devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <mripard@kernel.org>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	Icenowy Zheng <icenowy@aosc.io>,
	linux-sunxi <linux-sunxi@googlegroups.com>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	devicetree <devicetree@vger.kernel.org>,
	linux-amarula <linux-amarula@amarulasolutions.com>
Subject: Re: [PATCH v12 3/7] drm/sun4i: dsi: Add has_mod_clk quirk
Date: Tue, 3 Dec 2019 22:39:41 +0800	[thread overview]
Message-ID: <CAGb2v67kQ391QJhQYYYEdchHpRYBUDji=iYMZ9fKY3aCw0He-Q@mail.gmail.com> (raw)
In-Reply-To: <20191203134816.5319-4-jagan@amarulasolutions.com>

On Tue, Dec 3, 2019 at 9:48 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> As per the user manual, look like mod clock is not mandatory
> for all Allwinner MIPI DSI controllers, it is connected to
> CLK_DSI_SCLK for A31 and not available in A64.
>
> So add has_mod_clk quirk and process the mod clk accordingly.
>
> Tested-by: Merlijn Wajer <merlijn@wizzup.org>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v12:
> - none
>
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 38 ++++++++++++++++++--------
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h |  5 ++++
>  2 files changed, 32 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index c958ca9bae63..8c4c541224dd 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -11,6 +11,7 @@
>  #include <linux/crc-ccitt.h>
>  #include <linux/module.h>
>  #include <linux/of_address.h>
> +#include <linux/of_device.h>
>  #include <linux/phy/phy-mipi-dphy.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> @@ -1093,6 +1094,7 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
>         dsi->dev = dev;
>         dsi->host.ops = &sun6i_dsi_host_ops;
>         dsi->host.dev = dev;
> +       dsi->variant = of_device_get_match_data(dev);
>
>         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>         base = devm_ioremap_resource(dev, res);
> @@ -1120,17 +1122,20 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
>                 return PTR_ERR(dsi->reset);
>         }
>
> -       dsi->mod_clk = devm_clk_get(dev, "mod");
> -       if (IS_ERR(dsi->mod_clk)) {
> -               dev_err(dev, "Couldn't get the DSI mod clock\n");
> -               return PTR_ERR(dsi->mod_clk);
> +       if (dsi->variant->has_mod_clk) {
> +               dsi->mod_clk = devm_clk_get(dev, "mod");
> +               if (IS_ERR(dsi->mod_clk)) {
> +                       dev_err(dev, "Couldn't get the DSI mod clock\n");
> +                       return PTR_ERR(dsi->mod_clk);
> +               }
>         }
>
>         /*
>          * In order to operate properly, that clock seems to be always
>          * set to 297MHz.
>          */
> -       clk_set_rate_exclusive(dsi->mod_clk, 297000000);
> +       if (dsi->variant->has_mod_clk)
> +               clk_set_rate_exclusive(dsi->mod_clk, 297000000);

The clk API can handle NULL pointers, so you don't need to add the if here...

>
>         dsi->dphy = devm_phy_get(dev, "dphy");
>         if (IS_ERR(dsi->dphy)) {
> @@ -1160,7 +1165,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
>  err_pm_disable:
>         pm_runtime_disable(dev);
>  err_unprotect_clk:
> -       clk_rate_exclusive_put(dsi->mod_clk);
> +       if (dsi->variant->has_mod_clk)
> +               clk_rate_exclusive_put(dsi->mod_clk);

and here...

>         return ret;
>  }
>
> @@ -1172,7 +1178,8 @@ static int sun6i_dsi_remove(struct platform_device *pdev)
>         component_del(&pdev->dev, &sun6i_dsi_ops);
>         mipi_dsi_host_unregister(&dsi->host);
>         pm_runtime_disable(dev);
> -       clk_rate_exclusive_put(dsi->mod_clk);
> +       if (dsi->variant->has_mod_clk)
> +               clk_rate_exclusive_put(dsi->mod_clk);

and here ...

>
>         return 0;
>  }
> @@ -1189,7 +1196,8 @@ static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev)
>         }
>
>         reset_control_deassert(dsi->reset);
> -       clk_prepare_enable(dsi->mod_clk);
> +       if (dsi->variant->has_mod_clk)
> +               clk_prepare_enable(dsi->mod_clk);

and here...

