devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 0/3] hwmon: (lm75) Add regulator support
@ 2020-10-01 14:57 Alban Bedel
  2020-10-01 14:57 ` [PATCH v4 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml Alban Bedel
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Alban Bedel @ 2020-10-01 14:57 UTC (permalink / raw)
  To: linux-hwmon
  Cc: Jean Delvare, Guenter Roeck, Rob Herring, Liam Girdwood,
	Mark Brown, devicetree, linux-kernel, Alban Bedel

Hi everybody,

this small series add regulator support to the lm75 driver for boards
that don't always power such a sensor. While at it also convert the
DT bindings to yaml.

v2: - Fixed the DT example while converting to YAML
    - Removed the unneeded maxItems from the binding documentation
    - Use dummy regulator insted of explicitly handling missing regulator

v3: - Use a devm action to handle disabling the regulator

v4: - Added the missing `additionalProperties: false` when converting
      the binding documentation to yaml

Alban Bedel (3):
  dt-bindings: hwmon: Convert lm75 bindings to yaml
  dt-bindings: hwmon: Add the +vs supply to the lm75 bindings
  hwmon: (lm75) Add regulator support

 .../devicetree/bindings/hwmon/lm75.txt        | 39 -----------
 .../devicetree/bindings/hwmon/lm75.yaml       | 66 +++++++++++++++++++
 drivers/hwmon/lm75.c                          | 24 +++++++
 3 files changed, 90 insertions(+), 39 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/hwmon/lm75.txt
 create mode 100644 Documentation/devicetree/bindings/hwmon/lm75.yaml

-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v4 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml
  2020-10-01 14:57 [PATCH v4 0/3] hwmon: (lm75) Add regulator support Alban Bedel
@ 2020-10-01 14:57 ` Alban Bedel
  2020-10-06 20:26   ` Rob Herring
  2020-10-06 20:33   ` Guenter Roeck
  2020-10-01 14:57 ` [PATCH v4 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings Alban Bedel
  2020-10-01 14:57 ` [PATCH v4 3/3] hwmon: (lm75) Add regulator support Alban Bedel
  2 siblings, 2 replies; 10+ messages in thread
From: Alban Bedel @ 2020-10-01 14:57 UTC (permalink / raw)
  To: linux-hwmon
  Cc: Jean Delvare, Guenter Roeck, Rob Herring, Liam Girdwood,
	Mark Brown, devicetree, linux-kernel, Alban Bedel

In order to automate the verification of DT nodes convert lm75.txt to
lm75.yaml.

Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
---
v2: Fix the example to pass `make dt_binding_check`
v4: Add the missing additionalProperties: false
---
 .../devicetree/bindings/hwmon/lm75.txt        | 39 ------------
 .../devicetree/bindings/hwmon/lm75.yaml       | 62 +++++++++++++++++++
 2 files changed, 62 insertions(+), 39 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/hwmon/lm75.txt
 create mode 100644 Documentation/devicetree/bindings/hwmon/lm75.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/lm75.txt b/Documentation/devicetree/bindings/hwmon/lm75.txt
deleted file mode 100644
index 273616702c51..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm75.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-*LM75 hwmon sensor.
-
-Required properties:
-- compatible: manufacturer and chip name, one of
-		"adi,adt75",
-		"dallas,ds1775",
-		"dallas,ds75",
-		"dallas,ds7505",
-		"gmt,g751",
-		"national,lm75",
-		"national,lm75a",
-		"national,lm75b",
-		"maxim,max6625",
-		"maxim,max6626",
-		"maxim,max31725",
-		"maxim,max31726",
-		"maxim,mcp980x",
-		"nxp,pct2075",
-		"st,stds75",
-		"st,stlm75",
-		"microchip,tcn75",
-		"ti,tmp100",
-		"ti,tmp101",
-		"ti,tmp105",
-		"ti,tmp112",
-		"ti,tmp175",
-		"ti,tmp275",
-		"ti,tmp75",
-		"ti,tmp75b",
-		"ti,tmp75c",
-
-- reg: I2C bus address of the device
-
-Example:
-
-sensor@48 {
-	compatible = "st,stlm75";
-	reg = <0x48>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
new file mode 100644
index 000000000000..c9a001627945
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lm75.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM75 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    enum:
+      - adi,adt75
+      - dallas,ds1775
+      - dallas,ds75
+      - dallas,ds7505
+      - gmt,g751
+      - national,lm75
+      - national,lm75a
+      - national,lm75b
+      - maxim,max6625
+      - maxim,max6626
+      - maxim,max31725
+      - maxim,max31726
+      - maxim,mcp980x
+      - nxp,pct2075
+      - st,stds75
+      - st,stlm75
+      - microchip,tcn75
+      - ti,tmp100
+      - ti,tmp101
+      - ti,tmp105
+      - ti,tmp112
+      - ti,tmp175
+      - ti,tmp275
+      - ti,tmp75
+      - ti,tmp75b
+      - ti,tmp75c
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@48 {
+        compatible = "st,stlm75";
+        reg = <0x48>;
+      };
+    };
-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v4 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings
  2020-10-01 14:57 [PATCH v4 0/3] hwmon: (lm75) Add regulator support Alban Bedel
  2020-10-01 14:57 ` [PATCH v4 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml Alban Bedel
@ 2020-10-01 14:57 ` Alban Bedel
  2020-10-01 18:08   ` Guenter Roeck
  2020-10-06 20:33   ` Guenter Roeck
  2020-10-01 14:57 ` [PATCH v4 3/3] hwmon: (lm75) Add regulator support Alban Bedel
  2 siblings, 2 replies; 10+ messages in thread
From: Alban Bedel @ 2020-10-01 14:57 UTC (permalink / raw)
  To: linux-hwmon
  Cc: Jean Delvare, Guenter Roeck, Rob Herring, Liam Girdwood,
	Mark Brown, devicetree, linux-kernel, Alban Bedel, Rob Herring

