From mboxrd@z Thu Jan 1 00:00:00 1970 From: Po Liu Subject: RE: [PATCH v2 2/2] pci/aer: interrupt fixup in the quirk Date: Fri, 1 Jul 2016 08:46:31 +0000 Message-ID: References: <1464242406-20203-1-git-send-email-po.liu@nxp.com> <1465884747-1517-1-git-send-email-po.liu@nxp.com> <1465884747-1517-2-git-send-email-po.liu@nxp.com> <20160616135420.GA31343@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Po Liu , Bjorn Helgaas Cc: "devicetree@vger.kernel.org" , Arnd Bergmann , Marc Zyngier , "linux-pci@vger.kernel.org" , "linux-kernel@vger.kernel.org" , Stuart Yoder , Minghuan Lian , Murali Karicheri , Mingkai Hu , Roy Zang , Bjorn Helgaas , Yang-Leo Li , Shawn Guo , "linux-arm-kernel@lists.infradead.org" List-Id: devicetree@vger.kernel.org Hi Bjorn, So could we keep it in the pci/quirk.c ? If yes, I would only move the binding description in the documentation into this driver the next version. > -----Original Message----- > From: Po Liu > Sent: Friday, June 17, 2016 11:31 AM > To: 'Bjorn Helgaas' > Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linux-kernel@vger.kernel.org; devicetree@vger.kernel.org; Bjorn Helgaas; > Shawn Guo; Marc Zyngier; Rob Herring; Roy Zang; Mingkai Hu; Stuart Yoder; > Yang-Leo Li; Arnd Bergmann; Minghuan Lian; Murali Karicheri > Subject: RE: [PATCH v2 2/2] pci/aer: interrupt fixup in the quirk > > > > > -----Original Message----- > > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > > Sent: Thursday, June 16, 2016 9:54 PM > > To: Po Liu > > Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > > linux-kernel@vger.kernel.org; devicetree@vger.kernel.org; Bjorn > > Helgaas; Shawn Guo; Marc Zyngier; Rob Herring; Roy Zang; Mingkai Hu; > > Stuart Yoder; Yang-Leo Li; Arnd Bergmann; Minghuan Lian; Murali > > Karicheri > > Subject: Re: [PATCH v2 2/2] pci/aer: interrupt fixup in the quirk > > > > On Tue, Jun 14, 2016 at 02:12:27PM +0800, Po Liu wrote: > > > On some platforms, root port doesn't support MSI/MSI-X/INTx in RC > mode. > > > When chip support the aer interrupt with none MSI/MSI-X/INTx mode, > > > maybe there is interrupt line for aer pme etc. Search the interrupt > > > number in the fdt file. Then fixup the dev->irq with it. > > > > > > Signed-off-by: Po Liu > --- > changes for V2: > > > - Move to the quirk file > > > > > > drivers/pci/quirks.c | 23 +++++++++++++++++++++++ > 1 file > > changed, 23 insertions(+) > > diff --git a/drivers/pci/quirks.c > > b/drivers/pci/quirks.c index > ee72ebe..909d479 100644 > --- > > a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > > > > Is there any possibility of this part being used on different arches, > > or will it only ever be on arm64 (or whatever it is)? If the latter, > > it could go somewhere like arch/arm64/kernel/quirks.c (which doesn't > > exist yet). > > NXP Layerscape1 is base on the arm 32bit design. Also need the fixup. > > > > > > @@ -25,6 +25,7 @@ > > > #include > > > #include > > > #include > > > +#include > > > #include /* isa_dma_bridge_buggy */ > > > #include "pci.h" > > > > > > @@ -4419,3 +4420,25 @@ static void quirk_intel_qat_vf_cap(struct > > pci_dev *pdev) > > > } > > > } > > > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, > > > quirk_intel_qat_vf_cap); > + > +/* If root port doesn't support > > MSI/MSI-X/INTx in RC mode, > + * but use standalone irq. Read the > > device tree for the aer > + * interrupt number. > > > + */ > > > +static void quirk_aer_interrupt(struct pci_dev *dev) { > > > + int ret; > > > + struct device_node *np = NULL; > > > + > > > + if (dev->bus->dev.of_node) > > > + np = dev->bus->dev.of_node; > > > + > > > + if (IS_ENABLED(CONFIG_OF_IRQ) && np) { > > > + ret = of_irq_get_byname(np, "aer"); > > > + if (ret > 0) { > > > + dev->no_msi = 1; > > > + dev->irq = ret; > > > + } > > > + } > > > > What does this mean for the other PCIe services, e.g., PME? I guess > > this makes the existing AER code work unchanged. But I thought PME > > had a similar situation and was connected up to a different interrupt > > than AER was. > > Yes, PME is similar, HP is not support. I think better to disable the > PME service irq in the quirk. > But seems it is no use because quirk fixup is only running in init phase > time(except suspend, resume). > > > > > > +} > > > +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, > > > +quirk_aer_interrupt); > -- > 2.1.0.27.g96db324 > > -- > To > > unsubscribe from this list: send the line "unsubscribe linux-pci" > > > in the body of a message to majordomo@vger.kernel.org More > > majordomo > info at http://vger.kernel.org/majordomo-info.html