+		struct clk_hw_onecell_data *clocks)
+{
+	struct ingenic_tcu_clk *tcu_clk;
+	int err;
+
+	tcu_clk = kzalloc(sizeof(*tcu_clk), GFP_KERNEL);
+	if (!tcu_clk)
+		return -ENOMEM;
+
+	tcu_clk->hw.init = &info->init_data;
+	tcu_clk->idx = idx;
+	tcu_clk->info = info;
+	tcu_clk->map = map;
+
+	/* Set EXT as the default parent clock */
+	ingenic_tcu_set_parent(&tcu_clk->hw, 2);
+
+	ingenic_tcu_disable(&tcu_clk->hw);
+
+	err = clk_hw_register(NULL, &tcu_clk->hw);
+	if (err)
+		goto err_free_tcu_clk;
+
+	err = clk_hw_register_clkdev(&tcu_clk->hw, info->init_data.name, NULL);
+	if (err)
+		goto err_clk_unregister;
+
+	clocks->hws[idx] = &tcu_clk->hw;
+	return 0;
+
+err_clk_unregister:
+	clk_hw_unregister(&tcu_clk->hw);
+err_free_tcu_clk:
+	kfree(tcu_clk);
+	return err;
+}
+
+static void __init ingenic_tcu_init(struct device_node *np,
+		enum ingenic_version id)
+{
+	struct clk_hw_onecell_data *clocks;
+	struct regmap *map;
+	size_t i, nb_clks;
+	int ret = -ENOMEM;
+
+	if (id >= ID_JZ4770)
+		nb_clks = (JZ4770_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
+	else
+		nb_clks = (JZ4740_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
+
+	map = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(map)) {
+		pr_err("%s: failed to map TCU registers\n", __func__);
+		return;
+	}
+
+	clocks = kzalloc(sizeof(*clocks) +
+					 sizeof(*clocks->hws) * nb_clks,
+					 GFP_KERNEL);
+	if (!clocks)
+		return;
+
+	clocks->num = nb_clks;
+
+	for (i = 0; i < nb_clks; i++) {
+		ret = ingenic_tcu_register_clock(map, i,
+				&ingenic_tcu_clk_info[JZ4740_CLK_TIMER0 + i],
+				clocks);
+		if (ret) {
+			pr_err("%s: cannot register clocks\n", __func__);
+			goto err_unregister;
+		}
+	}
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clocks);
+	if (ret) {
+		pr_err("%s: cannot add OF clock provider\n", __func__);
+		goto err_unregister;
+	}
+
+	return;
+
+err_unregister:
+	for (i = 0; i < clocks->num; i++)
+		if (clocks->hws[i])
+			clk_hw_unregister(clocks->hws[i]);
+	kfree(clocks);
+}
+
+static void __init jz4740_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4740);
+}
+
+static void __init jz4770_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4770);
+}
+
+static void __init jz4780_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4780);
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+CLK_OF_DECLARE(jz4740_tcu, "ingenic,jz4740-tcu-clocks", jz4740_tcu_init);
+CLK_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu-clocks", jz4770_tcu_init);
+CLK_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu-clocks", jz4780_tcu_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v3 8/9] clocksource: Add a new timer-ingenic driver
  2018-01-10 22:48     ` [PATCH v3 1/9] " Paul Cercueil
                         ` (4 preceding siblings ...)
  2018-01-10 22:48       ` [PATCH v3 7/9] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
@ 2018-01-10 22:48       ` Paul Cercueil
       [not found]         ` <20180110224838.16711-8-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
  2018-01-10 22:48       ` [PATCH v3 9/9] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
       [not found]       ` <20180110224838.16711-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
  7 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-10 22:48 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, devicetree, linux-kernel, Paul Cercueil

This driver will use the TCU (Timer Counter Unit) present on the Ingenic
JZ47xx SoCs to provide the kernel with a clocksource and timers.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/clocksource/Kconfig         |   8 ++
 drivers/clocksource/Makefile        |   1 +
 drivers/clocksource/timer-ingenic.c | 258 ++++++++++++++++++++++++++++++++++++
 3 files changed, 267 insertions(+)
 create mode 100644 drivers/clocksource/timer-ingenic.c

 v2: Use SPDX identifier for the license
 v3: - Move documentation to its own patch
     - Search the devicetree for PWM clients, and use all the TCU
	   channels that won't be used for PWM

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index c729a88007d0..7b6dedf0347d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -583,4 +583,12 @@ config CLKSRC_ST_LPC
 	  Enable this option to use the Low Power controller timer
 	  as clocksource.
 
+config INGENIC_TIMER
+	bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
+	depends on MACH_INGENIC || COMPILE_TEST
+	select CLKSRC_OF
+	default y
+	help
+	  Support for the timer/counter unit of the Ingenic JZ SoCs.
+
 endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 72711f1491e3..607c7de07d02 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -73,5 +73,6 @@ obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
+obj-$(CONFIG_INGENIC_TIMER)		+= timer-ingenic.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
diff --git a/drivers/clocksource/timer-ingenic.c b/drivers/clocksource/timer-ingenic.c
new file mode 100644
index 000000000000..6a26e75af05b
--- /dev/null
+++ b/drivers/clocksource/timer-ingenic.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx SoC TCU clocksource driver
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/ingenic-tcu.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define NUM_CHANNELS	8
+
+struct ingenic_tcu;
+
+struct ingenic_tcu_channel {
+	unsigned int idx;
+	struct clk *clk;
+};
+
+struct ingenic_tcu {
+	struct ingenic_tcu_channel channels[NUM_CHANNELS];
+	unsigned long requested;
+	struct regmap *map;
+};
+
+struct ingenic_clock_event_device {
+	struct clock_event_device cevt;
+	struct ingenic_tcu_channel *channel;
+	char name[32];
+};
+
+#define ingenic_cevt(_evt) \
+	container_of(_evt, struct ingenic_clock_event_device, cevt)
+
+static inline struct ingenic_tcu *to_ingenic_tcu(struct ingenic_tcu_channel *ch)
+{
+	return container_of(ch, struct ingenic_tcu, channels[ch->idx]);
+}
+
+static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	regmap_write(tcu->map, TCU_REG_TECR, BIT(idx));
+	return 0;
+}
+
+static int ingenic_tcu_cevt_set_next(unsigned long next,
+		struct clock_event_device *evt)
+{
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	if (next > 0xffff)
+		return -EINVAL;
+
+	regmap_write(tcu->map, TCU_REG_TDFRc(idx), (unsigned int) next);
+	regmap_write(tcu->map, TCU_REG_TCNTc(idx), 0);
+	regmap_write(tcu->map, TCU_REG_TESR, BIT(idx));
+
+	return 0;
+}
+
+static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
+{
+	struct clock_event_device *cevt = dev_id;
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(cevt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	regmap_write(tcu->map, TCU_REG_TECR, BIT(idx));
+
+	if (cevt->event_handler)
+		cevt->event_handler(cevt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ingenic_tcu_req_channel(struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	char buf[16];
+	int err;
+
+	if (test_and_set_bit(channel->idx, &tcu->requested))
+		return -EBUSY;
+
+	snprintf(buf, sizeof(buf), "timer%u", channel->idx);
+	channel->clk = clk_get(NULL, buf);
+	if (IS_ERR(channel->clk)) {
+		err = PTR_ERR(channel->clk);
+		goto out_release;
+	}
+
+	err = clk_prepare_enable(channel->clk);
+	if (err)
+		goto out_clk_put;
+
+	return 0;
+
+out_clk_put:
+	clk_put(channel->clk);
+out_release:
+	clear_bit(channel->idx, &tcu->requested);
+	return err;
+}
+
+static int __init ingenic_tcu_reset_channel(struct device_node *np,
+		struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+
+	return regmap_update_bits(tcu->map, TCU_REG_TCSRc(channel->idx),
+				0xffff & ~TCU_TCSR_RESERVED_BITS, 0);
+}
+
+static void __init ingenic_tcu_free_channel(struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+
+	clk_disable_unprepare(channel->clk);
+	clk_put(channel->clk);
+	clear_bit(channel->idx, &tcu->requested);
+}
+
+static const char * const ingenic_tcu_timer_names[] = {
+	"TCU0", "TCU1", "TCU2", "TCU3", "TCU4", "TCU5", "TCU6", "TCU7",
+};
+
+static int __init ingenic_tcu_setup_cevt(struct device_node *np,
+		struct ingenic_tcu *tcu, unsigned int idx)
+{
+	struct ingenic_tcu_channel *channel = &tcu->channels[idx];
+	struct ingenic_clock_event_device *jzcevt;
+	unsigned long rate;
+	int err, virq;
+
+	err = ingenic_tcu_req_channel(channel);
+	if (err)
+		return err;
+
+	err = ingenic_tcu_reset_channel(np, channel);
+	if (err)
+		goto err_out_free_channel;
+
+	rate = clk_get_rate(channel->clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_out_free_channel;
+	}
+
+	jzcevt = kzalloc(sizeof(*jzcevt), GFP_KERNEL);
+	if (!jzcevt) {
+		err = -ENOMEM;
+		goto err_out_free_channel;
+	}
+
+	virq = irq_of_parse_and_map(np, idx);
+	if (!virq) {
+		err = -EINVAL;
+		goto err_out_kfree_jzcevt;
+	}
+
+	err = request_irq(virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
+			ingenic_tcu_timer_names[idx], &jzcevt->cevt);
+	if (err)
+		goto err_out_irq_dispose_mapping;
+
+	jzcevt->channel = channel;
+	snprintf(jzcevt->name, sizeof(jzcevt->name), "ingenic-tcu-chan%u",
+		 channel->idx);
+
+	jzcevt->cevt.cpumask = cpumask_of(smp_processor_id());
+	jzcevt->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+	jzcevt->cevt.name = jzcevt->name;
+	jzcevt->cevt.rating = 200;
+	jzcevt->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+	jzcevt->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+
+	clockevents_config_and_register(&jzcevt->cevt, rate, 10, (1 << 16) - 1);
+
+	return 0;
+
+err_out_irq_dispose_mapping:
+	irq_dispose_mapping(virq);
+err_out_kfree_jzcevt:
+	kfree(jzcevt);
+err_out_free_channel:
+	ingenic_tcu_free_channel(channel);
+	return err;
+}
+
+static int __init ingenic_tcu_init(struct device_node *np)
+{
+	unsigned long available_channels = GENMASK(NUM_CHANNELS - 1, 0);
+	struct device_node *node;
+	struct ingenic_tcu *tcu;
+	unsigned int i, channel;
+	int err;
+	u32 val;
+
+	for_each_node_with_property(node, "pwms") {
+		err = of_property_read_u32_index(node, "pwms", 1, &val);
+		if (!err && val >= NUM_CHANNELS)
+			err = -EINVAL;
+		if (err) {
+			pr_err("timer-ingenic: Unable to parse PWM nodes!");
+			break;
+		}
+
+		pr_info("timer-ingenic: Reserving channel %u for PWM", val);
+		available_channels &= ~BIT(val);
+	}
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu)
+		return -ENOMEM;
+
+	tcu->map = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(tcu->map)) {
+		err = PTR_ERR(tcu->map);
+		kfree(tcu);
+		return err;
+	}
+
+	for (i = 0; i < NUM_CHANNELS; i++)
+		tcu->channels[i].idx = i;
+
+	for_each_set_bit(channel, &available_channels, NUM_CHANNELS) {
+		err = ingenic_tcu_setup_cevt(np, tcu, channel);
+		if (err) {
+			pr_warn("timer-ingenic: Unable to init TCU channel %u: %i",
+					channel, err);
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+CLOCKSOURCE_OF_DECLARE(jz4740_tcu, "ingenic,jz4740-tcu", ingenic_tcu_init);
+CLOCKSOURCE_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu", ingenic_tcu_init);
+CLOCKSOURCE_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu", ingenic_tcu_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v3 9/9] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  2018-01-10 22:48     ` [PATCH v3 1/9] " Paul Cercueil
                         ` (5 preceding siblings ...)
  2018-01-10 22:48       ` [PATCH v3 8/9] clocksource: Add a new timer-ingenic driver Paul Cercueil
@ 2018-01-10 22:48       ` Paul Cercueil
       [not found]       ` <20180110224838.16711-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
  7 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-01-10 22:48 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk, devicetree, linux-kernel, Paul Cercueil

Add myself as maintainer for the ingenic-tcu-intc interrupt controller
driver, the ingenic-tcu-clocks clock driver, and the ingenic-tcu
clocksource driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)

 v2: No change
 v3: No change

diff --git a/MAINTAINERS b/MAINTAINERS
index 95c3fa1f520f..1d618abe04ec 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6905,6 +6905,15 @@ L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/nand/jz4780_*
 
+INGENIC JZ47xx TCU drivers
+M:	Paul Cercueil <paul@crapouillou.net>
+S:	Maintained
+F:	drivers/clk/ingenic/tcu.c
+F:	drivers/irqchip/irq-ingenic-tcu.c
+F:	drivers/clocksource/timer-ingenic.c
+F:	include/linux/mfd/syscon/ingenic-tcu.h
+F:	include/dt-bindings/clock/ingenic,tcu.h
+
 INOTIFY
 M:	Jan Kara <jack@suse.cz>
 R:	Amir Goldstein <amir73il@gmail.com>
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 8/9] clocksource: Add a new timer-ingenic driver
       [not found]         ` <20180110224838.16711-8-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
@ 2018-01-11 14:53           ` Rob Herring
       [not found]             ` <CAL_Jsq+StZS1+qTd9CG1X2_3ay5onMgEmYG9MRUVWs-4K4-EZA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
  0 siblings, 1 reply; 80+ messages in thread
From: Rob Herring @ 2018-01-11 14:53 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On Wed, Jan 10, 2018 at 4:48 PM, Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> wrote:
> This driver will use the TCU (Timer Counter Unit) present on the Ingenic
> JZ47xx SoCs to provide the kernel with a clocksource and timers.
>
> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> ---
>  drivers/clocksource/Kconfig         |   8 ++
>  drivers/clocksource/Makefile        |   1 +
>  drivers/clocksource/timer-ingenic.c | 258 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 267 insertions(+)
>  create mode 100644 drivers/clocksource/timer-ingenic.c
>
>  v2: Use SPDX identifier for the license
>  v3: - Move documentation to its own patch
>      - Search the devicetree for PWM clients, and use all the TCU
>            channels that won't be used for PWM

[...]

> +static int __init ingenic_tcu_init(struct device_node *np)
> +{
> +       unsigned long available_channels = GENMASK(NUM_CHANNELS - 1, 0);
> +       struct device_node *node;
> +       struct ingenic_tcu *tcu;
> +       unsigned int i, channel;
> +       int err;
> +       u32 val;
> +
> +       for_each_node_with_property(node, "pwms") {
> +               err = of_property_read_u32_index(node, "pwms", 1, &val);

This is the right idea, but a bit fragile. Perhaps its good enough for
your platform, but it would fail if you have another PWM provider like
the gpio-pwm binding or the cell size is not 1 (BTW, I thought the PWM
binding defined 3 cells typically).

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 6/9] irqchip: Add the ingenic-tcu-intc driver
       [not found]         ` <20180110224838.16711-6-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
@ 2018-01-11 15:38           ` Marc Zyngier
  2018-01-11 16:25             ` Paul Cercueil
  0 siblings, 1 reply; 80+ messages in thread
From: Marc Zyngier @ 2018-01-11 15:38 UTC (permalink / raw)
  To: Paul Cercueil, Michael Turquette, Stephen Boyd, Rob Herring,
	Mark Rutland, Thomas Gleixner, Jason Cooper, Daniel Lezcano,
	Lee Jones
  Cc: linux-clk-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On 10/01/18 22:48, Paul Cercueil wrote:
> This simple driver handles the IRQ chip of the TCU
> (Timer Counter Unit) of the JZ47xx Ingenic SoCs.
> 
> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> ---
>  drivers/irqchip/Kconfig           |   6 ++
>  drivers/irqchip/Makefile          |   1 +
>  drivers/irqchip/irq-ingenic-tcu.c | 153 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 160 insertions(+)
>  create mode 100644 drivers/irqchip/irq-ingenic-tcu.c
> 
>  v2: - Use SPDX identifier for the license
>      - Make KConfig option select CONFIG_IRQ_DOMAIN since we depend on it
>  v3: - Move documentation to its own patch
>      - Add comment explaining why we only use IRQCHIP_DECLARE
> 
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index c70476b34a53..74668f3605b0 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -267,6 +267,12 @@ config INGENIC_IRQ
>  	depends on MACH_INGENIC
>  	default y
>  
> +config INGENIC_TCU_IRQ
> +	bool
> +	depends on MACH_INGENIC || COMPILE_TEST
> +	select IRQ_DOMAIN
> +	default y
> +
>  config RENESAS_H8300H_INTC
>          bool
>  	select IRQ_DOMAIN
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index d2df34a54d38..6effe0271cd6 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -70,6 +70,7 @@ obj-$(CONFIG_RENESAS_H8300H_INTC)	+= irq-renesas-h8300h.o
>  obj-$(CONFIG_RENESAS_H8S_INTC)		+= irq-renesas-h8s.o
>  obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
>  obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
> +obj-$(CONFIG_INGENIC_TCU_IRQ)		+= irq-ingenic-tcu.o
>  obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
>  obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
>  obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
> diff --git a/drivers/irqchip/irq-ingenic-tcu.c b/drivers/irqchip/irq-ingenic-tcu.c
> new file mode 100644
> index 000000000000..52e9688b31f6
> --- /dev/null
> +++ b/drivers/irqchip/irq-ingenic-tcu.c
> @@ -0,0 +1,153 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * JZ47xx SoCs TCU IRQ driver
> + * Copyright (C) 2018 Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/syscon/ingenic-tcu.h>
> +
> +static void ingenic_tcu_intc_cascade(struct irq_desc *desc)
> +{
> +	struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
> +	struct irq_domain *domain = irq_desc_get_handler_data(desc);
> +	struct irq_chip_generic *gc = irq_get_domain_generic_chip(domain, 0);
> +	struct regmap *map = gc->private;
> +	uint32_t irq_reg, irq_mask;
> +	unsigned int i;
> +
> +	regmap_read(map, TCU_REG_TFR, &irq_reg);
> +	regmap_read(map, TCU_REG_TMR, &irq_mask);
> +
> +	chained_irq_enter(irq_chip, desc);
> +
> +	irq_reg &= ~irq_mask;
> +
> +	for (i = 0; i < 32; i++) {
> +		if (irq_reg & BIT(i))
> +			generic_handle_irq(irq_linear_revmap(domain, i));
> +	}
> +
> +	chained_irq_exit(irq_chip, desc);
> +}
> +
> +static void ingenic_tcu_gc_unmask_enable_reg(struct irq_data *d)
> +{
> +	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> +	struct irq_chip_type *ct = irq_data_get_chip_type(d);
> +	struct regmap *map = gc->private;
> +	u32 mask = d->mask;
> +
> +	irq_gc_lock(gc);
> +	regmap_write(map, ct->regs.ack, mask);
> +	regmap_write(map, ct->regs.enable, mask);
> +	*ct->mask_cache |= mask;
> +	irq_gc_unlock(gc);
> +}
> +
> +static void ingenic_tcu_gc_mask_disable_reg(struct irq_data *d)
> +{
> +	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> +	struct irq_chip_type *ct = irq_data_get_chip_type(d);
> +	struct regmap *map = gc->private;
> +	u32 mask = d->mask;
> +
> +	irq_gc_lock(gc);
> +	regmap_write(map, ct->regs.disable, mask);
> +	*ct->mask_cache &= ~mask;
> +	irq_gc_unlock(gc);
> +}
> +
> +static void ingenic_tcu_gc_mask_disable_reg_and_ack(struct irq_data *d)
> +{
> +	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> +	struct irq_chip_type *ct = irq_data_get_chip_type(d);
> +	struct regmap *map = gc->private;
> +	u32 mask = d->mask;
> +
> +	irq_gc_lock(gc);
> +	regmap_write(map, ct->regs.ack, mask);
> +	regmap_write(map, ct->regs.disable, mask);
> +	irq_gc_unlock(gc);
> +}
> +
> +static int __init ingenic_tcu_intc_of_init(struct device_node *node,
> +	struct device_node *parent)
> +{
> +	struct irq_domain *domain;
> +	struct irq_chip_generic *gc;
> +	struct irq_chip_type *ct;
> +	int err, i, num_parent_irqs;
> +	unsigned int parent_irqs[3];

3 parent interrupts? Really? How do you pick one? Also, given the useage
model below, "int" is the wrong type. Probably should be u32.

> +	struct regmap *map;
> +
> +	num_parent_irqs = of_property_count_elems_of_size(
> +			node, "interrupts", 4);

Nit: on a single line, as here is nothing that hurts my eyes more than
reading something like(
this). Also, 4 is better expressed as sizeof(u32).


> +	if (num_parent_irqs < 0 || num_parent_irqs > ARRAY_SIZE(parent_irqs))
> +		return -EINVAL;
> +
> +	map = syscon_node_to_regmap(node->parent);
> +	if (IS_ERR(map))
> +		return PTR_ERR(map);
> +
> +	domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops, NULL);
> +	if (!domain)
> +		return -ENOMEM;
> +
> +	err = irq_alloc_domain_generic_chips(domain, 32, 1, "TCU",
> +			handle_level_irq, 0, IRQ_NOPROBE | IRQ_LEVEL, 0);
> +	if (err)
> +		goto out_domain_remove;
> +
> +	gc = irq_get_domain_generic_chip(domain, 0);
> +	ct = gc->chip_types;
> +
> +	gc->wake_enabled = IRQ_MSK(32);
> +	gc->private = map;
> +
> +	ct->regs.disable = TCU_REG_TMSR;
> +	ct->regs.enable = TCU_REG_TMCR;
> +	ct->regs.ack = TCU_REG_TFCR;
> +	ct->chip.irq_unmask = ingenic_tcu_gc_unmask_enable_reg;
> +	ct->chip.irq_mask = ingenic_tcu_gc_mask_disable_reg;
> +	ct->chip.irq_mask_ack = ingenic_tcu_gc_mask_disable_reg_and_ack;
> +	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
> +
> +	/* Mask all IRQs by default */
> +	regmap_write(map, TCU_REG_TMSR, IRQ_MSK(32));
> +
> +	for (i = 0; i < num_parent_irqs; i++) {
> +		parent_irqs[i] = irq_of_parse_and_map(node, i);
> +		if (!parent_irqs[i]) {
> +			err = -EINVAL;
> +			goto out_unmap_irqs;
> +		}
> +
> +		irq_set_chained_handler_and_data(parent_irqs[i],
> +				ingenic_tcu_intc_cascade, domain);
> +	}

I don't get the multiple parent irq at all. How are the source interrupt
routed to the various cascades?

> +
> +	return 0;
> +
> +out_unmap_irqs:
> +	for (; i > 0; i--)
> +		irq_dispose_mapping(parent_irqs[i - 1]);
> +out_domain_remove:
> +	irq_domain_remove(domain);
> +	return err;
> +}
> +
> +/* We only probe via devicetree, no need for a platform driver */
> +IRQCHIP_DECLARE(jz4740_tcu_intc, "ingenic,jz4740-tcu-intc",
> +		ingenic_tcu_intc_of_init);
> +IRQCHIP_DECLARE(jz4770_tcu_intc, "ingenic,jz4770-tcu-intc",
> +		ingenic_tcu_intc_of_init);
> +IRQCHIP_DECLARE(jz4780_tcu_intc, "ingenic,jz4780-tcu-intc",
> +		ingenic_tcu_intc_of_init);
> 

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 8/9] clocksource: Add a new timer-ingenic driver
       [not found]             ` <CAL_Jsq+StZS1+qTd9CG1X2_3ay5onMgEmYG9MRUVWs-4K4-EZA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2018-01-11 16:16               ` Paul Cercueil
  0 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-01-11 16:16 UTC (permalink / raw)
  To: Rob Herring
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

Hi Rob,

Le jeu. 11 janv. 2018 à 15:53, Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> a 
écrit :
> On Wed, Jan 10, 2018 at 4:48 PM, Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> 
> wrote:
>>  This driver will use the TCU (Timer Counter Unit) present on the 
>> Ingenic
>>  JZ47xx SoCs to provide the kernel with a clocksource and timers.
>> 
>>  Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
>>  ---
>>   drivers/clocksource/Kconfig         |   8 ++
>>   drivers/clocksource/Makefile        |   1 +
>>   drivers/clocksource/timer-ingenic.c | 258 
>> ++++++++++++++++++++++++++++++++++++
>>   3 files changed, 267 insertions(+)
>>   create mode 100644 drivers/clocksource/timer-ingenic.c
>> 
>>   v2: Use SPDX identifier for the license
>>   v3: - Move documentation to its own patch
>>       - Search the devicetree for PWM clients, and use all the TCU
>>             channels that won't be used for PWM
> 
> [...]
> 
>>  +static int __init ingenic_tcu_init(struct device_node *np)
>>  +{
>>  +       unsigned long available_channels = GENMASK(NUM_CHANNELS - 
>> 1, 0);
>>  +       struct device_node *node;
>>  +       struct ingenic_tcu *tcu;
>>  +       unsigned int i, channel;
>>  +       int err;
>>  +       u32 val;
>>  +
>>  +       for_each_node_with_property(node, "pwms") {
>>  +               err = of_property_read_u32_index(node, "pwms", 1, 
>> &val);
> 
> This is the right idea, but a bit fragile. Perhaps its good enough for
> your platform, but it would fail if you have another PWM provider like
> the gpio-pwm binding or the cell size is not 1 (BTW, I thought the PWM
> binding defined 3 cells typically).

Index 1 is always the channel number of the PWM, it works fine with 
3-cells
PWM bindings, that's what I tested it with.

Ok, would it be enough to check that "the PWM clients we detect are 
connected
to the PWM driver whose parent is also our parent" (since both drivers 
are in
the same syscon/simple-mfd node)?

