devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Frank Rowand <frowand.list@gmail.com>
To: Anders Roxell <anders.roxell@linaro.org>, robh@kernel.org
Cc: atull@kernel.org, devicetree@vger.kernel.org,
	geert+renesas@glider.be, linux-kernel@vger.kernel.org,
	pantelis.antoniou@konsulko.com
Subject: Re: [PATCH v2 1/2] of: unittest: add overlay gpio test to catch gpio hog problem
Date: Wed, 25 Mar 2020 20:56:19 -0500	[thread overview]
Message-ID: <b620ddd2-34a5-df5d-310f-4aa2f3e93a4a@gmail.com> (raw)
In-Reply-To: <60024e70-0abc-4a06-cd14-42c61a2d2597@gmail.com>

On 3/13/20 11:40 AM, Frank Rowand wrote:
> Hi Anders,
> 
> On 3/13/20 4:51 AM, Anders Roxell wrote:
>> From: Rob Herring <robh@kernel.org>
>>
>>> On Thu, 20 Feb 2020 12:40:20 -0600, frowand.list@gmail.com wrote:
>>>> From: Frank Rowand <frank.rowand@sony.com>
>>>>
>>>> Geert reports that gpio hog nodes are not properly processed when
>>>> the gpio hog node is added via an overlay reply and provides an
>>>> RFC patch to fix the problem [1].
>>>>
>>>> Add a unittest that shows the problem.  Unittest will report "1 failed"
>>>> test before applying Geert's RFC patch and "0 failed" after applying
>>>> Geert's RFC patch.
>>>>
>>>> [1] https://lore.kernel.org/linux-devicetree/20191230133852.5890-1-geert+renesas@glider.be/
>>>>
>>>> Signed-off-by: Frank Rowand <frank.rowand@sony.com>
>>
>> I'm building arm64 on tag next-20200312, and booting in qemu, and I see
>> this "Kernel panic":
> 
> Thank you for the panic report.
> 
> There has also been an x86_64 failure (with a very different stack trace).
> I am going to investigate the x86_64 failure first.

I have fixed the x86_64 failure:

   https://lore.kernel.org/linux-devicetree/1585187131-21642-1-git-send-email-frowand.list@gmail.com/

Can you check if the two patches in that series fixes the problem that you
are seeing?

