* [PATCH 2/2] ARM: dts: utilite-pro: add mmc card slot support
[not found] ` <20160612132046.1363-1-christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
@ 2016-06-12 13:20 ` christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg
[not found] ` <30f2c9e9b50d47d893218811f3223b3f-gtPewvpZjL8umhiu9RXYRl5UTUQ924AY@public.gmane.org>
[not found] ` <b6f3c46c5ae54abdab846effbed6c8fe@rwthex-s1-b.rwth-ad.de>
0 siblings, 2 replies; 3+ messages in thread
From: christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg @ 2016-06-12 13:20 UTC (permalink / raw)
To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
grinberg-UTxiZqZC01RS1MOuV/RT9w, fabio.estevam-3arQi8VN3Tc,
Christopher Spinrath
From: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
The Utilite Pro has a mmc card slot connected to the usdhc3
controller. Add support for it.
Signed-off-by: Christopher Spinrath <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
---
arch/arm/boot/dts/imx6q-utilite-pro.dts | 44 +++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index 7219745..6199063 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -130,6 +130,39 @@
MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
>;
};
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+ >;
+ };
};
&pcie {
@@ -151,3 +184,14 @@
uart-has-rtscts;
status = "okay";
};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ no-1-8-v;
+ broken-cd;
+ keep-power-in-suspend;
+ status = "okay";
+};
--
2.8.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 2/2] ARM: dts: utilite-pro: add mmc card slot support
[not found] ` <30f2c9e9b50d47d893218811f3223b3f-gtPewvpZjL8umhiu9RXYRl5UTUQ924AY@public.gmane.org>
@ 2016-06-12 13:45 ` Fabio Estevam
0 siblings, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2016-06-12 13:45 UTC (permalink / raw)
To: Christopher Spinrath
Cc: Shawn Guo, Sascha Hauer, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King - ARM Linux,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Igor Grinberg, Fabio Estevam
On Sun, Jun 12, 2016 at 10:20 AM, <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org> wrote:
> +&usdhc3 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> + no-1-8-v;
> + broken-cd;
A comment in the commit log as to why you use the 'broken-cd' property
would be helpful.
Thanks
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 2/2] ARM: dts: utilite-pro: add mmc card slot support
[not found] ` <b6f3c46c5ae54abdab846effbed6c8fe-gtPewvpZjL8umhiu9RXYRl5UTUQ924AY@public.gmane.org>
@ 2016-06-12 14:10 ` Christopher Spinrath
0 siblings, 0 replies; 3+ messages in thread
From: Christopher Spinrath @ 2016-06-12 14:10 UTC (permalink / raw)
To: Fabio Estevam
Cc: Shawn Guo, Sascha Hauer, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King - ARM Linux,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Igor Grinberg, Fabio Estevam,
Spinrath, Christopher
Hi Fabio,
On 06/12/2016 03:45 PM, Fabio Estevam wrote:
> On Sun, Jun 12, 2016 at 10:20 AM, <christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org> wrote:
>
>> +&usdhc3 {
>> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
>> + pinctrl-0 = <&pinctrl_usdhc3>;
>> + pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
>> + pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
>> + no-1-8-v;
>> + broken-cd;
>
> A comment in the commit log as to why you use the 'broken-cd' property
> would be helpful.
>
There are no card detection pins (until board revision 1.3; which seems
to be fairly new) and adding "broken-cd" was the only way to get card
detection working on my board. I will add this information to the commit
log.
Thanks,
Christopher
> Thanks
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-06-12 14:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20160612132046.1363-1-christopher.spinrath@rwth-aachen.de>
[not found] ` <20160612132046.1363-1-christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg@public.gmane.org>
2016-06-12 13:20 ` [PATCH 2/2] ARM: dts: utilite-pro: add mmc card slot support christopher.spinrath-vA1bhqPz9FBZXbeN9DUtxg
[not found] ` <30f2c9e9b50d47d893218811f3223b3f-gtPewvpZjL8umhiu9RXYRl5UTUQ924AY@public.gmane.org>
2016-06-12 13:45 ` Fabio Estevam
[not found] ` <b6f3c46c5ae54abdab846effbed6c8fe@rwthex-s1-b.rwth-ad.de>
[not found] ` <b6f3c46c5ae54abdab846effbed6c8fe-gtPewvpZjL8umhiu9RXYRl5UTUQ924AY@public.gmane.org>
2016-06-12 14:10 ` Christopher Spinrath
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).