Some boards might have a regulator that control the +VS supply, add it
to the bindings.

Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Acked-by: Rob Herring <robh@kernel.org>
---
v2: Removed the unneeded `maxItems` attribute
---
 Documentation/devicetree/bindings/hwmon/lm75.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
index c9a001627945..96eed5cc7841 100644
--- a/Documentation/devicetree/bindings/hwmon/lm75.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -43,6 +43,9 @@ properties:
   reg:
     maxItems: 1
 
+  vs-supply:
+    description: phandle to the regulator that provides the +VS supply
+
 required:
   - compatible
   - reg
@@ -58,5 +61,6 @@ examples:
       sensor@48 {
         compatible = "st,stlm75";
         reg = <0x48>;
+        vs-supply = <&vs>;
       };
     };
-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v4 3/3] hwmon: (lm75) Add regulator support
  2020-10-01 14:57 [PATCH v4 0/3] hwmon: (lm75) Add regulator support Alban Bedel
  2020-10-01 14:57 ` [PATCH v4 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml Alban Bedel
  2020-10-01 14:57 ` [PATCH v4 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings Alban Bedel
@ 2020-10-01 14:57 ` Alban Bedel
  2020-10-01 18:13   ` Guenter Roeck
  2 siblings, 1 reply; 10+ messages in thread
From: Alban Bedel @ 2020-10-01 14:57 UTC (permalink / raw)
  To: linux-hwmon
  Cc: Jean Delvare, Guenter Roeck, Rob Herring, Liam Girdwood,
	Mark Brown, devicetree, linux-kernel, Alban Bedel

Add regulator support for boards where the sensor first need to be
powered up before it can be used.

Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
---
v2: Rely on dummy regulators instead of explicitly handling missing
    regulator
v3: Use a devm action to handle disabling the regulator
---
 drivers/hwmon/lm75.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index ba0be48aeadd..e9c1f55b2706 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/util_macros.h>
+#include <linux/regulator/consumer.h>
 #include "lm75.h"
 
 /*
@@ -101,6 +102,7 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
 struct lm75_data {
 	struct i2c_client		*client;
 	struct regmap			*regmap;
+	struct regulator		*vs;
 	u8				orig_conf;
 	u8				current_conf;
 	u8				resolution;	/* In bits, 9 to 16 */
@@ -534,6 +536,13 @@ static const struct regmap_config lm75_regmap_config = {
 	.use_single_write = true,
 };
 
+static void lm75_disable_regulator(void *data)
+{
+	struct lm75_data *lm75 = data;
+
+	regulator_disable(lm75->vs);
+}
+
 static void lm75_remove(void *data)
 {
 	struct lm75_data *lm75 = data;
@@ -567,6 +576,10 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	data->client = client;
 	data->kind = kind;
 
+	data->vs = devm_regulator_get(dev, "vs");
+	if (IS_ERR(data->vs))
+		return PTR_ERR(data->vs);
+
 	data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
 	if (IS_ERR(data->regmap))
 		return PTR_ERR(data->regmap);
@@ -581,6 +594,17 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	data->sample_time = data->params->default_sample_time;
 	data->resolution = data->params->default_resolution;
 