Thanks,
-Paul

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 6/9] irqchip: Add the ingenic-tcu-intc driver
  2018-01-11 15:38           ` Marc Zyngier
@ 2018-01-11 16:25             ` Paul Cercueil
  2018-01-20 13:06               ` Marc Zyngier
  0 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-01-11 16:25 UTC (permalink / raw)
  To: Marc Zyngier
  Cc: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Daniel Lezcano, Lee Jones,
	linux-clk, devicetree, linux-kernel


Hi Marc,

>>  +static int __init ingenic_tcu_intc_of_init(struct device_node 
>> *node,
>>  +	struct device_node *parent)
>>  +{
>>  +	struct irq_domain *domain;
>>  +	struct irq_chip_generic *gc;
>>  +	struct irq_chip_type *ct;
>>  +	int err, i, num_parent_irqs;
>>  +	unsigned int parent_irqs[3];
> 
> 3 parent interrupts? Really? How do you pick one? Also, given the 
> useage
> model below, "int" is the wrong type. Probably should be u32.

See below.

>>  +	struct regmap *map;
>>  +
>>  +	num_parent_irqs = of_property_count_elems_of_size(
>>  +			node, "interrupts", 4);
> 
> Nit: on a single line, as here is nothing that hurts my eyes more than
> reading something like(
> this). Also, 4 is better expressed as sizeof(u32).

That will make checkpatch.pl unhappy :(

>>  +	if (num_parent_irqs < 0 || num_parent_irqs > 
>> ARRAY_SIZE(parent_irqs))
>>  +		return -EINVAL;
>>  +
>>  +	map = syscon_node_to_regmap(node->parent);
>>  +	if (IS_ERR(map))
>>  +		return PTR_ERR(map);
>>  +
>>  +	domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops, 
>> NULL);
>>  +	if (!domain)
>>  +		return -ENOMEM;
>>  +
>>  +	err = irq_alloc_domain_generic_chips(domain, 32, 1, "TCU",
>>  +			handle_level_irq, 0, IRQ_NOPROBE | IRQ_LEVEL, 0);
>>  +	if (err)
>>  +		goto out_domain_remove;
>>  +
>>  +	gc = irq_get_domain_generic_chip(domain, 0);
>>  +	ct = gc->chip_types;
>>  +
>>  +	gc->wake_enabled = IRQ_MSK(32);
>>  +	gc->private = map;
>>  +
>>  +	ct->regs.disable = TCU_REG_TMSR;
>>  +	ct->regs.enable = TCU_REG_TMCR;
>>  +	ct->regs.ack = TCU_REG_TFCR;
>>  +	ct->chip.irq_unmask = ingenic_tcu_gc_unmask_enable_reg;
>>  +	ct->chip.irq_mask = ingenic_tcu_gc_mask_disable_reg;
>>  +	ct->chip.irq_mask_ack = ingenic_tcu_gc_mask_disable_reg_and_ack;
>>  +	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
>>  +
>>  +	/* Mask all IRQs by default */
>>  +	regmap_write(map, TCU_REG_TMSR, IRQ_MSK(32));
>>  +
>>  +	for (i = 0; i < num_parent_irqs; i++) {
>>  +		parent_irqs[i] = irq_of_parse_and_map(node, i);
>>  +		if (!parent_irqs[i]) {
>>  +			err = -EINVAL;
>>  +			goto out_unmap_irqs;
>>  +		}
>>  +
>>  +		irq_set_chained_handler_and_data(parent_irqs[i],
>>  +				ingenic_tcu_intc_cascade, domain);
>>  +	}
> 
> I don't get the multiple parent irq at all. How are the source 
> interrupt
> routed to the various cascades?

On JZ4740, channels 0 and 1 have their own interrupt, and channels 2-7 
share
one interrupt line.
On JZ4770 and JZ4780, the OST (OS timer) channel has its own interrupt,
channel 5 has its own interrupt, and channels 0-4 and 6-7 share one
interrupt line.

To keep things simple, we register the same interrupt handler for the 
three
parent interrupts.

-Paul


^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 3/9] doc: dt-bindings: Add doc for Ingenic TCU IRQ driver
       [not found]         ` <20180110224838.16711-3-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
@ 2018-01-19 21:05           ` Rob Herring
  0 siblings, 0 replies; 80+ messages in thread
From: Rob Herring @ 2018-01-19 21:05 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones,
	linux-clk-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On Wed, Jan 10, 2018 at 11:48:32PM +0100, Paul Cercueil wrote:
> Add documentation about how to properly use the Ingenic TCU
> (Timer/Counter Unit) IRQ driver from devicetree.

Drop "doc: " from the subject in this and others.

> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> ---
>  .../bindings/interrupt-controller/ingenic,tcu.txt  | 33 ++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> 
>  v3: New patch in this series
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..e3a7d2354172
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> @@ -0,0 +1,33 @@
> +Ingenic SoCs Timer/Counter Unit Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
> +  * ingenic,jz4740-tcu-intc
> +  * ingenic,jz4770-tcu-intc
> +  * ingenic,jz4780-tcu-intc
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> +  interrupt source. The value shall be 1.
> +- interrupt-parent : phandle of the interrupt controller.
> +- interrupts : Specifies the interrupt the controller is connected to.
> +
> +Example:
> +
> +/ {
> +	mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;

Need a "ranges;" here. Better yet make ranges translate child address 0 
to 0x10002000 base.

> +
> +		tcu_irq: interrupt-controller {

Need a unit-address. Building with W=1 will tell you this (assuming this 
is cut-n-paste from your dts).

interrupt-controlleer@10002020 (or @20 with a ranges translation)

> +			compatible = "ingenic,jz4740-tcu-intc";
> +			reg = <0x10002020 0x20>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <15>;
> +		};
> +	};
> +};
> -- 
> 2.11.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 4/9] doc: dt-bindings: Add doc for the Ingenic TCU clocks driver
       [not found]         ` <20180110224838.16711-4-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
@ 2018-01-19 21:11           ` Rob Herring
  0 siblings, 0 replies; 80+ messages in thread
From: Rob Herring @ 2018-01-19 21:11 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones,
	linux-clk-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On Wed, Jan 10, 2018 at 11:48:33PM +0100, Paul Cercueil wrote:
> Add documentation about how to properly use the Ingenic TCU
> (Timer/Counter Unit) clocks driver from devicetree.
> 
> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> ---
>  .../bindings/clock/ingenic,tcu-clocks.txt          | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
> 
>  v3: New patch in this series
> 
> diff --git a/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
> new file mode 100644
> index 000000000000..90bb30e07b86
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
> @@ -0,0 +1,36 @@
> +Ingenic SoC TCU binding
> +
> +The TCU is the Timer/Counter Unit present in all Ingenic SoCs. It features 8
> +channels, each one having its own clock, that can be started and stopped,
> +reparented, and reclocked.
> +
> +Required properties:
> +- compatible : One of:
> +  * ingenic,jz4740-tcu-clocks,
> +  * ingenic,jz4770-tcu-clocks,
> +  * ingenic,jz4780-tcu-clocks.
> +- clocks : List of phandle & clock specifiers for clocks external to the TCU.
> +  The "pclk", "rtc" and "ext" clocks should be provided.
> +- clock-names : List of name strings for the external clocks.
> +- #clock-cells: Should be 1.
> +  Clock consumers specify this argument to identify a clock. The valid values
> +  may be found in <dt-bindings/clock/ingenic,tcu.h>.

Need to say this is a child of "ingenic,tcu" and reference it's binding 
doc.

> +
> +Example:
> +
> +/ {
> +	mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +
> +		tcu_clk: clocks {

clocks@10002010

And ranges needed.

> +			compatible = "ingenic,jz4740-tcu-clocks";
> +			reg = <0x10002010 0xFF0>;

0xff0

> +
> +			clocks = <&ext>, <&rtc>, <&pclk>;
> +			clock-names = "ext", "rtc", "pclk";
> +
> +			#clock-cells = <1>;
> +		};
> +	};
> +};
> -- 
> 2.11.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 5/9] doc: dt-bindings: Add doc for the Ingenic TCU timers driver
  2018-01-10 22:48       ` [PATCH v3 5/9] doc: dt-bindings: Add doc for the Ingenic TCU timers driver Paul Cercueil
@ 2018-01-19 21:12         ` Rob Herring
  0 siblings, 0 replies; 80+ messages in thread
From: Rob Herring @ 2018-01-19 21:12 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones, linux-clk,
	devicetree, linux-kernel

On Wed, Jan 10, 2018 at 11:48:34PM +0100, Paul Cercueil wrote:
> Add documentation about how to properly use the Ingenic TCU
> (Timer/Counter Unit) timers driver from devicetree.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  .../devicetree/bindings/timer/ingenic,tcu.txt      | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> 
>  v3: New patch in this series

Similar comments in this one.

> 
> diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..dd76877efb8b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> @@ -0,0 +1,35 @@
> +Ingenic JZ47xx SoCs Timer/Counter Unit driver
> +---------------------------------------------
> +
> +Required properties:
> +
> +- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
> +  * ingenic,jz4740-tcu
> +  * ingenic,jz4770-tcu
> +  * ingenic,jz4780-tcu
> +- interrupt-parent : phandle of the TCU interrupt controller.
> +- interrupts : Specifies the interrupts the controller is connected to.
> +- clocks : List of phandle & clock specifiers for the TCU clocks.
> +- clock-names : List of name strings for the TCU clocks.

Need to be explicit with how many clocks and their order.

> +
> +Example:
> +
> +/ {
> +	mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +
> +		tcu_timer: timer {
> +			compatible = "ingenic,jz4740-tcu";
> +			reg = <0x10002010 0xFF0>;
> +
> +			clocks = <&tcu 0>, <&tcu 1>, <&tcu 2>, <&tcu 3>,
> +					 <&tcu 4>, <&tcu 5>, <&tcu 6>, <&tcu 7>;
> +			clock-names = "timer0", "timer1", "timer2", "timer3",
> +						  "timer4", "timer5", "timer6", "timer7";
> +
> +			interrupt-parent = <&tcu>;
> +			interrupts = <0 1 2 3 4 5 6 7>;
> +		};
> +	};
> +};
> -- 
> 2.11.0
> 

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 6/9] irqchip: Add the ingenic-tcu-intc driver
  2018-01-11 16:25             ` Paul Cercueil
@ 2018-01-20 13:06               ` Marc Zyngier
  2018-01-22  9:26                 ` Lee Jones
  0 siblings, 1 reply; 80+ messages in thread
From: Marc Zyngier @ 2018-01-20 13:06 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Daniel Lezcano, Lee Jones,
	linux-clk, devicetree, linux-kernel

On Thu, 11 Jan 2018 17:25:45 +0100
Paul Cercueil <paul@crapouillou.net> wrote:

> Hi Marc,
> 
> >>  +static int __init ingenic_tcu_intc_of_init(struct device_node 
> >> *node,
> >>  +	struct device_node *parent)
> >>  +{
> >>  +	struct irq_domain *domain;
> >>  +	struct irq_chip_generic *gc;
> >>  +	struct irq_chip_type *ct;
> >>  +	int err, i, num_parent_irqs;
> >>  +	unsigned int parent_irqs[3];  
> > 
> > 3 parent interrupts? Really? How do you pick one? Also, given the 
> > useage
> > model below, "int" is the wrong type. Probably should be u32.  
> 
> See below.
> 
> >>  +	struct regmap *map;
> >>  +
> >>  +	num_parent_irqs = of_property_count_elems_of_size(
> >>  +			node, "interrupts", 4);  
> > 
> > Nit: on a single line, as here is nothing that hurts my eyes more than
> > reading something like(
> > this). Also, 4 is better expressed as sizeof(u32).  
> 
> That will make checkpatch.pl unhappy :(

And I don't care about checkpatch. I maintain the irqchip stuff, while
checkpatch doesn't. Hence, I win.

> 
> >>  +	if (num_parent_irqs < 0 || num_parent_irqs > 
> >> ARRAY_SIZE(parent_irqs))
> >>  +		return -EINVAL;
> >>  +
> >>  +	map = syscon_node_to_regmap(node->parent);
> >>  +	if (IS_ERR(map))
> >>  +		return PTR_ERR(map);
> >>  +
> >>  +	domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops, 
> >> NULL);
> >>  +	if (!domain)
> >>  +		return -ENOMEM;
> >>  +
> >>  +	err = irq_alloc_domain_generic_chips(domain, 32, 1, "TCU",
> >>  +			handle_level_irq, 0, IRQ_NOPROBE | IRQ_LEVEL, 0);
> >>  +	if (err)
> >>  +		goto out_domain_remove;
> >>  +
> >>  +	gc = irq_get_domain_generic_chip(domain, 0);
> >>  +	ct = gc->chip_types;
> >>  +
> >>  +	gc->wake_enabled = IRQ_MSK(32);
> >>  +	gc->private = map;
> >>  +
> >>  +	ct->regs.disable = TCU_REG_TMSR;
> >>  +	ct->regs.enable = TCU_REG_TMCR;
> >>  +	ct->regs.ack = TCU_REG_TFCR;
> >>  +	ct->chip.irq_unmask = ingenic_tcu_gc_unmask_enable_reg;
> >>  +	ct->chip.irq_mask = ingenic_tcu_gc_mask_disable_reg;
> >>  +	ct->chip.irq_mask_ack = ingenic_tcu_gc_mask_disable_reg_and_ack;
> >>  +	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
> >>  +
> >>  +	/* Mask all IRQs by default */
> >>  +	regmap_write(map, TCU_REG_TMSR, IRQ_MSK(32));
> >>  +
> >>  +	for (i = 0; i < num_parent_irqs; i++) {
> >>  +		parent_irqs[i] = irq_of_parse_and_map(node, i);
> >>  +		if (!parent_irqs[i]) {
> >>  +			err = -EINVAL;
> >>  +			goto out_unmap_irqs;
> >>  +		}
> >>  +
> >>  +		irq_set_chained_handler_and_data(parent_irqs[i],
> >>  +				ingenic_tcu_intc_cascade, domain);
> >>  +	}  
> > 
> > I don't get the multiple parent irq at all. How are the source 
> > interrupt routed to the various cascades?  
> 
> On JZ4740, channels 0 and 1 have their own interrupt, and channels
> 2-7 share one interrupt line.
> On JZ4770 and JZ4780, the OST (OS timer) channel has its own
> interrupt, channel 5 has its own interrupt, and channels 0-4 and 6-7
> share one interrupt line.

What a mess. I suppose you get a shared status register to find out
which channel has fired?

> To keep things simple, we register the same interrupt handler for the 
> three parent interrupts.

Please add a comment to that effect, documenting the above HW blunder.

Thanks,

	M.
-- 
Without deviation from the norm, progress is not possible.

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 6/9] irqchip: Add the ingenic-tcu-intc driver
  2018-01-20 13:06               ` Marc Zyngier
@ 2018-01-22  9:26                 ` Lee Jones
  2018-01-22  9:55                   ` Marc Zyngier
  0 siblings, 1 reply; 80+ messages in thread
From: Lee Jones @ 2018-01-22  9:26 UTC (permalink / raw)
  To: Marc Zyngier
  Cc: Paul Cercueil, Michael Turquette, Stephen Boyd, Rob Herring,
	Mark Rutland, Thomas Gleixner, Jason Cooper, Daniel Lezcano,
	linux-clk, devicetree, linux-kernel

On Sat, 20 Jan 2018, Marc Zyngier wrote:

> On Thu, 11 Jan 2018 17:25:45 +0100
> Paul Cercueil <paul@crapouillou.net> wrote:
> 
> > Hi Marc,
> > 
> > >>  +static int __init ingenic_tcu_intc_of_init(struct device_node 
> > >> *node,
> > >>  +	struct device_node *parent)
> > >>  +{
> > >>  +	struct irq_domain *domain;
> > >>  +	struct irq_chip_generic *gc;
> > >>  +	struct irq_chip_type *ct;
> > >>  +	int err, i, num_parent_irqs;
> > >>  +	unsigned int parent_irqs[3];  
> > > 
> > > 3 parent interrupts? Really? How do you pick one? Also, given the 
> > > useage
> > > model below, "int" is the wrong type. Probably should be u32.  
> > 
> > See below.
> > 
> > >>  +	struct regmap *map;
> > >>  +
> > >>  +	num_parent_irqs = of_property_count_elems_of_size(
> > >>  +			node, "interrupts", 4);  
> > > 
> > > Nit: on a single line, as here is nothing that hurts my eyes more than
> > > reading something like(
> > > this). Also, 4 is better expressed as sizeof(u32).  
> > 
> > That will make checkpatch.pl unhappy :(
> 
> And I don't care about checkpatch. I maintain the irqchip stuff, while
> checkpatch doesn't. Hence, I win.

	num_parent_irqs =
		of_property_count_elems_of_size(node, "interrupts", 4);  

Everybody wins!

-- 
Lee Jones
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 6/9] irqchip: Add the ingenic-tcu-intc driver
  2018-01-22  9:26                 ` Lee Jones
@ 2018-01-22  9:55                   ` Marc Zyngier
       [not found]                     ` <bdae1be4-0ed2-1b7d-8b08-7439ce06e762-5wv7dgnIgG8@public.gmane.org>
  0 siblings, 1 reply; 80+ messages in thread
From: Marc Zyngier @ 2018-01-22  9:55 UTC (permalink / raw)
  To: Lee Jones
  Cc: Paul Cercueil, Michael Turquette, Stephen Boyd, Rob Herring,
	Mark Rutland, Thomas Gleixner, Jason Cooper, Daniel Lezcano,
	linux-clk, devicetree, linux-kernel

On 22/01/18 09:26, Lee Jones wrote:
> On Sat, 20 Jan 2018, Marc Zyngier wrote:
> 
>> On Thu, 11 Jan 2018 17:25:45 +0100
>> Paul Cercueil <paul@crapouillou.net> wrote:
>>
>>> Hi Marc,
>>>
>>>>>  +static int __init ingenic_tcu_intc_of_init(struct device_node 
>>>>> *node,
>>>>>  +	struct device_node *parent)
>>>>>  +{
>>>>>  +	struct irq_domain *domain;
>>>>>  +	struct irq_chip_generic *gc;
>>>>>  +	struct irq_chip_type *ct;
>>>>>  +	int err, i, num_parent_irqs;
>>>>>  +	unsigned int parent_irqs[3];  
>>>>
>>>> 3 parent interrupts? Really? How do you pick one? Also, given the 
>>>> useage
>>>> model below, "int" is the wrong type. Probably should be u32.  
>>>
>>> See below.
>>>
>>>>>  +	struct regmap *map;
>>>>>  +
>>>>>  +	num_parent_irqs = of_property_count_elems_of_size(
>>>>>  +			node, "interrupts", 4);  
>>>>
>>>> Nit: on a single line, as here is nothing that hurts my eyes more than
>>>> reading something like(
>>>> this). Also, 4 is better expressed as sizeof(u32).  
>>>
>>> That will make checkpatch.pl unhappy :(
>>
>> And I don't care about checkpatch. I maintain the irqchip stuff, while
>> checkpatch doesn't. Hence, I win.
> 
> 	num_parent_irqs =
> 		of_property_count_elems_of_size(node, "interrupts", 4);  
> 
> Everybody wins!

<old_git_rant>

As I said before, I've stopped using a physical DEC VT100 around 1990,
and gained the ability to extend my terminal to a bit more that 80
columns. And even the VT100 could be coerced into using a 132 column mode...

</old_git_rant>

Adhering to a convention can be good, but common sense must apply first.
Splitting an assignment is visually annoying and in that case, it
doesn't make much sense. I'll happily take a line that goes beyond 80
cols, and if you really wanted to stay within boundaries, how about
turning "num_parent_irqs" something shorter?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 6/9] irqchip: Add the ingenic-tcu-intc driver
       [not found]                     ` <bdae1be4-0ed2-1b7d-8b08-7439ce06e762-5wv7dgnIgG8@public.gmane.org>
@ 2018-01-22 11:46                       ` Lee Jones
  0 siblings, 0 replies; 80+ messages in thread
From: Lee Jones @ 2018-01-22 11:46 UTC (permalink / raw)
  To: Marc Zyngier
  Cc: Paul Cercueil, Michael Turquette, Stephen Boyd, Rob Herring,
	Mark Rutland, Thomas Gleixner, Jason Cooper, Daniel Lezcano,
	linux-clk-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On Mon, 22 Jan 2018, Marc Zyngier wrote:

> On 22/01/18 09:26, Lee Jones wrote:
> > On Sat, 20 Jan 2018, Marc Zyngier wrote:
> > 
> >> On Thu, 11 Jan 2018 17:25:45 +0100
> >> Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> wrote:
> >>
> >>> Hi Marc,
> >>>
> >>>>>  +static int __init ingenic_tcu_intc_of_init(struct device_node 
> >>>>> *node,
> >>>>>  +	struct device_node *parent)
> >>>>>  +{
> >>>>>  +	struct irq_domain *domain;
> >>>>>  +	struct irq_chip_generic *gc;
> >>>>>  +	struct irq_chip_type *ct;
> >>>>>  +	int err, i, num_parent_irqs;
> >>>>>  +	unsigned int parent_irqs[3];  
> >>>>
> >>>> 3 parent interrupts? Really? How do you pick one? Also, given the 
> >>>> useage
> >>>> model below, "int" is the wrong type. Probably should be u32.  
> >>>
> >>> See below.
> >>>
> >>>>>  +	struct regmap *map;
> >>>>>  +
> >>>>>  +	num_parent_irqs = of_property_count_elems_of_size(
> >>>>>  +			node, "interrupts", 4);  
> >>>>
> >>>> Nit: on a single line, as here is nothing that hurts my eyes more than
> >>>> reading something like(
> >>>> this). Also, 4 is better expressed as sizeof(u32).  
> >>>
> >>> That will make checkpatch.pl unhappy :(
> >>
> >> And I don't care about checkpatch. I maintain the irqchip stuff, while
> >> checkpatch doesn't. Hence, I win.
> > 
> > 	num_parent_irqs =
> > 		of_property_count_elems_of_size(node, "interrupts", 4);  
> > 
> > Everybody wins!
> 
> <old_git_rant>
> 
> As I said before, I've stopped using a physical DEC VT100 around 1990,
> and gained the ability to extend my terminal to a bit more that 80
> columns. And even the VT100 could be coerced into using a 132 column mode...
> 
> </old_git_rant>

Right, Greg has spoken about this before.

> Adhering to a convention can be good, but common sense must apply first.
> Splitting an assignment is visually annoying and in that case, it
> doesn't make much sense. I'll happily take a line that goes beyond 80
> cols

I'm not adverse to the idea, but we should agree to do this centrally,
rather than a few of us going rouge.  This way we can go ahead and
change all of the documentation and tooling (inc. Checkpatch) too,
which will save on countless inevitable conversations/patches
attempting to 'fix' non-conforming lines/files.

> and if you really wanted to stay within boundaries, how about
> turning "num_parent_irqs" something shorter?


-- 
Lee Jones
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 1/9] mfd: syscon: Add ingenic-tcu.h header
       [not found]       ` <20180110224838.16711-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
  2018-01-10 22:48         ` [PATCH v3 2/9] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
@ 2018-01-23  9:52         ` Lee Jones
  1 sibling, 0 replies; 80+ messages in thread
From: Lee Jones @ 2018-01-23  9:52 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland,
	Thomas Gleixner, Jason Cooper, Marc Zyngier, Daniel Lezcano,
	linux-clk-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On Wed, 10 Jan 2018, Paul Cercueil wrote:

> This header contains macros for the registers that are present in the
> regmap shared by all the drivers related to the TCU (Timer Counter Unit)
> of the Ingenic JZ47xx SoCs.
> 
> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> ---
>  include/linux/mfd/syscon/ingenic-tcu.h | 54 ++++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
>  create mode 100644 include/linux/mfd/syscon/ingenic-tcu.h

Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

-- 
Lee Jones
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v3 7/9] clk: ingenic: Add JZ47xx TCU clocks driver
       [not found]         ` <20180110224838.16711-7-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
@ 2018-01-27  0:37           ` Stephen Boyd
  0 siblings, 0 replies; 80+ messages in thread
From: Stephen Boyd @ 2018-01-27  0:37 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Michael Turquette, Rob Herring, Mark Rutland, Thomas Gleixner,
	Jason Cooper, Marc Zyngier, Daniel Lezcano, Lee Jones,
	linux-clk-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On 01/10, Paul Cercueil wrote:
> The TCU (Timer Counter Unit) of the Ingenic JZ47xx SoCs features 8
> channels, each one having its own clock, that can be started and
> stopped, reparented, and reclocked.
> 
> This driver only modifies the bits of the registers of the TCU that are
> related to clocks control. It provides one clock per TCU channel (plus
> one for the watchdog and one for the OS timer) that can be used by other
> drivers.
> 
> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> ---

Acked-by: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 80+ messages in thread

* [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers
  2018-01-10 22:48         ` [PATCH v3 2/9] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
@ 2018-03-17 23:28           ` Paul Cercueil
  2018-03-17 23:28             ` [PATCH v4 1/8] mfd: syscon: Add ingenic-tcu.h header Paul Cercueil
                               ` (8 more replies)
  0 siblings, 9 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-03-17 23:28 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

Hi,

This is the 4th version of my TCU patchset.

The major change is a greatly improved documentation, both in-code
and as separate text files, to describe how the hardware works and
how the devicetree bindings should be used.

There are also cosmetic changes in the irqchip driver, and the
clocksource driver will now use as timers all TCU channels not
requested by the TCU PWM driver.

