From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: lukasz.luba@arm.com
Cc: kgene@kernel.org, krzk@kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
myungjoo.ham@samsung.com, kyungmin.park@samsung.com,
cw00.choi@samsung.com, robh+dt@kernel.org, mark.rutland@arm.com,
dietmar.eggemann@arm.com
Subject: Re: [PATCH 3/3] ARM: exynos_defconfig: Enable Energy Model framework
Date: Fri, 31 Jan 2020 14:30:13 +0100 [thread overview]
Message-ID: <d14546d5-0cd8-c441-c2be-cdeefc8ebb8d@samsung.com> (raw)
In-Reply-To: <20200127215453.15144-4-lukasz.luba@arm.com>
Hi,
On 1/27/20 10:54 PM, lukasz.luba@arm.com wrote:
> From: Lukasz Luba <lukasz.luba@arm.com>
>
> Enable the Energy Model (EM) brings possibility to use Energy Aware
> Scheduler (EAS). This compiles the EM but does not enable to run EAS in
> default. The EAS only works with SchedUtil - a CPUFreq governor which
> handles direct requests from the scheduler for the frequency change. Thus,
> to make EAS working in default, the SchedUtil governor should be
> configured as default CPUFreq governor. Although, the EAS might be enabled
> in runtime, when the EM is present for CPUs, the SchedUtil is compiled and
> then set as CPUFreq governor, i.e.:
>
> echo schedutil > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
> echo schedutil > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor
>
> To check if EAS is ready to work, the read output from the command below
> should show '1':
> cat /proc/sys/kernel/sched_energy_aware
>
> To disable EAS in runtime simply 'echo 0' to the file above.
>
> Some test results, which stress the scheduler on Odroid-XU3:
> hackbench -l 500 -s 4096
> With mainline code and with this patch set.
>
> The tests have been made with and without CONFIG_PROVE_LOCKING (PL)
> (which is set to =y in default exynos_defconfig)
>
> | this patch set | mainline
> |-----------------------------------------------|---------------
> | performance | SchedUtil | SchedUtil | performance
> | governor | governor | governor | governor
> | | w/o EAS | w/ EAS |
> ----------------|---------------|---------------|---------------|---------------
> hackbench w/ PL | 12.7s | 11.7s | 12.0s | 13.0s - 12.2s
> hackbench w/o PL| 9.2s | 8.1s | 8.2s | 9.2s - 8.4s
Would you happen to have measurements of how much power is
saved by running hackbench using "SchedUtil governor w/ EAS"
instead of "SchedUtil governor w/o EAS"?
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
> ---
> arch/arm/configs/exynos_defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
> index 1db857056992..c0f8ecabc607 100644
> --- a/arch/arm/configs/exynos_defconfig
> +++ b/arch/arm/configs/exynos_defconfig
> @@ -18,6 +18,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
> CONFIG_ARM_APPENDED_DTB=y
> CONFIG_ARM_ATAG_DTB_COMPAT=y
> CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
> +CONFIG_ENERGY_MODEL=y
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
next prev parent reply other threads:[~2020-01-31 13:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-27 21:54 [PATCH 0/3] Enable Odroid-XU3/4 to use Energy Model and Energy Aware Scheduler lukasz.luba
2020-01-27 21:54 ` [PATCH 1/3] ARM: exynos_defconfig: Enable SCHED_MC lukasz.luba
2020-01-31 12:47 ` Krzysztof Kozlowski
2020-01-31 15:59 ` Lukasz Luba
2020-01-31 20:33 ` Krzysztof Kozlowski
2020-01-27 21:54 ` [PATCH 2/3] ARM: dts: exynos: Add Exynos5422 CPU dynamic-power-coefficient information lukasz.luba
2020-01-31 13:05 ` Krzysztof Kozlowski
2020-01-31 16:42 ` Lukasz Luba
2020-01-27 21:54 ` [PATCH 3/3] ARM: exynos_defconfig: Enable Energy Model framework lukasz.luba
2020-01-31 13:16 ` Krzysztof Kozlowski
2020-01-31 17:30 ` Lukasz Luba
2020-01-31 20:41 ` Krzysztof Kozlowski
2020-02-05 12:49 ` Lukasz Luba
2020-02-06 12:59 ` Krzysztof Kozlowski
2020-02-06 14:15 ` Lukasz Luba
2020-01-31 13:30 ` Bartlomiej Zolnierkiewicz [this message]
2020-01-31 13:31 ` Krzysztof Kozlowski
2020-01-31 13:47 ` Bartlomiej Zolnierkiewicz
2020-01-31 13:48 ` Bartlomiej Zolnierkiewicz
2020-01-31 17:38 ` Lukasz Luba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d14546d5-0cd8-c441-c2be-cdeefc8ebb8d@samsung.com \
--to=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dietmar.eggemann@arm.com \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).