Re: [PATCH 2/3] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator

[Rob Herring <robh+dt@kernel.org>]

On Mon, Jan 13, 2020 at 8:14 AM Beniamin Bia <beniamin.bia@analog.com> wrote:
>
> From: Michael Hennerich <michael.hennerich@analog.com>
>
> Document support for Analog Devices MC425A Step Attenuator.
>
> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
> ---
>  .../bindings/iio/amplifiers/adi,hmc425a.yaml  | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml

Check your bindings with 'make dt_binding_check'. It fails:

Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml:
while scanning a simple key
  in "<unicode string>", line 24, column 5
could not find expected ':'
  in "<unicode string>", line 25, column 5

>
> diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
> new file mode 100644
> index 000000000000..6f4a292395e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HMC425A 6-bit Digital Step Attenuator
> +
> +maintainers:
> +- Michael Hennerich <michael.hennerich@analog.com>
> +
> +description: |
> +  Digital Step Attenuator IIO device with gpio interface.
> +  HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
> +
> +properties:
> +compatible:
> +    enum:
> +    - adi,hmc425a

nit: this should be indented 2 more spaces.

Or use 'const' instead if there's not more similar parts.

> +
> +vcc-supply:
> +    description:
> +    digital voltage regulator (see regulator/regulator.txt)

Text must be indented under the key.

> +    maxItems: 1
> +
> +ctrl-gpios:
> +    description:
> +    Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
> +    connected to the control pins V1-V6.
> +    maxItems: 6
> +
> +required:
> +- compatible
> +- ctrl-gpios
> +
> +examples:
> +- |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    &gpio {
> +    #address-cells = <1>;
> +    #size-cells = <0>;
> +      gpio_hmc425a: hmc425a {
> +        compatible = "adi,hmc425a";
> +        ctrl-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>,
> +          <&gpio 39 GPIO_ACTIVE_HIGH>,
> +          <&gpio 38 GPIO_ACTIVE_HIGH>,
> +          <&gpio 37 GPIO_ACTIVE_HIGH>,
> +          <&gpio 36 GPIO_ACTIVE_HIGH>,
> +          <&gpio 35 GPIO_ACTIVE_HIGH>;
> +
> +        vcc-supply = <&foo>;
> +      };
> +    }
> --
> 2.17.1
>