Cheers,
-Paul

^ permalink raw reply	[flat|nested] 80+ messages in thread

* [PATCH v4 1/8] mfd: syscon: Add ingenic-tcu.h header
  2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
@ 2018-03-17 23:28             ` Paul Cercueil
  2018-03-17 23:28             ` [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
                               ` (7 subsequent siblings)
  8 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-03-17 23:28 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc, Paul Cercueil

This header contains macros for the registers that are present in the
regmap shared by all the drivers related to the TCU (Timer Counter Unit)
of the Ingenic JZ47xx SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 include/linux/mfd/syscon/ingenic-tcu.h | 54 ++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 include/linux/mfd/syscon/ingenic-tcu.h

 v2: Use SPDX identifier for the license
 v3: - Use macros instead of enum
     - Add 'TCU_' at the beginning of each macro
	 - Remove useless include <linux/regmap.h>
 v4: No change

diff --git a/include/linux/mfd/syscon/ingenic-tcu.h b/include/linux/mfd/syscon/ingenic-tcu.h
new file mode 100644
index 000000000000..96dd59f7c3b2
--- /dev/null
+++ b/include/linux/mfd/syscon/ingenic-tcu.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Header file for the Ingenic JZ47xx TCU driver
+ */
+#ifndef __LINUX_CLK_INGENIC_TCU_H_
+#define __LINUX_CLK_INGENIC_TCU_H_
+
+#include <linux/bitops.h>
+
+#define TCU_REG_WDT_TDR		0x00
+#define TCU_REG_WDT_TCER	0x04
+#define TCU_REG_WDT_TCNT	0x08
+#define TCU_REG_WDT_TCSR	0x0c
+#define TCU_REG_TER		0x10
+#define TCU_REG_TESR		0x14
+#define TCU_REG_TECR		0x18
+#define TCU_REG_TSR		0x1c
+#define TCU_REG_TFR		0x20
+#define TCU_REG_TFSR		0x24
+#define TCU_REG_TFCR		0x28
+#define TCU_REG_TSSR		0x2c
+#define TCU_REG_TMR		0x30
+#define TCU_REG_TMSR		0x34
+#define TCU_REG_TMCR		0x38
+#define TCU_REG_TSCR		0x3c
+#define TCU_REG_TDFR0		0x40
+#define TCU_REG_TDHR0		0x44
+#define TCU_REG_TCNT0		0x48
+#define TCU_REG_TCSR0		0x4c
+#define TCU_REG_OST_DR		0xe0
+#define TCU_REG_OST_CNTL	0xe4
+#define TCU_REG_OST_CNTH	0xe8
+#define TCU_REG_OST_TCSR	0xec
+#define TCU_REG_TSTR		0xf0
+#define TCU_REG_TSTSR		0xf4
+#define TCU_REG_TSTCR		0xf8
+#define TCU_REG_OST_CNTHBUF	0xfc
+
+#define TCU_TCSR_RESERVED_BITS		0x3f
+#define TCU_TCSR_PARENT_CLOCK_MASK	0x07
+#define TCU_TCSR_PRESCALE_LSB		3
+#define TCU_TCSR_PRESCALE_MASK		0x38
+
+#define TCU_TCSR_PWM_SD		BIT(9)	/* 0: Shutdown abruptly 1: gracefully */
+#define TCU_TCSR_PWM_INITL_HIGH	BIT(8)	/* Sets the initial output level */
+#define TCU_TCSR_PWM_EN		BIT(7)	/* PWM pin output enable */
+
+#define TCU_CHANNEL_STRIDE	0x10
+#define TCU_REG_TDFRc(c)	(TCU_REG_TDFR0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TDHRc(c)	(TCU_REG_TDHR0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TCNTc(c)	(TCU_REG_TCNT0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TCSRc(c)	(TCU_REG_TCSR0 + ((c) * TCU_CHANNEL_STRIDE))
+
+#endif /* __LINUX_CLK_INGENIC_TCU_H_ */
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks
  2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
  2018-03-17 23:28             ` [PATCH v4 1/8] mfd: syscon: Add ingenic-tcu.h header Paul Cercueil
@ 2018-03-17 23:28             ` Paul Cercueil
  2018-03-19 21:27               ` Stephen Boyd
  2018-03-20  7:15               ` Mathieu Malaterre
  2018-03-17 23:28             ` [PATCH v4 3/8] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
                               ` (6 subsequent siblings)
  8 siblings, 2 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-03-17 23:28 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc, Paul Cercueil

This header provides clock numbers for the ingenic,tcu
DT binding.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 include/dt-bindings/clock/ingenic,tcu.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 include/dt-bindings/clock/ingenic,tcu.h

 v2: Use SPDX identifier for the license
 v3: No change
 v4: No change

diff --git a/include/dt-bindings/clock/ingenic,tcu.h b/include/dt-bindings/clock/ingenic,tcu.h
new file mode 100644
index 000000000000..179815d7b3bb
--- /dev/null
+++ b/include/dt-bindings/clock/ingenic,tcu.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,tcu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+#define __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+
+#define JZ4740_CLK_TIMER0	0
+#define JZ4740_CLK_TIMER1	1
+#define JZ4740_CLK_TIMER2	2
+#define JZ4740_CLK_TIMER3	3
+#define JZ4740_CLK_TIMER4	4
+#define JZ4740_CLK_TIMER5	5
+#define JZ4740_CLK_TIMER6	6
+#define JZ4740_CLK_TIMER7	7
+#define JZ4740_CLK_WDT		8
+#define JZ4740_CLK_LAST		JZ4740_CLK_WDT
+
+#define JZ4770_CLK_OST		9
+#define JZ4770_CLK_LAST		JZ4770_CLK_OST
+
+#endif /* __DT_BINDINGS_CLOCK_INGENIC_TCU_H__ */
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v4 3/8] doc: Add doc for the Ingenic TCU hardware
  2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
  2018-03-17 23:28             ` [PATCH v4 1/8] mfd: syscon: Add ingenic-tcu.h header Paul Cercueil
  2018-03-17 23:28             ` [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
@ 2018-03-17 23:28             ` Paul Cercueil
  2018-03-17 23:52               ` Randy Dunlap
  2018-03-17 23:28             ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
                               ` (5 subsequent siblings)
  8 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-03-17 23:28 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc, Paul Cercueil

Add a documentation file about the Timer/Counter Unit (TCU)
present in the Ingenic JZ47xx SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 Documentation/mips/00-INDEX        |  3 +++
 Documentation/mips/ingenic-tcu.txt | 50 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 Documentation/mips/ingenic-tcu.txt

 v4: New patch in this series

diff --git a/Documentation/mips/00-INDEX b/Documentation/mips/00-INDEX
index 8ae9cffc2262..8ab8c3f83771 100644
--- a/Documentation/mips/00-INDEX
+++ b/Documentation/mips/00-INDEX
@@ -2,3 +2,6 @@
 	- this file.
 AU1xxx_IDE.README
 	- README for MIPS AU1XXX IDE driver.
+ingenic-tcu.txt
+	- Information file about the Timer/Counter Unit present
+	  in Ingenic JZ47xx SoCs.
diff --git a/Documentation/mips/ingenic-tcu.txt b/Documentation/mips/ingenic-tcu.txt
new file mode 100644
index 000000000000..2508e5793da8
--- /dev/null
+++ b/Documentation/mips/ingenic-tcu.txt
@@ -0,0 +1,50 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit hardware
+-----------------------------------------------
+
+The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function
+hardware block. It features eight channels, that can be used as counters,
+timers, or PWM.
+
+- JZ4770 introduced a separate channel, called Operating System Timer (OST).
+  It is a 64-bit programmable timer.
+
+- Each one of the eight channels has its own clock, which can be reparented
+  to three different clocks (pclk, ext, rtc), gated, and reclocked, through
+  their TCSR register.
+  * The watchdog and OST hardware blocks also feature a TCSR register with
+	the same format in their register space.
+  * The TCU registers used to gate/ungate can also gate/ungate the watchdog
+	and OST clocks.
+
+- On SoCs >= JZ4770, there are two different modes:
+  * Channels 0, 3-7 operate in TCU1 mode: they cannot work in sleep mode,
+	but are easier to operate.
+  * Channels 1-2 operate in TCU2 mode: they can work in sleep mode, but
+	the operation is a bit more complicated than with TCU1 channels.
+
+- Each channel can generate an interrupt. Some channels share an interrupt
+  line, some don't, and this changes between SoC versions:
+  * on JZ4740, timer 0 and timer 1 have their own interrupt line; others share
+	one interrupt line.
+  * on JZ4770 and JZ4780, timer 5 has its own interrupt; timers 0-4 and 6-7 all
+	use one interrupt line; the OST uses the last interrupt.
+
+Implementation
+--------------
+
+The functionalities of the TCU hardware are spread across multiple drivers:
+- interrupts:   drivers/irqchip/irq-ingenic-tcu.c
+- clocks:       drivers/clk/ingenic/tcu.c
+- timer:        drivers/clocksource/timer-ingenic.c
+- PWM:          drivers/pwm/pwm-jz4740.c
+- watchdog:     drivers/watchdog/jz4740_wdt.c
+- OST:			(none yet)
+
+Because various functionalities of the TCU that belong to different drivers
+and frameworks can be controlled from the same registers, all of these drivers
+access their registers through the same regmap.
+
+In practice, the devicetree nodes for all of these drivers must be children
+of a "syscon" node that defines the register area.
+For more information regarding the devicetree bindings of the TCU drivers,
+have a look at Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers
  2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
                               ` (2 preceding siblings ...)
  2018-03-17 23:28             ` [PATCH v4 3/8] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
@ 2018-03-17 23:28             ` Paul Cercueil
  2018-03-20  8:52               ` Marc Zyngier
  2018-03-27 14:46               ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Rob Herring
  2018-03-17 23:28             ` [PATCH v4 5/8] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
                               ` (4 subsequent siblings)
  8 siblings, 2 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-03-17 23:28 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc, Paul Cercueil

Add documentation about how to properly use the Ingenic TCU
(Timer/Counter Unit) drivers from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/clock/ingenic,tcu-clocks.txt          | 42 ++++++++++++++++
 .../bindings/interrupt-controller/ingenic,tcu.txt  | 39 +++++++++++++++
 .../devicetree/bindings/mfd/ingenic,tcu.txt        | 56 ++++++++++++++++++++++
 .../devicetree/bindings/timer/ingenic,tcu.txt      | 41 ++++++++++++++++
 4 files changed, 178 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
 create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt

 v4: New patch in this series. Corresponds to V2 patches 3-4-5 with
 added content.

diff --git a/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
new file mode 100644
index 000000000000..471d27078599
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
@@ -0,0 +1,42 @@
+Ingenic SoC TCU binding
+
+The TCU is the Timer/Counter Unit present in all Ingenic SoCs. It features 8
+channels, each one having its own clock, that can be started and stopped,
+reparented, and reclocked.
+
+Required properties:
+- compatible : One of:
+  * ingenic,jz4740-tcu-clocks,
+  * ingenic,jz4770-tcu-clocks,
+  * ingenic,jz4780-tcu-clocks.
+- clocks : List of phandle & clock specifiers for clocks external to the TCU.
+  The "pclk", "rtc" and "ext" clocks should be provided.
+- clock-names : List of name strings for the external clocks.
+- #clock-cells: Should be 1.
+  Clock consumers specify this argument to identify a clock. The valid values
+  may be found in <dt-bindings/clock/ingenic,tcu.h>.
+
+Example:
+
+/ {
+	tcu: mfd@10002000 {
+		compatible = "ingenic,tcu", "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		tcu_clk: clocks@10 {
+			compatible = "ingenic,jz4740-tcu-clocks";
+			reg = <0x10 0xff0>;
+
+			clocks = <&ext>, <&rtc>, <&pclk>;
+			clock-names = "ext", "rtc", "pclk";
+
+			#clock-cells = <1>;
+		};
+	};
+};
+
+For information about the top-level "ingenic,tcu" compatible node and other
+children nodes, see Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
new file mode 100644
index 000000000000..7f3af2da77cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
@@ -0,0 +1,39 @@
+Ingenic SoCs Timer/Counter Unit Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
+  * ingenic,jz4740-tcu-intc
+  * ingenic,jz4770-tcu-intc
+  * ingenic,jz4780-tcu-intc
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+- interrupt-parent : phandle of the interrupt controller.
+- interrupts : Specifies the interrupt the controller is connected to.
+
+Example:
+
+/ {
+	tcu: mfd@10002000 {
+		compatible = "ingenic,tcu", "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		tcu_irq: interrupt-controller@20 {
+			compatible = "ingenic,jz4740-tcu-intc";
+			reg = <0x20 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+	};
+};
+
+For information about the top-level "ingenic,tcu" compatible node and other
+children nodes, see Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
diff --git a/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
new file mode 100644
index 000000000000..5742c3f21550
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
@@ -0,0 +1,56 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
+----------------------------------------------------------
+
+For a description of the TCU hardware and drivers, have a look at
+Documentation/mips/ingenic-tcu.txt.
+
+The TCU is implemented as a parent node, whose role is to create the
+regmap, and child nodes for the various drivers listed in the aforementioned
+document.
+
+Required properties:
+
+- compatible: must be "ingenic,tcu", "simple-mfd", "syscon";
+- reg: Should be the offset/length value corresponding to the TCU registers
+- #address-cells: Should be <1>;
+- #size-cells: Should be <1>;
+- ranges: Should be one range for the full TCU registers area
+
+Accepted children nodes:
+- Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
+- Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
+- Documentation/devicetree/bindings/timer/ingenic,tcu.txt
+
+
+Example:
+
+/ {
+	tcu: mfd@10002000 {
+		compatible = "ingenic,tcu", "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		tcu_irq: interrupt-controller@20 {
+			compatible = "ingenic,jz4740-tcu-intc";
+			reg = <0x20 0x20>;
+			...
+		};
+
+		tcu_clk: clocks@10 {
+			compatible = "ingenic,jz4740-tcu-clocks";
+			reg = <0x10 0xff0>;
+			...
+		};
+
+		tcu_timer: timer@10 {
+			compatible = "ingenic,jz4740-tcu";
+			reg = <0x10 0xff0>;
+			...
+		};
+	};
+};
+
+For more information about the children node, refer to the documents listed
+above in the "Accepted children nodes" section.
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
new file mode 100644
index 000000000000..f910b7e96783
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
@@ -0,0 +1,41 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit driver
+---------------------------------------------
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
+  * ingenic,jz4740-tcu
+  * ingenic,jz4770-tcu
+  * ingenic,jz4780-tcu
+- interrupt-parent : phandle of the TCU interrupt controller.
+- interrupts : Specifies the interrupts the controller is connected to.
+- clocks : List of phandle & clock specifiers for the TCU clocks.
+- clock-names : List of name strings for the TCU clocks.
+
+Example:
+
+/ {
+	tcu: mfd@10002000 {
+		compatible = "ingenic,tcu", "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		tcu_timer: timer@10 {
+			compatible = "ingenic,jz4740-tcu";
+			reg = <0x10 0xff0>;
+
+			clocks = <&tcu_clk 0>, <&tcu_clk 1>, <&tcu_clk 2>, <&tcu_clk 3>,
+					 <&tcu_clk 4>, <&tcu_clk 5>, <&tcu_clk 6>, <&tcu_clk 7>;
+			clock-names = "timer0", "timer1", "timer2", "timer3",
+						  "timer4", "timer5", "timer6", "timer7";
+
+			interrupt-parent = <&tcu_irq>;
+			interrupts = <0 1 2 3 4 5 6 7>;
+		};
+	};
+};
+
+For information about the top-level "ingenic,tcu" compatible node and other
+children nodes, see Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v4 5/8] irqchip: Add the ingenic-tcu-intc driver
  2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
                               ` (3 preceding siblings ...)
  2018-03-17 23:28             ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
@ 2018-03-17 23:28             ` Paul Cercueil
  2018-03-17 23:28             ` [PATCH v4 6/8] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
                               ` (3 subsequent siblings)
  8 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-03-17 23:28 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc, Paul Cercueil

This simple driver handles the IRQ chip of the TCU
(Timer Counter Unit) of the JZ47xx Ingenic SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/irqchip/Kconfig           |   6 ++
 drivers/irqchip/Makefile          |   1 +
 drivers/irqchip/irq-ingenic-tcu.c | 161 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 168 insertions(+)
 create mode 100644 drivers/irqchip/irq-ingenic-tcu.c

 v2: - Use SPDX identifier for the license
     - Make KConfig option select CONFIG_IRQ_DOMAIN since we depend on it
 v3: - Move documentation to its own patch
     - Add comment explaining why we only use IRQCHIP_DECLARE
 v4: - Rename variables to avoid splitting long lines
     - Add comment about the multiple IRQ parents

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index d913aec85109..2b56587d04ed 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -267,6 +267,12 @@ config INGENIC_IRQ
 	depends on MACH_INGENIC
 	default y
 
+config INGENIC_TCU_IRQ
+	bool
+	depends on MACH_INGENIC || COMPILE_TEST
+	select IRQ_DOMAIN
+	default y
+
 config RENESAS_H8300H_INTC
         bool
 	select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index d27e3e3619e0..48b0bdf2b1a2 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_RENESAS_H8300H_INTC)	+= irq-renesas-h8300h.o
 obj-$(CONFIG_RENESAS_H8S_INTC)		+= irq-renesas-h8s.o
 obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
 obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
+obj-$(CONFIG_INGENIC_TCU_IRQ)		+= irq-ingenic-tcu.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
 obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
diff --git a/drivers/irqchip/irq-ingenic-tcu.c b/drivers/irqchip/irq-ingenic-tcu.c
new file mode 100644
index 000000000000..add3e9cc6f82
--- /dev/null
+++ b/drivers/irqchip/irq-ingenic-tcu.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU IRQ driver
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/syscon/ingenic-tcu.h>
+
+static void ingenic_tcu_intc_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
+	struct irq_domain *domain = irq_desc_get_handler_data(desc);
+	struct irq_chip_generic *gc = irq_get_domain_generic_chip(domain, 0);
+	struct regmap *map = gc->private;
+	uint32_t irq_reg, irq_mask;
+	unsigned int i;
+
+	regmap_read(map, TCU_REG_TFR, &irq_reg);
+	regmap_read(map, TCU_REG_TMR, &irq_mask);
+
+	chained_irq_enter(irq_chip, desc);
+
+	irq_reg &= ~irq_mask;
+
+	for (i = 0; i < 32; i++) {
+		if (irq_reg & BIT(i))
+			generic_handle_irq(irq_linear_revmap(domain, i));
+	}
+
+	chained_irq_exit(irq_chip, desc);
+}
+
+static void ingenic_tcu_gc_unmask_enable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.ack, mask);
+	regmap_write(map, ct->regs.enable, mask);
+	*ct->mask_cache |= mask;
+	irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.disable, mask);
+	*ct->mask_cache &= ~mask;
+	irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg_and_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.ack, mask);
+	regmap_write(map, ct->regs.disable, mask);
+	irq_gc_unlock(gc);
+}
+
+static int __init ingenic_tcu_intc_of_init(struct device_node *node,
+	struct device_node *parent)
+{
+	struct irq_domain *domain;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	int err, i, irqs;
+	u32 parent_irqs[3];
+	struct regmap *map;
+
+	irqs = of_property_count_elems_of_size(node, "interrupts", sizeof(u32));
+	if (irqs < 0 || irqs > ARRAY_SIZE(parent_irqs))
+		return -EINVAL;
+
+	map = syscon_node_to_regmap(node->parent);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops, NULL);
+	if (!domain)
+		return -ENOMEM;
+
+	err = irq_alloc_domain_generic_chips(domain, 32, 1, "TCU",
+			handle_level_irq, 0, IRQ_NOPROBE | IRQ_LEVEL, 0);
+	if (err)
+		goto out_domain_remove;
+
+	gc = irq_get_domain_generic_chip(domain, 0);
+	ct = gc->chip_types;
+
+	gc->wake_enabled = IRQ_MSK(32);
+	gc->private = map;
+
+	ct->regs.disable = TCU_REG_TMSR;
+	ct->regs.enable = TCU_REG_TMCR;
+	ct->regs.ack = TCU_REG_TFCR;
+	ct->chip.irq_unmask = ingenic_tcu_gc_unmask_enable_reg;
+	ct->chip.irq_mask = ingenic_tcu_gc_mask_disable_reg;
+	ct->chip.irq_mask_ack = ingenic_tcu_gc_mask_disable_reg_and_ack;
+	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
+
+	/* Mask all IRQs by default */
+	regmap_write(map, TCU_REG_TMSR, IRQ_MSK(32));
+
+	/* On JZ4740, timer 0 and timer 1 have their own interrupt line;
+	 * timers 2-7 share one interrupt.
+	 * On SoCs >= JZ4770, timer 5 has its own interrupt line;
+	 * timers 0-4 and 6-7 share one single interrupt.
+	 *
+	 * To keep things simple, we just register the same handler to
+	 * all parent interrupts. The handler will properly detect which
+	 * channel fired the interrupt.
+	 */
+	for (i = 0; i < irqs; i++) {
+		parent_irqs[i] = irq_of_parse_and_map(node, i);
+		if (!parent_irqs[i]) {
+			err = -EINVAL;
+			goto out_unmap_irqs;
+		}
+
+		irq_set_chained_handler_and_data(parent_irqs[i],
+				ingenic_tcu_intc_cascade, domain);
+	}
+
+	return 0;
+
+out_unmap_irqs:
+	for (; i > 0; i--)
+		irq_dispose_mapping(parent_irqs[i - 1]);
+out_domain_remove:
+	irq_domain_remove(domain);
+	return err;
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+IRQCHIP_DECLARE(jz4740_tcu_intc, "ingenic,jz4740-tcu-intc",
+		ingenic_tcu_intc_of_init);
+IRQCHIP_DECLARE(jz4770_tcu_intc, "ingenic,jz4770-tcu-intc",
+		ingenic_tcu_intc_of_init);
+IRQCHIP_DECLARE(jz4780_tcu_intc, "ingenic,jz4780-tcu-intc",
+		ingenic_tcu_intc_of_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v4 6/8] clk: ingenic: Add JZ47xx TCU clocks driver
  2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
                               ` (4 preceding siblings ...)
  2018-03-17 23:28             ` [PATCH v4 5/8] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
@ 2018-03-17 23:28             ` Paul Cercueil
  2018-03-17 23:29             ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver Paul Cercueil
                               ` (2 subsequent siblings)
  8 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-03-17 23:28 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc, Paul Cercueil

The TCU (Timer Counter Unit) of the Ingenic JZ47xx SoCs features 8
channels, each one having its own clock, that can be started and
stopped, reparented, and reclocked.

This driver only modifies the bits of the registers of the TCU that are
related to clocks control. It provides one clock per TCU channel (plus
one for the watchdog and one for the OS timer) that can be used by other
drivers.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/Makefile |   2 +-
 drivers/clk/ingenic/tcu.c    | 319 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 320 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ingenic/tcu.c

 v2: - Use SPDX identifier for the license
     - Fix broken build caused by typo when correcting patch
 v3: - Move documentation to its own patch
     - Get rid of ingenic_tcu structure. The "struct regmap *map" was
	   added to struct ingenic_tcu_clk, the other fields are gone.
	 - Replace clk_register / clk_register_clockdev /
	   of_clk_add_provider with their "clk_hw" variant.
 v4: No change

diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index 1456e4cdb562..9dcadd4fed4c 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -1,4 +1,4 @@
-obj-y				+= cgu.o
+obj-y				+= cgu.o tcu.o
 obj-$(CONFIG_MACH_JZ4740)	+= jz4740-cgu.o
 obj-$(CONFIG_MACH_JZ4770)	+= jz4770-cgu.o
 obj-$(CONFIG_MACH_JZ4780)	+= jz4780-cgu.o
diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
new file mode 100644
index 000000000000..b550b6ac8fb4
--- /dev/null
+++ b/drivers/clk/ingenic/tcu.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx SoC TCU clocks driver
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/ingenic-tcu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+enum ingenic_version {
+	ID_JZ4740,
+	ID_JZ4770,
+	ID_JZ4780,
+};
+
+struct ingenic_tcu_clk_info {
+	struct clk_init_data init_data;
+	u8 gate_bit;
+	u8 tcsr_reg;
+};
+
+struct ingenic_tcu_clk {
+	struct clk_hw hw;
+
+	struct regmap *map;
+	const struct ingenic_tcu_clk_info *info;
+
+	unsigned int idx;
+};
+
+#define to_tcu_clk(_hw) container_of(_hw, struct ingenic_tcu_clk, hw)
+
+static int ingenic_tcu_enable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+
+	regmap_write(tcu_clk->map, TCU_REG_TSCR, BIT(info->gate_bit));
+	return 0;
+}
+
+static void ingenic_tcu_disable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+
+	regmap_write(tcu_clk->map, TCU_REG_TSSR, BIT(info->gate_bit));
+}
+
+static int ingenic_tcu_is_enabled(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int value;
+
+	regmap_read(tcu_clk->map, TCU_REG_TSR, &value);
+
+	return !(value & BIT(info->gate_bit));
+}
+
+static u8 ingenic_tcu_get_parent(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int val = 0;
+	int ret;
+
+	ret = regmap_read(tcu_clk->map, info->tcsr_reg, &val);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	return ffs(val & TCU_TCSR_PARENT_CLOCK_MASK) - 1;
+}
+
+static int ingenic_tcu_set_parent(struct clk_hw *hw, u8 idx)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct regmap *map = tcu_clk->map;
+	int ret;
+
+	/*
+	 * Our clock provider has the CLK_SET_PARENT_GATE flag set, so we know
+	 * that the clk is in unprepared state. To be able to access TCSR
+	 * we must ungate the clock supply and we gate it again when done.
+	 */
+
+	regmap_write(map, TCU_REG_TSCR, BIT(info->gate_bit));
+
+	ret = regmap_update_bits(map, info->tcsr_reg,
+			TCU_TCSR_PARENT_CLOCK_MASK, BIT(idx));
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	regmap_write(map, TCU_REG_TSSR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static unsigned long ingenic_tcu_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int prescale;
+	int ret;
+
+	ret = regmap_read(tcu_clk->map, info->tcsr_reg, &prescale);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	prescale = (prescale & TCU_TCSR_PRESCALE_MASK) >> TCU_TCSR_PRESCALE_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long *parent_rate)
+{
+	unsigned long rate = *parent_rate;
+	unsigned int shift;
+
+	if (req_rate > rate)
+		return -EINVAL;
+
+	for (shift = 0; shift < 10; shift += 2)
+		if ((rate >> shift) <= req_rate)
+			break;
+
+	return rate >> shift;
+}
+
+static int ingenic_tcu_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct regmap *map = tcu_clk->map;
+	u8 prescale = (ffs(parent_rate / req_rate) / 2)
+			<< TCU_TCSR_PRESCALE_LSB;
+	int ret;
+
+	/*
+	 * Our clock provider has the CLK_SET_RATE_GATE flag set, so we know
+	 * that the clk is in unprepared state. To be able to access TCSR
+	 * we must ungate the clock supply and we gate it again when done.
+	 */
+
+	regmap_write(map, TCU_REG_TSCR, BIT(info->gate_bit));
+
+	ret = regmap_update_bits(map, info->tcsr_reg,
+				TCU_TCSR_PRESCALE_MASK, prescale);
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	regmap_write(map, TCU_REG_TSSR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static const struct clk_ops ingenic_tcu_clk_ops = {
+	.get_parent	= ingenic_tcu_get_parent,
+	.set_parent	= ingenic_tcu_set_parent,
+
+	.recalc_rate	= ingenic_tcu_recalc_rate,
+	.round_rate	= ingenic_tcu_round_rate,
+	.set_rate	= ingenic_tcu_set_rate,
+
+	.enable		= ingenic_tcu_enable,
+	.disable	= ingenic_tcu_disable,
+	.is_enabled	= ingenic_tcu_is_enabled,
+};
+
+static const char * const ingenic_tcu_timer_parents[] = {
+	"pclk",
+	"rtc",
+	"ext",
+};
+
+static const struct ingenic_tcu_clk_info ingenic_tcu_clk_info[] = {
+#define DEF_TIMER(_name, _gate_bit, _tcsr)				\
+	{								\
+		.init_data = {						\
+			.name = _name,					\
+			.parent_names = ingenic_tcu_timer_parents,	\
+			.num_parents = ARRAY_SIZE(ingenic_tcu_timer_parents),\
+			.ops = &ingenic_tcu_clk_ops,			\
+			.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE,\
+		},							\
+		.gate_bit = _gate_bit,					\
+		.tcsr_reg = _tcsr,					\
+	}
+	[JZ4740_CLK_TIMER0] = DEF_TIMER("timer0", 0, TCU_REG_TCSRc(0)),
+	[JZ4740_CLK_TIMER1] = DEF_TIMER("timer1", 1, TCU_REG_TCSRc(1)),
+	[JZ4740_CLK_TIMER2] = DEF_TIMER("timer2", 2, TCU_REG_TCSRc(2)),
+	[JZ4740_CLK_TIMER3] = DEF_TIMER("timer3", 3, TCU_REG_TCSRc(3)),
+	[JZ4740_CLK_TIMER4] = DEF_TIMER("timer4", 4, TCU_REG_TCSRc(4)),
+	[JZ4740_CLK_TIMER5] = DEF_TIMER("timer5", 5, TCU_REG_TCSRc(5)),
+	[JZ4740_CLK_TIMER6] = DEF_TIMER("timer6", 6, TCU_REG_TCSRc(6)),
+	[JZ4740_CLK_TIMER7] = DEF_TIMER("timer7", 7, TCU_REG_TCSRc(7)),
+	[JZ4740_CLK_WDT]    = DEF_TIMER("wdt",   16, TCU_REG_WDT_TCSR),
+	[JZ4770_CLK_OST]    = DEF_TIMER("ost",   15, TCU_REG_OST_TCSR),
+#undef DEF_TIMER
+};
+
+static int ingenic_tcu_register_clock(struct regmap *map, unsigned int idx,
+		const struct ingenic_tcu_clk_info *info,
+		struct clk_hw_onecell_data *clocks)
+{
+	struct ingenic_tcu_clk *tcu_clk;
+	int err;
+
+	tcu_clk = kzalloc(sizeof(*tcu_clk), GFP_KERNEL);
+	if (!tcu_clk)
+		return -ENOMEM;
+
+	tcu_clk->hw.init = &info->init_data;
+	tcu_clk->idx = idx;
+	tcu_clk->info = info;
+	tcu_clk->map = map;
+
+	/* Set EXT as the default parent clock */
+	ingenic_tcu_set_parent(&tcu_clk->hw, 2);
+
+	ingenic_tcu_disable(&tcu_clk->hw);
+
+	err = clk_hw_register(NULL, &tcu_clk->hw);
+	if (err)
+		goto err_free_tcu_clk;
+
+	err = clk_hw_register_clkdev(&tcu_clk->hw, info->init_data.name, NULL);
+	if (err)
+		goto err_clk_unregister;
+
+	clocks->hws[idx] = &tcu_clk->hw;
+	return 0;
+
+err_clk_unregister:
+	clk_hw_unregister(&tcu_clk->hw);
+err_free_tcu_clk:
+	kfree(tcu_clk);
+	return err;
+}
+
+static void __init ingenic_tcu_init(struct device_node *np,
+		enum ingenic_version id)
+{
+	struct clk_hw_onecell_data *clocks;
+	struct regmap *map;
+	size_t i, nb_clks;
+	int ret = -ENOMEM;
+
+	if (id >= ID_JZ4770)
+		nb_clks = (JZ4770_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
+	else
+		nb_clks = (JZ4740_CLK_LAST - JZ4740_CLK_TIMER0) + 1;
+
+	map = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(map)) {
+		pr_err("%s: failed to map TCU registers\n", __func__);
+		return;
+	}
+
+	clocks = kzalloc(sizeof(*clocks) +
+					 sizeof(*clocks->hws) * nb_clks,
+					 GFP_KERNEL);
+	if (!clocks)
+		return;
+
+	clocks->num = nb_clks;
+
+	for (i = 0; i < nb_clks; i++) {
+		ret = ingenic_tcu_register_clock(map, i,
+				&ingenic_tcu_clk_info[JZ4740_CLK_TIMER0 + i],
+				clocks);
+		if (ret) {
+			pr_err("%s: cannot register clocks\n", __func__);
+			goto err_unregister;
+		}
+	}
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clocks);
+	if (ret) {
+		pr_err("%s: cannot add OF clock provider\n", __func__);
+		goto err_unregister;
+	}
+
+	return;
+
+err_unregister:
+	for (i = 0; i < clocks->num; i++)
+		if (clocks->hws[i])
+			clk_hw_unregister(clocks->hws[i]);
+	kfree(clocks);
+}
+
+static void __init jz4740_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4740);
+}
+
+static void __init jz4770_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4770);
+}
+
+static void __init jz4780_tcu_init(struct device_node *np)
+{
+	ingenic_tcu_init(np, ID_JZ4780);
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+CLK_OF_DECLARE(jz4740_tcu, "ingenic,jz4740-tcu-clocks", jz4740_tcu_init);
+CLK_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu-clocks", jz4770_tcu_init);
+CLK_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu-clocks", jz4780_tcu_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver
  2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
                               ` (5 preceding siblings ...)
  2018-03-17 23:28             ` [PATCH v4 6/8] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
@ 2018-03-17 23:29             ` Paul Cercueil
  2018-03-24  6:26               ` Daniel Lezcano
  2018-03-17 23:29             ` [PATCH v4 8/8] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
  2018-03-18 22:13             ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Daniel Lezcano
  8 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-03-17 23:29 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc, Paul Cercueil

This driver will use the TCU (Timer Counter Unit) present on the Ingenic
JZ47xx SoCs to provide the kernel with a clocksource and timers.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/clocksource/Kconfig         |   8 ++
 drivers/clocksource/Makefile        |   1 +
 drivers/clocksource/timer-ingenic.c | 278 ++++++++++++++++++++++++++++++++++++
 3 files changed, 287 insertions(+)
 create mode 100644 drivers/clocksource/timer-ingenic.c

 v2: Use SPDX identifier for the license
 v3: - Move documentation to its own patch
     - Search the devicetree for PWM clients, and use all the TCU
	   channels that won't be used for PWM
 v4: - Add documentation about why we search for PWM clients
     - Verify that the PWM clients are for the TCU PWM driver

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index d2e5382821a4..481422145fb4 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -592,4 +592,12 @@ config CLKSRC_ST_LPC
 	  Enable this option to use the Low Power controller timer
 	  as clocksource.
 
+config INGENIC_TIMER
+	bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
+	depends on MACH_INGENIC || COMPILE_TEST
+	select CLKSRC_OF
+	default y
+	help
+	  Support for the timer/counter unit of the Ingenic JZ SoCs.
+
 endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index d6dec4489d66..98691e8999fe 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -74,5 +74,6 @@ obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
+obj-$(CONFIG_INGENIC_TIMER)		+= timer-ingenic.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
diff --git a/drivers/clocksource/timer-ingenic.c b/drivers/clocksource/timer-ingenic.c
new file mode 100644
index 000000000000..8c777c0c0023
--- /dev/null
+++ b/drivers/clocksource/timer-ingenic.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx SoC TCU clocksource driver
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/ingenic-tcu.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define NUM_CHANNELS	8
+
+struct ingenic_tcu;
+
+struct ingenic_tcu_channel {
+	unsigned int idx;
+	struct clk *clk;
+};
+
+struct ingenic_tcu {
+	struct ingenic_tcu_channel channels[NUM_CHANNELS];
+	unsigned long requested;
+	struct regmap *map;
+};
+
+struct ingenic_clock_event_device {
+	struct clock_event_device cevt;
+	struct ingenic_tcu_channel *channel;
+	char name[32];
+};
+
+#define ingenic_cevt(_evt) \
+	container_of(_evt, struct ingenic_clock_event_device, cevt)
+
+static inline struct ingenic_tcu *to_ingenic_tcu(struct ingenic_tcu_channel *ch)
+{
+	return container_of(ch, struct ingenic_tcu, channels[ch->idx]);
+}
+
+static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	regmap_write(tcu->map, TCU_REG_TECR, BIT(idx));
+	return 0;
+}
+
+static int ingenic_tcu_cevt_set_next(unsigned long next,
+		struct clock_event_device *evt)
+{
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	if (next > 0xffff)
+		return -EINVAL;
+
+	regmap_write(tcu->map, TCU_REG_TDFRc(idx), (unsigned int) next);
+	regmap_write(tcu->map, TCU_REG_TCNTc(idx), 0);
+	regmap_write(tcu->map, TCU_REG_TESR, BIT(idx));
+
+	return 0;
+}
+
+static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
+{
+	struct clock_event_device *cevt = dev_id;
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(cevt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	regmap_write(tcu->map, TCU_REG_TECR, BIT(idx));
+
+	if (cevt->event_handler)
+		cevt->event_handler(cevt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ingenic_tcu_req_channel(struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	char buf[16];
+	int err;
+
+	if (test_and_set_bit(channel->idx, &tcu->requested))
+		return -EBUSY;
+
+	snprintf(buf, sizeof(buf), "timer%u", channel->idx);
+	channel->clk = clk_get(NULL, buf);
+	if (IS_ERR(channel->clk)) {
+		err = PTR_ERR(channel->clk);
+		goto out_release;
+	}
+
+	err = clk_prepare_enable(channel->clk);
+	if (err)
+		goto out_clk_put;
+
+	return 0;
+
+out_clk_put:
+	clk_put(channel->clk);
+out_release:
+	clear_bit(channel->idx, &tcu->requested);
+	return err;
+}
+
+static int __init ingenic_tcu_reset_channel(struct device_node *np,
+		struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+
+	return regmap_update_bits(tcu->map, TCU_REG_TCSRc(channel->idx),
+				0xffff & ~TCU_TCSR_RESERVED_BITS, 0);
+}
+
+static void __init ingenic_tcu_free_channel(struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+
+	clk_disable_unprepare(channel->clk);
+	clk_put(channel->clk);
+	clear_bit(channel->idx, &tcu->requested);
+}
+
+static const char * const ingenic_tcu_timer_names[] = {
+	"TCU0", "TCU1", "TCU2", "TCU3", "TCU4", "TCU5", "TCU6", "TCU7",
+};
+
+static int __init ingenic_tcu_setup_cevt(struct device_node *np,
+		struct ingenic_tcu *tcu, unsigned int idx)
+{
+	struct ingenic_tcu_channel *channel = &tcu->channels[idx];
+	struct ingenic_clock_event_device *jzcevt;
+	unsigned long rate;
+	int err, virq;
+
+	err = ingenic_tcu_req_channel(channel);
+	if (err)
+		return err;
+
+	err = ingenic_tcu_reset_channel(np, channel);
+	if (err)
+		goto err_out_free_channel;
+
+	rate = clk_get_rate(channel->clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_out_free_channel;
+	}
+
+	jzcevt = kzalloc(sizeof(*jzcevt), GFP_KERNEL);
+	if (!jzcevt) {
+		err = -ENOMEM;
+		goto err_out_free_channel;
+	}
+
+	virq = irq_of_parse_and_map(np, idx);
+	if (!virq) {
+		err = -EINVAL;
+		goto err_out_kfree_jzcevt;
+	}
+
+	err = request_irq(virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
+			ingenic_tcu_timer_names[idx], &jzcevt->cevt);
+	if (err)
+		goto err_out_irq_dispose_mapping;
+
+	jzcevt->channel = channel;
+	snprintf(jzcevt->name, sizeof(jzcevt->name), "ingenic-tcu-chan%u",
+		 channel->idx);
+
+	jzcevt->cevt.cpumask = cpumask_of(smp_processor_id());
+	jzcevt->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+	jzcevt->cevt.name = jzcevt->name;
+	jzcevt->cevt.rating = 200;
+	jzcevt->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+	jzcevt->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+
+	clockevents_config_and_register(&jzcevt->cevt, rate, 10, (1 << 16) - 1);
+
+	return 0;
+
+err_out_irq_dispose_mapping:
+	irq_dispose_mapping(virq);
+err_out_kfree_jzcevt:
+	kfree(jzcevt);
+err_out_free_channel:
+	ingenic_tcu_free_channel(channel);
+	return err;
+}
+
+static int __init ingenic_tcu_init(struct device_node *np)
+{
+	unsigned long available_channels = GENMASK(NUM_CHANNELS - 1, 0);
+	struct device_node *node, *pwm_driver_node;
+	struct ingenic_tcu *tcu;
+	unsigned int i, channel;
+	int err;
+	u32 val;
+
+	/* Parse the devicetree for clients of the TCU PWM driver;
+	 * every TCU channel not requested for PWM will be used as
+	 * a timer.
+	 */
+	for_each_node_with_property(node, "pwms") {
+		/* Get the PWM channel ID (field 1 of the "pwms" node) */
+		err = of_property_read_u32_index(node, "pwms", 1, &val);
+		if (!err && val >= NUM_CHANNELS)
+			err = -EINVAL;
+		if (err) {
+			pr_err("timer-ingenic: Unable to parse PWM nodes!");
+			break;
+		}
+
+		/* Get the PWM driver node (field 0 of the "pwms" node) */
+		pwm_driver_node = of_parse_phandle(node, "pwms", 0);
+		if (!pwm_driver_node) {
+			pr_err("timer-ingenic: Unable to find PWM driver node");
+			break;
+		}
+
+		/* Verify that the node we found is for the TCU PWM driver,
+		 * by checking that this driver and the PWM driver passed
+		 * as phandle share the same parent (the "ingenic,tcu"
+		 * compatible MFD/syscon node).
+		 */
+		if (pwm_driver_node->parent != np->parent)
+			continue;
+
+		pr_info("timer-ingenic: Reserving channel %u for PWM", val);
+		available_channels &= ~BIT(val);
+	}
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu)
+		return -ENOMEM;
+
+	tcu->map = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(tcu->map)) {
+		err = PTR_ERR(tcu->map);
+		kfree(tcu);
+		return err;
+	}
+
+	for (i = 0; i < NUM_CHANNELS; i++)
+		tcu->channels[i].idx = i;
+
+	for_each_set_bit(channel, &available_channels, NUM_CHANNELS) {
+		err = ingenic_tcu_setup_cevt(np, tcu, channel);
+		if (err) {
+			pr_warn("timer-ingenic: Unable to init TCU channel %u: %i",
+					channel, err);
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+CLOCKSOURCE_OF_DECLARE(jz4740_tcu, "ingenic,jz4740-tcu", ingenic_tcu_init);
+CLOCKSOURCE_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu", ingenic_tcu_init);
+CLOCKSOURCE_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu", ingenic_tcu_init);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* [PATCH v4 8/8] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
                               ` (6 preceding siblings ...)
  2018-03-17 23:29             ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver Paul Cercueil
@ 2018-03-17 23:29             ` Paul Cercueil
  2018-03-18 22:13             ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Daniel Lezcano
  8 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-03-17 23:29 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc, Paul Cercueil

Add myself as maintainer for the ingenic-tcu-intc interrupt controller
driver, the ingenic-tcu-clocks clock driver, and the ingenic-tcu
clocksource driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)

 v2: No change
 v3: No change
 v4: No change

diff --git a/MAINTAINERS b/MAINTAINERS
index 4623caf8d72d..46d3955b92aa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6959,6 +6959,15 @@ L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/nand/jz4780_*
 
+INGENIC JZ47xx TCU drivers
+M:	Paul Cercueil <paul@crapouillou.net>
+S:	Maintained
+F:	drivers/clk/ingenic/tcu.c
+F:	drivers/irqchip/irq-ingenic-tcu.c
+F:	drivers/clocksource/timer-ingenic.c
+F:	include/linux/mfd/syscon/ingenic-tcu.h
+F:	include/dt-bindings/clock/ingenic,tcu.h
+
 INOTIFY
 M:	Jan Kara <jack@suse.cz>
 R:	Amir Goldstein <amir73il@gmail.com>
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 3/8] doc: Add doc for the Ingenic TCU hardware
  2018-03-17 23:28             ` [PATCH v4 3/8] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
@ 2018-03-17 23:52               ` Randy Dunlap
  2018-03-28 14:59                 ` [PATCH v4 3/8] doc: Add doc for the Ingenic TCU hardware, Paul Cercueil
  0 siblings, 1 reply; 80+ messages in thread
From: Randy Dunlap @ 2018-03-17 23:52 UTC (permalink / raw)
  To: Paul Cercueil, Thomas Gleixner, Jason Cooper, Marc Zyngier,
	Lee Jones, Daniel Lezcano, Ralf Baechle, Rob Herring,
	Jonathan Corbet, Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

On 03/17/2018 04:28 PM, Paul Cercueil wrote:
> Add a documentation file about the Timer/Counter Unit (TCU)
> present in the Ingenic JZ47xx SoCs.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  Documentation/mips/00-INDEX        |  3 +++
>  Documentation/mips/ingenic-tcu.txt | 50 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 53 insertions(+)
>  create mode 100644 Documentation/mips/ingenic-tcu.txt
> 
>  v4: New patch in this series

> diff --git a/Documentation/mips/ingenic-tcu.txt b/Documentation/mips/ingenic-tcu.txt
> new file mode 100644
> index 000000000000..2508e5793da8
> --- /dev/null
> +++ b/Documentation/mips/ingenic-tcu.txt
> @@ -0,0 +1,50 @@
> +Ingenic JZ47xx SoCs Timer/Counter Unit hardware
> +-----------------------------------------------
> +
> +The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function
> +hardware block. It features eight channels, that can be used as counters,

                    drop comma ............. ^

> +timers, or PWM.
> +
> +- JZ4770 introduced a separate channel, called Operating System Timer (OST).
> +  It is a 64-bit programmable timer.
> +
> +- Each one of the eight channels has its own clock, which can be reparented
> +  to three different clocks (pclk, ext, rtc), gated, and reclocked, through
> +  their TCSR register.
> +  * The watchdog and OST hardware blocks also feature a TCSR register with
> +	the same format in their register space.
> +  * The TCU registers used to gate/ungate can also gate/ungate the watchdog
> +	and OST clocks.
> +
> +- On SoCs >= JZ4770, there are two different modes:
> +  * Channels 0, 3-7 operate in TCU1 mode: they cannot work in sleep mode,
> +	but are easier to operate.
> +  * Channels 1-2 operate in TCU2 mode: they can work in sleep mode, but
> +	the operation is a bit more complicated than with TCU1 channels.
> +
> +- Each channel can generate an interrupt. Some channels share an interrupt	
> +  line, some don't, and this changes between SoC versions:
> +  * on JZ4740, timer 0 and timer 1 have their own interrupt line; others share
> +	one interrupt line.
> +  * on JZ4770 and JZ4780, timer 5 has its own interrupt; timers 0-4 and 6-7 all
> +	use one interrupt line; the OST uses the last interrupt.

"The OST uses the last interrupt." is not clear to someone who doesn't know
about this hardware. (I can read it several ways.)

Does it mean that the 4770 and 4780 have 3 interrupt lines used like so?

- timer 5 uses one interrupt line
- timers 0-4 and 6-7 use a second interrupt line
- the OST uses a third interrupt line


thanks,
-- 
~Randy

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers
  2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
                               ` (7 preceding siblings ...)
  2018-03-17 23:29             ` [PATCH v4 8/8] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
@ 2018-03-18 22:13             ` Daniel Lezcano
  2018-03-28 15:01               ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers, Paul Cercueil
  8 siblings, 1 reply; 80+ messages in thread
From: Daniel Lezcano @ 2018-03-18 22:13 UTC (permalink / raw)
  To: Paul Cercueil, Thomas Gleixner, Jason Cooper, Marc Zyngier,
	Lee Jones, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

On 18/03/2018 00:28, Paul Cercueil wrote:
> Hi,
> 
> This is the 4th version of my TCU patchset.
> 
> The major change is a greatly improved documentation, both in-code
> and as separate text files, to describe how the hardware works and
> how the devicetree bindings should be used.
> 
> There are also cosmetic changes in the irqchip driver, and the
> clocksource driver will now use as timers all TCU channels not
> requested by the TCU PWM driver.

Hi Paul,

I don't know why but you series appears in reply to [PATCH v3 2/9]. Not
sure if it is my mailer or how you are sending the patches but if it is
the latter can you in the future, when resending a new version, not use
the in-reply-to option. It will be easier to follow the versions.

Thanks.

 -- Daniel



-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks
  2018-03-17 23:28             ` [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
@ 2018-03-19 21:27               ` Stephen Boyd
  2018-03-20  7:15               ` Mathieu Malaterre
  1 sibling, 0 replies; 80+ messages in thread
From: Stephen Boyd @ 2018-03-19 21:27 UTC (permalink / raw)
  To: Daniel Lezcano, Jason Cooper, Jonathan Corbet, Lee Jones,
	Marc Zyngier, Mark Rutland, Ralf Baechle, Rob Herring,
	Thomas Gleixner
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc, Paul Cercueil

Quoting Paul Cercueil (2018-03-17 16:28:55)
> This header provides clock numbers for the ingenic,tcu
> DT binding.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---

Acked-by: Stephen Boyd <sboyd@kernel.org>

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks
  2018-03-17 23:28             ` [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
  2018-03-19 21:27               ` Stephen Boyd
@ 2018-03-20  7:15               ` Mathieu Malaterre
  2018-03-28 15:04                 ` [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks, Paul Cercueil
  1 sibling, 1 reply; 80+ messages in thread
From: Mathieu Malaterre @ 2018-03-20  7:15 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland, James Hogan, Maarten ter Huurne, linux-clk,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML,
	Linux-MIPS, linux-doc

Hi Paul,

Two things:

On Sun, Mar 18, 2018 at 12:28 AM, Paul Cercueil <paul@crapouillou.net> wrote:
> This header provides clock numbers for the ingenic,tcu
> DT binding.

I have tested the whole series on my Creator CI20 with success, using:

+ tcu@10002000 {
+ compatible = "ingenic,jz4780-tcu";
+ reg = <0x10002000 0x140>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+ };


So:

Tested-by: Mathieu Malaterre <malat@debian.org>

> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>  include/dt-bindings/clock/ingenic,tcu.h | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 include/dt-bindings/clock/ingenic,tcu.h
>
>  v2: Use SPDX identifier for the license
>  v3: No change
>  v4: No change
>
> diff --git a/include/dt-bindings/clock/ingenic,tcu.h b/include/dt-bindings/clock/ingenic,tcu.h
> new file mode 100644
> index 000000000000..179815d7b3bb
> --- /dev/null
> +++ b/include/dt-bindings/clock/ingenic,tcu.h
> @@ -0,0 +1,23 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * This header provides clock numbers for the ingenic,tcu DT binding.
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
> +#define __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
> +
> +#define JZ4740_CLK_TIMER0      0
> +#define JZ4740_CLK_TIMER1      1
> +#define JZ4740_CLK_TIMER2      2
> +#define JZ4740_CLK_TIMER3      3
> +#define JZ4740_CLK_TIMER4      4
> +#define JZ4740_CLK_TIMER5      5
> +#define JZ4740_CLK_TIMER6      6
> +#define JZ4740_CLK_TIMER7      7
> +#define JZ4740_CLK_WDT         8
> +#define JZ4740_CLK_LAST                JZ4740_CLK_WDT
> +
> +#define JZ4770_CLK_OST         9
> +#define JZ4770_CLK_LAST                JZ4770_CLK_OST
> +

When working on JZ4780 support, I always struggle to read those kind
of #define. Since this is a new patch would you mind changing
s/JZ4740/JZ47XX/ in your header ?

Thanks for your work on JZ !

> +#endif /* __DT_BINDINGS_CLOCK_INGENIC_TCU_H__ */
> --
> 2.11.0
>
>

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers
  2018-03-17 23:28             ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
@ 2018-03-20  8:52               ` Marc Zyngier
  2018-03-28 15:09                 ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers, Paul Cercueil
  2018-03-27 14:46               ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Rob Herring
  1 sibling, 1 reply; 80+ messages in thread
From: Marc Zyngier @ 2018-03-20  8:52 UTC (permalink / raw)
  To: Paul Cercueil, Thomas Gleixner, Jason Cooper, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

On 17/03/18 23:28, Paul Cercueil wrote:
> Add documentation about how to properly use the Ingenic TCU
> (Timer/Counter Unit) drivers from devicetree.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  .../bindings/clock/ingenic,tcu-clocks.txt          | 42 ++++++++++++++++
>  .../bindings/interrupt-controller/ingenic,tcu.txt  | 39 +++++++++++++++
>  .../devicetree/bindings/mfd/ingenic,tcu.txt        | 56 ++++++++++++++++++++++
>  .../devicetree/bindings/timer/ingenic,tcu.txt      | 41 ++++++++++++++++
>  4 files changed, 178 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>  create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> 
>  v4: New patch in this series. Corresponds to V2 patches 3-4-5 with
>  added content.
> 
> diff --git a/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
> new file mode 100644
> index 000000000000..471d27078599
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
> @@ -0,0 +1,42 @@
> +Ingenic SoC TCU binding
> +
> +The TCU is the Timer/Counter Unit present in all Ingenic SoCs. It features 8
> +channels, each one having its own clock, that can be started and stopped,
> +reparented, and reclocked.
> +
> +Required properties:
> +- compatible : One of:
> +  * ingenic,jz4740-tcu-clocks,
> +  * ingenic,jz4770-tcu-clocks,
> +  * ingenic,jz4780-tcu-clocks.
> +- clocks : List of phandle & clock specifiers for clocks external to the TCU.
> +  The "pclk", "rtc" and "ext" clocks should be provided.
> +- clock-names : List of name strings for the external clocks.
> +- #clock-cells: Should be 1.
> +  Clock consumers specify this argument to identify a clock. The valid values
> +  may be found in <dt-bindings/clock/ingenic,tcu.h>.
> +
> +Example:
> +
> +/ {
> +	tcu: mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x10002000 0x1000>;
> +
> +		tcu_clk: clocks@10 {
> +			compatible = "ingenic,jz4740-tcu-clocks";
> +			reg = <0x10 0xff0>;
> +
> +			clocks = <&ext>, <&rtc>, <&pclk>;
> +			clock-names = "ext", "rtc", "pclk";
> +
> +			#clock-cells = <1>;
> +		};
> +	};
> +};
> +
> +For information about the top-level "ingenic,tcu" compatible node and other
> +children nodes, see Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..7f3af2da77cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> @@ -0,0 +1,39 @@
> +Ingenic SoCs Timer/Counter Unit Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
> +  * ingenic,jz4740-tcu-intc
> +  * ingenic,jz4770-tcu-intc
> +  * ingenic,jz4780-tcu-intc
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> +  interrupt source. The value shall be 1.
> +- interrupt-parent : phandle of the interrupt controller.
> +- interrupts : Specifies the interrupt the controller is connected to.
> +
> +Example:
> +
> +/ {
> +	tcu: mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x10002000 0x1000>;
> +
> +		tcu_irq: interrupt-controller@20 {
> +			compatible = "ingenic,jz4740-tcu-intc";
> +			reg = <0x20 0x20>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <15>;
> +		};
> +	};
> +};
> +
> +For information about the top-level "ingenic,tcu" compatible node and other
> +children nodes, see Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
> diff --git a/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..5742c3f21550
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
> @@ -0,0 +1,56 @@
> +Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
> +----------------------------------------------------------
> +
> +For a description of the TCU hardware and drivers, have a look at
> +Documentation/mips/ingenic-tcu.txt.
> +
> +The TCU is implemented as a parent node, whose role is to create the
> +regmap, and child nodes for the various drivers listed in the aforementioned
> +document.

