From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH, MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C2213C33C99 for ; Fri, 10 Jan 2020 04:47:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 769B12072E for ; Fri, 10 Jan 2020 04:47:17 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=chromium.org header.i=@chromium.org header.b="f9/ppNGd" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731334AbgAJErQ (ORCPT ); Thu, 9 Jan 2020 23:47:16 -0500 Received: from mail-io1-f68.google.com ([209.85.166.68]:34151 "EHLO mail-io1-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731311AbgAJErQ (ORCPT ); Thu, 9 Jan 2020 23:47:16 -0500 Received: by mail-io1-f68.google.com with SMTP id z193so688940iof.1 for ; Thu, 09 Jan 2020 20:47:15 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=juipWghhZWbOej2tFm4x/URTAk9uOvEv4SqCsturnT8=; b=f9/ppNGdbyyElGeebjLUQZkig5iEqnTw/UkTCsz69ugvMp/JhUOSULxTbTFWGW5ql2 ZFCTZBr8q4sVAecV5VVWHMt7JkShsqnx+2wChPjJUYdLp5vdKerUvH1gu0Oh0cWBvQpT Yb3xLWPcuc9Yf7SRLYBuSBHWvaG3upSwColWY= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=juipWghhZWbOej2tFm4x/URTAk9uOvEv4SqCsturnT8=; b=oxLSIg1naBTrB8YWRVnKH/3bdVmw2jHSn1JYALX9D1H8S/x2m5/pdKLaTrArrXgFEn l6O1HvmQ5x3U+ppr4JR2WsXEGKsueI/ITRHEdkR8ImKeyU8+Kvfi/ND0MAFswZs3wGzF jXUs3u0g/LsKR4LbIg6U+U6bA/euMOBNLNhrbFUCd7Q6fDrOv3xPMas+34TPb+LMAx06 kqcbVuZXPGVlxbJYNxRk0dP4EGvgmsv9OLJTwXweRhfiGGc9GcfQueXZO0TpwhZPtY1b 50mORW/mn4IvWav08Ui9b3XtTZ+ijIMZTWwrrYY5p372c87vfnW8a2mcpWVI2bisNdBI B4wg== X-Gm-Message-State: APjAAAVNkJUJWc5i6+mkD2QPZ1xpl8liZWyVke2FwNv4f/FC2JQZubUc n1PaVKXcb5GNVqoUBrKbvthXgpOfGQVrYA6eoHgrNg== X-Google-Smtp-Source: APXvYqz783Lx/zFNA6TOPFW5FUeaef0dBt2I9PMnsJzXSZfQ7xt1Za6edH9aOVY+3Ci26CzR2puTPqKhs7LEZm8kIkY= X-Received: by 2002:a5e:8703:: with SMTP id y3mr832669ioj.308.1578631634645; Thu, 09 Jan 2020 20:47:14 -0800 (PST) MIME-Version: 1.0 References: <20200109101042.201500-1-hsinyi@chromium.org> <20200109101042.201500-3-hsinyi@chromium.org> <5a2ebfb5-f0bd-bb42-0463-d2db74f7048d@collabora.com> In-Reply-To: <5a2ebfb5-f0bd-bb42-0463-d2db74f7048d@collabora.com> From: Hsin-Yi Wang Date: Fri, 10 Jan 2020 12:46:48 +0800 Message-ID: Subject: Re: [PATCH 2/2] arm64: dts: mediatek: add mt8173 elm and hana board To: Enric Balletbo i Serra Cc: "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" , Rob Herring , Mark Rutland , Matthias Brugger , Mars Cheng , Devicetree List , lkml , linux-mediatek@lists.infradead.org, Nicolas Boichat , Daniel Kurtz Content-Type: text/plain; charset="UTF-8" Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org On Thu, Jan 9, 2020 at 11:11 PM Enric Balletbo i Serra wrote: > > Hi Hsin-Yi, > > Many thanks for sending the patch upstream, some comments below ... > Thanks for the comments. I will fix up in next version. > On 9/1/20 11:10, Hsin-Yi Wang wrote: > > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > > SoC. > > > > Signed-off-by: Hsin-Yi Wang > > --- > > This depends on parade bridge ps8640, the driver's status is: > > https://patchwork.kernel.org/cover/11312747/ > > --- > > arch/arm64/boot/dts/mediatek/Makefile | 3 + > > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 53 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1069 +++++++++++++++++ > > 6 files changed, 1183 insertions(+) > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > > index 458bbc422a94..ee7aadc94dc6 100644 > > --- a/arch/arm64/boot/dts/mediatek/Makefile > > +++ b/arch/arm64/boot/dts/mediatek/Makefile > > @@ -7,4 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > > Alphabetical order, so those three before mt8173-evb.dtb > > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > new file mode 100644 > > index 000000000000..a3616bc3d859 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > @@ -0,0 +1,27 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2019 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm-hana.dtsi" > > + > > +/ { > > + model = "Mediatek Hana rev7 board"; > > + compatible = "google,hana-rev7", "mediatek,mt8173"; > > +}; > > + > > +&cpu_thermal { > > + trips { > > + cpu_crit: cpu_crit@0 { > > + temperature = <100000>; > > + type = "critical"; > > + }; > > + }; > > +}; > > + > > +&gpio_keys { > > + /delete-node/tablet_mode; > > + /delete-node/volume_down; > > + /delete-node/volume_up; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > new file mode 100644 > > index 000000000000..8cbcc75192e3 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > @@ -0,0 +1,16 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm-hana.dtsi" > > + > > +/ { > > + model = "Mediatek Hana rev0 board"; > > + compatible = "google,hana-rev6", > > + "google,hana-rev5", "google,hana-rev4", > > + "google,hana-rev3", "google,hana-rev2", > > + "google,hana-rev1", "google,hana-rev0", > > + "google,hana", "mediatek,mt8173"; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > new file mode 100644 > > index 000000000000..26de3133c1b7 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > @@ -0,0 +1,53 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include "mt8173-elm.dtsi" > > + > > +&i2c_tunnel { > > + google,limited-passthrough; > > I don't think this exists in mainline. In such case you should remove this. > > > +}; > > + > > +&i2c0 { > > + clock-frequency = <200000>; > > +}; > > + > > +&i2c3 { > > + touchscreen2: touchscreen@34 { > > + compatible = "melfas,mip4_ts"; > > + reg = <0x34>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > Hmm, so the same Hana revision can go with up to different touchscreens models? > Partners wants to increase touchpad and touchscreen source (they choose synaptics) for hana 300e, and synaptics uses hid-over-i2c driver. > > + > > + touchscreen3: touchscreen@20 { > > + compatible = "hid-over-i2c"; > > + reg = <0x20>; > > + hid-descr-addr = <0x0020>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > +}; > > + > > +&mmc1 { > > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > > +}; > > + > > +&pio { > > + hdmi_mux_pins: hdmi_mux_pins { > > + pins2 { > > + pinmux = ; > > + bias-pull-up; > > + output-high; > > + }; > > + }; > > + > > + mmc1_pins_default: mmc1default { > > + pins_wp { > > + pinmux = ; > > + input-enable; > > + bias-pull-up; > > + }; > > + }; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > new file mode 100644 > > index 000000000000..e5da2355760e > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > @@ -0,0 +1,15 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm.dtsi" > > + > > +/ { > > + model = "Mediatek Elm board"; > > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > > + "google,elm-rev2", "google,elm-rev1", > > + "google,elm", "mediatek,mt8173"; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > new file mode 100644 > > index 000000000000..fca631e88d58 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > @@ -0,0 +1,1069 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include > > +#include > > +#include "mt8173.dtsi" > > + > > +/ { > > + aliases { > > + serial0 = &uart0; > > + serial1 = &uart1; > > + serial2 = &uart2; > > + serial3 = &uart3; > > + }; > > + > > + memory@40000000 { > > + device_type = "memory"; > > + reg = <0 0x40000000 0 0x80000000>; > > + }; > > + > > + backlight_lcd: backlight_lcd { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm0 0 1000000>; > > + brightness-levels = < > > + 0 16 32 48 64 80 96 112 > > + 128 144 160 176 192 208 224 240 > > + 255 > > + >; > > + default-brightness-level = <9>; > > Actually if you don't specify the brightness-levels and the > default-brightness-level the pwm-backlight driver computes a table of levels and > probably you'll have more granularity, did you try to just remove those properties? > If we remove brightness-levels, minimum brightness that can be set from UI would make the screen too dark to see anything. > > > + power-supply = <&bl_fixed_reg>; > > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&disp_pwm0_pins>; > > + status = "okay"; > > + }; > > + > > + bl_fixed_reg: fixedregulator@2 { > > + compatible = "regulator-fixed"; > > + regulator-name = "bl_fixed"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + startup-delay-us = <1000>; > > + enable-active-high; > > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&bl_fixed_pins>; > > + }; > > + > > + chosen { > > + stdout-path = &uart0; > > + }; > > + > > + firmware { > > + chromeos { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&chromeos_write_protect>; > > + write-protect-gpio = <&pio 4 GPIO_ACTIVE_LOW>; > > + }; > > + }; > > + > > This is not upstream, so you can remove it. > > > + gpio_keys: gpio-keys { > > + compatible = "gpio-keys"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&gpio_keys_pins>; > > + > > + lid { > > + label = "Lid"; > > + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > > + linux,code = <0>; /* SW_LID */ > > + linux,input-type = <5>; /* EV_SW */ > > + gpio-key,wakeup; > > + }; > > + > > + power { > > + label = "Power"; > > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > > + linux,code = ; > > + debounce-interval = <30>; > > + gpio-key,wakeup; > > + }; > > + > > + tablet_mode { > > + label = "Tablet_mode"; > > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > > + linux,code = <1>; /* SW_TABLET_MODE */ > > + linux,input-type = <5>; /* EV_SW */ > > + gpio-key,wakeup; > > + }; > > + > > + volume_down { > > + label = "Volume_down"; > > + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > > + linux,code = ; > > + }; > > + > > + volume_up { > > + label = "Volume_up"; > > + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > > + linux,code = ; > > + }; > > + }; > > + > > + panel: panel { > > + compatible = "lg,lp120up1"; > > + power-supply = <&panel_fixed_3v3>; > > + ddc-i2c-bus = <&i2c0>; > > + backlight = <&backlight_lcd>; > > + > > + port { > > + panel_in: endpoint { > > + remote-endpoint = <&ps8640_out>; > > + }; > > + }; > > + }; > > + > > + panel_fixed_3v3: regulator@1 { > > + compatible = "regulator-fixed"; > > + regulator-name = "PANEL_3V3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + enable-active-high; > > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&panel_fixed_pins>; > > + }; > > + > > + ps8640_fixed_1v2: regulator@2 { > > + compatible = "regulator-fixed"; > > + regulator-name = "PS8640_1V2"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-enable-ramp-delay = <2000>; > > + enable-active-high; > > + regulator-boot-on; > > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ps8640_fixed_pins>; > > + }; > > + > > + sdio_fixed_3v3: fixedregulator@0 { > > + compatible = "regulator-fixed"; > > + regulator-name = "3V3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > > + }; > > + > > + sound: sound { > > + compatible = "mediatek,mt8173-rt5650"; > > + mediatek,audio-codec = <&rt5650 &hdmi0>; > > + mediatek,platform = <&afe>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&aud_i2s2>; > > + > > + mediatek,mclk = <1>; > > + codec-capture { > > + sound-dai = <&rt5650 1>; > > + }; > > + }; > > + > > + hdmicon: connector { > > + compatible = "hdmi-connector"; > > + label = "hdmi"; > > + type = "a"; > > + ddc-i2c-bus = <&hdmiddc0>; > > + > > + port { > > + hdmi_connector_in: endpoint { > > + remote-endpoint = <&hdmi0_out>; > > + }; > > + }; > > + }; > > +}; > > + > > +&cec { > > + status = "okay"; > > +}; > > + > > +&cpu0 { > > + proc-supply = <&mt6397_vpca15_reg>; > > +}; > > + > > +&cpu1 { > > + proc-supply = <&mt6397_vpca15_reg>; > > +}; > > + > > +&cpu2 { > > + proc-supply = <&da9211_vcpu_reg>; > > + sram-supply = <&mt6397_vsramca7_reg>; > > +}; > > + > > +&cpu3 { > > + proc-supply = <&da9211_vcpu_reg>; > > + sram-supply = <&mt6397_vsramca7_reg>; > > +}; > > + > > +&cpu_thermal { > > + sustainable-power = <4500>; /* milliwatts */ > > + trips { > > + threshold: trip-point@0 { > > + temperature = <60000>; > > + }; > > + > > + target: trip-point@1 { > > + temperature = <65000>; > > + }; > > + }; > > +}; > > + > > +&dsi0 { > > + status = "okay"; > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + dsi0_out: endpoint { > > + remote-endpoint = <&ps8640_in>; > > + }; > > + }; > > + }; > > +}; > > + > > +&dpi0 { > > + status = "okay"; > > +}; > > + > > +&hdmi0 { > > + status = "okay"; > > + ports { > > + port@1 { > > + reg = <1>; > > + > > + hdmi0_out: endpoint { > > + remote-endpoint = <&hdmi_connector_in>; > > + }; > > + }; > > + }; > > +}; > > + > > +&hdmi_phy { > > + status = "okay"; > > + mediatek,ibias = <0xc>; > > +}; > > + > > +&i2c0 { > > + status = "okay"; > > + > > + rt5650: audio-codec@1a { > > + compatible = "realtek,rt5650"; > > + reg = <0x1a>; > > + avdd-supply = <&mt6397_vgp1_reg>; > > + cpvdd-supply = <&mt6397_vcama_reg>; > > + interrupt-parent = <&pio>; > > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&rt5650_irq>; > > + #sound-dai-cells = <1>; > > + realtek,dmic1-data-pin = <2>; > > + realtek,jd-mode = <2>; > > + }; > > + > > + ps8640: edp-bridge@8 { > > + compatible = "parade,ps8640"; > > + reg = <0x8>; > > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_HIGH>; > > This should be GPIO_ACTIVE_LOW with latest version of the driver sent. > > > + reset-gpios = <&pio 115 GPIO_ACTIVE_HIGH>; > > Same here, GPIO_ACTIVE_LOW. > > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ps8640_pins>; > > + vdd12-supply = <&ps8640_fixed_1v2>; > > + vdd33-supply = <&mt6397_vgp2_reg>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + ps8640_in: endpoint { > > + remote-endpoint = <&dsi0_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + ps8640_out: endpoint { > > + remote-endpoint = <&panel_in>; > > + }; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2c1 { > > + clock-frequency = <1500000>; > > + status = "okay"; > > + > > + da9211: da9211@68 { > > + compatible = "dlg,da9211"; > > + reg = <0x68>; > > + > > + regulators { > > + da9211_vcpu_reg: BUCKA { > > + regulator-name = "VBUCKA"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1310000>; > > + regulator-min-microamp = <2000000>; > > + regulator-max-microamp = <4400000>; > > + regulator-ramp-delay = <10000>; > > + regulator-always-on; > > + regulator-allowed-modes = <0 1>; > > + }; > > + > > + da9211_vgpu_reg: BUCKB { > > + regulator-name = "VBUCKB"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1310000>; > > + regulator-min-microamp = <2000000>; > > + regulator-max-microamp = <3000000>; > > + regulator-ramp-delay = <10000>; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2c2 { > > + status = "okay"; > > + > > + tpm: tpm@20 { > > + compatible = "infineon,slb9645tt"; > > + reg = <0x20>; > > + powered-while-suspended; > > + }; > > +}; > > + > > +&i2c3 { > > + clock-frequency = <400000>; > > + status = "okay"; > > + > > + touchscreen: touchscreen@10 { > > + compatible = "elan,ekth3500"; > > + reg = <0x10>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > +}; > > + > > +&i2c4 { > > + clock-frequency = <400000>; > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&trackpad_irq>; > > + > > + trackpad: trackpad@15 { > > + compatible = "elan,ekth3000"; > > + interrupt-parent = <&pio>; > > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > > + reg = <0x15>; > > + vcc-supply = <&mt6397_vgp6_reg>; > > + wakeup-source; > > + }; > > + > > + trackpad2: trackpad@2c { > > + compatible = "hid-over-i2c"; > > + interrupt-parent = <&pio>; > > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > > + reg = <0x2c>; > > + hid-descr-addr = <0x0020>; > > + wakeup-source; > > + }; > > So two trackpad models for the same ELM revision? > This is for hana 300e only, I'll move it to mt8173-elm-hana.dts > > +}; > > + > > +&mipi_tx0 { > > + status = "okay"; > > +}; > > + > > +&mmc0 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc0_pins_default>; > > + pinctrl-1 = <&mmc0_pins_uhs>; > > + bus-width = <8>; > > + max-frequency = <200000000>; > > + cap-mmc-highspeed; > > + mmc-hs200-1_8v; > > + mmc-hs400-1_8v; > > + cap-mmc-hw-reset; > > + hs400-ds-delay = <0x14015>; > > + mediatek,hs200-cmd-int-delay=<30>; > > + mediatek,hs400-cmd-int-delay=<14>; > > + mediatek,hs400-cmd-resp-sel-rising; > > + vmmc-supply = <&mt6397_vemc_3v3_reg>; > > + vqmmc-supply = <&mt6397_vio18_reg>; > > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > > + non-removable; > > +}; > > + > > +&mmc1 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc1_pins_default>; > > + pinctrl-1 = <&mmc1_pins_uhs>; > > + bus-width = <4>; > > + max-frequency = <200000000>; > > + cap-sd-highspeed; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > > + vmmc-supply = <&mt6397_vmch_reg>; > > + vqmmc-supply = <&mt6397_vmc_reg>; > > +}; > > + > > +&mmc3 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc3_pins_default>; > > + pinctrl-1 = <&mmc3_pins_uhs>; > > + bus-width = <4>; > > + max-frequency = <200000000>; > > + cap-sd-highspeed; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + sdr104-clk-delay = <5>; > > + keep-power-in-suspend; > > + enable-sdio-wakeup; > > + cap-sdio-irq; > > + vmmc-supply = <&sdio_fixed_3v3>; > > + vqmmc-supply = <&mt6397_vgp3_reg>; > > + non-removable; > > + cap-power-off-card; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + btmrvl: btmrvl@2 { > > + compatible = "marvell,sd8897-bt"; > > + reg = <2>; > > + interrupt-parent = <&pio>; > > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > > + marvell,wakeup-pin = /bits/ 16 <0x0d>; > > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > > + }; > > + > > + mwifiex: mwifiex@1 { > > + compatible = "marvell,sd8897"; > > + reg = <1>; > > + interrupt-parent = <&pio>; > > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > > + marvell,wakeup-pin = <3>; > > + marvell,caldata_ed_mac = /bits/ 8 < > > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > > + >; > > + }; > > +}; > > + > > +&nor_flash { > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&nor_gpio1_pins>; > > + bus-width = <8>; > > + max-frequency = <50000000>; > > + non-removable; > > + flash@0 { > > + compatible = "jedec,spi-nor"; > > + reg = <0>; > > + }; > > +}; > > + > > +&pio { > > + aud_i2s2: aud_i2s2 { > > + pins1 { > > + pinmux = , > > + , > > + , > > + , > > + , > > + , > > + ; > > + bias-pull-down; > > + }; > > + }; > > + > > + bl_fixed_pins: bl_fixed_pins { > > + pins1 { > > + pinmux = ; > > + output-low; > > + }; > > + }; > > + > > + bt_wake_pins: bt_wake_pins { > > + pins1 { > > + pinmux = ; > > + bias-pull-up; > > + }; > > + }; > > + > > + chromeos_write_protect: chromeos_write_protect { > > + pins1 { > > + pinmux = ; > > + bias-disable; > > + }; > > + }; > > + > > I don't think this is needed. > > > > + disp_pwm0_pins: disp_pwm0_pins { > > + pins1 { > > + pinmux = ; > > + output-low; > > + }; > > + }; > > + > > + gpio_keys_pins: gpio_keys_pins { > > + volume_pins { > > + pinmux = , > > + ; > > + bias-pull-up; > > + }; > > + > > + tablet_mode_pins { > > + pinmux = ; > > + bias-pull-up; > > + }; > > + }; > > + > > + hdmi_mux_pins: hdmi_mux_pins { > > + pins1 { > > + pinmux = ; > > + }; > > + }; > > + > > + mmc0_pins_default: mmc0default { > > + pins_cmd_dat { > > + pinmux = , > > + , > > + , > > + , > > + , > > + , > > + , > > + , > > + ; > > + bias-pull-up; > > + }; > > + > > + pins_clk { > > + pinmux = ; > > + bias-pull-down; > > + }; > > + > > + pins_rst { > > + pinmux = ; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc1_pins_default: mmc1default { > > + pins_cmd_dat { > > + pinmux = , > > + , > > + , > > + , > > + ; > > + input-enable; > > + drive-strength = ; > > + bias-pull-up = ; > > + }; > > + > > + pins_clk { > > + pinmux = ; > > + bias-pull-down; > > + drive-strength = ; > > + }; > > + > > + pins_insert { > > + pinmux = ; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc3_pins_default: mmc3default { > > + pins_dat { > > + pinmux = , > > + , > > + , > > + ; > > + input-enable; > > + drive-strength = ; > > + bias-pull-up = ; > > + }; > > + > > + pins_cmd { > > + pinmux = ; > > + input-enable; > > + drive-strength = ; > > + bias-pull-up = ; > > + }; > > + > > + pins_clk { > > + pinmux = ; > > + bias-pull-down; > > + drive-strength = ; > > + }; > > + > > + pins_pdn { > > + pinmux = ; > > + output-low; > > + }; > > + }; > > + > > + mmc0_pins_uhs: mmc0 { > > + pins_cmd_dat { > > + pinmux = , > > + , > > + , > > + , > > + , > > + , > > + , > > + , > > + ; > > + input-enable; > > + drive-strength = ; > > + bias-pull-up = ; > > + }; > > + > > + pins_clk { > > + pinmux = ; > > + drive-strength = ; > > + bias-pull-down = ; > > + }; > > + > > + pins_ds { > > + pinmux = ; > > + drive-strength = ; > > + bias-pull-down = ; > > + }; > > + > > + pins_rst { > > + pinmux = ; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc1_pins_uhs: mmc1 { > > + pins_cmd_dat { > > + pinmux = , > > + , > > + , > > + , > > + ; > > + input-enable; > > + drive-strength = ; > > + bias-pull-up = ; > > + }; > > + > > + pins_clk { > > + pinmux = ; > > + drive-strength = ; > > + bias-pull-down = ; > > + }; > > + }; > > + > > + mmc3_pins_uhs: mmc3 { > > + pins_dat { > > + pinmux = , > > + , > > + , > > + ; > > + input-enable; > > + drive-strength = ; > > + bias-pull-up = ; > > + }; > > + > > + pins_cmd { > > + pinmux = ; > > + input-enable; > > + drive-strength = ; > > + bias-pull-up = ; > > + }; > > + > > + pins_clk { > > + pinmux = ; > > + drive-strength = ; > > + bias-pull-down = ; > > + }; > > + }; > > + > > + nor_gpio1_pins: nor { > > + pins1 { > > + pinmux = , > > + , > > + ; > > + input-enable; > > + drive-strength = ; > > + bias-pull-up; > > + }; > > + > > + pins2 { > > + pinmux = ; > > + drive-strength = ; > > + bias-pull-up; > > + }; > > + > > + pins_clk { > > + pinmux = ; > > + input-enable; > > + drive-strength = ; > > + bias-pull-up; > > + }; > > + }; > > + > > + panel_fixed_pins: panel_fixed_pins { > > + pins1 { > > + pinmux = ; > > + }; > > + }; > > + > > + ps8640_pins: ps8640_pins { > > + pins1 { > > + pinmux = , > > + , > > + ; > > + }; > > + }; > > + > > + ps8640_fixed_pins: ps8640_fixed_pins { > > + pins1 { > > + pinmux = ; > > + }; > > + }; > > + > > + rt5650_irq: rt5650_irq { > > + pins1 { > > + pinmux = ; > > + bias-pull-down; > > + }; > > + }; > > + > > + spi_pins_a: spi1 { > > + pins1 { > > + pinmux = ; > > + bias-pull-up; > > + }; > > + > > + pins_spi { > > + pinmux = , > > + , > > + , > > + ; > > + bias-disable; > > + }; > > + }; > > + > > + trackpad_irq: trackpad_irq { > > + pins1 { > > + pinmux = ; > > + input-enable; > > + bias-pull-up; > > + }; > > + }; > > + > > + usb_pins: usb@0 { > > + pins1 { > > + pinmux = ; > > + output-high; > > + bias-disable; > > + }; > > + }; > > + > > + wifi_wake_pins: wifi_wake_pins { > > + pins1 { > > + pinmux = ; > > + bias-pull-up; > > + }; > > + }; > > +}; > > + > > +&pwm0 { > > + status = "okay"; > > +}; > > + > > +&pwrap { > > + pmic: mt6397 { > > + compatible = "mediatek,mt6397"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + interrupt-parent = <&pio>; > > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + > > + mt6397rtc: mt6397rtc { > > + compatible = "mediatek,mt6397-rtc"; > > + }; > > + > > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > > + "syscon"; > > + reg = <0 0x0000c000 0 0x0108>; > > + }; > > + > > + pio6397: pinctrl@c000 { > > + compatible = "mediatek,mt6397-pinctrl"; > > + pins-are-numbered; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > + > > + mt6397clock: mt6397clock { > > + compatible = "mediatek,mt6397-clk"; > > + #clock-cells = <1>; > > + }; > > + > > + mt6397regulator: mt6397regulator { > > + compatible = "mediatek,mt6397-regulator"; > > + > > + mt6397_vpca15_reg: buck_vpca15 { > > + regulator-compatible = "buck_vpca15"; > > + regulator-name = "vpca15"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + regulator-allowed-modes = <0 1>; > > + }; > > + > > + mt6397_vpca7_reg: buck_vpca7 { > > + regulator-compatible = "buck_vpca7"; > > + regulator-name = "vpca7"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-enable-ramp-delay = <115>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vsramca15_reg: buck_vsramca15 { > > + regulator-compatible = "buck_vsramca15"; > > + regulator-name = "vsramca15"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vsramca7_reg: buck_vsramca7 { > > + regulator-compatible = "buck_vsramca7"; > > + regulator-name = "vsramca7"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vcore_reg: buck_vcore { > > + regulator-compatible = "buck_vcore"; > > + regulator-name = "vcore"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vgpu_reg: buck_vgpu { > > + regulator-compatible = "buck_vgpu"; > > + regulator-name = "vgpu"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-enable-ramp-delay = <115>; > > + }; > > + > > + mt6397_vdrm_reg: buck_vdrm { > > + regulator-compatible = "buck_vdrm"; > > + regulator-name = "vdrm"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1400000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vio18_reg: buck_vio18 { > > + regulator-compatible = "buck_vio18"; > > + regulator-name = "vio18"; > > + regulator-min-microvolt = <1620000>; > > + regulator-max-microvolt = <1980000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vtcxo_reg: ldo_vtcxo { > > + regulator-compatible = "ldo_vtcxo"; > > + regulator-name = "vtcxo"; > > + regulator-always-on; > > + }; > > + > > + mt6397_va28_reg: ldo_va28 { > > + regulator-compatible = "ldo_va28"; > > + regulator-name = "va28"; > > + }; > > + > > + mt6397_vcama_reg: ldo_vcama { > > + regulator-compatible = "ldo_vcama"; > > + regulator-name = "vcama"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vio28_reg: ldo_vio28 { > > + regulator-compatible = "ldo_vio28"; > > + regulator-name = "vio28"; > > + regulator-always-on; > > + }; > > + > > + mt6397_vusb_reg: ldo_vusb { > > + regulator-compatible = "ldo_vusb"; > > + regulator-name = "vusb"; > > + }; > > + > > + mt6397_vmc_reg: ldo_vmc { > > + regulator-compatible = "ldo_vmc"; > > + regulator-name = "vmc"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vmch_reg: ldo_vmch { > > + regulator-compatible = "ldo_vmch"; > > + regulator-name = "vmch"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > > + regulator-compatible = "ldo_vemc3v3"; > > + regulator-name = "vemc_3v3"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp1_reg: ldo_vgp1 { > > + regulator-compatible = "ldo_vgp1"; > > + regulator-name = "vcamd"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <240>; > > + }; > > + > > + mt6397_vgp2_reg: ldo_vgp2 { > > + regulator-compatible = "ldo_vgp2"; > > + regulator-name = "vcamio"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp3_reg: ldo_vgp3 { > > + regulator-compatible = "ldo_vgp3"; > > + regulator-name = "vcamaf"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp4_reg: ldo_vgp4 { > > + regulator-compatible = "ldo_vgp4"; > > + regulator-name = "vgp4"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp5_reg: ldo_vgp5 { > > + regulator-compatible = "ldo_vgp5"; > > + regulator-name = "vgp5"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3000000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp6_reg: ldo_vgp6 { > > + regulator-compatible = "ldo_vgp6"; > > + regulator-name = "vgp6"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vibr_reg: ldo_vibr { > > + regulator-compatible = "ldo_vibr"; > > + regulator-name = "vibr"; > > + regulator-min-microvolt = <1300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + }; > > + }; > > +}; > > + > > +&spi { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&spi_pins_a>; > > + mediatek,pad-select = <1>; > > + status = "okay"; > > + /* clients */ > > + cros_ec: ec@0 { > > + compatible = "google,cros-ec-spi"; > > + reg = <0x0>; > > + spi-max-frequency = <12000000>; > > + interrupt-parent = <&pio>; > > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > > + google,cros-ec-spi-msg-delay = <500>; > > + > > + i2c_tunnel: i2c-tunnel@0 { > > + compatible = "google,cros-ec-i2c-tunnel"; > > + google,remote-bus = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + battery: sbs-battery@b { > > + compatible = "sbs,sbs-battery"; > > + reg = <0xb>; > > + sbs,i2c-retry-count = <2>; > > + sbs,poll-retry-count = <1>; > > + }; > > + }; > > + > > + i2c_tunnel_b: i2c-tunnel@1 { > > + compatible = "google,cros-ec-i2c-tunnel"; > > + google,remote-bus = <1>; > > For what is used this second i2c tunnel? There is anything connected to it? > It's originally for anx7688. I'll remove it here. > > + }; > > + }; > > +}; > > + > > +&thermal { > > + bank0-supply = <&mt6397_vpca15_reg>; > > + bank1-supply = <&da9211_vcpu_reg>; > > +}; > > + > > +&uart0 { > > + status = "okay"; > > +}; > > + > > +&ssusb { > > + dr_mode = "host"; > > + wakeup-source; > > + vusb33-supply = <&mt6397_vusb_reg>; > > + status = "okay"; > > +}; > > + > > +&usb_host { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&usb_pins>; > > + vusb33-supply = <&mt6397_vusb_reg>; > > + status = "okay"; > > +}; > > + > > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" > > \ No newline at end of file > > > > Thanks, > Enric