From: Peng Fan <peng.fan@nxp.com>
To: Adam Ford <aford173@gmail.com>, "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Sascha Hauer" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
dl-linux-imx <linux-imx@nxp.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Lucas Stach" <l.stach@pengutronix.de>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Guido Günther" <agx@sigxcpu.org>, "Marek Vasut" <marex@denx.de>,
"Andrey Smirnov" <andrew.smirnov@gmail.com>,
devicetree <devicetree@vger.kernel.org>,
arm-soc <linux-arm-kernel@lists.infradead.org>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
"Jacky Bai" <ping.bai@nxp.com>,
"Schrempf Frieder" <frieder.schrempf@kontron.de>,
"Abel Vesa" <abel.vesa@nxp.com>
Subject: RE: [PATCH] arm64: dts: imx8mm: add pgc/blk_ctl nodes
Date: Wed, 30 Jun 2021 09:36:47 +0000 [thread overview]
Message-ID: <DB6PR0402MB2760BB01268FBD961F9FF0D288019@DB6PR0402MB2760.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <CAHCN7xKYooBQzREdoa8ybhQUBXxy6RPaFX9rp1keD7_HgnVA9Q@mail.gmail.com>
> Subject: Re: [PATCH] arm64: dts: imx8mm: add pgc/blk_ctl nodes
>
> On Fri, Jun 4, 2021 at 5:37 AM Peng Fan (OSS) <peng.fan@oss.nxp.com>
> wrote:
> >
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > With PGC and BLK-CTL landed, we could add pgc and blk-ctl nodes,
> > because some pgc domain relies on blk-ctl power domain, so they need
> > to be added together.
> >
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > ---
> >
> > V1:
> > Depends on the blk-ctl patchset,
> >
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fcover%2F202105221342
> 49
> > .15322-1-peng.fan%40oss.nxp.com%2F&data=04%7C01%7Cpeng.fan%
> 40nxp.c
> >
> om%7C388c4bd417ff49d393c708d93b02e9f9%7C686ea1d3bc2b4c6fa92cd99
> c5c3016
> >
> 35%7C0%7C0%7C637605705985073021%7CUnknown%7CTWFpbGZsb3d8ey
> JWIjoiMC4wLj
> >
> AwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&
> ;sdata=
> >
> osAlqXkaxQ8qexwmd%2Fh33V0tUpVnT%2Fk7B5kq5vgVRVQ%3D&reser
> ved=0
> >
> > Shawn,
> > Since the blk-ctl patchset is in good shape and tested, is it ok for
> > you to pick up?
> > Thanks
> >
> > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 128
> > ++++++++++++++++++++++
> > 1 file changed, 128 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index e7648c3b8390..0e01ff649956 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -7,6 +7,8 @@
> > #include <dt-bindings/gpio/gpio.h>
> > #include <dt-bindings/input/input.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/power/imx8mm-power.h>
> > +#include <dt-bindings/reset/imx8mq-reset.h>
> > #include <dt-bindings/thermal/thermal.h>
> >
> > #include "imx8mm-pinfunc.h"
> > @@ -609,6 +611,109 @@ src: reset-controller@30390000 {
> > interrupts = <GIC_SPI 89
> IRQ_TYPE_LEVEL_HIGH>;
> > #reset-cells = <1>;
> > };
> > +
> > + gpc: gpc@303a0000 {
> > + compatible = "fsl,imx8mm-gpc";
> > + reg = <0x303a0000 0x10000>;
> > + interrupts = <GIC_SPI 87
> IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-parent = <&gic>;
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > +
> > + pgc {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + pgc_hsiomix:
> power-domain@0 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_HSIOMIX>;
> > + clocks = <&clk
> IMX8MM_CLK_USB1_CTRL_ROOT>;
> > + };
> > +
> > + pgc_pcie:
> power-domain@1 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_PCIE>;
> > + power-domains
> = <&pgc_hsiomix>;
> > + clocks = <&clk
> IMX8MM_CLK_PCIE1_ROOT>;
> > + };
> > +
> > + pgc_otg1:
> power-domain@2 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_OTG1>;
> > + power-domains
> = <&pgc_hsiomix>;
> > + };
> > +
> > + pgc_otg2:
> power-domain@3 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_OTG2>;
> > + power-domains
> = <&pgc_hsiomix>;
> > + };
> > +
>
> Any change you could add the references to pgc_otg1 and pgc_otg2 to their
> respective OTG nodes? Without them, enabling OTG1 or OTG2 can result in a
> hang unless it was started in U-Boot.
Will post v2 to add that, really hope the driver part could be in, then move on.
Thanks,
Peng.
