Re: [PATCH V5 0/8] remoteproc: imx_rproc: support i.MX7ULP/8MN/8MP

[Mathieu Poirier <mathieu.poirier@linaro.org>]

On Thu, 22 Apr 2021 at 19:01, Peng Fan <peng.fan@nxp.com> wrote:
>
> Hi Mathieu,
>
> > Subject: Re: [PATCH V5 0/8] remoteproc: imx_rproc: support
> > i.MX7ULP/8MN/8MP
> >
> > On Wed, Apr 21, 2021 at 10:20:14AM +0800, peng.fan@oss.nxp.com wrote:
> > > From: Peng Fan <peng.fan@nxp.com>
> > >
> > > V5:
> > >  Add R-b tag
> > >  Move the change in detect mode of patch 5 to patch 7 Per Mathieu's
> > > comments
> > >
> > > V4:
> > >  Typo fix
> > >  patch 4: take state as a check condition  patch 5: move regmap
> > > lookup/attach to imx_rproc_detect_mode  patch 6: add
> > > imx_rproc_clk_enable for optional clk  patch 8: use switch/case in
> > > imx_rproc_detect_mode
> > > V3:
> > >  Add A-b tag for Patch 1/2
> > >  Fix the checkpatch warning for Patch 6,8
> > >
> > > V2:
> > >  Patch 1/8, use fsl as vendor, typo fix  Because patchset [1] has v2
> > > version, patch 5,6,7,8 are adapted that  change.
> > >
> > > This patchset is to support i.MX7ULP/8MN/8MP, also includes a patch to
> > > parse fsl,auto-boot
> > >
> >
> > One of the request I had from the last revision was to explicitly list what other
> > patchset this work depends on and what branch it is based of, something I
> > can't find here.
>
> Sorry, that patchset has been merged, so I remove that line.
> I should mention that that patchset has been merged into Linux-next tree.
>

And what branch this set should be applied to is missing.

> >
> > As such I am dropping this set and won't look at another revision before May
> > 22nd.
>
> Ah. Is it just because that the dependency patchset not been mentioned or you
> have issue applying the patchset that delay the patchset for one month?
>

Both.

> Thanks,
> Peng.
>
> >
> > > Peng Fan (8):
> > >   dt-bindings: remoteproc: imx_rproc: add fsl,auto-boot property
> > >   dt-bindings: remoteproc: imx_rproc: add i.MX7ULP support
> > >   dt-bindings: remoteproc: imx_rproc: support i.MX8MN/P
> > >   remoteproc: imx_rproc: parse fsl,auto-boot
> > >   remoteproc: imx_rproc: initial support for mutilple start/stop method
> > >   remoteproc: imx_rproc: make clk optional
> > >   remoteproc: imx_rproc: support i.MX7ULP
> > >   remoteproc: imx_rproc: support i.MX8MN/P
> > >
> > >  .../bindings/remoteproc/fsl,imx-rproc.yaml    |  11 +-
> > >  drivers/remoteproc/imx_rproc.c                | 196
> > +++++++++++++++---
> > >  2 files changed, 173 insertions(+), 34 deletions(-)
> > >
> > > --
> > > 2.30.0
> > >