You're describing the Linux driver here. Please stick to a description
of the HW.

> +
> +Required properties:
> +
> +- compatible: must be "ingenic,tcu", "simple-mfd", "syscon";

Without any provision for an SoC version? Seems bold...

> +- reg: Should be the offset/length value corresponding to the TCU registers
> +- #address-cells: Should be <1>;
> +- #size-cells: Should be <1>;
> +- ranges: Should be one range for the full TCU registers area
> +
> +Accepted children nodes:
> +- Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> +- Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
> +- Documentation/devicetree/bindings/timer/ingenic,tcu.txt

It is slightly confusing that you have 3 files named ingenic,tcu.txt.
How about ingenic,tcu-intc.txt and ingenic,tcu-timer.txt (amending the
binding for the timer)?

> +
> +
> +Example:
> +
> +/ {
> +	tcu: mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x10002000 0x1000>;
> +
> +		tcu_irq: interrupt-controller@20 {
> +			compatible = "ingenic,jz4740-tcu-intc";
> +			reg = <0x20 0x20>;
> +			...
> +		};
> +
> +		tcu_clk: clocks@10 {
> +			compatible = "ingenic,jz4740-tcu-clocks";
> +			reg = <0x10 0xff0>;
> +			...
> +		};
> +
> +		tcu_timer: timer@10 {
> +			compatible = "ingenic,jz4740-tcu";
> +			reg = <0x10 0xff0>;
> +			...
> +		};
> +	};
> +};
> +
> +For more information about the children node, refer to the documents listed
> +above in the "Accepted children nodes" section.
> diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..f910b7e96783
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> @@ -0,0 +1,41 @@
> +Ingenic JZ47xx SoCs Timer/Counter Unit driver
> +---------------------------------------------
> +
> +Required properties:
> +
> +- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
> +  * ingenic,jz4740-tcu
> +  * ingenic,jz4770-tcu
> +  * ingenic,jz4780-tcu
> +- interrupt-parent : phandle of the TCU interrupt controller.
> +- interrupts : Specifies the interrupts the controller is connected to.
> +- clocks : List of phandle & clock specifiers for the TCU clocks.
> +- clock-names : List of name strings for the TCU clocks.
> +
> +Example:
> +
> +/ {
> +	tcu: mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x10002000 0x1000>;
> +
> +		tcu_timer: timer@10 {
> +			compatible = "ingenic,jz4740-tcu";
> +			reg = <0x10 0xff0>;
> +
> +			clocks = <&tcu_clk 0>, <&tcu_clk 1>, <&tcu_clk 2>, <&tcu_clk 3>,
> +					 <&tcu_clk 4>, <&tcu_clk 5>, <&tcu_clk 6>, <&tcu_clk 7>;
> +			clock-names = "timer0", "timer1", "timer2", "timer3",
> +						  "timer4", "timer5", "timer6", "timer7";
> +
> +			interrupt-parent = <&tcu_irq>;
> +			interrupts = <0 1 2 3 4 5 6 7>;
> +		};
> +	};
> +};
> +
> +For information about the top-level "ingenic,tcu" compatible node and other
> +children nodes, see Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
> 

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver
  2018-03-17 23:29             ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver Paul Cercueil
@ 2018-03-24  6:26               ` Daniel Lezcano
  2018-03-28 15:15                 ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver, Paul Cercueil
  0 siblings, 1 reply; 80+ messages in thread
From: Daniel Lezcano @ 2018-03-24  6:26 UTC (permalink / raw)
  To: Paul Cercueil, Thomas Gleixner, Jason Cooper, Marc Zyngier,
	Lee Jones, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland
  Cc: James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

On 18/03/2018 00:29, Paul Cercueil wrote:
> This driver will use the TCU (Timer Counter Unit) present on the Ingenic
> JZ47xx SoCs to provide the kernel with a clocksource and timers.

Please provide a more detailed description about the timer.

Where is the clocksource ?

I don't see the point of using channel idx and pwm checking here.

There is one clockevent, why create multiple channels ? Can't you stick
to the usual init routine for a timer.

> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  drivers/clocksource/Kconfig         |   8 ++
>  drivers/clocksource/Makefile        |   1 +
>  drivers/clocksource/timer-ingenic.c | 278 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 287 insertions(+)
>  create mode 100644 drivers/clocksource/timer-ingenic.c
> 
>  v2: Use SPDX identifier for the license
>  v3: - Move documentation to its own patch
>      - Search the devicetree for PWM clients, and use all the TCU
> 	   channels that won't be used for PWM
>  v4: - Add documentation about why we search for PWM clients
>      - Verify that the PWM clients are for the TCU PWM driver
> 
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index d2e5382821a4..481422145fb4 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -592,4 +592,12 @@ config CLKSRC_ST_LPC
>  	  Enable this option to use the Low Power controller timer
>  	  as clocksource.
>  
> +config INGENIC_TIMER
> +	bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
> +	depends on MACH_INGENIC || COMPILE_TEST

bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" if COMPILE_TEST

Remove the depends MACH_INGENIC.

> +	select CLKSRC_OF
> +	default y

No default, Kconfig platform selects the timer.

> +	help
> +	  Support for the timer/counter unit of the Ingenic JZ SoCs.
> +
>  endmenu
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index d6dec4489d66..98691e8999fe 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -74,5 +74,6 @@ obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
>  obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
>  obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
>  obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
> +obj-$(CONFIG_INGENIC_TIMER)		+= timer-ingenic.o
>  obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
>  obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
> diff --git a/drivers/clocksource/timer-ingenic.c b/drivers/clocksource/timer-ingenic.c
> new file mode 100644
> index 000000000000..8c777c0c0023
> --- /dev/null
> +++ b/drivers/clocksource/timer-ingenic.c
> @@ -0,0 +1,278 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Ingenic JZ47xx SoC TCU clocksource driver
> + * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/clockchips.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/mfd/syscon/ingenic-tcu.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#define NUM_CHANNELS	8
> +
> +struct ingenic_tcu;
> +
> +struct ingenic_tcu_channel {
> +	unsigned int idx;
> +	struct clk *clk;
> +};
> +
> +struct ingenic_tcu {
> +	struct ingenic_tcu_channel channels[NUM_CHANNELS];
> +	unsigned long requested;
> +	struct regmap *map;
> +};
> +
> +struct ingenic_clock_event_device {
> +	struct clock_event_device cevt;
> +	struct ingenic_tcu_channel *channel;
> +	char name[32];
> +};
> +
> +#define ingenic_cevt(_evt) \
> +	container_of(_evt, struct ingenic_clock_event_device, cevt)
> +
> +static inline struct ingenic_tcu *to_ingenic_tcu(struct ingenic_tcu_channel *ch)
> +{
> +	return container_of(ch, struct ingenic_tcu, channels[ch->idx]);
> +}
> +
> +static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
> +{
> +	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
> +	struct ingenic_tcu_channel *channel = jzcevt->channel;
> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
> +	unsigned int idx = channel->idx;
> +
> +	regmap_write(tcu->map, TCU_REG_TECR, BIT(idx));
> +	return 0;
> +}
> +
> +static int ingenic_tcu_cevt_set_next(unsigned long next,
> +		struct clock_event_device *evt)
> +{
> +	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
> +	struct ingenic_tcu_channel *channel = jzcevt->channel;
> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
> +	unsigned int idx = channel->idx;
> +
> +	if (next > 0xffff)
> +		return -EINVAL;
> +
> +	regmap_write(tcu->map, TCU_REG_TDFRc(idx), (unsigned int) next);
> +	regmap_write(tcu->map, TCU_REG_TCNTc(idx), 0);
> +	regmap_write(tcu->map, TCU_REG_TESR, BIT(idx));
> +
> +	return 0;
> +}
> +
> +static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
> +{
> +	struct clock_event_device *cevt = dev_id;
> +	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(cevt);
> +	struct ingenic_tcu_channel *channel = jzcevt->channel;
> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
> +	unsigned int idx = channel->idx;
> +
> +	regmap_write(tcu->map, TCU_REG_TECR, BIT(idx));
> +
> +	if (cevt->event_handler)
> +		cevt->event_handler(cevt);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int __init ingenic_tcu_req_channel(struct ingenic_tcu_channel *channel)
> +{
> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
> +	char buf[16];
> +	int err;
> +
> +	if (test_and_set_bit(channel->idx, &tcu->requested))
> +		return -EBUSY;
> +
> +	snprintf(buf, sizeof(buf), "timer%u", channel->idx);
> +	channel->clk = clk_get(NULL, buf);
> +	if (IS_ERR(channel->clk)) {
> +		err = PTR_ERR(channel->clk);
> +		goto out_release;
> +	}
> +
> +	err = clk_prepare_enable(channel->clk);
> +	if (err)
> +		goto out_clk_put;
> +
> +	return 0;
> +
> +out_clk_put:
> +	clk_put(channel->clk);
> +out_release:
> +	clear_bit(channel->idx, &tcu->requested);
> +	return err;
> +}
> +
> +static int __init ingenic_tcu_reset_channel(struct device_node *np,
> +		struct ingenic_tcu_channel *channel)
> +{
> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
> +
> +	return regmap_update_bits(tcu->map, TCU_REG_TCSRc(channel->idx),
> +				0xffff & ~TCU_TCSR_RESERVED_BITS, 0);
> +}
> +
> +static void __init ingenic_tcu_free_channel(struct ingenic_tcu_channel *channel)
> +{
> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
> +
> +	clk_disable_unprepare(channel->clk);
> +	clk_put(channel->clk);
> +	clear_bit(channel->idx, &tcu->requested);
> +}
> +
> +static const char * const ingenic_tcu_timer_names[] = {
> +	"TCU0", "TCU1", "TCU2", "TCU3", "TCU4", "TCU5", "TCU6", "TCU7",
> +};
> +
> +static int __init ingenic_tcu_setup_cevt(struct device_node *np,
> +		struct ingenic_tcu *tcu, unsigned int idx)
> +{
> +	struct ingenic_tcu_channel *channel = &tcu->channels[idx];
> +	struct ingenic_clock_event_device *jzcevt;
> +	unsigned long rate;
> +	int err, virq;
> +
> +	err = ingenic_tcu_req_channel(channel);
> +	if (err)
> +		return err;
> +
> +	err = ingenic_tcu_reset_channel(np, channel);
> +	if (err)
> +		goto err_out_free_channel;
> +
> +	rate = clk_get_rate(channel->clk);
> +	if (!rate) {
> +		err = -EINVAL;
> +		goto err_out_free_channel;
> +	}
> +
> +	jzcevt = kzalloc(sizeof(*jzcevt), GFP_KERNEL);
> +	if (!jzcevt) {
> +		err = -ENOMEM;
> +		goto err_out_free_channel;
> +	}
> +
> +	virq = irq_of_parse_and_map(np, idx);
> +	if (!virq) {
> +		err = -EINVAL;
> +		goto err_out_kfree_jzcevt;
> +	}
> +
> +	err = request_irq(virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
> +			ingenic_tcu_timer_names[idx], &jzcevt->cevt);
> +	if (err)
> +		goto err_out_irq_dispose_mapping;
> +
> +	jzcevt->channel = channel;
> +	snprintf(jzcevt->name, sizeof(jzcevt->name), "ingenic-tcu-chan%u",
> +		 channel->idx);
> +
> +	jzcevt->cevt.cpumask = cpumask_of(smp_processor_id());
> +	jzcevt->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
> +	jzcevt->cevt.name = jzcevt->name;
> +	jzcevt->cevt.rating = 200;
> +	jzcevt->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
> +	jzcevt->cevt.set_next_event = ingenic_tcu_cevt_set_next;
> +
> +	clockevents_config_and_register(&jzcevt->cevt, rate, 10, (1 << 16) - 1);
> +
> +	return 0;
> +
> +err_out_irq_dispose_mapping:
> +	irq_dispose_mapping(virq);
> +err_out_kfree_jzcevt:
> +	kfree(jzcevt);
> +err_out_free_channel:
> +	ingenic_tcu_free_channel(channel);
> +	return err;
> +}
> +
> +static int __init ingenic_tcu_init(struct device_node *np)
> +{
> +	unsigned long available_channels = GENMASK(NUM_CHANNELS - 1, 0);
> +	struct device_node *node, *pwm_driver_node;
> +	struct ingenic_tcu *tcu;
> +	unsigned int i, channel;
> +	int err;
> +	u32 val;
> +
> +	/* Parse the devicetree for clients of the TCU PWM driver;
> +	 * every TCU channel not requested for PWM will be used as
> +	 * a timer.
> +	 */



> +	for_each_node_with_property(node, "pwms") {
> +		/* Get the PWM channel ID (field 1 of the "pwms" node) */
> +		err = of_property_read_u32_index(node, "pwms", 1, &val);
> +		if (!err && val >= NUM_CHANNELS)
> +			err = -EINVAL;
> +		if (err) {
> +			pr_err("timer-ingenic: Unable to parse PWM nodes!");
> +			break;
> +		}
> +
> +		/* Get the PWM driver node (field 0 of the "pwms" node) */
> +		pwm_driver_node = of_parse_phandle(node, "pwms", 0);
> +		if (!pwm_driver_node) {
> +			pr_err("timer-ingenic: Unable to find PWM driver node");
> +			break;
> +		}
> +
> +		/* Verify that the node we found is for the TCU PWM driver,
> +		 * by checking that this driver and the PWM driver passed
> +		 * as phandle share the same parent (the "ingenic,tcu"
> +		 * compatible MFD/syscon node).
> +		 */
> +		if (pwm_driver_node->parent != np->parent)
> +			continue;
> +
> +		pr_info("timer-ingenic: Reserving channel %u for PWM", val);
> +		available_channels &= ~BIT(val);
> +	}
> +
> +	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
> +	if (!tcu)
> +		return -ENOMEM;
> +
> +	tcu->map = syscon_node_to_regmap(np->parent);
> +	if (IS_ERR(tcu->map)) {
> +		err = PTR_ERR(tcu->map);
> +		kfree(tcu);
> +		return err;
> +	}
> +
> +	for (i = 0; i < NUM_CHANNELS; i++)
> +		tcu->channels[i].idx = i;

I'm pretty sure you can do better thaningenic_tcu_setup that :)

> +	for_each_set_bit(channel, &available_channels, NUM_CHANNELS) {
> +		err = _cevt(np, tcu, channel);
> +		if (err) {
> +			pr_warn("timer-ingenic: Unable to init TCU channel %u: %i",
> +					channel, err);
> +			continue;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +/* We only probe via devicetree, no need for a platform driver */
> +CLOCKSOURCE_OF_DECLARE(jz4740_tcu, "ingenic,jz4740-tcu", ingenic_tcu_init);
> +CLOCKSOURCE_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu", ingenic_tcu_init);
> +CLOCKSOURCE_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu", ingenic_tcu_init);

s/CLOCKSOURCE_OF_DECLARE/TIMER_OF_DECLARE/

> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers
  2018-03-17 23:28             ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
  2018-03-20  8:52               ` Marc Zyngier
@ 2018-03-27 14:46               ` Rob Herring
  2018-03-28 15:33                 ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers, Paul Cercueil
  1 sibling, 1 reply; 80+ messages in thread
From: Rob Herring @ 2018-03-27 14:46 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

On Sun, Mar 18, 2018 at 12:28:57AM +0100, Paul Cercueil wrote:
> Add documentation about how to properly use the Ingenic TCU
> (Timer/Counter Unit) drivers from devicetree.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  .../bindings/clock/ingenic,tcu-clocks.txt          | 42 ++++++++++++++++
>  .../bindings/interrupt-controller/ingenic,tcu.txt  | 39 +++++++++++++++
>  .../devicetree/bindings/mfd/ingenic,tcu.txt        | 56 ++++++++++++++++++++++
>  .../devicetree/bindings/timer/ingenic,tcu.txt      | 41 ++++++++++++++++
>  4 files changed, 178 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>  create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> 
>  v4: New patch in this series. Corresponds to V2 patches 3-4-5 with
>  added content.
> 
> diff --git a/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
> new file mode 100644
> index 000000000000..471d27078599
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
> @@ -0,0 +1,42 @@
> +Ingenic SoC TCU binding
> +
> +The TCU is the Timer/Counter Unit present in all Ingenic SoCs. It features 8
> +channels, each one having its own clock, that can be started and stopped,
> +reparented, and reclocked.
> +
> +Required properties:
> +- compatible : One of:
> +  * ingenic,jz4740-tcu-clocks,
> +  * ingenic,jz4770-tcu-clocks,
> +  * ingenic,jz4780-tcu-clocks.
> +- clocks : List of phandle & clock specifiers for clocks external to the TCU.
> +  The "pclk", "rtc" and "ext" clocks should be provided.
> +- clock-names : List of name strings for the external clocks.
> +- #clock-cells: Should be 1.
> +  Clock consumers specify this argument to identify a clock. The valid values
> +  may be found in <dt-bindings/clock/ingenic,tcu.h>.
> +
> +Example:

Let's just put one complete example in instead of all these duplicated 
and incomplete examples.

> +
> +/ {
> +	tcu: mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x10002000 0x1000>;
> +
> +		tcu_clk: clocks@10 {
> +			compatible = "ingenic,jz4740-tcu-clocks";
> +			reg = <0x10 0xff0>;
> +
> +			clocks = <&ext>, <&rtc>, <&pclk>;
> +			clock-names = "ext", "rtc", "pclk";
> +
> +			#clock-cells = <1>;
> +		};
> +	};
> +};
> +
> +For information about the top-level "ingenic,tcu" compatible node and other
> +children nodes, see Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..7f3af2da77cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> @@ -0,0 +1,39 @@
> +Ingenic SoCs Timer/Counter Unit Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
> +  * ingenic,jz4740-tcu-intc
> +  * ingenic,jz4770-tcu-intc
> +  * ingenic,jz4780-tcu-intc
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> +  interrupt source. The value shall be 1.
> +- interrupt-parent : phandle of the interrupt controller.
> +- interrupts : Specifies the interrupt the controller is connected to.
> +
> +Example:
> +
> +/ {
> +	tcu: mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x10002000 0x1000>;
> +
> +		tcu_irq: interrupt-controller@20 {
> +			compatible = "ingenic,jz4740-tcu-intc";
> +			reg = <0x20 0x20>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <15>;

The interrupt controller doesn't require any clocks?

> +		};
> +	};
> +};
> +
> +For information about the top-level "ingenic,tcu" compatible node and other
> +children nodes, see Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
> diff --git a/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..5742c3f21550
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
> @@ -0,0 +1,56 @@
> +Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
> +----------------------------------------------------------
> +
> +For a description of the TCU hardware and drivers, have a look at
> +Documentation/mips/ingenic-tcu.txt.
> +
> +The TCU is implemented as a parent node, whose role is to create the
> +regmap, and child nodes for the various drivers listed in the aforementioned
> +document.
> +
> +Required properties:
> +
> +- compatible: must be "ingenic,tcu", "simple-mfd", "syscon";
> +- reg: Should be the offset/length value corresponding to the TCU registers
> +- #address-cells: Should be <1>;
> +- #size-cells: Should be <1>;
> +- ranges: Should be one range for the full TCU registers area
> +
> +Accepted children nodes:
> +- Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
> +- Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
> +- Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> +
> +
> +Example:
> +
> +/ {
> +	tcu: mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x10002000 0x1000>;
> +
> +		tcu_irq: interrupt-controller@20 {
> +			compatible = "ingenic,jz4740-tcu-intc";
> +			reg = <0x20 0x20>;

I think you should drop this node and make the parent node the interrupt 
controller. That is the normal pattern where the parent node handles 
all the common functions. Otherwise, there is no need to have the parent 
node. You should then also drop simple-mfd as then you can control 
initialization order by initializing interrupt controller before 
its clients.

> +			...
> +		};
> +
> +		tcu_clk: clocks@10 {
> +			compatible = "ingenic,jz4740-tcu-clocks";
> +			reg = <0x10 0xff0>;
> +			...
> +		};
> +
> +		tcu_timer: timer@10 {
> +			compatible = "ingenic,jz4740-tcu";
> +			reg = <0x10 0xff0>;

Is this copy-n-paste or you really have 2 nodes at the same address? The 
latter is not valid.

> +			...
> +		};
> +	};
> +};
> +
> +For more information about the children node, refer to the documents listed
> +above in the "Accepted children nodes" section.
> diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> new file mode 100644
> index 000000000000..f910b7e96783
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> @@ -0,0 +1,41 @@
> +Ingenic JZ47xx SoCs Timer/Counter Unit driver
> +---------------------------------------------
> +
> +Required properties:
> +
> +- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
> +  * ingenic,jz4740-tcu
> +  * ingenic,jz4770-tcu
> +  * ingenic,jz4780-tcu
> +- interrupt-parent : phandle of the TCU interrupt controller.
> +- interrupts : Specifies the interrupts the controller is connected to.
> +- clocks : List of phandle & clock specifiers for the TCU clocks.
> +- clock-names : List of name strings for the TCU clocks.
> +
> +Example:
> +
> +/ {
> +	tcu: mfd@10002000 {
> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
> +		reg = <0x10002000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x10002000 0x1000>;
> +
> +		tcu_timer: timer@10 {
> +			compatible = "ingenic,jz4740-tcu";
> +			reg = <0x10 0xff0>;
> +
> +			clocks = <&tcu_clk 0>, <&tcu_clk 1>, <&tcu_clk 2>, <&tcu_clk 3>,
> +					 <&tcu_clk 4>, <&tcu_clk 5>, <&tcu_clk 6>, <&tcu_clk 7>;
> +			clock-names = "timer0", "timer1", "timer2", "timer3",
> +						  "timer4", "timer5", "timer6", "timer7";
> +
> +			interrupt-parent = <&tcu_irq>;
> +			interrupts = <0 1 2 3 4 5 6 7>;

Thinking about this some more... You simply have 8 timers (and no other 
functions?) with some internal clock and irq controls for each timer. I 
don't think it really makes sense to create separate clock and irq 
drivers in that case. That would be like creating clock drivers for 
every clock divider in timers, pwms, uarts, etc. Unless the clocks get 
exposed to other parts of the system, then there is no point.

> +		};
> +	};
> +};
> +
> +For information about the top-level "ingenic,tcu" compatible node and other
> +children nodes, see Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
> -- 
> 2.11.0
> 

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 3/8] doc: Add doc for the Ingenic TCU hardware, 
  2018-03-17 23:52               ` Randy Dunlap
@ 2018-03-28 14:59                 ` Paul Cercueil
  0 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-03-28 14:59 UTC (permalink / raw)
  To: Randy Dunlap
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland, James Hogan, Maarten ter Huurne, linux-clk,
	devicetree, linux-kernel, linux-mips, linux-doc

Le 2018-03-18 00:52, Randy Dunlap a écrit :
> On 03/17/2018 04:28 PM, Paul Cercueil wrote:
>> Add a documentation file about the Timer/Counter Unit (TCU)
>> present in the Ingenic JZ47xx SoCs.
>> 
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>>  Documentation/mips/00-INDEX        |  3 +++
>>  Documentation/mips/ingenic-tcu.txt | 50 
>> ++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 53 insertions(+)
>>  create mode 100644 Documentation/mips/ingenic-tcu.txt
>> 
>>  v4: New patch in this series
> 
>> diff --git a/Documentation/mips/ingenic-tcu.txt 
>> b/Documentation/mips/ingenic-tcu.txt
>> new file mode 100644
>> index 000000000000..2508e5793da8
>> --- /dev/null
>> +++ b/Documentation/mips/ingenic-tcu.txt
>> @@ -0,0 +1,50 @@
>> +Ingenic JZ47xx SoCs Timer/Counter Unit hardware
>> +-----------------------------------------------
>> +
>> +The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a 
>> multi-function
>> +hardware block. It features eight channels, that can be used as 
>> counters,
> 
>                     drop comma ............. ^

Ok.