>
>         /*
>          * Enable the DSI block.
> @@ -1217,7 +1225,8 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev)
>  {
>         struct sun6i_dsi *dsi = dev_get_drvdata(dev);
>
> -       clk_disable_unprepare(dsi->mod_clk);
> +       if (dsi->variant->has_mod_clk)
> +               clk_disable_unprepare(dsi->mod_clk);

and here.

>         reset_control_assert(dsi->reset);
>         regulator_disable(dsi->regulator);
>
> @@ -1230,9 +1239,16 @@ static const struct dev_pm_ops sun6i_dsi_pm_ops = {
>                            NULL)
>  };
>
> +static const struct sun6i_dsi_variant sun6i_a31_mipi_dsi = {
> +       .has_mod_clk = true,
> +};
> +
>  static const struct of_device_id sun6i_dsi_of_table[] = {
> -       { .compatible = "allwinner,sun6i-a31-mipi-dsi" },
> -       { }
> +       {
> +               .compatible = "allwinner,sun6i-a31-mipi-dsi",
> +               .data = &sun6i_a31_mipi_dsi,
> +       },
> +       { /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table);
>
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> index 3f4846f581ef..d791c9f6fccf 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> @@ -15,6 +15,10 @@
>
>  #define SUN6I_DSI_TCON_DIV     4
>
> +struct sun6i_dsi_variant {
> +       bool                    has_mod_clk;
> +};
> +

You could choose to put this above the probe function, since this isn't used
anywhere else, and a pointer field doesn't need the full definition.

ChenYu

>  struct sun6i_dsi {
>         struct drm_connector    connector;
>         struct drm_encoder      encoder;
> @@ -31,6 +35,7 @@ struct sun6i_dsi {
>         struct sun4i_drv        *drv;
>         struct mipi_dsi_device  *device;
>         struct drm_panel        *panel;
> +       const struct sun6i_dsi_variant  *variant;
>  };
>
>  static inline struct sun6i_dsi *host_to_sun6i_dsi(struct mipi_dsi_host *host)
> --
> 2.18.0.321.gffc6fa0e3
>

  reply	other threads:[~2019-12-03 14:39 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-03 13:48 [PATCH v12 0/7] drm/sun4i: Allwinner A64 MIPI-DSI support Jagan Teki
2019-12-03 13:48 ` [PATCH v12 1/7] dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller Jagan Teki
2019-12-04 13:36   ` Maxime Ripard
2019-12-16 11:07     ` Jagan Teki
2019-12-16 11:20       ` Maxime Ripard
2019-12-16 16:59         ` Jagan Teki
2019-12-16 18:34           ` Maxime Ripard
2019-12-17 12:06             ` Jagan Teki
2019-12-03 13:48 ` [PATCH v12 2/7] dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback) Jagan Teki
2019-12-03 19:18   ` Rob Herring
2019-12-03 13:48 ` [PATCH v12 3/7] drm/sun4i: dsi: Add has_mod_clk quirk Jagan Teki
2019-12-03 14:39   ` Chen-Yu Tsai [this message]
2019-12-03 16:40     ` Jagan Teki
2019-12-03 13:48 ` [PATCH v12 4/7] drm/sun4i: dsi: Handle bus clock via regmap_mmio_attach_clk Jagan Teki
2019-12-03 13:48 ` [PATCH v12 5/7] drm/sun4i: dsi: Add Allwinner A64 MIPI DSI support Jagan Teki
2019-12-03 13:48 ` [PATCH v12 6/7] arm64: dts: allwinner: a64: Add MIPI DSI pipeline Jagan Teki
2019-12-03 13:48 ` [DO NOT MERGE] [PATCH v12 7/7] arm64: dts: allwinner: bananapi-m64: Enable Bananapi S070WV20-CT16 DSI panel Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAGb2v67kQ391QJhQYYYEdchHpRYBUDji=iYMZ9fKY3aCw0He-Q@mail.gmail.com' \
    --to=wens@csie.org \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=icenowy@aosc.io \
    --cc=jagan@amarulasolutions.com \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=michael@amarulasolutions.com \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).