* Re: [PATCH V5 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
[not found] ` <20191016135147.7743-3-aford173@gmail.com>
@ 2019-10-21 17:19 ` Tony Lindgren
0 siblings, 0 replies; 7+ messages in thread
From: Tony Lindgren @ 2019-10-21 17:19 UTC (permalink / raw)
To: Adam Ford
Cc: dri-devel, linux-omap, Thierry Reding, Sam Ravnborg,
David Airlie, Daniel Vetter, Rob Herring, Mark Rutland,
Tomi Valkeinen, Sebastian Reichel, Laurent Pinchart, devicetree,
linux-kernel
* Adam Ford <aford173@gmail.com> [191016 06:53]:
> With the removal of the panel-dpi from the omap drivers, the
> LCD no longer works. This patch points the device tree to
> a newly created panel named "logicpd,type28"
>
> Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
> ---
> V5: No Change
> V4: No Change
> V3: No change
> V2: Remove legacy 'label' from binding
I'm picking this patch into omap-for-v5.5/dt thanks.
Regards,
Tony
> diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
> index 07ac99b9cda6..cdb89b3e2a9b 100644
> --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
> +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
> @@ -11,22 +11,6 @@
> #include "logicpd-torpedo-37xx-devkit.dts"
>
> &lcd0 {
> -
> - label = "28";
> -
> - panel-timing {
> - clock-frequency = <9000000>;
> - hactive = <480>;
> - vactive = <272>;
> - hfront-porch = <3>;
> - hback-porch = <2>;
> - hsync-len = <42>;
> - vback-porch = <3>;
> - vfront-porch = <2>;
> - vsync-len = <11>;
> - hsync-active = <1>;
> - vsync-active = <1>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> + /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
> + compatible = "logicpd,type28";
> };
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
[not found] <20191016135147.7743-1-aford173@gmail.com>
[not found] ` <20191016135147.7743-3-aford173@gmail.com>
@ 2019-10-30 14:44 ` Adam Ford
2019-11-01 7:57 ` Laurent Pinchart
[not found] ` <20191016135147.7743-2-aford173@gmail.com>
2019-11-30 22:16 ` [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support Sam Ravnborg
3 siblings, 1 reply; 7+ messages in thread
From: Adam Ford @ 2019-10-30 14:44 UTC (permalink / raw)
To: dri-devel
Cc: Linux-OMAP, Thierry Reding, Sam Ravnborg, David Airlie,
Daniel Vetter, Rob Herring, Mark Rutland, Sebastian Reichel,
Tomi Valkeinen, Laurent Pinchart, devicetree,
Linux Kernel Mailing List
On Wed, Oct 16, 2019 at 8:52 AM Adam Ford <aford173@gmail.com> wrote:
>
> Previously, there was an omap panel-dpi driver that would
> read generic timings from the device tree and set the display
> timing accordingly. This driver was removed so the screen
> no longer functions. This patch modifies the panel-simple
> file to setup the timings to the same values previously used.
>
> Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")
>
Will this be able to make it into linux-next for the 5.5 merge window?
I believe Tony has picked up the device tree portion in his omap
tree, but I haven't seen any notifications on this series on whether
or not it's being applied. I also don't know which tree I need to
look if it's already been applied.
This fixes a regression introduced a while ago where the driver I was
using for the display was removed.
