devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alim Akhtar <alim.akhtar@gmail.com>
To: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
	jejb@linux.vnet.ibm.com, martin.petersen@oracle.com,
	vinayak holikatti <vinholikatti@gmail.com>,
	subhashj@codeaurora.org, devicetree@vger.kernel.org,
	Shaik Ameer Basha <shaik.ameer@samsung.com>
Subject: Re: [RFC PATCH V2] scsi: ufs: Add specific callback for setting DMA mask
Date: Wed, 16 May 2018 10:01:01 +0530	[thread overview]
Message-ID: <CAGOxZ52yZ8Xqype7AVsH43DWOA2byh2kW3SGsfHyHtzqSH6QPw@mail.gmail.com> (raw)
In-Reply-To: <1520507013-2410-1-git-send-email-alim.akhtar@samsung.com>

Ping !!!

On Thu, Mar 8, 2018 at 4:33 PM, Alim Akhtar <alim.akhtar@samsung.com> wrote:
> Currently DMA mask for UFS HCI is set by reading CAP register's
> [64AS] bit. Some HCI controller like Exynos support 36-bit bus address.
> This works perfectly fine with DMA mask set as 64 in case there is no
> IOMMU attached to HCI.
> In case if HCI is behind an IOMMU, setting DMA mask as 64 bit won't
> work as HCI has only 36bit addressing and SMMU has created mapping of
> 64 bit and as the device truncates the address, its mapping will not
> be found by iommu.
> To resolve such issues, let the variant driver sets its own DMA mask.
>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  drivers/scsi/ufs/ufshcd.c | 3 +++
>  drivers/scsi/ufs/ufshcd.h | 2 ++
>  2 files changed, 5 insertions(+)
>
> I am not sure if there are other ways available to handle such cases.
> The IOMMU I am talking about is arm-smmu and it DT binding does not
> give much idea about handling such cases.
> Have tested this patch with HCI controller with IOMMU attached.
>
> Changes Since V1:
>         - Fixed build issue as reported by Kbuild test robot.
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index a355d98..9a1374e 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -7781,6 +7781,9 @@ EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
>   */
>  static int ufshcd_set_dma_mask(struct ufs_hba *hba)
>  {
> +       if (hba->vops && hba->vops->set_dma_mask)
> +               return hba->vops->set_dma_mask(hba);
> +
>         if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) {
>                 if (!dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(64)))
>                         return 0;
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 1332e54..89c6dae 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -297,6 +297,7 @@ struct ufs_pwr_mode_info {
>   * @resume: called during host controller PM callback
>   * @dbg_register_dump: used to dump controller debug information
>   * @phy_initialization: used to initialize phys
> + * @set_dma_mask: used to set variant specific DMA mask
>   */
>  struct ufs_hba_variant_ops {
>         const char *name;
> @@ -325,6 +326,7 @@ struct ufs_hba_variant_ops {
>         int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
>         void    (*dbg_register_dump)(struct ufs_hba *hba);
>         int     (*phy_initialization)(struct ufs_hba *);
> +       int     (*set_dma_mask)(struct ufs_hba *hba);
>  };
>
>  /* clock gating state  */
> --
> 2.7.4
>



-- 
Regards,
Alim

  reply	other threads:[~2018-05-16  4:31 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20180308111416epcas1p4f9f1dbb36e8567121c6236ac0e9b4e03@epcas1p4.samsung.com>
2018-03-08 11:03 ` [RFC PATCH V2] scsi: ufs: Add specific callback for setting DMA mask Alim Akhtar
2018-05-16  4:31   ` Alim Akhtar [this message]
2018-05-16 21:31     ` Subhash Jadavani
2018-05-20  1:35       ` Alim Akhtar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAGOxZ52yZ8Xqype7AVsH43DWOA2byh2kW3SGsfHyHtzqSH6QPw@mail.gmail.com \
    --to=alim.akhtar@gmail.com \
    --cc=alim.akhtar@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=shaik.ameer@samsung.com \
    --cc=subhashj@codeaurora.org \
    --cc=vinholikatti@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).