>> +timers, or PWM.
>> +
>> +- JZ4770 introduced a separate channel, called Operating System Timer 
>> (OST).
>> +  It is a 64-bit programmable timer.
>> +
>> +- Each one of the eight channels has its own clock, which can be 
>> reparented
>> +  to three different clocks (pclk, ext, rtc), gated, and reclocked, 
>> through
>> +  their TCSR register.
>> +  * The watchdog and OST hardware blocks also feature a TCSR register 
>> with
>> +	the same format in their register space.
>> +  * The TCU registers used to gate/ungate can also gate/ungate the 
>> watchdog
>> +	and OST clocks.
>> +
>> +- On SoCs >= JZ4770, there are two different modes:
>> +  * Channels 0, 3-7 operate in TCU1 mode: they cannot work in sleep 
>> mode,
>> +	but are easier to operate.
>> +  * Channels 1-2 operate in TCU2 mode: they can work in sleep mode, 
>> but
>> +	the operation is a bit more complicated than with TCU1 channels.
>> +
>> +- Each channel can generate an interrupt. Some channels share an 
>> interrupt
>> +  line, some don't, and this changes between SoC versions:
>> +  * on JZ4740, timer 0 and timer 1 have their own interrupt line; 
>> others share
>> +	one interrupt line.
>> +  * on JZ4770 and JZ4780, timer 5 has its own interrupt; timers 0-4 
>> and 6-7 all
>> +	use one interrupt line; the OST uses the last interrupt.
> 
> "The OST uses the last interrupt." is not clear to someone who doesn't 
> know
> about this hardware. (I can read it several ways.)
> 
> Does it mean that the 4770 and 4780 have 3 interrupt lines used like 
> so?
> 
> - timer 5 uses one interrupt line
> - timers 0-4 and 6-7 use a second interrupt line
> - the OST uses a third interrupt line

Correct. I'll make it more obvious.

Thanks,
-Paul

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers, 
  2018-03-18 22:13             ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Daniel Lezcano
@ 2018-03-28 15:01               ` Paul Cercueil
  2018-03-28 15:10                 ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Daniel Lezcano
  0 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-03-28 15:01 UTC (permalink / raw)
  To: Daniel Lezcano
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Ralf Baechle, Rob Herring, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

Le 2018-03-18 23:13, Daniel Lezcano a écrit :
> On 18/03/2018 00:28, Paul Cercueil wrote:
>> Hi,
>> 
>> This is the 4th version of my TCU patchset.
>> 
>> The major change is a greatly improved documentation, both in-code
>> and as separate text files, to describe how the hardware works and
>> how the devicetree bindings should be used.
>> 
>> There are also cosmetic changes in the irqchip driver, and the
>> clocksource driver will now use as timers all TCU channels not
>> requested by the TCU PWM driver.
> 
> Hi Paul,
> 
> I don't know why but you series appears in reply to [PATCH v3 2/9]. Not
> sure if it is my mailer or how you are sending the patches but if it is
> the latter can you in the future, when resending a new version, not use
> the in-reply-to option. It will be easier to follow the versions.
> 
> Thanks.
> 
>  -- Daniel

Hi Daniel,

I guess I did a mistake. I always reply to the first patch of the 
previous
version of the patchset (is that correct?).

Thanks,
-Paul

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU  clocks, 
  2018-03-20  7:15               ` Mathieu Malaterre
@ 2018-03-28 15:04                 ` Paul Cercueil
  2018-03-28 18:35                   ` [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks Mathieu Malaterre
  0 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-03-28 15:04 UTC (permalink / raw)
  To: Mathieu Malaterre
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland, James Hogan, Maarten ter Huurne, linux-clk,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML,
	Linux-MIPS, linux-doc, mathieu.malaterre

Le 2018-03-20 08:15, Mathieu Malaterre a écrit :
> Hi Paul,
> 
> Two things:
> 
> On Sun, Mar 18, 2018 at 12:28 AM, Paul Cercueil <paul@crapouillou.net> 
> wrote:
>> This header provides clock numbers for the ingenic,tcu
>> DT binding.
> 
> I have tested the whole series on my Creator CI20 with success, using:
> 
> + tcu@10002000 {
> + compatible = "ingenic,jz4780-tcu";
> + reg = <0x10002000 0x140>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <27 26 25>;
> + };
> 
> 
> So:
> 
> Tested-by: Mathieu Malaterre <malat@debian.org>

Great! Is that for the whole patchset or just this one patch?

>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> ---
>>  include/dt-bindings/clock/ingenic,tcu.h | 23 +++++++++++++++++++++++
>>  1 file changed, 23 insertions(+)
>>  create mode 100644 include/dt-bindings/clock/ingenic,tcu.h
>> 
>>  v2: Use SPDX identifier for the license
>>  v3: No change
>>  v4: No change
>> 
>> diff --git a/include/dt-bindings/clock/ingenic,tcu.h 
>> b/include/dt-bindings/clock/ingenic,tcu.h
>> new file mode 100644
>> index 000000000000..179815d7b3bb
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/ingenic,tcu.h
>> @@ -0,0 +1,23 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * This header provides clock numbers for the ingenic,tcu DT binding.
>> + */
>> +
>> +#ifndef __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
>> +#define __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
>> +
>> +#define JZ4740_CLK_TIMER0      0
>> +#define JZ4740_CLK_TIMER1      1
>> +#define JZ4740_CLK_TIMER2      2
>> +#define JZ4740_CLK_TIMER3      3
>> +#define JZ4740_CLK_TIMER4      4
>> +#define JZ4740_CLK_TIMER5      5
>> +#define JZ4740_CLK_TIMER6      6
>> +#define JZ4740_CLK_TIMER7      7
>> +#define JZ4740_CLK_WDT         8
>> +#define JZ4740_CLK_LAST                JZ4740_CLK_WDT
>> +
>> +#define JZ4770_CLK_OST         9
>> +#define JZ4770_CLK_LAST                JZ4770_CLK_OST
>> +
> 
> When working on JZ4780 support, I always struggle to read those kind
> of #define. Since this is a new patch would you mind changing
> s/JZ4740/JZ47XX/ in your header ?

Well the idea was that these defines are for JZ4740 and newer.
But that means all Ingenic SoCs, so I guess I can change it.

> Thanks for your work on JZ !

Sure, thank you for testing!

>> +#endif /* __DT_BINDINGS_CLOCK_INGENIC_TCU_H__ */
>> --
>> 2.11.0
>> 
>> 

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers, 
  2018-03-20  8:52               ` Marc Zyngier
@ 2018-03-28 15:09                 ` Paul Cercueil
  0 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-03-28 15:09 UTC (permalink / raw)
  To: Marc Zyngier
  Cc: Thomas Gleixner, Jason Cooper, Lee Jones, Daniel Lezcano,
	Ralf Baechle, Rob Herring, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

Le 2018-03-20 09:52, Marc Zyngier a écrit :
> On 17/03/18 23:28, Paul Cercueil wrote:
>> Add documentation about how to properly use the Ingenic TCU
>> (Timer/Counter Unit) drivers from devicetree.
>> 
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>>  .../bindings/clock/ingenic,tcu-clocks.txt          | 42 
>> ++++++++++++++++
>>  .../bindings/interrupt-controller/ingenic,tcu.txt  | 39 
>> +++++++++++++++
>>  .../devicetree/bindings/mfd/ingenic,tcu.txt        | 56 
>> ++++++++++++++++++++++
>>  .../devicetree/bindings/timer/ingenic,tcu.txt      | 41 
>> ++++++++++++++++
>>  4 files changed, 178 insertions(+)
>>  create mode 100644 
>> Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>>  create mode 100644 
>> Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>>  create mode 100644 
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>>  create mode 100644 
>> Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> 
>>  v4: New patch in this series. Corresponds to V2 patches 3-4-5 with
>>  added content.
>> 
>> diff --git 
>> a/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt 
>> b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> new file mode 100644
>> index 000000000000..471d27078599
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> @@ -0,0 +1,42 @@
>> +Ingenic SoC TCU binding
>> +
>> +The TCU is the Timer/Counter Unit present in all Ingenic SoCs. It 
>> features 8
>> +channels, each one having its own clock, that can be started and 
>> stopped,
>> +reparented, and reclocked.
>> +
>> +Required properties:
>> +- compatible : One of:
>> +  * ingenic,jz4740-tcu-clocks,
>> +  * ingenic,jz4770-tcu-clocks,
>> +  * ingenic,jz4780-tcu-clocks.
>> +- clocks : List of phandle & clock specifiers for clocks external to 
>> the TCU.
>> +  The "pclk", "rtc" and "ext" clocks should be provided.
>> +- clock-names : List of name strings for the external clocks.
>> +- #clock-cells: Should be 1.
>> +  Clock consumers specify this argument to identify a clock. The 
>> valid values
>> +  may be found in <dt-bindings/clock/ingenic,tcu.h>.
>> +
>> +Example:
>> +
>> +/ {
>> +	tcu: mfd@10002000 {
>> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> +		reg = <0x10002000 0x1000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x10002000 0x1000>;
>> +
>> +		tcu_clk: clocks@10 {
>> +			compatible = "ingenic,jz4740-tcu-clocks";
>> +			reg = <0x10 0xff0>;
>> +
>> +			clocks = <&ext>, <&rtc>, <&pclk>;
>> +			clock-names = "ext", "rtc", "pclk";
>> +
>> +			#clock-cells = <1>;
>> +		};
>> +	};
>> +};
>> +
>> +For information about the top-level "ingenic,tcu" compatible node and 
>> other
>> +children nodes, see 
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
>> diff --git 
>> a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt 
>> b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> new file mode 100644
>> index 000000000000..7f3af2da77cd
>> --- /dev/null
>> +++ 
>> b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> @@ -0,0 +1,39 @@
>> +Ingenic SoCs Timer/Counter Unit Interrupt Controller
>> +
>> +Required properties:
>> +
>> +- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings 
>> are:
>> +  * ingenic,jz4740-tcu-intc
>> +  * ingenic,jz4770-tcu-intc
>> +  * ingenic,jz4780-tcu-intc
>> +- interrupt-controller : Identifies the node as an interrupt 
>> controller
>> +- #interrupt-cells : Specifies the number of cells needed to encode 
>> an
>> +  interrupt source. The value shall be 1.
>> +- interrupt-parent : phandle of the interrupt controller.
>> +- interrupts : Specifies the interrupt the controller is connected 
>> to.
>> +
>> +Example:
>> +
>> +/ {
>> +	tcu: mfd@10002000 {
>> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> +		reg = <0x10002000 0x1000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x10002000 0x1000>;
>> +
>> +		tcu_irq: interrupt-controller@20 {
>> +			compatible = "ingenic,jz4740-tcu-intc";
>> +			reg = <0x20 0x20>;
>> +
>> +			interrupt-controller;
>> +			#interrupt-cells = <1>;
>> +
>> +			interrupt-parent = <&intc>;
>> +			interrupts = <15>;
>> +		};
>> +	};
>> +};
>> +
>> +For information about the top-level "ingenic,tcu" compatible node and 
>> other
>> +children nodes, see 
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
>> diff --git a/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt 
>> b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>> new file mode 100644
>> index 000000000000..5742c3f21550
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>> @@ -0,0 +1,56 @@
>> +Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
>> +----------------------------------------------------------
>> +
>> +For a description of the TCU hardware and drivers, have a look at
>> +Documentation/mips/ingenic-tcu.txt.
>> +
>> +The TCU is implemented as a parent node, whose role is to create the
>> +regmap, and child nodes for the various drivers listed in the 
>> aforementioned
>> +document.
> 
> You're describing the Linux driver here. Please stick to a description
> of the HW.

There's already a whole file that describes the hardware. I just wanted 
to mention
that there should be child nodes, but I can rephrase that.

>> +
>> +Required properties:
>> +
>> +- compatible: must be "ingenic,tcu", "simple-mfd", "syscon";
> 
> Without any provision for an SoC version? Seems bold...

Well, we don't use the "ingenic,tcu" compatible string, the parent node 
is just
here to create the regmap (in this version of the patchset, it will 
probably change
later).

>> +- reg: Should be the offset/length value corresponding to the TCU 
>> registers
>> +- #address-cells: Should be <1>;
>> +- #size-cells: Should be <1>;
>> +- ranges: Should be one range for the full TCU registers area
>> +
>> +Accepted children nodes:
>> +- 
>> Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> +- Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> +- Documentation/devicetree/bindings/timer/ingenic,tcu.txt
> 
> It is slightly confusing that you have 3 files named ingenic,tcu.txt.
> How about ingenic,tcu-intc.txt and ingenic,tcu-timer.txt (amending the
> binding for the timer)?

Right. I'll change that.

>> +
>> +
>> +Example:
>> +
>> +/ {
>> +	tcu: mfd@10002000 {
>> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> +		reg = <0x10002000 0x1000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x10002000 0x1000>;
>> +
>> +		tcu_irq: interrupt-controller@20 {
>> +			compatible = "ingenic,jz4740-tcu-intc";
>> +			reg = <0x20 0x20>;
>> +			...
>> +		};
>> +
>> +		tcu_clk: clocks@10 {
>> +			compatible = "ingenic,jz4740-tcu-clocks";
>> +			reg = <0x10 0xff0>;
>> +			...
>> +		};
>> +
>> +		tcu_timer: timer@10 {
>> +			compatible = "ingenic,jz4740-tcu";
>> +			reg = <0x10 0xff0>;
>> +			...
>> +		};
>> +	};
>> +};
>> +
>> +For more information about the children node, refer to the documents 
>> listed
>> +above in the "Accepted children nodes" section.
>> diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt 
>> b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> new file mode 100644
>> index 000000000000..f910b7e96783
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> @@ -0,0 +1,41 @@
>> +Ingenic JZ47xx SoCs Timer/Counter Unit driver
>> +---------------------------------------------
>> +
>> +Required properties:
>> +
>> +- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
>> +  * ingenic,jz4740-tcu
>> +  * ingenic,jz4770-tcu
>> +  * ingenic,jz4780-tcu
>> +- interrupt-parent : phandle of the TCU interrupt controller.
>> +- interrupts : Specifies the interrupts the controller is connected 
>> to.
>> +- clocks : List of phandle & clock specifiers for the TCU clocks.
>> +- clock-names : List of name strings for the TCU clocks.
>> +
>> +Example:
>> +
>> +/ {
>> +	tcu: mfd@10002000 {
>> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> +		reg = <0x10002000 0x1000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x10002000 0x1000>;
>> +
>> +		tcu_timer: timer@10 {
>> +			compatible = "ingenic,jz4740-tcu";
>> +			reg = <0x10 0xff0>;
>> +
>> +			clocks = <&tcu_clk 0>, <&tcu_clk 1>, <&tcu_clk 2>, <&tcu_clk 3>,
>> +					 <&tcu_clk 4>, <&tcu_clk 5>, <&tcu_clk 6>, <&tcu_clk 7>;
>> +			clock-names = "timer0", "timer1", "timer2", "timer3",
>> +						  "timer4", "timer5", "timer6", "timer7";
>> +
>> +			interrupt-parent = <&tcu_irq>;
>> +			interrupts = <0 1 2 3 4 5 6 7>;
>> +		};
>> +	};
>> +};
>> +
>> +For information about the top-level "ingenic,tcu" compatible node and 
>> other
>> +children nodes, see 
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
>> 
> 
> Thanks,
> 
> 	M.

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers
  2018-03-28 15:01               ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers, Paul Cercueil
@ 2018-03-28 15:10                 ` Daniel Lezcano
  0 siblings, 0 replies; 80+ messages in thread
From: Daniel Lezcano @ 2018-03-28 15:10 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Ralf Baechle, Rob Herring, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

On 28/03/2018 17:01, Paul Cercueil wrote:
> Le 2018-03-18 23:13, Daniel Lezcano a écrit :
>> On 18/03/2018 00:28, Paul Cercueil wrote:
>>> Hi,
>>>
>>> This is the 4th version of my TCU patchset.
>>>
>>> The major change is a greatly improved documentation, both in-code
>>> and as separate text files, to describe how the hardware works and
>>> how the devicetree bindings should be used.
>>>
>>> There are also cosmetic changes in the irqchip driver, and the
>>> clocksource driver will now use as timers all TCU channels not
>>> requested by the TCU PWM driver.
>>
>> Hi Paul,
>>
>> I don't know why but you series appears in reply to [PATCH v3 2/9]. Not
>> sure if it is my mailer or how you are sending the patches but if it is
>> the latter can you in the future, when resending a new version, not use
>> the in-reply-to option. It will be easier to follow the versions.
>>
>> Thanks.
>>
>>  -- Daniel
> 
> Hi Daniel,
> 
> I guess I did a mistake. I always reply to the first patch of the previous
> version of the patchset (is that correct?).

It depends, if you have a threaded view of emails, it is not easy to
review the patches when they are in several levels. Usually you can see
the patches is top posted without in-reply-to every version.

You can use in-reply-to to an email suggesting a change in order to give
context.

For the v4 series of these drivers, I'm lost :/


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver, 
  2018-03-24  6:26               ` Daniel Lezcano
@ 2018-03-28 15:15                 ` Paul Cercueil
  2018-03-28 16:25                   ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver Daniel Lezcano
  0 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-03-28 15:15 UTC (permalink / raw)
  To: Daniel Lezcano
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Ralf Baechle, Rob Herring, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

Le 2018-03-24 07:26, Daniel Lezcano a écrit :
> On 18/03/2018 00:29, Paul Cercueil wrote:
>> This driver will use the TCU (Timer Counter Unit) present on the 
>> Ingenic
>> JZ47xx SoCs to provide the kernel with a clocksource and timers.
> 
> Please provide a more detailed description about the timer.

There's a doc file for that :)

> Where is the clocksource ?

Right, there is no clocksource, just timers.

> I don't see the point of using channel idx and pwm checking here.
> 
> There is one clockevent, why create multiple channels ? Can't you stick
> to the usual init routine for a timer.

So the idea is that we use all the TCU channels that won't be used for 
PWM
as timers. Hence the PWM checking. Why is this bad?

>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>>  drivers/clocksource/Kconfig         |   8 ++
>>  drivers/clocksource/Makefile        |   1 +
>>  drivers/clocksource/timer-ingenic.c | 278 
>> ++++++++++++++++++++++++++++++++++++
>>  3 files changed, 287 insertions(+)
>>  create mode 100644 drivers/clocksource/timer-ingenic.c
>> 
>>  v2: Use SPDX identifier for the license
>>  v3: - Move documentation to its own patch
>>      - Search the devicetree for PWM clients, and use all the TCU
>> 	   channels that won't be used for PWM
>>  v4: - Add documentation about why we search for PWM clients
>>      - Verify that the PWM clients are for the TCU PWM driver
>> 
>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>> index d2e5382821a4..481422145fb4 100644
>> --- a/drivers/clocksource/Kconfig
>> +++ b/drivers/clocksource/Kconfig
>> @@ -592,4 +592,12 @@ config CLKSRC_ST_LPC
>>  	  Enable this option to use the Low Power controller timer
>>  	  as clocksource.
>> 
>> +config INGENIC_TIMER
>> +	bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
>> +	depends on MACH_INGENIC || COMPILE_TEST
> 
> bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" if 
> COMPILE_TEST
> 
> Remove the depends MACH_INGENIC.

This driver is not useful on anything else than Ingenic SoCs, why should 
I
remove MACH_INGENIC then?

>> +	select CLKSRC_OF
>> +	default y
> 
> No default, Kconfig platform selects the timer.

Alright.

>> +	help
>> +	  Support for the timer/counter unit of the Ingenic JZ SoCs.
>> +
>>  endmenu
>> diff --git a/drivers/clocksource/Makefile 
>> b/drivers/clocksource/Makefile
>> index d6dec4489d66..98691e8999fe 100644
>> --- a/drivers/clocksource/Makefile
>> +++ b/drivers/clocksource/Makefile
>> @@ -74,5 +74,6 @@ obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
>>  obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
>>  obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
>>  obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
>> +obj-$(CONFIG_INGENIC_TIMER)		+= timer-ingenic.o
>>  obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
>>  obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
>> diff --git a/drivers/clocksource/timer-ingenic.c 
>> b/drivers/clocksource/timer-ingenic.c
>> new file mode 100644
>> index 000000000000..8c777c0c0023
>> --- /dev/null
>> +++ b/drivers/clocksource/timer-ingenic.c
>> @@ -0,0 +1,278 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Ingenic JZ47xx SoC TCU clocksource driver
>> + * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
>> + */
>> +
>> +#include <linux/bitops.h>
>> +#include <linux/clk.h>
>> +#include <linux/clockchips.h>
>> +#include <linux/err.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/mfd/syscon/ingenic-tcu.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/regmap.h>
>> +#include <linux/slab.h>
>> +
>> +#define NUM_CHANNELS	8
>> +
>> +struct ingenic_tcu;
>> +
>> +struct ingenic_tcu_channel {
>> +	unsigned int idx;
>> +	struct clk *clk;
>> +};
>> +
>> +struct ingenic_tcu {
>> +	struct ingenic_tcu_channel channels[NUM_CHANNELS];
>> +	unsigned long requested;
>> +	struct regmap *map;
>> +};
>> +
>> +struct ingenic_clock_event_device {
>> +	struct clock_event_device cevt;
>> +	struct ingenic_tcu_channel *channel;
>> +	char name[32];
>> +};
>> +
>> +#define ingenic_cevt(_evt) \
>> +	container_of(_evt, struct ingenic_clock_event_device, cevt)
>> +
>> +static inline struct ingenic_tcu *to_ingenic_tcu(struct 
>> ingenic_tcu_channel *ch)
>> +{
>> +	return container_of(ch, struct ingenic_tcu, channels[ch->idx]);
>> +}
>> +
>> +static int ingenic_tcu_cevt_set_state_shutdown(struct 
>> clock_event_device *evt)
>> +{
>> +	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
>> +	struct ingenic_tcu_channel *channel = jzcevt->channel;
>> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
>> +	unsigned int idx = channel->idx;
>> +
>> +	regmap_write(tcu->map, TCU_REG_TECR, BIT(idx));
>> +	return 0;
>> +}
>> +
>> +static int ingenic_tcu_cevt_set_next(unsigned long next,
>> +		struct clock_event_device *evt)
>> +{
>> +	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
>> +	struct ingenic_tcu_channel *channel = jzcevt->channel;
>> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
>> +	unsigned int idx = channel->idx;
>> +
>> +	if (next > 0xffff)
>> +		return -EINVAL;
>> +
>> +	regmap_write(tcu->map, TCU_REG_TDFRc(idx), (unsigned int) next);
>> +	regmap_write(tcu->map, TCU_REG_TCNTc(idx), 0);
>> +	regmap_write(tcu->map, TCU_REG_TESR, BIT(idx));
>> +
>> +	return 0;
>> +}
>> +
>> +static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
>> +{
>> +	struct clock_event_device *cevt = dev_id;
>> +	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(cevt);
>> +	struct ingenic_tcu_channel *channel = jzcevt->channel;
>> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
>> +	unsigned int idx = channel->idx;
>> +
>> +	regmap_write(tcu->map, TCU_REG_TECR, BIT(idx));
>> +
>> +	if (cevt->event_handler)
>> +		cevt->event_handler(cevt);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static int __init ingenic_tcu_req_channel(struct ingenic_tcu_channel 
>> *channel)
>> +{
>> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
>> +	char buf[16];
>> +	int err;
>> +
>> +	if (test_and_set_bit(channel->idx, &tcu->requested))
>> +		return -EBUSY;
>> +
>> +	snprintf(buf, sizeof(buf), "timer%u", channel->idx);
>> +	channel->clk = clk_get(NULL, buf);
>> +	if (IS_ERR(channel->clk)) {
>> +		err = PTR_ERR(channel->clk);
>> +		goto out_release;
>> +	}
>> +
>> +	err = clk_prepare_enable(channel->clk);
>> +	if (err)
>> +		goto out_clk_put;
>> +
>> +	return 0;
>> +
>> +out_clk_put:
>> +	clk_put(channel->clk);
>> +out_release:
>> +	clear_bit(channel->idx, &tcu->requested);
>> +	return err;
>> +}
>> +
>> +static int __init ingenic_tcu_reset_channel(struct device_node *np,
>> +		struct ingenic_tcu_channel *channel)
>> +{
>> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
>> +
>> +	return regmap_update_bits(tcu->map, TCU_REG_TCSRc(channel->idx),
>> +				0xffff & ~TCU_TCSR_RESERVED_BITS, 0);
>> +}
>> +
>> +static void __init ingenic_tcu_free_channel(struct 
>> ingenic_tcu_channel *channel)
>> +{
>> +	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
>> +
>> +	clk_disable_unprepare(channel->clk);
>> +	clk_put(channel->clk);
>> +	clear_bit(channel->idx, &tcu->requested);
>> +}
>> +
>> +static const char * const ingenic_tcu_timer_names[] = {
>> +	"TCU0", "TCU1", "TCU2", "TCU3", "TCU4", "TCU5", "TCU6", "TCU7",
>> +};
>> +
>> +static int __init ingenic_tcu_setup_cevt(struct device_node *np,
>> +		struct ingenic_tcu *tcu, unsigned int idx)
>> +{
>> +	struct ingenic_tcu_channel *channel = &tcu->channels[idx];
>> +	struct ingenic_clock_event_device *jzcevt;
>> +	unsigned long rate;
>> +	int err, virq;
>> +
>> +	err = ingenic_tcu_req_channel(channel);
>> +	if (err)
>> +		return err;
>> +
>> +	err = ingenic_tcu_reset_channel(np, channel);
>> +	if (err)
>> +		goto err_out_free_channel;
>> +
>> +	rate = clk_get_rate(channel->clk);
>> +	if (!rate) {
>> +		err = -EINVAL;
>> +		goto err_out_free_channel;
>> +	}
>> +
>> +	jzcevt = kzalloc(sizeof(*jzcevt), GFP_KERNEL);
>> +	if (!jzcevt) {
>> +		err = -ENOMEM;
>> +		goto err_out_free_channel;
>> +	}
>> +
>> +	virq = irq_of_parse_and_map(np, idx);
>> +	if (!virq) {
>> +		err = -EINVAL;
>> +		goto err_out_kfree_jzcevt;
>> +	}
>> +
>> +	err = request_irq(virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
>> +			ingenic_tcu_timer_names[idx], &jzcevt->cevt);
>> +	if (err)
>> +		goto err_out_irq_dispose_mapping;
>> +
>> +	jzcevt->channel = channel;
>> +	snprintf(jzcevt->name, sizeof(jzcevt->name), "ingenic-tcu-chan%u",
>> +		 channel->idx);
>> +
>> +	jzcevt->cevt.cpumask = cpumask_of(smp_processor_id());
>> +	jzcevt->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
>> +	jzcevt->cevt.name = jzcevt->name;
>> +	jzcevt->cevt.rating = 200;
>> +	jzcevt->cevt.set_state_shutdown = 
>> ingenic_tcu_cevt_set_state_shutdown;
>> +	jzcevt->cevt.set_next_event = ingenic_tcu_cevt_set_next;
>> +
>> +	clockevents_config_and_register(&jzcevt->cevt, rate, 10, (1 << 16) - 
>> 1);
>> +
>> +	return 0;
>> +
>> +err_out_irq_dispose_mapping:
>> +	irq_dispose_mapping(virq);
>> +err_out_kfree_jzcevt:
>> +	kfree(jzcevt);
>> +err_out_free_channel:
>> +	ingenic_tcu_free_channel(channel);
>> +	return err;
>> +}
>> +
>> +static int __init ingenic_tcu_init(struct device_node *np)
>> +{
>> +	unsigned long available_channels = GENMASK(NUM_CHANNELS - 1, 0);
>> +	struct device_node *node, *pwm_driver_node;
>> +	struct ingenic_tcu *tcu;
>> +	unsigned int i, channel;
>> +	int err;
>> +	u32 val;
>> +
>> +	/* Parse the devicetree for clients of the TCU PWM driver;
>> +	 * every TCU channel not requested for PWM will be used as
>> +	 * a timer.
>> +	 */
> 
> 
> 
>> +	for_each_node_with_property(node, "pwms") {
>> +		/* Get the PWM channel ID (field 1 of the "pwms" node) */
>> +		err = of_property_read_u32_index(node, "pwms", 1, &val);
>> +		if (!err && val >= NUM_CHANNELS)
>> +			err = -EINVAL;
>> +		if (err) {
>> +			pr_err("timer-ingenic: Unable to parse PWM nodes!");
>> +			break;
>> +		}
>> +
>> +		/* Get the PWM driver node (field 0 of the "pwms" node) */
>> +		pwm_driver_node = of_parse_phandle(node, "pwms", 0);
>> +		if (!pwm_driver_node) {
>> +			pr_err("timer-ingenic: Unable to find PWM driver node");
>> +			break;
>> +		}
>> +
>> +		/* Verify that the node we found is for the TCU PWM driver,
>> +		 * by checking that this driver and the PWM driver passed
>> +		 * as phandle share the same parent (the "ingenic,tcu"
>> +		 * compatible MFD/syscon node).
>> +		 */
>> +		if (pwm_driver_node->parent != np->parent)
>> +			continue;
>> +
>> +		pr_info("timer-ingenic: Reserving channel %u for PWM", val);
>> +		available_channels &= ~BIT(val);
>> +	}
>> +
>> +	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
>> +	if (!tcu)
>> +		return -ENOMEM;
>> +
>> +	tcu->map = syscon_node_to_regmap(np->parent);
>> +	if (IS_ERR(tcu->map)) {
>> +		err = PTR_ERR(tcu->map);
>> +		kfree(tcu);
>> +		return err;
>> +	}
>> +
>> +	for (i = 0; i < NUM_CHANNELS; i++)
>> +		tcu->channels[i].idx = i;
> 
> I'm pretty sure you can do better thaningenic_tcu_setup that :)

I didn't think this would be a problem. I guess I can try.