thank you,
adam
> Signed-off-by: Adam Ford <aford173@gmail.com>
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
> V5: No Change
> V4: No Change
> V3: No Change
> V2: No Change
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5d487686d25c..72f69709f349 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2061,6 +2061,40 @@ static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
> .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> };
>
> +static const struct drm_display_mode logicpd_type_28_mode = {
> + .clock = 9000,
> + .hdisplay = 480,
> + .hsync_start = 480 + 3,
> + .hsync_end = 480 + 3 + 42,
> + .htotal = 480 + 3 + 42 + 2,
> +
> + .vdisplay = 272,
> + .vsync_start = 272 + 2,
> + .vsync_end = 272 + 2 + 11,
> + .vtotal = 272 + 2 + 11 + 3,
> + .vrefresh = 60,
> + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
> +};
> +
> +static const struct panel_desc logicpd_type_28 = {
> + .modes = &logicpd_type_28_mode,
> + .num_modes = 1,
> + .bpc = 8,
> + .size = {
> + .width = 105,
> + .height = 67,
> + },
> + .delay = {
> + .prepare = 200,
> + .enable = 200,
> + .unprepare = 200,
> + .disable = 200,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
> + DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
> +};
> +
> static const struct panel_desc mitsubishi_aa070mc01 = {
> .modes = &mitsubishi_aa070mc01_mode,
> .num_modes = 1,
> @@ -3287,6 +3321,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "lg,lp129qe",
> .data = &lg_lp129qe,
> + }, {
> + .compatible = "logicpd,type28",
> + .data = &logicpd_type_28,
> }, {
> .compatible = "mitsubishi,aa070mc01-ca1",
> .data = &mitsubishi_aa070mc01,
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
2019-10-30 14:44 ` [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support Adam Ford
@ 2019-11-01 7:57 ` Laurent Pinchart
2019-11-11 13:19 ` Adam Ford
0 siblings, 1 reply; 7+ messages in thread
From: Laurent Pinchart @ 2019-11-01 7:57 UTC (permalink / raw)
To: Adam Ford, Sam Ravnborg
Cc: dri-devel, Linux-OMAP, Thierry Reding, David Airlie,
Daniel Vetter, Rob Herring, Mark Rutland, Sebastian Reichel,
Tomi Valkeinen, devicetree, Linux Kernel Mailing List
On Wed, Oct 30, 2019 at 09:44:20AM -0500, Adam Ford wrote:
> On Wed, Oct 16, 2019 at 8:52 AM Adam Ford <aford173@gmail.com> wrote:
> >
> > Previously, there was an omap panel-dpi driver that would
> > read generic timings from the device tree and set the display
> > timing accordingly. This driver was removed so the screen
> > no longer functions. This patch modifies the panel-simple
> > file to setup the timings to the same values previously used.
> >
> > Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")
>
> Will this be able to make it into linux-next for the 5.5 merge window?
> I believe Tony has picked up the device tree portion in his omap
> tree, but I haven't seen any notifications on this series on whether
> or not it's being applied. I also don't know which tree I need to
> look if it's already been applied.
>
> This fixes a regression introduced a while ago where the driver I was
> using for the display was removed.
Sam, would you be able to pick this up ?
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> > Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> > ---
> > V5: No Change
> > V4: No Change
> > V3: No Change
> > V2: No Change
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > index 5d487686d25c..72f69709f349 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -2061,6 +2061,40 @@ static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
> > .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> > };
> >
> > +static const struct drm_display_mode logicpd_type_28_mode = {
> > + .clock = 9000,
> > + .hdisplay = 480,
> > + .hsync_start = 480 + 3,
> > + .hsync_end = 480 + 3 + 42,
> > + .htotal = 480 + 3 + 42 + 2,
> > +
> > + .vdisplay = 272,
> > + .vsync_start = 272 + 2,
> > + .vsync_end = 272 + 2 + 11,