Thanks,

Frank


> 
> Can you please send the kernel .config?
> 
> Thanks,
> 
> Frank
> 
> 
>>
>> [...]
>> [  172.779435][    T1] systemd[1]: Mounted POSIX Message Queue File System.
>> [[0;32m  OK  [0m] Mounted POSIX Message Queue File System.
>> [  172.844551][    T1] systemd[1]: Mounted Huge Pages File System.
>> [[0;32m  OK  [0m] Mounted Huge Pages File System.
>> [  172.917332][    T1] systemd[1]: Mounted Debug File System.
>> [[0;32m  OK  [0m] Mounted Debug File System.
>> [  173.465694][  T251] _warn_unseeded_randomness: 6 callbacks suppressed
>> [  173.465803][  T251] random: get_random_u64 called from arch_mmap_rnd+0x94/0xb0 with crng_init=1
>> [  173.466000][  T251] random: get_random_u64 called from randomize_stack_top+0x4c/0xb0 with crng_init=1
>> [  173.466163][  T251] random: get_random_u32 called from arch_align_stack+0x6c/0x88 with crng_init=1
>> [  173.544157][    T1] systemd[1]: Started Create Static Device Nodes in /dev.
>> [[0;32m  OK  [0m] Started Create Static Device Nodes in /dev.
>> [  174.283422][  T240] Unable to handle kernel paging request at virtual address 978061b552800000
>> [  174.286169][  T240] Mem abort info:
>> [  174.303268][  T240]   ESR = 0x96000004
>> [  174.304652][  T240]   EC = 0x25: DABT (current EL), IL = 32 bits
>> [  174.323298][  T240]   SET = 0, FnV = 0
>> [  174.324677][  T240]   EA = 0, S1PTW = 0
>> [  174.325937][  T240] Data abort info:
>> [  174.345383][  T240]   ISV = 0, ISS = 0x00000004
>> [  174.359310][  T240]   CM = 0, WnR = 0
>> [  174.360641][  T240] [978061b552800000] address between user and kernel address ranges
>> [  174.378712][  T240] Internal error: Oops: 96000004 [#1] PREEMPT SMP
>> [  174.381030][  T240] Modules linked in:
>> [  174.382362][  T240] CPU: 0 PID: 240 Comm: systemd-journal Tainted: G    B   W         5.6.0-rc5-next-20200312-00018-g5c00c2e7cf27 #6
>> [  174.386251][  T240] Hardware name: linux,dummy-virt (DT)
>> [  174.388056][  T240] pstate: 40400005 (nZcv daif +PAN -UAO)
>> [  174.389892][  T240] pc : sysfs_kf_seq_show+0x114/0x250
>> [  174.391638][  T240] lr : sysfs_kf_seq_show+0x114/0x250
>> [  174.393325][  T240] sp : ffff00006374faa0
>> [  174.394697][  T240] x29: ffff00006374faa0 x28: ffff000062620040 
>> [  174.396751][  T240] x27: ffff000062b0a010 x26: 978061b552800000 
>> [  174.398779][  T240] x25: ffff000068aae020 x24: ffff000068aae010 
>> [  174.400798][  T240] x23: ffff00006311c000 x22: ffff000064f4f800 
>> [  174.402794][  T240] x21: 0000000000001000 x20: ffff000068aae008 
>> [  174.404820][  T240] x19: 0000000000001000 x18: 0000000000000000 
>> [  174.406792][  T240] x17: 0000000000000000 x16: 0000000000000000 
>> [  174.408814][  T240] x15: 0000000000000000 x14: 0000000000000000 
>> [  174.410805][  T240] x13: ffff80000c623a00 x12: 1fffe0000c623800 
>> [  174.412829][  T240] x11: 1fffe0000c6239ff x10: ffff80000c6239ff 
>> [  174.414821][  T240] x9 : 0000000000000000 x8 : ffff00006311d000 
>> [  174.416865][  T240] x7 : 0000000000000000 x6 : 000000000000003f 
>> [  174.418907][  T240] x5 : 0000000000000040 x4 : 000000000000002d 
>> [  174.420932][  T240] x3 : ffffa000109a1274 x2 : 0000000000000001 
>> [  174.422924][  T240] x1 : ffffa00016010000 x0 : 0000000000000000 
>> [  174.424954][  T240] Call trace:
>> [  174.426097][  T240]  sysfs_kf_seq_show+0x114/0x250
>> [  174.427769][  T240]  kernfs_seq_show+0xa4/0xb8
>> [  174.429306][  T240]  seq_read+0x3a4/0x8e8
>> [  174.430678][  T240]  kernfs_fop_read+0x8c/0x6e0
>> [  174.432244][  T240]  __vfs_read+0x64/0xc0
>> [  174.433622][  T240]  vfs_read+0x158/0x2b0
>> [  174.435014][  T240]  ksys_read+0xfc/0x1e0
>> [  174.436427][  T240]  __arm64_sys_read+0x50/0x60
>> [  174.437944][  T240]  el0_svc_common.constprop.1+0x294/0x330
>> [  174.439795][  T240]  do_el0_svc+0xe4/0x100
>> [  174.441218][  T240]  el0_svc+0x70/0x80
>> [  174.442550][  T240]  el0_sync_handler+0xd0/0x7b4
>> [  174.444143][  T240]  el0_sync+0x164/0x180
>> [  174.445578][  T240] Code: aa1703e0 97f6e03a aa1a03e0 97f6e880 (f9400355) 