>> +	for_each_set_bit(channel, &available_channels, NUM_CHANNELS) {
>> +		err = _cevt(np, tcu, channel);
>> +		if (err) {
>> +			pr_warn("timer-ingenic: Unable to init TCU channel %u: %i",
>> +					channel, err);
>> +			continue;
>> +		}
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +/* We only probe via devicetree, no need for a platform driver */
>> +CLOCKSOURCE_OF_DECLARE(jz4740_tcu, "ingenic,jz4740-tcu", 
>> ingenic_tcu_init);
>> +CLOCKSOURCE_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu", 
>> ingenic_tcu_init);
>> +CLOCKSOURCE_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu", 
>> ingenic_tcu_init);
> 
> s/CLOCKSOURCE_OF_DECLARE/TIMER_OF_DECLARE/

Sure, OK.

Thanks!
-Paul

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers, 
  2018-03-27 14:46               ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Rob Herring
@ 2018-03-28 15:33                 ` Paul Cercueil
  2018-03-28 16:28                   ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Rob Herring
  0 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-03-28 15:33 UTC (permalink / raw)
  To: Rob Herring
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

Le 2018-03-27 16:46, Rob Herring a écrit :
> On Sun, Mar 18, 2018 at 12:28:57AM +0100, Paul Cercueil wrote:
>> Add documentation about how to properly use the Ingenic TCU
>> (Timer/Counter Unit) drivers from devicetree.
>> 
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>>  .../bindings/clock/ingenic,tcu-clocks.txt          | 42 
>> ++++++++++++++++
>>  .../bindings/interrupt-controller/ingenic,tcu.txt  | 39 
>> +++++++++++++++
>>  .../devicetree/bindings/mfd/ingenic,tcu.txt        | 56 
>> ++++++++++++++++++++++
>>  .../devicetree/bindings/timer/ingenic,tcu.txt      | 41 
>> ++++++++++++++++
>>  4 files changed, 178 insertions(+)
>>  create mode 100644 
>> Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>>  create mode 100644 
>> Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>>  create mode 100644 
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>>  create mode 100644 
>> Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> 
>>  v4: New patch in this series. Corresponds to V2 patches 3-4-5 with
>>  added content.
>> 
>> diff --git 
>> a/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt 
>> b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> new file mode 100644
>> index 000000000000..471d27078599
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> @@ -0,0 +1,42 @@
>> +Ingenic SoC TCU binding
>> +
>> +The TCU is the Timer/Counter Unit present in all Ingenic SoCs. It 
>> features 8
>> +channels, each one having its own clock, that can be started and 
>> stopped,
>> +reparented, and reclocked.
>> +
>> +Required properties:
>> +- compatible : One of:
>> +  * ingenic,jz4740-tcu-clocks,
>> +  * ingenic,jz4770-tcu-clocks,
>> +  * ingenic,jz4780-tcu-clocks.
>> +- clocks : List of phandle & clock specifiers for clocks external to 
>> the TCU.
>> +  The "pclk", "rtc" and "ext" clocks should be provided.
>> +- clock-names : List of name strings for the external clocks.
>> +- #clock-cells: Should be 1.
>> +  Clock consumers specify this argument to identify a clock. The 
>> valid values
>> +  may be found in <dt-bindings/clock/ingenic,tcu.h>.
>> +
>> +Example:
> 
> Let's just put one complete example in instead of all these duplicated
> and incomplete examples.

Alright.

>> +
>> +/ {
>> +	tcu: mfd@10002000 {
>> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> +		reg = <0x10002000 0x1000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x10002000 0x1000>;
>> +
>> +		tcu_clk: clocks@10 {
>> +			compatible = "ingenic,jz4740-tcu-clocks";
>> +			reg = <0x10 0xff0>;
>> +
>> +			clocks = <&ext>, <&rtc>, <&pclk>;
>> +			clock-names = "ext", "rtc", "pclk";
>> +
>> +			#clock-cells = <1>;
>> +		};
>> +	};
>> +};
>> +
>> +For information about the top-level "ingenic,tcu" compatible node and 
>> other
>> +children nodes, see 
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
>> diff --git 
>> a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt 
>> b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> new file mode 100644
>> index 000000000000..7f3af2da77cd
>> --- /dev/null
>> +++ 
>> b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> @@ -0,0 +1,39 @@
>> +Ingenic SoCs Timer/Counter Unit Interrupt Controller
>> +
>> +Required properties:
>> +
>> +- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings 
>> are:
>> +  * ingenic,jz4740-tcu-intc
>> +  * ingenic,jz4770-tcu-intc
>> +  * ingenic,jz4780-tcu-intc
>> +- interrupt-controller : Identifies the node as an interrupt 
>> controller
>> +- #interrupt-cells : Specifies the number of cells needed to encode 
>> an
>> +  interrupt source. The value shall be 1.
>> +- interrupt-parent : phandle of the interrupt controller.
>> +- interrupts : Specifies the interrupt the controller is connected 
>> to.
>> +
>> +Example:
>> +
>> +/ {
>> +	tcu: mfd@10002000 {
>> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> +		reg = <0x10002000 0x1000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x10002000 0x1000>;
>> +
>> +		tcu_irq: interrupt-controller@20 {
>> +			compatible = "ingenic,jz4740-tcu-intc";
>> +			reg = <0x20 0x20>;
>> +
>> +			interrupt-controller;
>> +			#interrupt-cells = <1>;
>> +
>> +			interrupt-parent = <&intc>;
>> +			interrupts = <15>;
> 
> The interrupt controller doesn't require any clocks?

It doesn't. The TCU registers not related to TCU channels are always 
active.

>> +		};
>> +	};
>> +};
>> +
>> +For information about the top-level "ingenic,tcu" compatible node and 
>> other
>> +children nodes, see 
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
>> diff --git a/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt 
>> b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>> new file mode 100644
>> index 000000000000..5742c3f21550
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>> @@ -0,0 +1,56 @@
>> +Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
>> +----------------------------------------------------------
>> +
>> +For a description of the TCU hardware and drivers, have a look at
>> +Documentation/mips/ingenic-tcu.txt.
>> +
>> +The TCU is implemented as a parent node, whose role is to create the
>> +regmap, and child nodes for the various drivers listed in the 
>> aforementioned
>> +document.
>> +
>> +Required properties:
>> +
>> +- compatible: must be "ingenic,tcu", "simple-mfd", "syscon";
>> +- reg: Should be the offset/length value corresponding to the TCU 
>> registers
>> +- #address-cells: Should be <1>;
>> +- #size-cells: Should be <1>;
>> +- ranges: Should be one range for the full TCU registers area
>> +
>> +Accepted children nodes:
>> +- 
>> Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>> +- Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>> +- Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> +
>> +
>> +Example:
>> +
>> +/ {
>> +	tcu: mfd@10002000 {
>> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> +		reg = <0x10002000 0x1000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x10002000 0x1000>;
>> +
>> +		tcu_irq: interrupt-controller@20 {
>> +			compatible = "ingenic,jz4740-tcu-intc";
>> +			reg = <0x20 0x20>;
> 
> I think you should drop this node and make the parent node the 
> interrupt
> controller. That is the normal pattern where the parent node handles
> all the common functions. Otherwise, there is no need to have the 
> parent
> node. You should then also drop simple-mfd as then you can control
> initialization order by initializing interrupt controller before
> its clients.

Alright, good idea.

>> +			...
>> +		};
>> +
>> +		tcu_clk: clocks@10 {
>> +			compatible = "ingenic,jz4740-tcu-clocks";
>> +			reg = <0x10 0xff0>;
>> +			...
>> +		};
>> +
>> +		tcu_timer: timer@10 {
>> +			compatible = "ingenic,jz4740-tcu";
>> +			reg = <0x10 0xff0>;
> 
> Is this copy-n-paste or you really have 2 nodes at the same address? 
> The
> latter is not valid.

I do have 2 nodes at the same address...

>> +			...
>> +		};
>> +	};
>> +};
>> +
>> +For more information about the children node, refer to the documents 
>> listed
>> +above in the "Accepted children nodes" section.
>> diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt 
>> b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> new file mode 100644
>> index 000000000000..f910b7e96783
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> @@ -0,0 +1,41 @@
>> +Ingenic JZ47xx SoCs Timer/Counter Unit driver
>> +---------------------------------------------
>> +
>> +Required properties:
>> +
>> +- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
>> +  * ingenic,jz4740-tcu
>> +  * ingenic,jz4770-tcu
>> +  * ingenic,jz4780-tcu
>> +- interrupt-parent : phandle of the TCU interrupt controller.
>> +- interrupts : Specifies the interrupts the controller is connected 
>> to.
>> +- clocks : List of phandle & clock specifiers for the TCU clocks.
>> +- clock-names : List of name strings for the TCU clocks.
>> +
>> +Example:
>> +
>> +/ {
>> +	tcu: mfd@10002000 {
>> +		compatible = "ingenic,tcu", "simple-mfd", "syscon";
>> +		reg = <0x10002000 0x1000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x10002000 0x1000>;
>> +
>> +		tcu_timer: timer@10 {
>> +			compatible = "ingenic,jz4740-tcu";
>> +			reg = <0x10 0xff0>;
>> +
>> +			clocks = <&tcu_clk 0>, <&tcu_clk 1>, <&tcu_clk 2>, <&tcu_clk 3>,
>> +					 <&tcu_clk 4>, <&tcu_clk 5>, <&tcu_clk 6>, <&tcu_clk 7>;
>> +			clock-names = "timer0", "timer1", "timer2", "timer3",
>> +						  "timer4", "timer5", "timer6", "timer7";
>> +
>> +			interrupt-parent = <&tcu_irq>;
>> +			interrupts = <0 1 2 3 4 5 6 7>;
> 
> Thinking about this some more... You simply have 8 timers (and no other
> functions?) with some internal clock and irq controls for each timer. I
> don't think it really makes sense to create separate clock and irq
> drivers in that case. That would be like creating clock drivers for
> every clock divider in timers, pwms, uarts, etc. Unless the clocks get
> exposed to other parts of the system, then there is no point.

I have 8 timers with some internal clock and IRQ controls, that can be 
used
as PWM. But the TCU also controls the IRQ of the OS Timer (which is 
separate),
as well as masking of the clocks for the OS timer and the watchdog.

I thought having clean drivers for different frameworks working on the 
same
regmap was cleaner than having one big-ass driver handling everything.

>> +		};
>> +	};
>> +};
>> +
>> +For information about the top-level "ingenic,tcu" compatible node and 
>> other
>> +children nodes, see 
>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
>> --
>> 2.11.0
>> 

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver
  2018-03-28 15:15                 ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver, Paul Cercueil
@ 2018-03-28 16:25                   ` Daniel Lezcano
  2018-03-29 14:52                     ` Paul Cercueil
  0 siblings, 1 reply; 80+ messages in thread
From: Daniel Lezcano @ 2018-03-28 16:25 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Ralf Baechle, Rob Herring, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

On 28/03/2018 17:15, Paul Cercueil wrote:
> Le 2018-03-24 07:26, Daniel Lezcano a écrit :
>> On 18/03/2018 00:29, Paul Cercueil wrote:
>>> This driver will use the TCU (Timer Counter Unit) present on the Ingenic
>>> JZ47xx SoCs to provide the kernel with a clocksource and timers.
>>
>> Please provide a more detailed description about the timer.
> 
> There's a doc file for that :)

Usually, when there is a new driver I ask for a description in the
changelog for reference.

>> Where is the clocksource ?
> 
> Right, there is no clocksource, just timers.
> 
>> I don't see the point of using channel idx and pwm checking here.
>>
>> There is one clockevent, why create multiple channels ? Can't you stick
>> to the usual init routine for a timer.
> 
> So the idea is that we use all the TCU channels that won't be used for PWM
> as timers. Hence the PWM checking. Why is this bad?

It is not bad but arguable. By checking the channels used by the pwm in
the code, you introduce an adherence between two subsystems even if it
is just related to the DT parsing part.

As it is not needed to have more than one timer in the time framework
(at least with the same characteristics), the pwm channels check is
pointless. We can assume the author of the DT file is smart enough to
prevent conflicts and define a pwm and a timer properly instead of
adding more code complexity.

In addition, simplifying the code will allow you to use the timer-of
code and reduce very significantly the init function.

>>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>> ---
>>>  drivers/clocksource/Kconfig         |   8 ++
>>>  drivers/clocksource/Makefile        |   1 +
>>>  drivers/clocksource/timer-ingenic.c | 278
>>> ++++++++++++++++++++++++++++++++++++
>>>  3 files changed, 287 insertions(+)
>>>  create mode 100644 drivers/clocksource/timer-ingenic.c
>>>
>>>  v2: Use SPDX identifier for the license
>>>  v3: - Move documentation to its own patch
>>>      - Search the devicetree for PWM clients, and use all the TCU
>>>        channels that won't be used for PWM
>>>  v4: - Add documentation about why we search for PWM clients
>>>      - Verify that the PWM clients are for the TCU PWM driver
>>>
>>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>>> index d2e5382821a4..481422145fb4 100644
>>> --- a/drivers/clocksource/Kconfig
>>> +++ b/drivers/clocksource/Kconfig
>>> @@ -592,4 +592,12 @@ config CLKSRC_ST_LPC
>>>        Enable this option to use the Low Power controller timer
>>>        as clocksource.
>>>
>>> +config INGENIC_TIMER
>>> +    bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
>>> +    depends on MACH_INGENIC || COMPILE_TEST
>>
>> bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" if COMPILE_TEST
>>
>> Remove the depends MACH_INGENIC.
> 
> This driver is not useful on anything else than Ingenic SoCs, why should I
> remove MACH_INGENIC then?

For COMPILE_TEST on x86.

>>> +    select CLKSRC_OF
>>> +    default y
>>
>> No default, Kconfig platform selects the timer.
> 
> Alright.
[ ... ]

-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers
  2018-03-28 15:33                 ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers, Paul Cercueil
@ 2018-03-28 16:28                   ` Rob Herring
  2018-03-29 15:59                     ` Paul Cercueil
  0 siblings, 1 reply; 80+ messages in thread
From: Rob Herring @ 2018-03-28 16:28 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, Linux-MIPS, linux-doc

On Wed, Mar 28, 2018 at 10:33 AM, Paul Cercueil <paul@crapouillou.net> wrote:
> Le 2018-03-27 16:46, Rob Herring a écrit :
>>
>> On Sun, Mar 18, 2018 at 12:28:57AM +0100, Paul Cercueil wrote:
>>>
>>> Add documentation about how to properly use the Ingenic TCU
>>> (Timer/Counter Unit) drivers from devicetree.
>>>
>>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>> ---
>>>  .../bindings/clock/ingenic,tcu-clocks.txt          | 42 ++++++++++++++++
>>>  .../bindings/interrupt-controller/ingenic,tcu.txt  | 39 +++++++++++++++
>>>  .../devicetree/bindings/mfd/ingenic,tcu.txt        | 56
>>> ++++++++++++++++++++++
>>>  .../devicetree/bindings/timer/ingenic,tcu.txt      | 41 ++++++++++++++++
>>>  4 files changed, 178 insertions(+)
>>>  create mode 100644
>>> Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>>>  create mode 100644
>>> Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>>>  create mode 100644 Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>>>  create mode 100644
>>> Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>
>>>  v4: New patch in this series. Corresponds to V2 patches 3-4-5 with
>>>  added content.
>>> +/ {
>>> +       tcu: mfd@10002000 {
>>> +               compatible = "ingenic,tcu", "simple-mfd", "syscon";
>>> +               reg = <0x10002000 0x1000>;
>>> +               #address-cells = <1>;
>>> +               #size-cells = <1>;
>>> +               ranges = <0x0 0x10002000 0x1000>;
>>> +
>>> +               tcu_timer: timer@10 {
>>> +                       compatible = "ingenic,jz4740-tcu";
>>> +                       reg = <0x10 0xff0>;
>>> +
>>> +                       clocks = <&tcu_clk 0>, <&tcu_clk 1>, <&tcu_clk
>>> 2>, <&tcu_clk 3>,
>>> +                                        <&tcu_clk 4>, <&tcu_clk 5>,
>>> <&tcu_clk 6>, <&tcu_clk 7>;
>>> +                       clock-names = "timer0", "timer1", "timer2",
>>> "timer3",
>>> +                                                 "timer4", "timer5",
>>> "timer6", "timer7";
>>> +
>>> +                       interrupt-parent = <&tcu_irq>;
>>> +                       interrupts = <0 1 2 3 4 5 6 7>;
>>
>>
>> Thinking about this some more... You simply have 8 timers (and no other
>> functions?) with some internal clock and irq controls for each timer. I
>> don't think it really makes sense to create separate clock and irq
>> drivers in that case. That would be like creating clock drivers for
>> every clock divider in timers, pwms, uarts, etc. Unless the clocks get
>> exposed to other parts of the system, then there is no point.
>
>
> I have 8 timers with some internal clock and IRQ controls, that can be used
> as PWM.

Please include how you plan to do the PWM support too. I need a
complete picture of the h/w, not piecemeal, evolving bindings.

> But the TCU also controls the IRQ of the OS Timer (which is
> separate),
> as well as masking of the clocks for the OS timer and the watchdog.

The OS timer and watchdog are different blocks outside the TCU? This
doesn't seem to be the case based on the register definitions.

> I thought having clean drivers for different frameworks working on the same
> regmap was cleaner than having one big-ass driver handling everything.

DT is not the only way to instantiate drivers and how one OS splits
drivers should not define your DT binding. An MFD driver can create
child devices and a single DT node can be a provider of multiple
things. It is appropriate for an MFD to have child nodes primarily
when the sub devices need their own resources defined as properties in
DT or when the sub device is an IP block reused in multiple devices.
Just to have a node per driver/provider is not what should drive the
decision.

Rob

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks
  2018-03-28 15:04                 ` [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks, Paul Cercueil
@ 2018-03-28 18:35                   ` Mathieu Malaterre
  0 siblings, 0 replies; 80+ messages in thread
From: Mathieu Malaterre @ 2018-03-28 18:35 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Rob Herring, Jonathan Corbet,
	Mark Rutland, James Hogan, Maarten ter Huurne, linux-clk,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML,
	Linux-MIPS, linux-doc

On Wed, Mar 28, 2018 at 5:04 PM, Paul Cercueil <paul@crapouillou.net> wrote:
> Le 2018-03-20 08:15, Mathieu Malaterre a écrit :
>>
>> Hi Paul,
>>
>> Two things:
>>
>> On Sun, Mar 18, 2018 at 12:28 AM, Paul Cercueil <paul@crapouillou.net>
>> wrote:
>>>
>>> This header provides clock numbers for the ingenic,tcu
>>> DT binding.
>>
>>
>> I have tested the whole series on my Creator CI20 with success, using:
>>
>> + tcu@10002000 {
>> + compatible = "ingenic,jz4780-tcu";
>> + reg = <0x10002000 0x140>;
>> +
>> + interrupt-parent = <&intc>;
>> + interrupts = <27 26 25>;
>> + };
>>
>>
>> So:
>>
>> Tested-by: Mathieu Malaterre <malat@debian.org>
>
>
> Great! Is that for the whole patchset or just this one patch?

The sentence just above was "whole series"  :) so yes that was for the
whole series. Technically I only tested it on JZ4780, I hope this is
acceptable for the tag.



>
>>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>> Reviewed-by: Rob Herring <robh@kernel.org>
>>> ---
>>>  include/dt-bindings/clock/ingenic,tcu.h | 23 +++++++++++++++++++++++
>>>  1 file changed, 23 insertions(+)
>>>  create mode 100644 include/dt-bindings/clock/ingenic,tcu.h
>>>
>>>  v2: Use SPDX identifier for the license
>>>  v3: No change
>>>  v4: No change
>>>
>>> diff --git a/include/dt-bindings/clock/ingenic,tcu.h
>>> b/include/dt-bindings/clock/ingenic,tcu.h
>>> new file mode 100644
>>> index 000000000000..179815d7b3bb
>>> --- /dev/null
>>> +++ b/include/dt-bindings/clock/ingenic,tcu.h
>>> @@ -0,0 +1,23 @@
>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>> +/*
>>> + * This header provides clock numbers for the ingenic,tcu DT binding.
>>> + */
>>> +
>>> +#ifndef __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
>>> +#define __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
>>> +
>>> +#define JZ4740_CLK_TIMER0      0
>>> +#define JZ4740_CLK_TIMER1      1
>>> +#define JZ4740_CLK_TIMER2      2
>>> +#define JZ4740_CLK_TIMER3      3
>>> +#define JZ4740_CLK_TIMER4      4
>>> +#define JZ4740_CLK_TIMER5      5
>>> +#define JZ4740_CLK_TIMER6      6
>>> +#define JZ4740_CLK_TIMER7      7
>>> +#define JZ4740_CLK_WDT         8
>>> +#define JZ4740_CLK_LAST                JZ4740_CLK_WDT
>>> +
>>> +#define JZ4770_CLK_OST         9
>>> +#define JZ4770_CLK_LAST                JZ4770_CLK_OST
>>> +
>>
>>
>> When working on JZ4780 support, I always struggle to read those kind
>> of #define. Since this is a new patch would you mind changing
>> s/JZ4740/JZ47XX/ in your header ?
>
>
> Well the idea was that these defines are for JZ4740 and newer.
> But that means all Ingenic SoCs, so I guess I can change it.
>
>> Thanks for your work on JZ !
>
>
> Sure, thank you for testing!
>
>
>>> +#endif /* __DT_BINDINGS_CLOCK_INGENIC_TCU_H__ */
>>> --
>>> 2.11.0
>>>
>>>
>

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver
  2018-03-28 16:25                   ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver Daniel Lezcano
@ 2018-03-29 14:52                     ` Paul Cercueil
  2018-03-31  8:10                       ` Daniel Lezcano
  0 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-03-29 14:52 UTC (permalink / raw)
  To: Daniel Lezcano
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Ralf Baechle, Rob Herring, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc



Le mer. 28 mars 2018 à 18:25, Daniel Lezcano 
<daniel.lezcano@linaro.org> a écrit :
> On 28/03/2018 17:15, Paul Cercueil wrote:
>>  Le 2018-03-24 07:26, Daniel Lezcano a écrit :
>>>  On 18/03/2018 00:29, Paul Cercueil wrote:
>>>>  This driver will use the TCU (Timer Counter Unit) present on the 
>>>> Ingenic
>>>>  JZ47xx SoCs to provide the kernel with a clocksource and timers.
>>> 
>>>  Please provide a more detailed description about the timer.
>> 
>>  There's a doc file for that :)
> 
> Usually, when there is a new driver I ask for a description in the
> changelog for reference.
> 
>>>  Where is the clocksource ?
>> 
>>  Right, there is no clocksource, just timers.
>> 
>>>  I don't see the point of using channel idx and pwm checking here.
>>> 
>>>  There is one clockevent, why create multiple channels ? Can't you 
>>> stick
>>>  to the usual init routine for a timer.
>> 
>>  So the idea is that we use all the TCU channels that won't be used 
>> for PWM
>>  as timers. Hence the PWM checking. Why is this bad?
> 
> It is not bad but arguable. By checking the channels used by the pwm 
> in
> the code, you introduce an adherence between two subsystems even if it
> is just related to the DT parsing part.
> 
> As it is not needed to have more than one timer in the time framework
> (at least with the same characteristics), the pwm channels check is
> pointless. We can assume the author of the DT file is smart enough to
> prevent conflicts and define a pwm and a timer properly instead of
> adding more code complexity.
> 
> In addition, simplifying the code will allow you to use the timer-of
> code and reduce very significantly the init function.

That's what I had in my V1 and V2, my DT node for the timer-ingenic 
driver
had a "timers" property (e.g. "timers = <4 5>;") to select the channels 
that
should be used as timers. Then Rob told me I shouldn't do that, and 
instead
detect the channels that will be used for PWM.

