From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: Re: [linux-sunxi] [PATCH 2/3] rtc: sun6i: Add support for H6 RTC Date: Mon, 5 Aug 2019 18:54:17 +0800 Message-ID: References: <20190412120730.473-1-megous@megous.com> <20190412120730.473-3-megous@megous.com> <20190805104529.z3mex3m2tss7lzlr@core.my.home> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: <20190805104529.z3mex3m2tss7lzlr@core.my.home> Sender: linux-kernel-owner@vger.kernel.org To: =?UTF-8?Q?Ond=C5=99ej_Jirman?= , Chen-Yu Tsai , Alessandro Zummo , Alexandre Belloni , Rob Herring , Mark Rutland , Maxime Ripard , linux-rtc@vger.kernel.org, devicetree , linux-arm-kernel , linux-kernel , linux-sunxi List-Id: devicetree@vger.kernel.org On Mon, Aug 5, 2019 at 6:45 PM Ondřej Jirman wrote: > > On Mon, Aug 05, 2019 at 06:16:14PM +0800, Chen-Yu Tsai wrote: > > On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi > > wrote: > > > > > > From: Ondrej Jirman > > > > > > RTC on H6 is mostly the same as on H5 and H3. It has slight differences > > > mostly in features that are not yet supported by this driver. > > > > > > Some differences are already stated in the comments in existing code. > > > One other difference is that H6 has extra bit in LOSC_CTRL_REG, called > > > EXT_LOSC_EN to enable/disable external low speed crystal oscillator. > > > > > > It also has bit EXT_LOSC_STA in LOSC_AUTO_SWT_STA_REG, to check whether > > > external low speed oscillator is working correctly. > > > > > > This patch adds support for enabling LOSC when necessary: > > > > > > - during reparenting > > > - when probing the clock > > > > > > H6 also has capacbility to automatically reparent RTC clock from > > > external crystal oscillator, to internal RC oscillator, if external > > > oscillator fails. This is enabled by default. Disable it during > > > probe. > > > > > > Signed-off-by: Ondrej Jirman > > > --- > > > drivers/rtc/rtc-sun6i.c | 40 ++++++++++++++++++++++++++++++++++++++-- > > > 1 file changed, 38 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c > > > index 11f56de52179..7375a530c565 100644 > > > --- a/drivers/rtc/rtc-sun6i.c > > > +++ b/drivers/rtc/rtc-sun6i.c > > > @@ -41,9 +41,11 @@ > > > /* Control register */ > > > #define SUN6I_LOSC_CTRL 0x0000 > > > #define SUN6I_LOSC_CTRL_KEY (0x16aa << 16) > > > +#define SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS BIT(15) > > > > Manual says bit 14? Or is this different from LOSC_AUTO_SWT_EN? > > > > The rest looks ok. > > To give you more information. This is a new thing in H6 BSP, compared > to BSPs for previous SoCs (H5/H3). > > 20 #define REG_CLK32K_AUTO_SWT_EN BIT(14) > 21 #define REG_CLK32K_AUTO_SWT_BYPASS BIT(15) > > Init sequence changed in H6 BSP to: > > 646 /* > 647 * Step1: select RTC clock source > 648 */ > 649 tmp_data = readl(chip->base + SUNXI_LOSC_CTRL); > 650 tmp_data &= (~REG_CLK32K_AUTO_SWT_EN); > 651 > 652 /* Disable auto switch function */ > 653 tmp_data |= REG_CLK32K_AUTO_SWT_BYPASS; > 654 writel(tmp_data, chip->base + SUNXI_LOSC_CTRL); > 655 > 656 tmp_data = readl(chip->base + SUNXI_LOSC_CTRL); > 657 tmp_data |= (RTC_SOURCE_EXTERNAL | REG_LOSCCTRL_MAGIC); > 658 writel(tmp_data, chip->base + SUNXI_LOSC_CTRL); > 659 > 660 /* We need to set GSM after change clock source */ > 661 udelay(10); > 662 tmp_data = readl(chip->base + SUNXI_LOSC_CTRL); > 663 tmp_data |= (EXT_LOSC_GSM | REG_LOSCCTRL_MAGIC); > 664 writel(tmp_data, chip->base + SUNXI_LOSC_CTRL); > 665 I don't have this in my H6 BSPs. One is H6 Lichee v1.1 downloaded from Pine64. The link was from linux-sunxi wiki's H6 page. The other is a 4.9 kernel tree, which I believe is from Allwinner's github: https://github.com/Allwinner-Homlet/H6-BSP4.9-linux > For older BSPs, the init sequence looked like this: > > 482 /* > 483 * Step1: select RTC clock source > 484 */ > 485 tmp_data = sunxi_rtc_read(SUNXI_LOSC_CTRL_REG); > 486 tmp_data &= (~REG_CLK32K_AUTO_SWT_EN); > 487 tmp_data |= (RTC_SOURCE_EXTERNAL | REG_LOSCCTRL_MAGIC); > 488 tmp_data |= (EXT_LOSC_GSM); > 489 sunxi_rtc_write(tmp_data, SUNXI_LOSC_CTRL_REG); > 490 > > EXT_LOSC_GSM has values 4 values from low to high, and I guess it configures > gain for the oscillator's amplifier in the feedback loop of the circuit. > > So the new code, for some reason changed from single write to sequence > of individual writes/config steps: > > 1) disable auto-switch and enable auto-switch bypass > 2) select RTC clock source (to LOSC) > (wait) Maybe it's possible to glitch if these two are combined? > 3) configure gain on the LOSC > > regards, > o. > > > ChenYu > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190805104529.z3mex3m2tss7lzlr%40core.my.home.