>
> > + pgc_gpumix:
> power-domain@4 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_GPUMIX>;
> > + clocks = <&clk
> IMX8MM_CLK_GPU_BUS_ROOT>,
> > +
> <&clk IMX8MM_CLK_GPU_AHB>;
> > + };
> > +
> > + pgc_gpu:
> power-domain@5 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_GPU>;
> > + clocks = <&clk
> IMX8MM_CLK_GPU_AHB>,
> > +
> <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
> > +
> <&clk IMX8MM_CLK_GPU2D_ROOT>,
> > +
> <&clk IMX8MM_CLK_GPU3D_ROOT>;
> > + resets = <&src
> IMX8MQ_RESET_GPU_RESET>;
> > + power-domains
> = <&pgc_gpumix>;
> > + };
> > +
> > + pgc_vpumix:
> power-domain@6 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_VPUMIX>;
> > + clocks = <&clk
> IMX8MM_CLK_VPU_DEC_ROOT>;
> > + resets = <&src
> IMX8MQ_RESET_VPU_RESET>;
> > + };
> > +
> > + pgc_vpu_g1:
> power-domain@7 {
> > +
> #power-domain-cells = <0>;
> > + power-domains
> =
> > +
> <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_VPUG1>;
> > + clocks = <&clk
> IMX8MM_CLK_VPU_G1_ROOT>;
> > + };
> > +
> > + pgc_vpu_g2:
> power-domain@8 {
> > +
> #power-domain-cells = <0>;
> > + power-domains
> =
> > +
> <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_VPUG2>;
> > + clocks = <&clk
> IMX8MM_CLK_VPU_G2_ROOT>;
> > + };
> > +
> > + pgc_vpu_h1:
> power-domain@9 {
> > +
> #power-domain-cells = <0>;
> > + power-domains
> =
> > +
> <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_VPUH1>;
> > + clocks = <&clk
> IMX8MM_CLK_VPU_H1_ROOT>;
> > + };
> > +
> > + pgc_dispmix:
> power-domain@10 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_DISPMIX>;
> > + clocks = <&clk
> IMX8MM_CLK_DISP_ROOT>,
> > +
> <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> > +
> <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> > + };
> > +
> > + pgc_mipi:
> power-domain@11 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_MIPI>;
> > + power-domains
> =
> > +
> <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;
> > + };
> > + };
> > + };
> > };
> >
> > aips2: bus@30400000 {
> > @@ -960,6 +1065,18 @@ aips4: bus@32c00000 {
> > #size-cells = <1>;
> > ranges = <0x32c00000 0x32c00000
> 0x400000>;
> >
> > + dispmix_blk_ctl: blk_ctl@32e28000 {
> > + compatible =
> "fsl,imx8mm-dispmix-blk-ctl", "syscon";
> > + reg = <0x32e28000 0x100>;
> > + #power-domain-cells = <1>;
> > + #reset-cells = <1>;
> > + power-domains = <&pgc_dispmix>,
> <&pgc_mipi>;
> > + power-domain-names = "dispmix",
> "mipi";
> > + clocks = <&clk
> IMX8MM_CLK_DISP_ROOT>,
> > + <&clk
> IMX8MM_CLK_DISP_AXI_ROOT>,
> > + <&clk
> IMX8MM_CLK_DISP_APB_ROOT>;
> > + };
> > +
> > usbotg1: usb@32e40000 {
> > compatible = "fsl,imx8mm-usb",
> "fsl,imx7d-usb";
> > reg = <0x32e40000 0x200>; @@
> -1029,6
> > +1146,17 @@ gpmi: nand-controller@33002000{
> > status = "disabled";
> > };
> >
> > + vpumix_blk_ctl: blk-ctl@38330000 {
> > + compatible = "fsl,imx8mm-vpumix-blk-ctl",
> "syscon";
> > + reg = <0x38330000 0x100>;
> > + #power-domain-cells = <1>;
> > + #reset-cells = <1>;
> > + power-domains = <&pgc_vpumix>,
> <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_h1>;
> > + power-domain-names = "vpumix", "vpu-g1",
> "vpu-g2", "vpu-h1";
> > + clocks = <&clk
> IMX8MM_CLK_VPU_DEC_ROOT>, <&clk IMX8MM_CLK_VPU_G1_ROOT>,
> > + <&clk
> IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>;
> > + };
> > +
> > gic: interrupt-controller@38800000 {
> > compatible = "arm,gic-v3";
> > reg = <0x38800000 0x10000>, /* GIC Dist */
> > --
> > 2.30.0
> >
prev parent reply other threads:[~2021-06-30 9:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-04 11:10 [PATCH] arm64: dts: imx8mm: add pgc/blk_ctl nodes Peng Fan (OSS)
2021-06-29 13:36 ` Adam Ford
2021-06-29 14:29 ` Fabio Estevam
2021-06-30 9:36 ` Peng Fan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB6PR0402MB2760BB01268FBD961F9FF0D288019@DB6PR0402MB2760.eurprd04.prod.outlook.com \
--to=peng.fan@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=aford173@gmail.com \
--cc=agx@sigxcpu.org \
--cc=andrew.smirnov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=kernel@pengutronix.de \
--cc=krzk@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
--cc=p.zabel@pengutronix.de \
--cc=peng.fan@oss.nxp.com \
--cc=ping.bai@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).