From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Blumenstingl Subject: Re: [RFCv2 8/9] dt-bindings: serial: meson-uart: convert to yaml Date: Tue, 6 Aug 2019 21:18:02 +0200 Message-ID: References: <20190805120320.32282-1-narmstrong@baylibre.com> <20190805120320.32282-9-narmstrong@baylibre.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190805120320.32282-9-narmstrong@baylibre.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Neil Armstrong Cc: linux-amlogic@lists.infradead.org, robh+dt@kernel.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi Neil, On Mon, Aug 5, 2019 at 2:06 PM Neil Armstrong wrote: > > Now that we have the DT validation in place, let's convert the device tree > bindings for the Amlogic UART Serial controller over to a YAML schemas. > > Signed-off-by: Neil Armstrong two nit-picks below, but overall this looks good: Reviewed-by: Martin Blumenstingl > --- > .../bindings/serial/amlogic,meson-uart.txt | 38 ---------- > .../bindings/serial/amlogic,meson-uart.yaml | 73 +++++++++++++++++++ > 2 files changed, 73 insertions(+), 38 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt > create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml > > diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt > deleted file mode 100644 > index c06c045126fc..000000000000 > --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt > +++ /dev/null > @@ -1,38 +0,0 @@ > -Amlogic Meson SoC UART Serial Interface > -======================================= > - > -The Amlogic Meson SoC UART Serial Interface is present on a large range > -of SoCs, and can be present either in the "Always-On" power domain or the > -"Everything-Else" power domain. > - > -The particularity of the "Always-On" Serial Interface is that the hardware > -is active since power-on and does not need any clock gating and is usable > -as very early serial console. > - > -Required properties: > -- compatible : compatible: value should be different for each SoC family as : > - - Meson6 : "amlogic,meson6-uart" > - - Meson8 : "amlogic,meson8-uart" > - - Meson8b : "amlogic,meson8b-uart" > - - GX (GXBB, GXL, GXM) : "amlogic,meson-gx-uart" > - eventually followed by : "amlogic,meson-ao-uart" if this UART interface > - is in the "Always-On" power domain. > -- reg : offset and length of the register set for the device. > -- interrupts : identifier to the device interrupt > -- clocks : a list of phandle + clock-specifier pairs, one for each > - entry in clock names. > -- clock-names : > - * "xtal" for external xtal clock identifier > - * "pclk" for the bus core clock, either the clk81 clock or the gate clock > - * "baud" for the source of the baudrate generator, can be either the xtal > - or the pclk. > - > -e.g. > -uart_A: serial@84c0 { > - compatible = "amlogic,meson-gx-uart"; > - reg = <0x0 0x84c0 0x0 0x14>; > - interrupts = ; > - /* Use xtal as baud rate clock source */ > - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; > - clock-names = "xtal", "pclk", "baud"; > -}; > diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml > new file mode 100644 > index 000000000000..5d48a8c04aa9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml > @@ -0,0 +1,73 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2019 BayLibre, SAS > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/serial/amlogic,meson-uart.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Amlogic Meson SoC UART Serial Interface > + > +maintainers: > + - Neil Armstrong > + > +description: | > + The Amlogic Meson SoC UART Serial Interface is present on a large range > + of SoCs, and can be present either in the "Always-On" power domain or the > + "Everything-Else" power domain. > + > + The particularity of the "Always-On" Serial Interface is that the hardware > + is active since power-on and does not need any clock gating and is usable > + as very early serial console. > + > +properties: > + compatible: > + oneOf: > + - description: Allways-on power domain UART controller Always instead of Allways [...] > +examples: > + - | > + serial@84c0 { > + compatible = "amlogic,meson-gx-uart"; > + reg = <0x84c0 0x14>; > + interrupts = <26>; > + clocks = <&xtal>, <&pclk>, <&xtal>; > + clock-names = "xtal", "pclk", "baud"; > + }; more a hint than a nit-pick: you can add #includes to the example, just like in the real .dtb then you can keep the GIC_SPI and IRQ_TYPE_... macros