>>>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>>>  ---
>>>>   drivers/clocksource/Kconfig         |   8 ++
>>>>   drivers/clocksource/Makefile        |   1 +
>>>>   drivers/clocksource/timer-ingenic.c | 278
>>>>  ++++++++++++++++++++++++++++++++++++
>>>>   3 files changed, 287 insertions(+)
>>>>   create mode 100644 drivers/clocksource/timer-ingenic.c
>>>> 
>>>>   v2: Use SPDX identifier for the license
>>>>   v3: - Move documentation to its own patch
>>>>       - Search the devicetree for PWM clients, and use all the TCU
>>>>         channels that won't be used for PWM
>>>>   v4: - Add documentation about why we search for PWM clients
>>>>       - Verify that the PWM clients are for the TCU PWM driver
>>>> 
>>>>  diff --git a/drivers/clocksource/Kconfig 
>>>> b/drivers/clocksource/Kconfig
>>>>  index d2e5382821a4..481422145fb4 100644
>>>>  --- a/drivers/clocksource/Kconfig
>>>>  +++ b/drivers/clocksource/Kconfig
>>>>  @@ -592,4 +592,12 @@ config CLKSRC_ST_LPC
>>>>         Enable this option to use the Low Power controller timer
>>>>         as clocksource.
>>>> 
>>>>  +config INGENIC_TIMER
>>>>  +    bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
>>>>  +    depends on MACH_INGENIC || COMPILE_TEST
>>> 
>>>  bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" if 
>>> COMPILE_TEST
>>> 
>>>  Remove the depends MACH_INGENIC.
>> 
>>  This driver is not useful on anything else than Ingenic SoCs, why 
>> should I
>>  remove MACH_INGENIC then?
> 
> For COMPILE_TEST on x86.

Well that's a logical OR right here, so it will work...

>>>>  +    select CLKSRC_OF
>>>>  +    default y
>>> 
>>>  No default, Kconfig platform selects the timer.
>> 
>>  Alright.
> [ ... ]
> 
> --
>  <http://www.linaro.org/> Linaro.org │ Open source software for ARM 
> SoCs
> 
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
> 

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers
  2018-03-28 16:28                   ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Rob Herring
@ 2018-03-29 15:59                     ` Paul Cercueil
  0 siblings, 0 replies; 80+ messages in thread
From: Paul Cercueil @ 2018-03-29 15:59 UTC (permalink / raw)
  To: Rob Herring
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Daniel Lezcano, Ralf Baechle, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, Linux-MIPS, linux-doc

Hi Rob,

Le mer. 28 mars 2018 à 18:28, Rob Herring <robh@kernel.org> a écrit :
> On Wed, Mar 28, 2018 at 10:33 AM, Paul Cercueil 
> <paul@crapouillou.net> wrote:
>>  Le 2018-03-27 16:46, Rob Herring a écrit :
>>> 
>>>  On Sun, Mar 18, 2018 at 12:28:57AM +0100, Paul Cercueil wrote:
>>>> 
>>>>  Add documentation about how to properly use the Ingenic TCU
>>>>  (Timer/Counter Unit) drivers from devicetree.
>>>> 
>>>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>>>  ---
>>>>   .../bindings/clock/ingenic,tcu-clocks.txt          | 42 
>>>> ++++++++++++++++
>>>>   .../bindings/interrupt-controller/ingenic,tcu.txt  | 39 
>>>> +++++++++++++++
>>>>   .../devicetree/bindings/mfd/ingenic,tcu.txt        | 56
>>>>  ++++++++++++++++++++++
>>>>   .../devicetree/bindings/timer/ingenic,tcu.txt      | 41 
>>>> ++++++++++++++++
>>>>   4 files changed, 178 insertions(+)
>>>>   create mode 100644
>>>>  Documentation/devicetree/bindings/clock/ingenic,tcu-clocks.txt
>>>>   create mode 100644
>>>>  
>>>> Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
>>>>   create mode 100644 
>>>> Documentation/devicetree/bindings/mfd/ingenic,tcu.txt
>>>>   create mode 100644
>>>>  Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>>> 
>>>>   v4: New patch in this series. Corresponds to V2 patches 3-4-5 
>>>> with
>>>>   added content.
>>>>  +/ {
>>>>  +       tcu: mfd@10002000 {
>>>>  +               compatible = "ingenic,tcu", "simple-mfd", 
>>>> "syscon";
>>>>  +               reg = <0x10002000 0x1000>;
>>>>  +               #address-cells = <1>;
>>>>  +               #size-cells = <1>;
>>>>  +               ranges = <0x0 0x10002000 0x1000>;
>>>>  +
>>>>  +               tcu_timer: timer@10 {
>>>>  +                       compatible = "ingenic,jz4740-tcu";
>>>>  +                       reg = <0x10 0xff0>;
>>>>  +
>>>>  +                       clocks = <&tcu_clk 0>, <&tcu_clk 1>, 
>>>> <&tcu_clk
>>>>  2>, <&tcu_clk 3>,
>>>>  +                                        <&tcu_clk 4>, <&tcu_clk 
>>>> 5>,
>>>>  <&tcu_clk 6>, <&tcu_clk 7>;
>>>>  +                       clock-names = "timer0", "timer1", 
>>>> "timer2",
>>>>  "timer3",
>>>>  +                                                 "timer4", 
>>>> "timer5",
>>>>  "timer6", "timer7";
>>>>  +
>>>>  +                       interrupt-parent = <&tcu_irq>;
>>>>  +                       interrupts = <0 1 2 3 4 5 6 7>;
>>> 
>>> 
>>>  Thinking about this some more... You simply have 8 timers (and no 
>>> other
>>>  functions?) with some internal clock and irq controls for each 
>>> timer. I
>>>  don't think it really makes sense to create separate clock and irq
>>>  drivers in that case. That would be like creating clock drivers for
>>>  every clock divider in timers, pwms, uarts, etc. Unless the clocks 
>>> get
>>>  exposed to other parts of the system, then there is no point.
>> 
>> 
>>  I have 8 timers with some internal clock and IRQ controls, that can 
>> be used
>>  as PWM.
> 
> Please include how you plan to do the PWM support too. I need a
> complete picture of the h/w, not piecemeal, evolving bindings.

Alright.

>>  But the TCU also controls the IRQ of the OS Timer (which is
>>  separate),
>>  as well as masking of the clocks for the OS timer and the watchdog.
> 
> The OS timer and watchdog are different blocks outside the TCU? This
> doesn't seem to be the case based on the register definitions.

Their register areas are mostly separate, although contiguous. On the 
other
hand, the watchdog and OST can be started/stopped from a bit within a 
TCU
register, so they're probably part of the same h/w block.

>>  I thought having clean drivers for different frameworks working on 
>> the same
>>  regmap was cleaner than having one big-ass driver handling 
>> everything.
> 
> DT is not the only way to instantiate drivers and how one OS splits
> drivers should not define your DT binding. An MFD driver can create
> child devices and a single DT node can be a provider of multiple
> things. It is appropriate for an MFD to have child nodes primarily
> when the sub devices need their own resources defined as properties in
> DT or when the sub device is an IP block reused in multiple devices.
> Just to have a node per driver/provider is not what should drive the
> decision.

The idea is not to have necesarily one node per driver. I just wanted 
to keep
it simple.

Regards,
-Paul

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver
  2018-03-29 14:52                     ` Paul Cercueil
@ 2018-03-31  8:10                       ` Daniel Lezcano
  2018-03-31 17:46                         ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver, Paul Cercueil
  0 siblings, 1 reply; 80+ messages in thread
From: Daniel Lezcano @ 2018-03-31  8:10 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Ralf Baechle, Rob Herring, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

On 29/03/2018 16:52, Paul Cercueil wrote:
> 
> 
> Le mer. 28 mars 2018 à 18:25, Daniel Lezcano <daniel.lezcano@linaro.org>
> a écrit :
>> On 28/03/2018 17:15, Paul Cercueil wrote:
>>>  Le 2018-03-24 07:26, Daniel Lezcano a écrit :
>>>>  On 18/03/2018 00:29, Paul Cercueil wrote:
>>>>>  This driver will use the TCU (Timer Counter Unit) present on the
>>>>> Ingenic
>>>>>  JZ47xx SoCs to provide the kernel with a clocksource and timers.
>>>>
>>>>  Please provide a more detailed description about the timer.
>>>
>>>  There's a doc file for that :)
>>
>> Usually, when there is a new driver I ask for a description in the
>> changelog for reference.
>>
>>>>  Where is the clocksource ?
>>>
>>>  Right, there is no clocksource, just timers.
>>>
>>>>  I don't see the point of using channel idx and pwm checking here.
>>>>
>>>>  There is one clockevent, why create multiple channels ? Can't you
>>>> stick
>>>>  to the usual init routine for a timer.
>>>
>>>  So the idea is that we use all the TCU channels that won't be used
>>> for PWM
>>>  as timers. Hence the PWM checking. Why is this bad?
>>
>> It is not bad but arguable. By checking the channels used by the pwm in
>> the code, you introduce an adherence between two subsystems even if it
>> is just related to the DT parsing part.
>>
>> As it is not needed to have more than one timer in the time framework
>> (at least with the same characteristics), the pwm channels check is
>> pointless. We can assume the author of the DT file is smart enough to
>> prevent conflicts and define a pwm and a timer properly instead of
>> adding more code complexity.
>>
>> In addition, simplifying the code will allow you to use the timer-of
>> code and reduce very significantly the init function.
> 
> That's what I had in my V1 and V2, my DT node for the timer-ingenic driver
> had a "timers" property (e.g. "timers = <4 5>;") to select the channels
> that
> should be used as timers. Then Rob told me I shouldn't do that, and instead
> detect the channels that will be used for PWM.
> 

[ ... ]

How do you specify the channels used for PWM ?

>>>>>
>>>>>  +config INGENIC_TIMER
>>>>>  +    bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
>>>>>  +    depends on MACH_INGENIC || COMPILE_TEST
>>>>
>>>>  bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" if
>>>> COMPILE_TEST
>>>>
>>>>  Remove the depends MACH_INGENIC.
>>>
>>>  This driver is not useful on anything else than Ingenic SoCs, why
>>> should I
>>>  remove MACH_INGENIC then?
>>
>> For COMPILE_TEST on x86.
> 
> Well that's a logical OR right here, so it will work...

Right, I missed the second part of the condition. For consistency
reason, we don't add a dependency on the platform. The platform will
select it. Look the other timer options and you will see there is no
MACH deps. I'm trying consolidating all these options to have same
format and hopefully factor them out.





-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver, 
  2018-03-31  8:10                       ` Daniel Lezcano
@ 2018-03-31 17:46                         ` Paul Cercueil
  2018-04-03  9:59                           ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver Daniel Lezcano
  0 siblings, 1 reply; 80+ messages in thread
From: Paul Cercueil @ 2018-03-31 17:46 UTC (permalink / raw)
  To: Daniel Lezcano
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Ralf Baechle, Rob Herring, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

Le 2018-03-31 10:10, Daniel Lezcano a écrit :
> On 29/03/2018 16:52, Paul Cercueil wrote:
>> 
>> 
>> Le mer. 28 mars 2018 à 18:25, Daniel Lezcano 
>> <daniel.lezcano@linaro.org>
>> a écrit :
>>> On 28/03/2018 17:15, Paul Cercueil wrote:
>>>>  Le 2018-03-24 07:26, Daniel Lezcano a écrit :
>>>>>  On 18/03/2018 00:29, Paul Cercueil wrote:
>>>>>>  This driver will use the TCU (Timer Counter Unit) present on the
>>>>>> Ingenic
>>>>>>  JZ47xx SoCs to provide the kernel with a clocksource and timers.
>>>>> 
>>>>>  Please provide a more detailed description about the timer.
>>>> 
>>>>  There's a doc file for that :)
>>> 
>>> Usually, when there is a new driver I ask for a description in the
>>> changelog for reference.
>>> 
>>>>>  Where is the clocksource ?
>>>> 
>>>>  Right, there is no clocksource, just timers.
>>>> 
>>>>>  I don't see the point of using channel idx and pwm checking here.
>>>>> 
>>>>>  There is one clockevent, why create multiple channels ? Can't you
>>>>> stick
>>>>>  to the usual init routine for a timer.
>>>> 
>>>>  So the idea is that we use all the TCU channels that won't be used
>>>> for PWM
>>>>  as timers. Hence the PWM checking. Why is this bad?
>>> 
>>> It is not bad but arguable. By checking the channels used by the pwm 
>>> in
>>> the code, you introduce an adherence between two subsystems even if 
>>> it
>>> is just related to the DT parsing part.
>>> 
>>> As it is not needed to have more than one timer in the time framework
>>> (at least with the same characteristics), the pwm channels check is
>>> pointless. We can assume the author of the DT file is smart enough to
>>> prevent conflicts and define a pwm and a timer properly instead of
>>> adding more code complexity.
>>> 
>>> In addition, simplifying the code will allow you to use the timer-of
>>> code and reduce very significantly the init function.
>> 
>> That's what I had in my V1 and V2, my DT node for the timer-ingenic 
>> driver
>> had a "timers" property (e.g. "timers = <4 5>;") to select the 
>> channels
>> that
>> should be used as timers. Then Rob told me I shouldn't do that, and 
>> instead
>> detect the channels that will be used for PWM.
>> 
> 
> [ ... ]
> 
> How do you specify the channels used for PWM ?

To detect the channels that will be used as PWM I parse the whole 
devicetree
searching for "pwms" properties; check that the PWM handle is for our 
TCU PWM
driver; then read the PWM number from there.

Of course it's hackish, and it only works for devicetree. I preferred 
the
method with the "timers" property.

>>>>>> 
>>>>>>  +config INGENIC_TIMER
>>>>>>  +    bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
>>>>>>  +    depends on MACH_INGENIC || COMPILE_TEST
>>>>> 
>>>>>  bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" if
>>>>> COMPILE_TEST
>>>>> 
>>>>>  Remove the depends MACH_INGENIC.
>>>> 
>>>>  This driver is not useful on anything else than Ingenic SoCs, why
>>>> should I
>>>>  remove MACH_INGENIC then?
>>> 
>>> For COMPILE_TEST on x86.
>> 
>> Well that's a logical OR right here, so it will work...
> 
> Right, I missed the second part of the condition. For consistency
> reason, we don't add a dependency on the platform. The platform will
> select it. Look the other timer options and you will see there is no
> MACH deps. I'm trying consolidating all these options to have same
> format and hopefully factor them out.

I'm all for factorisation, but what I dislike with not depending on
MACH_INGENIC, is that the driver now appears in the menuconfig for
every arch, even if it only applies to one MIPS SoC.

Regards,
-Paul

^ permalink raw reply	[flat|nested] 80+ messages in thread

* Re: [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver
  2018-03-31 17:46                         ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver, Paul Cercueil
@ 2018-04-03  9:59                           ` Daniel Lezcano
  0 siblings, 0 replies; 80+ messages in thread
From: Daniel Lezcano @ 2018-04-03  9:59 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Lee Jones,
	Ralf Baechle, Rob Herring, Jonathan Corbet, Mark Rutland,
	James Hogan, Maarten ter Huurne, linux-clk, devicetree,
	linux-kernel, linux-mips, linux-doc

On 31/03/2018 19:46, Paul Cercueil wrote:
> Le 2018-03-31 10:10, Daniel Lezcano a écrit :
>> On 29/03/2018 16:52, Paul Cercueil wrote:
>>>
>>>
>>> Le mer. 28 mars 2018 à 18:25, Daniel Lezcano <daniel.lezcano@linaro.org>
>>> a écrit :
>>>> On 28/03/2018 17:15, Paul Cercueil wrote:
>>>>>  Le 2018-03-24 07:26, Daniel Lezcano a écrit :
>>>>>>  On 18/03/2018 00:29, Paul Cercueil wrote:
>>>>>>>  This driver will use the TCU (Timer Counter Unit) present on the
>>>>>>> Ingenic
>>>>>>>  JZ47xx SoCs to provide the kernel with a clocksource and timers.
>>>>>>
>>>>>>  Please provide a more detailed description about the timer.
>>>>>
>>>>>  There's a doc file for that :)
>>>>
>>>> Usually, when there is a new driver I ask for a description in the
>>>> changelog for reference.
>>>>
>>>>>>  Where is the clocksource ?
>>>>>
>>>>>  Right, there is no clocksource, just timers.
>>>>>
>>>>>>  I don't see the point of using channel idx and pwm checking here.
>>>>>>
>>>>>>  There is one clockevent, why create multiple channels ? Can't you
>>>>>> stick
>>>>>>  to the usual init routine for a timer.
>>>>>
>>>>>  So the idea is that we use all the TCU channels that won't be used
>>>>> for PWM
>>>>>  as timers. Hence the PWM checking. Why is this bad?
>>>>
>>>> It is not bad but arguable. By checking the channels used by the pwm in
>>>> the code, you introduce an adherence between two subsystems even if it
>>>> is just related to the DT parsing part.
>>>>
>>>> As it is not needed to have more than one timer in the time framework
>>>> (at least with the same characteristics), the pwm channels check is
>>>> pointless. We can assume the author of the DT file is smart enough to
>>>> prevent conflicts and define a pwm and a timer properly instead of
>>>> adding more code complexity.
>>>>
>>>> In addition, simplifying the code will allow you to use the timer-of
>>>> code and reduce very significantly the init function.
>>>
>>> That's what I had in my V1 and V2, my DT node for the timer-ingenic
>>> driver
>>> had a "timers" property (e.g. "timers = <4 5>;") to select the channels
>>> that
>>> should be used as timers. Then Rob told me I shouldn't do that, and
>>> instead
>>> detect the channels that will be used for PWM.
>>>
>>
>> [ ... ]
>>
>> How do you specify the channels used for PWM ?
> 
> To detect the channels that will be used as PWM I parse the whole
> devicetree
> searching for "pwms" properties; check that the PWM handle is for our
> TCU PWM
> driver; then read the PWM number from there.
> 
> Of course it's hackish, and it only works for devicetree. I preferred the
> method with the "timers" property.

Do you have a DT portion describing that? Eg somewhere in the kernel's
git tree ?

>From what I understood, we can specify the channel for a pwm but not for
a timer, there is certainly something I'm missing.

>>>>>>>
>>>>>>>  +config INGENIC_TIMER
>>>>>>>  +    bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
>>>>>>>  +    depends on MACH_INGENIC || COMPILE_TEST
>>>>>>
>>>>>>  bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" if
>>>>>> COMPILE_TEST
>>>>>>
>>>>>>  Remove the depends MACH_INGENIC.
>>>>>
>>>>>  This driver is not useful on anything else than Ingenic SoCs, why
>>>>> should I
>>>>>  remove MACH_INGENIC then?
>>>>
>>>> For COMPILE_TEST on x86.
>>>
>>> Well that's a logical OR right here, so it will work...
>>
>> Right, I missed the second part of the condition. For consistency
>> reason, we don't add a dependency on the platform. The platform will
>> select it. Look the other timer options and you will see there is no
>> MACH deps. I'm trying consolidating all these options to have same
>> format and hopefully factor them out.
> 
> I'm all for factorisation, but what I dislike with not depending on
> MACH_INGENIC, is that the driver now appears in the menuconfig for
> every arch, even if it only applies to one MIPS SoC.

Can you do the following change?

bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" if COMPILE_TEST

so it will appear only when the COMPILE_TEST option is set whatever the
platform which is the purpose of this option to increase compile test
coverage.


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

^ permalink raw reply	[flat|nested] 80+ messages in thread

end of thread, other threads:[~2018-04-03  9:59 UTC | newest]

Thread overview: 80+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-29 12:59 [PATCH 0/6] Ingenic JZ47xx TCU drivers Paul Cercueil
2017-12-29 12:59 ` [PATCH 1/6] mfd: syscon: Add ingenic-tcu.h header Paul Cercueil
2018-01-01 14:33   ` [PATCH v2 " Paul Cercueil
2018-01-01 14:33     ` [PATCH v2 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2018-01-03 20:49       ` Rob Herring
2018-01-01 14:33     ` [PATCH v2 3/6] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
     [not found]       ` <20180101143344.2099-3-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
2018-01-03 20:58         ` Rob Herring
2018-01-03 21:50           ` Paul Cercueil
2018-01-01 14:33     ` [PATCH v2 4/6] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
2018-01-02 19:13       ` Stephen Boyd
2018-01-02 20:08         ` Paul Cercueil
2018-01-02 22:59           ` Stephen Boyd
2018-01-01 14:33     ` [PATCH v2 5/6] clocksource: Add a new timer-ingenic driver Paul Cercueil
2018-01-03 21:08       ` Rob Herring
2018-01-03 21:56         ` Paul Cercueil
     [not found]           ` <1515016576.1642.2-nb6JAIIttxhEPksTRSfcJOTW4wlIGRCZ@public.gmane.org>
2018-01-05 23:27             ` Rob Herring
     [not found]               ` <CAL_Jsq+DQnfX29AOJWMtH9ZB7=neOVwiyZggEuwOmazzVQ6MVg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-05 23:48                 ` Paul Cercueil
     [not found]                   ` <1515196105.2058.1-nb6JAIIttxhEPksTRSfcJOTW4wlIGRCZ@public.gmane.org>
2018-01-09  1:09                     ` Rob Herring
2018-01-01 14:33     ` [PATCH v2 6/6] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
2018-01-02 15:51     ` [PATCH v2 1/6] mfd: syscon: Add ingenic-tcu.h header Lee Jones
2018-01-10 22:48     ` [PATCH v3 1/9] " Paul Cercueil
2018-01-10 22:48       ` [PATCH v3 3/9] doc: dt-bindings: Add doc for Ingenic TCU IRQ driver Paul Cercueil
     [not found]         ` <20180110224838.16711-3-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
2018-01-19 21:05           ` Rob Herring
2018-01-10 22:48       ` [PATCH v3 4/9] doc: dt-bindings: Add doc for the Ingenic TCU clocks driver Paul Cercueil
     [not found]         ` <20180110224838.16711-4-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
2018-01-19 21:11           ` Rob Herring
2018-01-10 22:48       ` [PATCH v3 5/9] doc: dt-bindings: Add doc for the Ingenic TCU timers driver Paul Cercueil
2018-01-19 21:12         ` Rob Herring
2018-01-10 22:48       ` [PATCH v3 6/9] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
     [not found]         ` <20180110224838.16711-6-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
2018-01-11 15:38           ` Marc Zyngier
2018-01-11 16:25             ` Paul Cercueil
2018-01-20 13:06               ` Marc Zyngier
2018-01-22  9:26                 ` Lee Jones
2018-01-22  9:55                   ` Marc Zyngier
     [not found]                     ` <bdae1be4-0ed2-1b7d-8b08-7439ce06e762-5wv7dgnIgG8@public.gmane.org>
2018-01-22 11:46                       ` Lee Jones
2018-01-10 22:48       ` [PATCH v3 7/9] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
     [not found]         ` <20180110224838.16711-7-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
2018-01-27  0:37           ` Stephen Boyd
2018-01-10 22:48       ` [PATCH v3 8/9] clocksource: Add a new timer-ingenic driver Paul Cercueil
     [not found]         ` <20180110224838.16711-8-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
2018-01-11 14:53           ` Rob Herring
     [not found]             ` <CAL_Jsq+StZS1+qTd9CG1X2_3ay5onMgEmYG9MRUVWs-4K4-EZA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-11 16:16               ` Paul Cercueil
2018-01-10 22:48       ` [PATCH v3 9/9] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
     [not found]       ` <20180110224838.16711-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
2018-01-10 22:48         ` [PATCH v3 2/9] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2018-03-17 23:28           ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Paul Cercueil
2018-03-17 23:28             ` [PATCH v4 1/8] mfd: syscon: Add ingenic-tcu.h header Paul Cercueil
2018-03-17 23:28             ` [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2018-03-19 21:27               ` Stephen Boyd
2018-03-20  7:15               ` Mathieu Malaterre
2018-03-28 15:04                 ` [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks, Paul Cercueil
2018-03-28 18:35                   ` [PATCH v4 2/8] dt-bindings: ingenic: Add DT bindings for TCU clocks Mathieu Malaterre
2018-03-17 23:28             ` [PATCH v4 3/8] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2018-03-17 23:52               ` Randy Dunlap
2018-03-28 14:59                 ` [PATCH v4 3/8] doc: Add doc for the Ingenic TCU hardware, Paul Cercueil
2018-03-17 23:28             ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2018-03-20  8:52               ` Marc Zyngier
2018-03-28 15:09                 ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers, Paul Cercueil
2018-03-27 14:46               ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Rob Herring
2018-03-28 15:33                 ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers, Paul Cercueil
2018-03-28 16:28                   ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers Rob Herring
2018-03-29 15:59                     ` Paul Cercueil
2018-03-17 23:28             ` [PATCH v4 5/8] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
2018-03-17 23:28             ` [PATCH v4 6/8] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
2018-03-17 23:29             ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver Paul Cercueil
2018-03-24  6:26               ` Daniel Lezcano
2018-03-28 15:15                 ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver, Paul Cercueil
2018-03-28 16:25                   ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver Daniel Lezcano
2018-03-29 14:52                     ` Paul Cercueil
2018-03-31  8:10                       ` Daniel Lezcano
2018-03-31 17:46                         ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver, Paul Cercueil
2018-04-03  9:59                           ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver Daniel Lezcano
2018-03-17 23:29             ` [PATCH v4 8/8] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
2018-03-18 22:13             ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Daniel Lezcano
2018-03-28 15:01               ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers, Paul Cercueil
2018-03-28 15:10                 ` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers Daniel Lezcano
2018-01-23  9:52         ` [PATCH v3 1/9] mfd: syscon: Add ingenic-tcu.h header Lee Jones
2017-12-29 12:59 ` [PATCH 2/6] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2017-12-29 12:59 ` [PATCH 3/6] irqchip: Add the ingenic-tcu-intc driver Paul Cercueil
2017-12-29 12:59 ` [PATCH 4/6] clk: ingenic: Add JZ47xx TCU clocks driver Paul Cercueil
2017-12-29 14:02   ` Paul Cercueil
2018-01-01 12:47   ` kbuild test robot
2017-12-29 12:59 ` [PATCH 5/6] clocksource: Add a new timer-ingenic driver Paul Cercueil
2017-12-29 12:59 ` [PATCH 6/6] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).