Re: [PATCH 1/2] dt-bindings: net: dsa: split generic port definition from dsa.yaml

[Rob Herring <robh@kernel.org>]

On Fri, Nov 12, 2021 at 05:57:51PM +0100, Ansuel Smith wrote:
> Some switch may require to add additional binding to the node port.
> Move DSA generic port definition to a dedicated yaml to permit this.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  .../devicetree/bindings/net/dsa/dsa-port.yaml | 70 +++++++++++++++++++
>  .../devicetree/bindings/net/dsa/dsa.yaml      | 54 +-------------
>  2 files changed, 72 insertions(+), 52 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> new file mode 100644
> index 000000000000..258df41c9133
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ethernet Switch port Device Tree Bindings
> +
> +maintainers:
> +  - Andrew Lunn <andrew@lunn.ch>
> +  - Florian Fainelli <f.fainelli@gmail.com>
> +  - Vivien Didelot <vivien.didelot@gmail.com>
> +
> +description:
> +  Ethernet switch port Description
> +
> +properties:
> +  reg:
> +    description: Port number
> +
> +  label:
> +    description:
> +      Describes the label associated with this port, which will become
> +      the netdev name
> +    $ref: /schemas/types.yaml#/definitions/string
> +
> +  link:
> +    description:
> +      Should be a list of phandles to other switch's DSA port. This
> +      port is used as the outgoing port towards the phandle ports. The
> +      full routing information must be given, not just the one hop
> +      routes to neighbouring switches
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +
> +  ethernet:
> +    description:
> +      Should be a phandle to a valid Ethernet device node.  This host
> +      device is what the switch port is connected to
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +  dsa-tag-protocol:
> +    description:
> +      Instead of the default, the switch will use this tag protocol if
> +      possible. Useful when a device supports multiple protocols and
> +      the default is incompatible with the Ethernet device.
> +    enum:
> +      - dsa
> +      - edsa
> +      - ocelot
> +      - ocelot-8021q
> +      - seville
> +
> +  phy-handle: true
> +
> +  phy-mode: true
> +
> +  fixed-link: true
> +
> +  mac-address: true
> +
> +  sfp: true
> +
> +  managed: true
> +
> +required:
> +  - reg
> +
> +additionalProperties: true
> +
> +...
> diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> index 224cfa45de9a..15ea9ef3def9 100644
> --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> @@ -46,58 +46,8 @@ patternProperties:
>          type: object
>          description: Ethernet switch ports
>  
> -        properties:
> -          reg:
> -            description: Port number
> -
> -          label:
> -            description:
> -              Describes the label associated with this port, which will become
> -              the netdev name
> -            $ref: /schemas/types.yaml#/definitions/string
> -
> -          link:
> -            description:
> -              Should be a list of phandles to other switch's DSA port. This
> -              port is used as the outgoing port towards the phandle ports. The
> -              full routing information must be given, not just the one hop
> -              routes to neighbouring switches
> -            $ref: /schemas/types.yaml#/definitions/phandle-array
> -
> -          ethernet:
> -            description:
> -              Should be a phandle to a valid Ethernet device node.  This host
> -              device is what the switch port is connected to
> -            $ref: /schemas/types.yaml#/definitions/phandle
> -
> -          dsa-tag-protocol:
> -            description:
> -              Instead of the default, the switch will use this tag protocol if
> -              possible. Useful when a device supports multiple protocols and
> -              the default is incompatible with the Ethernet device.
> -            enum:
> -              - dsa
> -              - edsa
> -              - ocelot
> -              - ocelot-8021q
> -              - seville
> -
> -          phy-handle: true
> -
> -          phy-mode: true
> -
> -          fixed-link: true
> -
> -          mac-address: true
> -
> -          sfp: true
> -
> -          managed: true
> -
> -        required:
> -          - reg
> -
> -        additionalProperties: false
> +        allOf:
> +          - $ref: dsa-port.yaml#

Don't need 'allOf' here. And you need to add 'unevaluatedProperties: 
false'. With that,

Reviewed-by: Rob Herring <robh@kernel.org>

(This needs to go in net-next to avoid conflicts, but given the 
maintainers didn't apply it already unreviewed they probably expect I 
will apply it.)