> > + .vtotal = 272 + 2 + 11 + 3,
> > + .vrefresh = 60,
> > + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
> > +};
> > +
> > +static const struct panel_desc logicpd_type_28 = {
> > + .modes = &logicpd_type_28_mode,
> > + .num_modes = 1,
> > + .bpc = 8,
> > + .size = {
> > + .width = 105,
> > + .height = 67,
> > + },
> > + .delay = {
> > + .prepare = 200,
> > + .enable = 200,
> > + .unprepare = 200,
> > + .disable = 200,
> > + },
> > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> > + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
> > + DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
> > +};
> > +
> > static const struct panel_desc mitsubishi_aa070mc01 = {
> > .modes = &mitsubishi_aa070mc01_mode,
> > .num_modes = 1,
> > @@ -3287,6 +3321,9 @@ static const struct of_device_id platform_of_match[] = {
> > }, {
> > .compatible = "lg,lp129qe",
> > .data = &lg_lp129qe,
> > + }, {
> > + .compatible = "logicpd,type28",
> > + .data = &logicpd_type_28,
> > }, {
> > .compatible = "mitsubishi,aa070mc01-ca1",
> > .data = &mitsubishi_aa070mc01,
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
2019-11-01 7:57 ` Laurent Pinchart
@ 2019-11-11 13:19 ` Adam Ford
2019-11-24 11:17 ` Adam Ford
0 siblings, 1 reply; 7+ messages in thread
From: Adam Ford @ 2019-11-11 13:19 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Sam Ravnborg, dri-devel, Linux-OMAP, Thierry Reding,
David Airlie, Daniel Vetter, Rob Herring, Mark Rutland,
Sebastian Reichel, Tomi Valkeinen, devicetree,
Linux Kernel Mailing List
On Fri, Nov 1, 2019 at 2:57 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> On Wed, Oct 30, 2019 at 09:44:20AM -0500, Adam Ford wrote:
> > On Wed, Oct 16, 2019 at 8:52 AM Adam Ford <aford173@gmail.com> wrote:
> > >
> > > Previously, there was an omap panel-dpi driver that would
> > > read generic timings from the device tree and set the display
> > > timing accordingly. This driver was removed so the screen
> > > no longer functions. This patch modifies the panel-simple
> > > file to setup the timings to the same values previously used.
> > >
> > > Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")
> >
> > Will this be able to make it into linux-next for the 5.5 merge window?
> > I believe Tony has picked up the device tree portion in his omap
> > tree, but I haven't seen any notifications on this series on whether
> > or not it's being applied. I also don't know which tree I need to
> > look if it's already been applied.
> >
> > This fixes a regression introduced a while ago where the driver I was
> > using for the display was removed.
>
> Sam, would you be able to pick this up ?
Gentle nudge with the merge window approaching.
Thank you,
adam
>
> > > Signed-off-by: Adam Ford <aford173@gmail.com>
> > > Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> > > ---
> > > V5: No Change
> > > V4: No Change
> > > V3: No Change
> > > V2: No Change
> > >
> > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > > index 5d487686d25c..72f69709f349 100644
> > > --- a/drivers/gpu/drm/panel/panel-simple.c
> > > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > > @@ -2061,6 +2061,40 @@ static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
> > > .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> > > };
> > >
> > > +static const struct drm_display_mode logicpd_type_28_mode = {
> > > + .clock = 9000,
> > > + .hdisplay = 480,
> > > + .hsync_start = 480 + 3,
> > > + .hsync_end = 480 + 3 + 42,
> > > + .htotal = 480 + 3 + 42 + 2,
> > > +
> > > + .vdisplay = 272,
> > > + .vsync_start = 272 + 2,
> > > + .vsync_end = 272 + 2 + 11,
> > > + .vtotal = 272 + 2 + 11 + 3,
> > > + .vrefresh = 60,
> > > + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
> > > +};
> > > +
> > > +static const struct panel_desc logicpd_type_28 = {
> > > + .modes = &logicpd_type_28_mode,
> > > + .num_modes = 1,
> > > + .bpc = 8,
> > > + .size = {
> > > + .width = 105,
