From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Courbot Subject: Re: [PATCH V2 2/2] ARM64: tegra: Add device node for system PMIC MAX77620 Date: Thu, 9 Jun 2016 14:29:14 +0900 Message-ID: References: <1465299897-2491-1-git-send-email-ldewangan@nvidia.com> <1465299897-2491-2-git-send-email-ldewangan@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: <1465299897-2491-2-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Laxman Dewangan Cc: Thierry Reding , Stephen Warren , Will Deacon , Rob Herring , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" , Linux Kernel Mailing List , Arnd Bergmann List-Id: devicetree@vger.kernel.org On Tue, Jun 7, 2016 at 8:44 PM, Laxman Dewangan wrote: > Jetson-TX1 uses the Maxim MAX77620 as system Power management IC. > Add device node for the MAX77620 with following details: > - Add device max77620 with. > - Add all pins configurations. > - Configure FPS of the device. > - Configure SD/DCDC and LDOs regulators. > - populate the bus expander on base board P2597. > - Populate all fixed voltage regulators controlled by GPIOs from Tegra, > PMIC and bus expanders. > > For the different details, jetson-CV device tree files are referred from > downstream. I think Thierry posted a similar change: http://permalink.gmane.org/gmane.linux.ports.tegra/26815