+	/* Enable the power */
+	err = regulator_enable(data->vs);
+	if (err) {
+		dev_err(dev, "failed to enable regulator: %d\n", err);
+		return err;
+	}
+
+	err = devm_add_action_or_reset(dev, lm75_disable_regulator, data);
+	if (err)
+		return err;
+
 	/* Cache original configuration */
 	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
 	if (status < 0) {
-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings
  2020-10-01 14:57 ` [PATCH v4 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings Alban Bedel
@ 2020-10-01 18:08   ` Guenter Roeck
  2020-10-05 14:38     ` Rob Herring
  2020-10-06 20:33   ` Guenter Roeck
  1 sibling, 1 reply; 10+ messages in thread
From: Guenter Roeck @ 2020-10-01 18:08 UTC (permalink / raw)
  To: Alban Bedel, linux-hwmon
  Cc: Jean Delvare, Rob Herring, Liam Girdwood, Mark Brown, devicetree,
	linux-kernel, Rob Herring

Hi,

On 10/1/20 7:57 AM, Alban Bedel wrote:
> Some boards might have a regulator that control the +VS supply, add it
> to the bindings.
> 
> Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
> Acked-by: Rob Herring <robh@kernel.org>

I have nothing in my records, and nothing in patchwork, that suggests
that Rob gave this patch an Acked-by:. Please point me to the respective
e-mail.

Patch 1/3 is also missing an Acked-by: or Reviewed-by: from a DT
maintainer.

Thanks,
Guenter

> ---
> v2: Removed the unneeded `maxItems` attribute
> ---
>  Documentation/devicetree/bindings/hwmon/lm75.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
> index c9a001627945..96eed5cc7841 100644
> --- a/Documentation/devicetree/bindings/hwmon/lm75.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
> @@ -43,6 +43,9 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  vs-supply:
> +    description: phandle to the regulator that provides the +VS supply
> +
>  required:
>    - compatible
>    - reg
> @@ -58,5 +61,6 @@ examples:
>        sensor@48 {
>          compatible = "st,stlm75";
>          reg = <0x48>;
> +        vs-supply = <&vs>;
>        };
>      };
> 


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 3/3] hwmon: (lm75) Add regulator support
  2020-10-01 14:57 ` [PATCH v4 3/3] hwmon: (lm75) Add regulator support Alban Bedel
@ 2020-10-01 18:13   ` Guenter Roeck
  0 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2020-10-01 18:13 UTC (permalink / raw)
  To: Alban Bedel, linux-hwmon
  Cc: Jean Delvare, Rob Herring, Liam Girdwood, Mark Brown, devicetree,
	linux-kernel

On 10/1/20 7:57 AM, Alban Bedel wrote:
> Add regulator support for boards where the sensor first need to be
> powered up before it can be used.
> 
> Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
> ---
> v2: Rely on dummy regulators instead of explicitly handling missing
>     regulator
> v3: Use a devm action to handle disabling the regulator
> ---

Second '---' is not needed.

I can not apply patches 1 and 2 of the series since I don't have an
Ack from a DT maintainer, but this one looks good. Applied.

Guenter


>  drivers/hwmon/lm75.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index ba0be48aeadd..e9c1f55b2706 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -17,6 +17,7 @@
>  #include <linux/of.h>
>  #include <linux/regmap.h>
>  #include <linux/util_macros.h>
> +#include <linux/regulator/consumer.h>
>  #include "lm75.h"
>  
>  /*
> @@ -101,6 +102,7 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
>  struct lm75_data {
>  	struct i2c_client		*client;
>  	struct regmap			*regmap;
> +	struct regulator		*vs;
>  	u8				orig_conf;
>  	u8				current_conf;
>  	u8				resolution;	/* In bits, 9 to 16 */
> @@ -534,6 +536,13 @@ static const struct regmap_config lm75_regmap_config = {
>  	.use_single_write = true,
>  };
>  
> +static void lm75_disable_regulator(void *data)
> +{
> +	struct lm75_data *lm75 = data;
> +
> +	regulator_disable(lm75->vs);
> +}
> +
>  static void lm75_remove(void *data)
>  {
>  	struct lm75_data *lm75 = data;
> @@ -567,6 +576,10 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  	data->client = client;
>  	data->kind = kind;
>  
> +	data->vs = devm_regulator_get(dev, "vs");
> +	if (IS_ERR(data->vs))
> +		return PTR_ERR(data->vs);
> +
>  	data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
>  	if (IS_ERR(data->regmap))
>  		return PTR_ERR(data->regmap);
> @@ -581,6 +594,17 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  	data->sample_time = data->params->default_sample_time;
>  	data->resolution = data->params->default_resolution;
>  
> +	/* Enable the power */
> +	err = regulator_enable(data->vs);
> +	if (err) {
> +		dev_err(dev, "failed to enable regulator: %d\n", err);
> +		return err;
> +	}
> +
> +	err = devm_add_action_or_reset(dev, lm75_disable_regulator, data);
> +	if (err)
> +		return err;
> +
>  	/* Cache original configuration */
>  	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
>  	if (status < 0) {
> 