> > > + .height = 67,
> > > + },
> > > + .delay = {
> > > + .prepare = 200,
> > > + .enable = 200,
> > > + .unprepare = 200,
> > > + .disable = 200,
> > > + },
> > > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> > > + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
> > > + DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
> > > +};
> > > +
> > > static const struct panel_desc mitsubishi_aa070mc01 = {
> > > .modes = &mitsubishi_aa070mc01_mode,
> > > .num_modes = 1,
> > > @@ -3287,6 +3321,9 @@ static const struct of_device_id platform_of_match[] = {
> > > }, {
> > > .compatible = "lg,lp129qe",
> > > .data = &lg_lp129qe,
> > > + }, {
> > > + .compatible = "logicpd,type28",
> > > + .data = &logicpd_type_28,
> > > }, {
> > > .compatible = "mitsubishi,aa070mc01-ca1",
> > > .data = &mitsubishi_aa070mc01,
>
> --
> Regards,
>
> Laurent Pinchart
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
2019-11-11 13:19 ` Adam Ford
@ 2019-11-24 11:17 ` Adam Ford
0 siblings, 0 replies; 7+ messages in thread
From: Adam Ford @ 2019-11-24 11:17 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Sam Ravnborg, dri-devel, Linux-OMAP, Thierry Reding,
David Airlie, Daniel Vetter, Rob Herring, Mark Rutland,
Sebastian Reichel, Tomi Valkeinen, devicetree,
Linux Kernel Mailing List
On Mon, Nov 11, 2019 at 7:19 AM Adam Ford <aford173@gmail.com> wrote:
>
> On Fri, Nov 1, 2019 at 2:57 AM Laurent Pinchart
> <laurent.pinchart@ideasonboard.com> wrote:
> >
> > On Wed, Oct 30, 2019 at 09:44:20AM -0500, Adam Ford wrote:
> > > On Wed, Oct 16, 2019 at 8:52 AM Adam Ford <aford173@gmail.com> wrote:
> > > >
> > > > Previously, there was an omap panel-dpi driver that would
> > > > read generic timings from the device tree and set the display
> > > > timing accordingly. This driver was removed so the screen
> > > > no longer functions. This patch modifies the panel-simple
> > > > file to setup the timings to the same values previously used.
> > > >
> > > > Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")
> > >
> > > Will this be able to make it into linux-next for the 5.5 merge window?
> > > I believe Tony has picked up the device tree portion in his omap
> > > tree, but I haven't seen any notifications on this series on whether
> > > or not it's being applied. I also don't know which tree I need to
> > > look if it's already been applied.
> > >
> > > This fixes a regression introduced a while ago where the driver I was
> > > using for the display was removed.
> >
> > Sam, would you be able to pick this up ?
>
Sam,
> Gentle nudge with the merge window approaching.
Is it too late for 5.5? :-(
adam
>
> Thank you,
>
> adam
>
> >
> > > > Signed-off-by: Adam Ford <aford173@gmail.com>
> > > > Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> > > > ---
> > > > V5: No Change
> > > > V4: No Change
> > > > V3: No Change
> > > > V2: No Change
> > > >
> > > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > > > index 5d487686d25c..72f69709f349 100644
> > > > --- a/drivers/gpu/drm/panel/panel-simple.c
> > > > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > > > @@ -2061,6 +2061,40 @@ static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
> > > > .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> > > > };
> > > >
> > > > +static const struct drm_display_mode logicpd_type_28_mode = {
> > > > + .clock = 9000,
> > > > + .hdisplay = 480,
> > > > + .hsync_start = 480 + 3,
> > > > + .hsync_end = 480 + 3 + 42,
> > > > + .htotal = 480 + 3 + 42 + 2,
> > > > +
> > > > + .vdisplay = 272,
> > > > + .vsync_start = 272 + 2,
> > > > + .vsync_end = 272 + 2 + 11,
> > > > + .vtotal = 272 + 2 + 11 + 3,
> > > > + .vrefresh = 60,
> > > > + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
> > > > +};
> > > > +
> > > > +static const struct panel_desc logicpd_type_28 = {
> > > > + .modes = &logicpd_type_28_mode,
> > > > + .num_modes = 1,
> > > > + .bpc = 8,
> > > > + .size = {
