From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Stephan Gerhold <stephan@gerhold.net>
Cc: Andy Gross <agross@kernel.org>,
linux-arm-msm@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Maulik Shah <mkshah@codeaurora.org>
Subject: Re: [PATCH v2 2/3] soc: qcom: stats: Add fixed sleep stats offset for older RPM firmwares
Date: Sat, 20 Nov 2021 16:39:55 -0800 [thread overview]
Message-ID: <YZmVW9zqgsycfd+F@ripper> (raw)
In-Reply-To: <20211119213953.31970-3-stephan@gerhold.net>
On Fri 19 Nov 13:39 PST 2021, Stephan Gerhold wrote:
> Not all RPM firmware versions have the dynamic sleep stats offset
> available. Most older versions use a fixed offset of 0xdba0.
> Add support for this using new SoC-specific compatibles for APQ8084,
> MSM8226, MSM8916 and MSM8974.
>
> Even older SoCs seem to use a different offset and stats format.
> If needed those could be supported in the future by adding separate
> compatibles for those with a different stats_config.
>
> Cc: Maulik Shah <mkshah@codeaurora.org>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> Changes in v2:
> - Use SoC-specific compatibles instead of qcom,rpm-legacy-stats
> ---
> drivers/soc/qcom/qcom_stats.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/soc/qcom/qcom_stats.c b/drivers/soc/qcom/qcom_stats.c
> index 131d24caabf8..d6bfd1bbdc2a 100644
> --- a/drivers/soc/qcom/qcom_stats.c
> +++ b/drivers/soc/qcom/qcom_stats.c
> @@ -237,6 +237,15 @@ static const struct stats_config rpm_data = {
> .subsystem_stats_in_smem = false,
> };
>
> +/* Older RPM firmwares have the stats at a fixed offset instead */
> +static const struct stats_config rpm_data_dba0 = {
> + .stats_offset = 0xdba0,
> + .num_records = 2,
> + .appended_stats_avail = true,
> + .dynamic_offset = false,
> + .subsystem_stats_in_smem = false,
> +};
> +
> static const struct stats_config rpmh_data = {
> .stats_offset = 0x48,
> .num_records = 3,
> @@ -246,6 +255,10 @@ static const struct stats_config rpmh_data = {
> };
>
> static const struct of_device_id qcom_stats_table[] = {
> + { .compatible = "qcom,apq8084-rpm-stats", .data = &rpm_data_dba0 },
> + { .compatible = "qcom,msm8226-rpm-stats", .data = &rpm_data_dba0 },
> + { .compatible = "qcom,msm8916-rpm-stats", .data = &rpm_data_dba0 },
> + { .compatible = "qcom,msm8974-rpm-stats", .data = &rpm_data_dba0 },
> { .compatible = "qcom,rpm-stats", .data = &rpm_data },
> { .compatible = "qcom,rpmh-stats", .data = &rpmh_data },
> { }
> --
> 2.34.0
>
next prev parent reply other threads:[~2021-11-21 0:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-19 21:39 [PATCH v2 0/3] Add RPM sleep stats for MSM8916 Stephan Gerhold
2021-11-19 21:39 ` [PATCH v2 1/3] dt-bindings: soc: qcom: stats: Document compatibles with fixed offset Stephan Gerhold
2021-11-21 0:39 ` Bjorn Andersson
2021-11-30 1:47 ` Rob Herring
2021-11-19 21:39 ` [PATCH v2 2/3] soc: qcom: stats: Add fixed sleep stats offset for older RPM firmwares Stephan Gerhold
2021-11-21 0:39 ` Bjorn Andersson [this message]
2021-11-19 21:39 ` [PATCH v2 3/3] arm64: dts: qcom: msm8916: Add RPM sleep stats Stephan Gerhold
2021-12-01 15:13 ` (subset) " Bjorn Andersson
2021-12-01 15:13 ` (subset) [PATCH v2 0/3] Add RPM sleep stats for MSM8916 Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YZmVW9zqgsycfd+F@ripper \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=mkshah@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=stephan@gerhold.net \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).