>> [  174.447885][  T240] ---[ end trace 5bcb796ff4270d74 ]---
>> [  174.449629][  T240] Kernel panic - not syncing: Fatal exception
>> [  174.451590][  T240] Kernel Offset: disabled
>> [  174.453005][  T240] CPU features: 0x80002,20002004
>> [  174.454597][  T240] Memory Limit: none
>> [  174.455955][  T240] ---[ end Kernel panic - not syncing: Fatal exception ]---
>>
>> When I say CONFIG_OF_UNITTEST=n it works.
>> If I revert there it starts to work when I revert the last one,
>> f4056e705b2e, from the list below:
>>
>> 485bb19d0b3e of: unittest: make gpio overlay test dependent on CONFIG_OF_GPIO
>> 0ac174397940 of: unittest: annotate warnings triggered by unittest
>> f4056e705b2e of: unittest: add overlay gpio test to catch gpio hog problem
>>
>> Cheers,
>> Anders
>>
>>>> ---
>>>>
>>>> changes since v1:
>>>>   - base on 5.6-rc1
>>>>   - fixed node names in overlays
>>>>   - removed unused fields from struct unittest_gpio_dev
>>>>   - of_unittest_overlay_gpio() cleaned up comments
>>>>   - of_unittest_overlay_gpio() moved saving global values into
>>>>     probe_pass_count and chip_request_count more tightly around
>>>>     test code expected to trigger changes in the global values
>>>>
>>>> v1 of this patch incorrectly reported that it had made changes
>>>> since the RFC version, but it was mistakenly created from the
>>>> wrong branch.
>>>>
>>>> There are checkpatch warnings.
>>>>   - New files are in a directory already covered by MAINTAINERS
>>>>   - The undocumented compatibles are restricted to use by unittest
>>>>     and should not be documented under Documentation
>>>>   - The printk() KERN_<LEVEL> warnings are false positives.  The level
>>>>     is supplied by a define parameter instead of a hard coded constant
>>>>   - The lines over 80 characters are consistent with unittest.c style
>>>>
>>>> This unittest was also valuable in that it allowed me to explore
>>>> possible issues related to the proposed solution to the gpio hog
>>>> problem.
>>>>
>>>>
>>>>  drivers/of/unittest-data/Makefile             |   8 +-
>>>>  drivers/of/unittest-data/overlay_gpio_01.dts  |  23 +++
>>>>  drivers/of/unittest-data/overlay_gpio_02a.dts |  16 ++
>>>>  drivers/of/unittest-data/overlay_gpio_02b.dts |  16 ++
>>>>  drivers/of/unittest-data/overlay_gpio_03.dts  |  23 +++
>>>>  drivers/of/unittest-data/overlay_gpio_04a.dts |  16 ++
>>>>  drivers/of/unittest-data/overlay_gpio_04b.dts |  16 ++
>>>>  drivers/of/unittest.c                         | 253 ++++++++++++++++++++++++++
>>>>  8 files changed, 370 insertions(+), 1 deletion(-)
>>>>  create mode 100644 drivers/of/unittest-data/overlay_gpio_01.dts
>>>>  create mode 100644 drivers/of/unittest-data/overlay_gpio_02a.dts
>>>>  create mode 100644 drivers/of/unittest-data/overlay_gpio_02b.dts
>>>>  create mode 100644 drivers/of/unittest-data/overlay_gpio_03.dts
>>>>  create mode 100644 drivers/of/unittest-data/overlay_gpio_04a.dts
>>>>  create mode 100644 drivers/of/unittest-data/overlay_gpio_04b.dts
>>>>
>>>
>>> Applied, thanks.
>>>
>>> Rob
>>
>>
> 
> 


  parent reply	other threads:[~2020-03-26  1:56 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-20 18:40 [PATCH v2 0/2] of: unittest: add overlay gpio test to catch gpio hog problem frowand.list
2020-02-20 18:40 ` [PATCH v2 1/2] " frowand.list
2020-02-26 16:42   ` Rob Herring
2020-03-13 16:40     ` Frank Rowand
2020-03-16  8:45       ` Anders Roxell
2020-03-26  1:56       ` Frank Rowand [this message]
2020-03-26 10:39         ` Anders Roxell
2020-03-26 15:33           ` Frank Rowand
2020-04-08 12:27             ` Anders Roxell
2020-02-20 18:40 ` [PATCH v2 2/2] of: unittest: annotate warnings triggered by unittest frowand.list
2020-02-26 16:42   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b620ddd2-34a5-df5d-310f-4aa2f3e93a4a@gmail.com \
    --to=frowand.list@gmail.com \
    --cc=anders.roxell@linaro.org \
    --cc=atull@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pantelis.antoniou@konsulko.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).