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings
  2020-10-01 18:08   ` Guenter Roeck
@ 2020-10-05 14:38     ` Rob Herring
  0 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2020-10-05 14:38 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Alban Bedel, Linux HWMON List, Jean Delvare, Liam Girdwood,
	Mark Brown, devicetree, linux-kernel

On Thu, Oct 1, 2020 at 1:08 PM Guenter Roeck <linux@roeck-us.net> wrote:
>
> Hi,
>
> On 10/1/20 7:57 AM, Alban Bedel wrote:
> > Some boards might have a regulator that control the +VS supply, add it
> > to the bindings.
> >
> > Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
> > Acked-by: Rob Herring <robh@kernel.org>
>
> I have nothing in my records, and nothing in patchwork, that suggests
> that Rob gave this patch an Acked-by:. Please point me to the respective
> e-mail.

I did on v2.

> Patch 1/3 is also missing an Acked-by: or Reviewed-by: from a DT
> maintainer.

In my queue.

Rob

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml
  2020-10-01 14:57 ` [PATCH v4 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml Alban Bedel
@ 2020-10-06 20:26   ` Rob Herring
  2020-10-06 20:33   ` Guenter Roeck
  1 sibling, 0 replies; 10+ messages in thread
From: Rob Herring @ 2020-10-06 20:26 UTC (permalink / raw)
  To: Alban Bedel
  Cc: Liam Girdwood, Jean Delvare, Rob Herring, linux-kernel,
	linux-hwmon, devicetree, Guenter Roeck, Mark Brown

On Thu, 01 Oct 2020 16:57:36 +0200, Alban Bedel wrote:
> In order to automate the verification of DT nodes convert lm75.txt to
> lm75.yaml.
> 
> Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
> ---
> v2: Fix the example to pass `make dt_binding_check`
> v4: Add the missing additionalProperties: false
> ---
>  .../devicetree/bindings/hwmon/lm75.txt        | 39 ------------
>  .../devicetree/bindings/hwmon/lm75.yaml       | 62 +++++++++++++++++++
>  2 files changed, 62 insertions(+), 39 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/hwmon/lm75.txt
>  create mode 100644 Documentation/devicetree/bindings/hwmon/lm75.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml
  2020-10-01 14:57 ` [PATCH v4 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml Alban Bedel
  2020-10-06 20:26   ` Rob Herring
@ 2020-10-06 20:33   ` Guenter Roeck
  1 sibling, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2020-10-06 20:33 UTC (permalink / raw)
  To: Alban Bedel
  Cc: linux-hwmon, Jean Delvare, Rob Herring, Liam Girdwood,
	Mark Brown, devicetree, linux-kernel

On Thu, Oct 01, 2020 at 04:57:36PM +0200, Alban Bedel wrote:
> In order to automate the verification of DT nodes convert lm75.txt to
> lm75.yaml.
> 
> Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---

Applied to hwmon-next.

