Re: [PATCH v2 01/16] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T

[Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

>> +Example for A33:
>>   	ths: ths@1c25000 {
>>   		compatible = "allwinner,sun8i-a33-ths";
>>   		reg = <0x01c25000 0x100>;
>> @@ -17,6 +40,27 @@ Example:
>>   		#io-channel-cells = <0>;
>>   	};
>>   
>> +Example for H3:
>> +	ths: thermal-sensor@1c25000 {
>> +		compatible = "allwinner,sun8i-h3-ths";
>> +		reg = <0x01c25000 0x400>;
>> +		clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
>> +		clock-names = "bus", "mod";
>> +		resets = <&ccu RST_BUS_THS>;
>> +		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
>> +		#thermal-sensor-cells = <0>;
>> +		#io-channel-cells = <0>;
>> +	};
>> +
>> +Example for A83T:
>> +	ths: thermal-sensor@1f04000 {
>> +		compatible = "allwinner,sun8i-a83t-ths";
>> +		reg = <0x01f04000 0x100>;
>> +		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
>> +		#thermal-sensor-cells = <1>;
>> +		#io-channel-cells = <0>;
>> +	};
>> +
> 
> I'm wondering if this is actually needed. We've used this convoluted
> constructs to be compatible with the old driver, but I'm not sure this
> is actually worth it now, and this is causing several issues, among
> which:
>    - We need to have a bunch of quirks to handle all the DT cases.
>    - We need to have an MFD, which isn't really optimal
> 
> So I'd rather introduce a new compatible for the old SoCs, keep the
> old driver around, and simplify a lot that driver code that will ease
> further developments. And we can also get rid of the MFD in the
> process. I discussed it with Quentin, and he was ok with it, what do
> you think?
> 
> (and that would involve creating a new file for the bindings you
> introduce here).
> 
> Maxime
> 

I think this is a good idea, and the desired way to rework the driver.

To sum up what we talked on IRC:

This will end up in removing the MFD driver and moving the interrupt 
handling into the iio driver. At the end this will also simplify the IRQ 
part.

Philipp