[PATCH v2 4/4] [DO NOT MERGE] ARM: dts: sun7i: Enable LVDS Dual-Link on the Cubieboard

[Maxime Ripard <maxime@cerno.tech>]

For the sake of the example, let's enable an LVDS Dual-Link display on a
Cubieboard.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 69 ++++++++++++++++++++++-
 1 file changed, 69 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index b8203e4ef21c..20278a27ec16 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -85,6 +85,49 @@
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	panel: panel {
+		compatible = "panel-lvds";
+		width-mm = <153>;
+		height-mm = <90>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hfront-porch = <88>;
+			hactive = <1920>;
+			hback-porch = <148>;
+			hsync-len = <44>;
+
+			vfront-porch = <4>;
+			vactive = <1080>;
+			vback-porch = <36>;
+			vsync-len = <5>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-even-pixels;
+
+				panel_input_0: endpoint {
+					remote-endpoint = <&tcon0_out_panel>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-odd-pixels;
+
+				panel_input_1: endpoint {
+					remote-endpoint = <&tcon1_out_panel>;
+				};
+			};
+		};
+	};
 };
 
 &ahci {
@@ -218,6 +261,32 @@
 	status = "okay";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_lvds0_pins>;
+	allwinner,lvds-companion = <&tcon1>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		remote-endpoint = <&panel_input_0>;
+	};
+};
+
+&tcon1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_lvds1_pins>;
+	allwinner,lvds-companion = <&tcon0>;
+	status = "okay";
+};
+
+&tcon1_out {
+	tcon1_out_panel: endpoint@0 {
+		remote-endpoint = <&panel_input_1>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;
-- 
git-series 0.9.1