From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ludovic BARRE Subject: Re: [PATCH 2/6] ARM: stm32: add initial support for STM32MP157 Date: Wed, 13 Dec 2017 10:02:43 +0100 Message-ID: References: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com> <1512742277-28205-3-git-send-email-ludovic.Barre@st.com> <20171212232425.shf56g2uivl57fdp@rob-hp-laptop> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20171212232425.shf56g2uivl57fdp@rob-hp-laptop> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring Cc: Russell King , Linus Walleij , Arnd Bergmann , Maxime Coquelin , Alexandre Torgue , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On 12/13/2017 12:24 AM, Rob Herring wrote: > On Fri, Dec 08, 2017 at 03:11:13PM +0100, Ludovic Barre wrote: >> From: Ludovic Barre >> >> This patch adds initial support of STM32MP157 microprocessor (MPU) >> based on Arm Cortex-A7. Under new ARCH_STM32_MPU flag we select the >> needed Cortex-A infrastructure (like gic, timer,...) >> >> Signed-off-by: Ludovic Barre >> --- >> Documentation/arm/stm32/stm32mp157-overview.txt | 12 ++++++++++++ >> Documentation/devicetree/bindings/arm/stm32.txt | 1 + > > Please split bindings to separate patches. OK, I will split stm32.txt in separate commit > >> arch/arm/mach-stm32/Kconfig | 22 ++++++++++++++++++++-- >> arch/arm/mach-stm32/Makefile | 1 + >> arch/arm/mach-stm32/board-mpu-dt.c | 16 ++++++++++++++++ >> 5 files changed, 50 insertions(+), 2 deletions(-) >> create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt >> create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c >> >> diff --git a/Documentation/arm/stm32/stm32mp157-overview.txt b/Documentation/arm/stm32/stm32mp157-overview.txt >> new file mode 100644 >> index 0000000..8a3e7cb >> --- /dev/null >> +++ b/Documentation/arm/stm32/stm32mp157-overview.txt > > I think new documentation files should be rst format and fit into the > built documentation. We don't have an SoC description doc for most SoCs. the existing documentation of stm32 are txt format -overview.txt -stm32f429-overwiew.txt -stm32f746-overview.txt -stm32h743-overview.txt what do you prefer: -omit stm32mp157-overview.txt of this serie and change all in next commit. -write only this file in rst format -change all in this serie? > >> @@ -0,0 +1,12 @@ >> + STM32MP157 Overview >> + =================== >> + >> + Introduction >> + ------------ >> + The STM32MP157 is a Cortex-A MPU aimed at various applications. >> + It features: >> + - Dual core Cortex-A7 application core >> + - 2D/3D image composition with GPU >> + - Standard memories interface support >> + - Standard connectivity, widely inherited from the STM32 MCU family >> + - Comprehensive security support > > Perhaps make this part of the kconfig entry help. yes, I could add some details in MACH_STM32MP157 kconfig entry > >> diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt >> index 05762b0..6808ed9 100644 >> --- a/Documentation/devicetree/bindings/arm/stm32.txt >> +++ b/Documentation/devicetree/bindings/arm/stm32.txt >> @@ -7,3 +7,4 @@ using one of the following compatible strings: >> st,stm32f469 >> st,stm32f746 >> st,stm32h743 >> + st,stm32mp157 >> diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig >> index c8059ea..2b227c7 100644 >> --- a/arch/arm/mach-stm32/Kconfig >> +++ b/arch/arm/mach-stm32/Kconfig >> @@ -1,12 +1,12 @@ >> menuconfig ARCH_STM32 >> - bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M >> + bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7 >> select ARCH_HAS_RESET_CONTROLLER >> select CLKSRC_STM32 >> select PINCTRL >> select RESET_CONTROLLER >> select STM32_EXTI >> help >> - Support for STMicroelectronics STM32 MCU family >> + Support for STMicroelectronics STM32 MCU/MPU family >> >> if ARCH_STM32 >> >> @@ -40,4 +40,22 @@ config MACH_STM32H743 >> >> endif >> >> +if ARCH_MULTI_V7 >> + >> +config ARCH_STM32_MPU >> + bool "STMicrolectronics STM32 MPU" >> + default y >> + select ARM_GIC >> + select HAVE_ARM_ARCH_TIMER >> + select ARM_PSCI >> + help >> + Support for STMicroelectronics STM32 Microprocessors. >> + >> +config MACH_STM32MP157 > > Is this actually used? Yes, it's used in pinctrl driver. > >> + bool "STMicrolectronics STM32MP157" >> + depends on ARCH_STM32_MPU >> + default y >> + >> +endif >> + >> endif