> > > > + .width = 105,
> > > > + .height = 67,
> > > > + },
> > > > + .delay = {
> > > > + .prepare = 200,
> > > > + .enable = 200,
> > > > + .unprepare = 200,
> > > > + .disable = 200,
> > > > + },
> > > > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> > > > + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
> > > > + DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
> > > > +};
> > > > +
> > > > static const struct panel_desc mitsubishi_aa070mc01 = {
> > > > .modes = &mitsubishi_aa070mc01_mode,
> > > > .num_modes = 1,
> > > > @@ -3287,6 +3321,9 @@ static const struct of_device_id platform_of_match[] = {
> > > > }, {
> > > > .compatible = "lg,lp129qe",
> > > > .data = &lg_lp129qe,
> > > > + }, {
> > > > + .compatible = "logicpd,type28",
> > > > + .data = &logicpd_type_28,
> > > > }, {
> > > > .compatible = "mitsubishi,aa070mc01-ca1",
> > > > .data = &mitsubishi_aa070mc01,
> >
> > --
> > Regards,
> >
> > Laurent Pinchart
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V5 2/3] dt-bindings: Add Logic PD Type 28 display panel
[not found] ` <20191016135147.7743-2-aford173@gmail.com>
@ 2019-11-30 22:15 ` Sam Ravnborg
0 siblings, 0 replies; 7+ messages in thread
From: Sam Ravnborg @ 2019-11-30 22:15 UTC (permalink / raw)
To: Adam Ford
Cc: dri-devel, linux-omap, Thierry Reding, David Airlie,
Daniel Vetter, Rob Herring, Mark Rutland, Sebastian Reichel,
Laurent Pinchart, Tomi Valkeinen, devicetree, linux-kernel
Hi Adam.
On Wed, Oct 16, 2019 at 08:51:46AM -0500, Adam Ford wrote:
> This patch adds documentation of device tree bindings for the WVGA panel
> Logic PD Type 28 display.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> V5: Replace GPIO_ACTIVE_HIGH with 0 to fix make dt_binding_check -k
> V4: Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1
> V3: Correct build errors from 'make dt_binding_check'
> V2: Use YAML instead of TXT for binding
>
Applied to drm-misc-next.
It was applied before the driver changes so we had bindings
for the driver changes when applied.
Sam
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
[not found] <20191016135147.7743-1-aford173@gmail.com>
` (2 preceding siblings ...)
[not found] ` <20191016135147.7743-2-aford173@gmail.com>
@ 2019-11-30 22:16 ` Sam Ravnborg
3 siblings, 0 replies; 7+ messages in thread
From: Sam Ravnborg @ 2019-11-30 22:16 UTC (permalink / raw)
To: Adam Ford
Cc: dri-devel, linux-omap, Thierry Reding, David Airlie,
Daniel Vetter, Rob Herring, Mark Rutland, Sebastian Reichel,
Tomi Valkeinen, Laurent Pinchart, devicetree, linux-kernel
Hi Adam.
On Wed, Oct 16, 2019 at 08:51:45AM -0500, Adam Ford wrote:
> Previously, there was an omap panel-dpi driver that would
> read generic timings from the device tree and set the display
> timing accordingly. This driver was removed so the screen
> no longer functions. This patch modifies the panel-simple
> file to setup the timings to the same values previously used.
>
> Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
> V5: No Change
> V4: No Change
> V3: No Change
> V2: No Change
Applied to drm-misc-next.
Sorry for the delay - has been absent for a while.
Sam
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-11-30 22:16 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20191016135147.7743-1-aford173@gmail.com>
[not found] ` <20191016135147.7743-3-aford173@gmail.com>
2019-10-21 17:19 ` [PATCH V5 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel Tony Lindgren
2019-10-30 14:44 ` [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support Adam Ford
2019-11-01 7:57 ` Laurent Pinchart
2019-11-11 13:19 ` Adam Ford
2019-11-24 11:17 ` Adam Ford
[not found] ` <20191016135147.7743-2-aford173@gmail.com>
2019-11-30 22:15 ` [PATCH V5 2/3] dt-bindings: Add Logic PD Type 28 display panel Sam Ravnborg
2019-11-30 22:16 ` [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support Sam Ravnborg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).