Thanks,
Guenter

> v2: Fix the example to pass `make dt_binding_check`
> v4: Add the missing additionalProperties: false
> ---
>  .../devicetree/bindings/hwmon/lm75.txt        | 39 ------------
>  .../devicetree/bindings/hwmon/lm75.yaml       | 62 +++++++++++++++++++
>  2 files changed, 62 insertions(+), 39 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/hwmon/lm75.txt
>  create mode 100644 Documentation/devicetree/bindings/hwmon/lm75.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/lm75.txt b/Documentation/devicetree/bindings/hwmon/lm75.txt
> deleted file mode 100644
> index 273616702c51..000000000000
> --- a/Documentation/devicetree/bindings/hwmon/lm75.txt
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -*LM75 hwmon sensor.
> -
> -Required properties:
> -- compatible: manufacturer and chip name, one of
> -		"adi,adt75",
> -		"dallas,ds1775",
> -		"dallas,ds75",
> -		"dallas,ds7505",
> -		"gmt,g751",
> -		"national,lm75",
> -		"national,lm75a",
> -		"national,lm75b",
> -		"maxim,max6625",
> -		"maxim,max6626",
> -		"maxim,max31725",
> -		"maxim,max31726",
> -		"maxim,mcp980x",
> -		"nxp,pct2075",
> -		"st,stds75",
> -		"st,stlm75",
> -		"microchip,tcn75",
> -		"ti,tmp100",
> -		"ti,tmp101",
> -		"ti,tmp105",
> -		"ti,tmp112",
> -		"ti,tmp175",
> -		"ti,tmp275",
> -		"ti,tmp75",
> -		"ti,tmp75b",
> -		"ti,tmp75c",
> -
> -- reg: I2C bus address of the device
> -
> -Example:
> -
> -sensor@48 {
> -	compatible = "st,stlm75";
> -	reg = <0x48>;
> -};
> diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
> new file mode 100644
> index 000000000000..c9a001627945
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/lm75.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LM75 hwmon sensor
> +
> +maintainers:
> +  - Jean Delvare <jdelvare@suse.com>
> +  - Guenter Roeck <linux@roeck-us.net>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,adt75
> +      - dallas,ds1775
> +      - dallas,ds75
> +      - dallas,ds7505
> +      - gmt,g751
> +      - national,lm75
> +      - national,lm75a
> +      - national,lm75b
> +      - maxim,max6625
> +      - maxim,max6626
> +      - maxim,max31725
> +      - maxim,max31726
> +      - maxim,mcp980x
> +      - nxp,pct2075
> +      - st,stds75
> +      - st,stlm75
> +      - microchip,tcn75
> +      - ti,tmp100
> +      - ti,tmp101
> +      - ti,tmp105
> +      - ti,tmp112
> +      - ti,tmp175
> +      - ti,tmp275
> +      - ti,tmp75
> +      - ti,tmp75b
> +      - ti,tmp75c
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      sensor@48 {
> +        compatible = "st,stlm75";
> +        reg = <0x48>;
> +      };
> +    };

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings
  2020-10-01 14:57 ` [PATCH v4 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings Alban Bedel
  2020-10-01 18:08   ` Guenter Roeck
@ 2020-10-06 20:33   ` Guenter Roeck
  1 sibling, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2020-10-06 20:33 UTC (permalink / raw)
  To: Alban Bedel
  Cc: linux-hwmon, Jean Delvare, Rob Herring, Liam Girdwood,
	Mark Brown, devicetree, linux-kernel, Rob Herring

On Thu, Oct 01, 2020 at 04:57:37PM +0200, Alban Bedel wrote:
> Some boards might have a regulator that control the +VS supply, add it
> to the bindings.
> 
> Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
> Acked-by: Rob Herring <robh@kernel.org>

Applied to hwmon-next.

Thanks,
Guenter

> ---
> v2: Removed the unneeded `maxItems` attribute
> ---
>  Documentation/devicetree/bindings/hwmon/lm75.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
> index c9a001627945..96eed5cc7841 100644
> --- a/Documentation/devicetree/bindings/hwmon/lm75.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
> @@ -43,6 +43,9 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  vs-supply:
> +    description: phandle to the regulator that provides the +VS supply
> +
>  required:
>    - compatible
>    - reg
> @@ -58,5 +61,6 @@ examples:
>        sensor@48 {
>          compatible = "st,stlm75";
>          reg = <0x48>;
> +        vs-supply = <&vs>;
>        };
>      };

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2020-10-06 20:33 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-01 14:57 [PATCH v4 0/3] hwmon: (lm75) Add regulator support Alban Bedel
2020-10-01 14:57 ` [PATCH v4 1/3] dt-bindings: hwmon: Convert lm75 bindings to yaml Alban Bedel
2020-10-06 20:26   ` Rob Herring
2020-10-06 20:33   ` Guenter Roeck
2020-10-01 14:57 ` [PATCH v4 2/3] dt-bindings: hwmon: Add the +vs supply to the lm75 bindings Alban Bedel
2020-10-01 18:08   ` Guenter Roeck
2020-10-05 14:38     ` Rob Herring
2020-10-06 20:33   ` Guenter Roeck
2020-10-01 14:57 ` [PATCH v4 3/3] hwmon: (lm75) Add regulator support Alban Bedel
2020-10-01 18:13   ` Guenter Roeck

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).