Re: [PATCH v5 5/9] media: staging: rkisp1: remove unecessary clocks

[Helen Koike <helen.koike@collabora.com>]

Hi Rob,

On 10/20/20 12:14 PM, Rob Herring wrote:
> On Wed, Oct 14, 2020 at 11:46 AM Helen Koike <helen.koike@collabora.com> wrote:
>>
>> Hi Rob,
>>
>> Thnaks for your reply.
>>
>> On 9/22/20 11:24 AM, Rob Herring wrote:
>>> On Wed, Jul 22, 2020 at 9:56 AM Helen Koike <helen.koike@collabora.com> wrote:
>>>>
>>>> aclk_isp_wrap is a child of aclk_isp, and hclk_isp_wrap is a child of
>>>> hclk_isp, thus we can remove parents from the list.
>>>>
>>>> Also, for the isp0, we only need the ISP clock, ACLK and HCLK.
>>>> In the future we'll need a pixel clock for RK3288 and RK3399, and a JPEG
>>>> clock for RK3288.
>>>>
>>>> So with the goal to cleanup the dt-bindings and remove it from staging,
>>>> simplify clock names to isp, aclk and hclk.
>>>>
>>>> Assigned clocks are meant to refer to the full path in the clock tree,
>>>> i.e. the leaf in the tree.
>>>> For instance, in RK3399, the clock responsible for ACLK (ISP AXI CLOCK)
>>>> is aclk_isp0_wrapper.
>>>>
>>>> For reference, this is the isp clock topology on RK3399:
>>>>
>>>>  xin24m
>>>>     pll_npll
>>>>        npll
>>>>           clk_isp1
>>>>           clk_isp0
>>>>     pll_cpll
>>>>        cpll
>>>>           aclk_isp1
>>>>              aclk_isp1_noc
>>>>              hclk_isp1
>>>>                 aclk_isp1_wrapper
>>>>                 hclk_isp1_noc
>>>>           aclk_isp0
>>>>              hclk_isp1_wrapper
>>>>              aclk_isp0_wrapper
>>>>              aclk_isp0_noc
>>>>              hclk_isp0
>>>>                 hclk_isp0_wrapper
>>>>                 hclk_isp0_noc
>>>>  pclkin_isp1_wrapper
>>>>
>>>> Signed-off-by: Helen Koike <helen.koike@collabora.com>
>>>>
>>>> ---
>>>> Changes in V5:
>>>> - Use if/then schema as suggested by Rob Herring on
>>>> https://patchwork.linuxtv.org/project/linux-media/patch/20200702191322.2639681-6-helen.koike@collabora.com/#119729
>>>>
>>>> Changes in V4:
>>>> - update binding according to suggestion by Robin Murphy
>>>> on https://patchwork.kernel.org/patch/11475007/
>>>>
>>>> Changes in V3:
>>>> - this is a new patch in the series
>>>> ---
>>>>  .../bindings/media/rockchip-isp1.yaml         | 50 ++++++++++++-------
>>>>  drivers/staging/media/rkisp1/rkisp1-dev.c     |  8 ++-
>>>>  2 files changed, 36 insertions(+), 22 deletions(-)
>>>>
>>>> diff --git a/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>>>> index 62a6b9c959498..23c677d15037a 100644
>>>> --- a/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>>>> +++ b/drivers/staging/media/rkisp1/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>>>> @@ -24,20 +24,10 @@ properties:
>>>>      maxItems: 1
>>>>
>>>>    clocks:
>>>> -    items:
>>>> -      - description: ISP clock
>>>> -      - description: ISP AXI clock clock
>>>> -      - description: ISP AXI clock  wrapper clock
>>>> -      - description: ISP AHB clock clock
>>>> -      - description: ISP AHB wrapper clock
>>>> +    minItems: 3
>>>
>>> You need maxItems here too or it will always be 3.
>>>
>>>>
>>>>    clock-names:
>>>> -    items:
>>>> -      - const: clk_isp
>>>> -      - const: aclk_isp
>>>> -      - const: aclk_isp_wrap
>>>> -      - const: hclk_isp
>>>> -      - const: hclk_isp_wrap
>>>> +    minItems: 3
>>>>
>>>>    iommus:
>>>>      maxItems: 1
>>>> @@ -116,6 +106,34 @@ required:
>>>>    - power-domains
>>>>    - ports
>>>>
>>>> +if:
>>>> +  properties:
>>>> +    compatible:
>>>> +      contains:
>>>> +        const: rockchip,rk3399-cif-isp
>>>> +then:
>>>> +  properties:
>>>> +    clocks:
>>>> +      maxItems: 4
>>>> +      minItems: 3
>>>
>>> For a single compatible you shouldn't really have a variable number of clocks.
>>
>> I'm not entirely sure how to make this separation, since isp0 and isp1 (not yet supported)
>> would use the same compatible.
>> Unless if we separate in two compatibles, but maybe this is an overhead just for an extra clock.
>> What do you think?
> 
> In that case, it's fine.
> 
>>
>>>
>>>> +      items:
>>>> +        # isp0 and isp1
>>>> +        - description: ISP clock
>>>> +        - description: ISP AXI clock
>>>> +        - description: ISP AHB clock
>>>> +        # only for isp1
>>>> +        - description: ISP Pixel clock
>>>> +    clock-names:
>>>> +      maxItems: 4
>>>> +      minItems: 3
>>>> +      items:
>>>> +        # isp0 and isp1
>>>> +        - const: isp
>>>> +        - const: aclk
>>>> +        - const: hclk
>>>> +        # only for isp1
>>>> +        - const: pclk_isp
>>>
>>> Don't you need an 'else' clause. For not rockchip,rk3399-cif-isp,
>>> there's no definition of what clocks there are.
>>
>> There is only one compatible defined for now, rk3288 will be added later.
>> The idea to add if/then is to make it easier to add rk3288:
>>
>> https://patchwork.kernel.org/project/linux-media/patch/20200406073017.19462-4-karthik.poduval@gmail.com/
> 
> Hopefully, the clock names will be aligned? Looks like they are the
> same with just 1 additional clock. Ideally, you define them all at the
> top level and the if/then schema just defines how many clocks for each
> compatible.

I submitted another version, where I try to capture what you suggested here,
please check if I got it right this time (or not).
Maybe I misunderstood which kind of alignment you are expecting for the clock names,
should they be each in a different line?

https://patchwork.linuxtv.org/project/linux-media/patch/20201020193850.1460644-6-helen.koike@collabora.com/

Thanks
Helen