From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ryan Case Subject: Re: [v5 6/7] drm/mediatek: change the dsi phytiming calculate method Date: Wed, 17 Jul 2019 15:03:02 -0700 Message-ID: References: <20190627080116.40264-1-jitao.shi@mediatek.com> <20190627080116.40264-7-jitao.shi@mediatek.com> <1561945387.17120.4.camel@mtksdaap41> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1561945387.17120.4.camel@mtksdaap41> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: CK Hu Cc: Mark Rutland , devicetree@vger.kernel.org, David Airlie , stonea168@163.com, dri-devel@lists.freedesktop.org, yingjoe.chen@mediatek.com, Ajay Kumar , Vincent Palatin , cawa.cheng@mediatek.com, bibby.hsieh@mediatek.com, Russell King , Thierry Reding , linux-pwm@vger.kernel.org, Jitao Shi , Sascha Hauer , Pawel Moll , Ian Campbell , Inki Dae , Rob Herring , linux-mediatek@lists.infradead.org, Andy Yan , Matthias Brugger , eddie.huang@mediatek.com, linux-arm-kernel@lists.infradead.org, Rahul Sharma , srv_heupstream@mediatek.com List-Id: devicetree@vger.kernel.org On Sun, Jun 30, 2019 at 6:43 PM CK Hu wrote: > > Hi, Jitao: > > On Thu, 2019-06-27 at 16:01 +0800, Jitao Shi wrote: > > Change the method of frame rate calc which can get more accurate > > frame rate. > > > > data rate = pixel_clock * bit_per_pixel / lanes > > Adjust hfp_wc to adapt the additional phy_data > > > > if MIPI_DSI_MODE_VIDEO_BURST > > hfp_wc = hfp * bpp - data_phy_cycles * lanes - 12 - 6; > > else > > hfp_wc = hfp * bpp - data_phy_cycles * lanes - 12; > > > > Note: > > //(2: 1 for sync, 1 for phy idle) > > data_phy_cycles = T_hs_exit + T_lpx + T_hs_prepare + T_hs_zero + 2; > > > > bpp: bit per pixel > > > > Signed-off-by: Jitao Shi > > Tested-by: Ryan Case > > Reviewed-by: CK Hu > > This version is different than previous version, so you should remove > Reviewed-by tag. For this version, I still give you a > > Reviewed-by: CK Hu > > > --- > > drivers/gpu/drm/mediatek/mtk_dsi.c | 117 ++++++++++++++++++++--------- > > 1 file changed, 80 insertions(+), 37 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c > > index 1621e8cdacc2..cefdcb1509cb 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c > > @@ -144,12 +144,6 @@ > > #define DATA_0 (0xff << 16) > > #define DATA_1 (0xff << 24) > > > > -#define T_LPX 5 > > -#define T_HS_PREP 6 > > -#define T_HS_TRAIL 8 > > -#define T_HS_EXIT 7 > > -#define T_HS_ZERO 10 > > - > > #define NS_TO_CYCLE(n, c) ((n) / (c) + (((n) % (c)) ? 1 : 0)) > > > > #define MTK_DSI_HOST_IS_READ(type) \ > > @@ -158,6 +152,25 @@ > > (type == MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM) || \ > > (type == MIPI_DSI_DCS_READ)) > > > > +struct mtk_phy_timing { > > + u32 lpx; > > + u32 da_hs_prepare; > > + u32 da_hs_zero; > > + u32 da_hs_trail; > > + > > + u32 ta_go; > > + u32 ta_sure; > > + u32 ta_get; > > + u32 da_hs_exit; > > + > > + u32 clk_hs_zero; > > + u32 clk_hs_trail; > > + > > + u32 clk_hs_prepare; > > + u32 clk_hs_post; > > + u32 clk_hs_exit; > > +}; > > + > > struct phy; > > > > struct mtk_dsi_driver_data { > > @@ -188,6 +201,7 @@ struct mtk_dsi { > > enum mipi_dsi_pixel_format format; > > unsigned int lanes; > > struct videomode vm; > > + struct mtk_phy_timing phy_timing; > > int refcount; > > bool enabled; > > u32 irq_data; > > @@ -221,17 +235,36 @@ static void mtk_dsi_phy_timconfig(struct mtk_dsi *dsi) > > { > > u32 timcon0, timcon1, timcon2, timcon3; > > u32 ui, cycle_time; > > + struct mtk_phy_timing *timing = &dsi->phy_timing; > > + > > + ui = 1000000000 / dsi->data_rate; > > + cycle_time = div_u64(8000000000ULL, dsi->data_rate); > > + > > + timing->lpx = NS_TO_CYCLE(60, cycle_time); > > + timing->da_hs_prepare = NS_TO_CYCLE(40 + 5 * ui, cycle_time); > > + timing->da_hs_zero = NS_TO_CYCLE(110 + 6 * ui, cycle_time); > > + timing->da_hs_trail = NS_TO_CYCLE(80 + 4 * ui, cycle_time); > > > > - ui = 1000 / dsi->data_rate + 0x01; > > - cycle_time = 8000 / dsi->data_rate + 0x01; > > + timing->ta_go = 4 * timing->lpx; > > + timing->ta_sure = 3 * timing->lpx / 2; > > + timing->ta_get = 5 * timing->lpx; > > + timing->da_hs_exit = 2 * timing->lpx; > > > > - timcon0 = T_LPX | T_HS_PREP << 8 | T_HS_ZERO << 16 | T_HS_TRAIL << 24; > > - timcon1 = 4 * T_LPX | (3 * T_LPX / 2) << 8 | 5 * T_LPX << 16 | > > - T_HS_EXIT << 24; > > - timcon2 = ((NS_TO_CYCLE(0x64, cycle_time) + 0xa) << 24) | > > - (NS_TO_CYCLE(0x150, cycle_time) << 16); > > - timcon3 = NS_TO_CYCLE(0x40, cycle_time) | (2 * T_LPX) << 16 | > > - NS_TO_CYCLE(80 + 52 * ui, cycle_time) << 8; > > + timing->clk_hs_zero = NS_TO_CYCLE(336, cycle_time); > > + timing->clk_hs_trail = NS_TO_CYCLE(100, cycle_time) + 10; > > + > > + timing->clk_hs_prepare = NS_TO_CYCLE(64, cycle_time); > > + timing->clk_hs_post = NS_TO_CYCLE(80 + 52 * ui, cycle_time); > > + timing->clk_hs_exit = 2 * timing->lpx; > > + > > + timcon0 = timing->lpx | timing->da_hs_prepare << 8 | > > + timing->da_hs_zero << 16 | timing->da_hs_trail << 24; > > + timcon1 = timing->ta_go | timing->ta_sure << 8 | > > + timing->ta_get << 16 | timing->da_hs_exit << 24; > > + timcon2 = 1 << 8 | timing->clk_hs_zero << 16 | > > + timing->clk_hs_trail << 24; > > + timcon3 = timing->clk_hs_prepare | timing->clk_hs_post << 8 | > > + timing->clk_hs_exit << 16; > > > > writel(timcon0, dsi->regs + DSI_PHY_TIMECON0); > > writel(timcon1, dsi->regs + DSI_PHY_TIMECON1); > > @@ -418,7 +451,8 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi) > > u32 horizontal_sync_active_byte; > > u32 horizontal_backporch_byte; > > u32 horizontal_frontporch_byte; > > - u32 dsi_tmp_buf_bpp; > > + u32 dsi_tmp_buf_bpp, data_phy_cycles; > > + struct mtk_phy_timing *timing = &dsi->phy_timing; > > > > struct videomode *vm = &dsi->vm; > > > > @@ -445,7 +479,34 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi) > > horizontal_backporch_byte = ((vm->hback_porch + vm->hsync_len) * > > dsi_tmp_buf_bpp - 10); > > > > - horizontal_frontporch_byte = (vm->hfront_porch * dsi_tmp_buf_bpp - 12); > > + data_phy_cycles = timing->lpx + timing->da_hs_prepare + > > + timing->da_hs_zero + timing->da_hs_exit + 2; > > + > > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) { > > + if (vm->hfront_porch * dsi_tmp_buf_bpp > > > + data_phy_cycles * dsi->lanes + 18) { > > + horizontal_frontporch_byte = vm->hfront_porch * > > + dsi_tmp_buf_bpp - > > + data_phy_cycles * > > + dsi->lanes - 18; > > + } else { > > + DRM_WARN("HFP less than d-phy, FPS will under 60Hz\n"); > > + horizontal_frontporch_byte = vm->hfront_porch * > > + dsi_tmp_buf_bpp; > > + } > > + } else { > > + if (vm->hfront_porch * dsi_tmp_buf_bpp > > > + data_phy_cycles * dsi->lanes + 12) { > > + horizontal_frontporch_byte = vm->hfront_porch * > > + dsi_tmp_buf_bpp - > > + data_phy_cycles * > > + dsi->lanes - 12; > > + } else { > > + DRM_WARN("HFP less than d-phy, FPS will under 60Hz\n"); > > + horizontal_frontporch_byte = vm->hfront_porch * > > + dsi_tmp_buf_bpp; > > + } > > + } > > > > writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC); > > writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC); > > @@ -545,8 +606,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) > > { > > struct device *dev = dsi->->host.dev; > > int ret; > > - u64 pixel_clock, total_bits; > > - u32 htotal, htotal_bits, bit_per_pixel, overhead_cycles, overhead_bits; > > + u32 bit_per_pixel; > > > > if (++dsi->refcount != 1) > > return 0; > > @@ -565,24 +625,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) > > break; > > } > > > > - /** > > - * htotal_time = htotal * byte_per_pixel / num_lanes > > - * overhead_time = lpx + hs_prepare + hs_zero + hs_trail + hs_exit > > - * mipi_ratio = (htotal_time + overhead_time) / htotal_time > > - * data_rate = pixel_clock * bit_per_pixel * mipi_ratio / num_lanes; > > - */ > > - pixel_clock = dsi->vm.pixelclock; > > - htotal = dsi->vm.hactive + dsi->vm.hback_porch + dsi->vm.hfront_porch + > > - dsi->vm.hsync_len; > > - htotal_bits = htotal * bit_per_pixel; > > - > > - overhead_cycles = T_LPX + T_HS_PREP + T_HS_ZERO + T_HS_TRAIL + > > - T_HS_EXIT; > > - overhead_bits = overhead_cycles * dsi->lanes * 8; > > - total_bits = htotal_bits + overhead_bits; > > - > > - dsi->data_rate = DIV_ROUND_UP_ULL(pixel_clock * total_bits, > > - htotal * dsi->lanes); > > + dsi->data_rate = DIV_ROUND_UP_ULL(dsi->vm.pixelclock * bit_per_pixel, dsi->lanes); nit: Wrap this line, it's over 80 characters. > > > > ret = clk_set_rate(dsi->hs_clk, dsi->data_rate); > > if (ret < 0) { > >